共查询到20条相似文献，搜索用时 452 毫秒
1.
Edge-driven convection 总被引：23，自引：0，他引：23
We consider a series of simple calculations with a step-function change in thickness of the lithosphere and imposed, far-field boundary conditions to illustrate the influence of the lithosphere on mantle flow. We consider the effect of aspect ratio and far-field boundary conditions on the small-scale flow driven by a discontinuity in the thickness of the lithosphere. In an isothermal mantle, with no other outside influences, the basic small-scale flow aligns with the lithosphere such that there is a downwelling at the lithospheric discontinuity (edge-driven flow); however, the pattern of the small-scale flow is strongly dependent on the large-scale thermal structure of a much broader area of the upper mantle. Long-wavelength temperature anomalies in the upper mantle can overwhelm edge-driven flow on a short timescale; however, convective motions work to homogenize these anomalies on the order of 100 million years while cratonic roots can remain stable for longer time periods. A systematic study of the effect of the boundary conditions and aspect ratio of the domain shows that small-scale, and large-scale flows are driven by the lithosphere. Edge-driven flow produces velocities on the order of 20 mm/yr. This is comparable to calculations by others and we can expect an increase in this rate as the mantle viscosity is decreased. 相似文献
2.
Laboratory experiments were performed to study the influence of density and viscosity layering on the formation and stability of plumes. Viscosity ratios ranged from 0.1 to 6400 for buoyancy ratios between 0.3 and 20, and Rayleigh numbers between 105 and 2.108. The presence of a chemically stratified boundary layer generates long-lived thermochemical plumes. These plumes first develop from the interface as classical thermal boundary layer instabilities. As they rise, they entrain by viscous coupling a thin film of the other layer and locally deform the interface into cusps. The interfacial topography and the entrainment act to further anchor the plumes, which persist until the chemical stratification disappears through entrainment, even for Rayleigh numbers around 108. The pattern of thermochemical plumes remains the same during an experiment, drifting only slowly through the tank. Scaled to an Earth’s mantle without plate tectonics, our results show that: (1) thermochemical plumes are expected to exist in the mantle, (2) they could easily survive hundreds of millions of years, depending on the size and magnitude of the chemical heterogeneity on which they are anchored, and (3) their drift velocity would be at most 1-2 mm/yr. They would therefore produce long-lived and relatively fixed hotspots on the lithosphere. However, the thermochemical plumes would follow any large scale motion imposed on the chemical layer. Therefore, the chemical heterogeneity acts more as a ‘floating anchor’ than as an absolute one. 相似文献
3.
The pattern and style of mantle convection govern the thermal evolution, internal dynamics, and large-scale surface deformation of the terrestrial planets. In order to characterize the nature of heat transport and convective behaviour at Rayleigh numbers, Ra, appropriate for planetary mantles (between 104 and 108), we perform a set of laboratory experiments. Convection is driven by a temperature gradient imposed between two rigid surfaces, and there is no internal heating. As the Rayleigh number is increased, two transitions in convective behaviour occur. First we observe a change from steady to time-dependent convection at Ra≈105. A second transition occurs at higher Rayleigh numbers, Ra≈5×106, with large-scale time-dependent flow being replaced by isolated rising and sinking plumes. Corresponding to the latter transition, the exponent β in the power law relating the Nusselt number Nu to the Rayleigh number (NuRaβ) is reduced. Both rising and sinking plumes always consist of plume heads followed by tails. There is no characteristic frequency for the formation of plumes. 相似文献
4.
A. A. Kirdyashkin N. L. Dobretsov A. G. Kirdyashkin 《Izvestiya Physics of the Solid Earth》2009,45(8):684-700
Heat and mass transfer processes in the conduit of a thermochemical plume located beneath an oceanic plate far from a mid-ocean ridge (MOR) proceed under conditions of horizontal convective flows penetrating the plume conduit. In the region of a mantle flow approaching the plume conduit (in the frontal part of the conduit), the mantle material heats and melts. The melt moves through the plume conduit at the average velocity of flow v and is crystallized on the opposite side of the conduit (in the frontal part of the conduit). The heat and the chemical dope transferred by the conduit to the mantle flow are carried away by crystallized mantle material at the velocity v.The local coefficients of heat transfer at the boundary of the plume conduit are theoretically determined and the balance of heat fluxes through the side of the plume conduit per linear meter of the conduit height. The total heat generation rate, transmitted by the Hawaiian plume into the upper and lower mantle, is evaluated. With the use of regular patterns of heat transfer in the lower mantle, which is modeled on the horizontal layer, heated from below and cooled from above, the diameter of the plume source, the kinematic viscosity of the melt in the plume conduit, and the velocity of horizontal lower-mantle flows are evaluated and the dependences of the temperature drop, viscosity and Rayleigh number for the lower mantle on the diameter of the plume source are presented. 相似文献
5.
A. A. Kirdyashkin N. L. Dobretsov A. G. Kirdyashkin 《Izvestiya Physics of the Solid Earth》2008,44(6):456-468
Heat and mass transfer processes in the conduit of a thermochemical plume located beneath an oceanic plate far from a mid-ocean ridge (MOR) proceed under conditions of horizontal convective flows penetrating the plume conduit. In the region of a mantle flow approaching the plume conduit (in the frontal part of the conduit), the mantle material heats and melts. The melt moves through the plume conduit at the average velocity of flow v and is crystallized on the opposite side of the conduit. The heat and the chemical dope transferred by the conduit to the mantle flow are carried away by crystallized mantle material at the velocity v. The main equations of heat and mass transfer are obtained for a thermochemical plume interacting with a horizontal convective mantle flow. The joint multiparameter problem of heat and mass transfer is solved for a thermochemical plume located far from an MOR axis. The dope concentration at the base of the plume is found as a function of the Lewis number. The Lewis numbers and, accordingly, the diffusion coefficients of the chemical dope in the plume conduit far from the MOR axis are determined. 相似文献
6.
将地幔地震波速度异常转换为地幔横向黏度变化(达到3个数量级),在球坐标系下计算了瑞雷数为106、上边界为刚性、下边界为应力自由等温边界条件下的岩石层底部的地幔对流极型和环型应力场.结果表明,地幔对流极型应力场与地表大尺度构造具有良好的对应关系:俯冲带和碰撞带的应力呈现挤压状态,而洋中脊处的应力则呈现拉张状态.地幔对流环... 相似文献
7.
The discrete scale spectrum of the convective flows observed on the Sun has not yet received a convincing explanation. Here, an attempt is made to find conditions for the coexistence of convective flows on various scales in a horizontal fluid layer heated from below, where the thermal diffusivity varies with temperature in such a way that the static temperature difference across a thin sublayer near the upper surface of the layer is many times larger than the temperature variation across the remainder of the layer. The equations of two-dimensional thermal convection are solved numerically in an extended Boussinesq approximation, which admits thermal-diffusivity variations. The no-slip conditions are assumed at the lower boundary of the layer; either no-slip or free-slip conditions, at the upper boundary. In the former case, stable large-scale rolls develop, which experience small deformations under the action of small structures concentrated near the horizontal boundaries. In the latter case, the flow structure is highly variable, different flow scales dominate at different heights, the number of large rolls is not constant, and a sort of intermittency occurs: the enhancement of the small-scale flow component is frequently accompanied by the weakening of the large-scale one, and vice versa. The scale-splitting effects revealed here should manifest themselves in one way or another in the structure of solar convection. 相似文献
8.
动态地幔柱模式被广泛用于讨论地球科学中的一些重要课题,如巨大火成区的成因,冈瓦纳古陆解体的原因,板块内中小尺度动力过程的驱动因素等．但是这个基于实验研究而建立的模式中,忽略了地幔柱尾管特征及其作用．地幔柱尾管内温度和速度分布是研究地幔柱上升过程的必要条件．本文从控制尾管结构的基本方程出发,给出了一个定常轴对称地幔柱温度和速度分布的近似分析解．从而得到尾管结构的基本特征：影响尾管内温度分布的主导因素是地幔柱的热流通量,而尾管内上涌速度的大小则不仅取决于热流通量,主要是取决于地幔粘度随深度的变化方式．结果表明,对弱地幔柱,尾管的热损失可能是不可忽略的,而对强地幔柱,径向质量传递可能是不可忽略的. 相似文献
9.
Based on the former workers study results such as numerical simulation of fluid mechanics,seismic tomography of the whole earth and igneous rocks,the basic characteristics of mantle plumes are summarized in detail,namely the mantle plume,from the D″layer near the core-mantle bouundary(CMB)of 2900 km deep,is characterized by the spape of large head and thin narrow conduit,by the physical property of high temperature and low viscosity.The LIP(large igneous province)is the best exhibition when the mantle plume ascends to the surface.According to the basic characteristics of the mantle plumes and the LIP,as well as the temporal-spatial relationships between the mantle plume and continental breakup,the detailed research on petrology,geochemistry,temporal-spatial distribution,tectonic background of the Cenozoic-Mesozoic igneous rocks and gravity anomaly distribution in East China has been done.As a result,the Mesozoic igneous rocks in Southeast China should not be regarded as an example of typical LIP related to mantle plumes.for their related characteristics are not consitent with those of the typical LIPs related to mantle plumes.The Cenozoic igneous rocks in Northeast China have no the typical characteristics of mantle plumes and hotspots,so the Cenozoic volcanism in Northeast China might have no the direct relationships with the activity of mantle plumes. 相似文献
10.
Mantle plumes control magnetic reversal frequency 总被引：2，自引：0，他引：2
Magnetic reversal frequency correlates inversely with mantle plume activity for the past 150 Ma, as measured by the volume production rate of oceanic plateaus, seamount chains, and continental flood basalts. This inverse correlation is especially striking during the long Cretaceous magnetic normal “superchron”, when mantle plume activity was at a maximum. We suggest that mantle plumes control magnetic reversal frequency by the following sequence of events. Mantle plumes rise from theD″ seismic layer just above the core/mantle boundary, thinningD″ to fuel the plumes. This increases core cooling by allowing heat to be conducted more rapidly across the core/mantle boundary. Outer core convective activity then increases to restore the abnormal heat loss, causing a decrease in magnetic reversal frequency in accord with model predictions for bothα2 andαω dynamos. When core convective activity increases above a critical level, a magnetic superchron results. The pulse of plume activity that caused the Cretaceous superchron resulted in a minimum increase in core heat loss of about 1200 GW over the present-day level, which corresponds to an increase in Joule heat production of about 120 GW within the core. 相似文献
11.
Teresa Mae Lassak Allen K. McNamara Edward J. Garnero Shijie Zhong 《Earth and Planetary Science Letters》2010,289(1-2):232-241
The origin of large low shear-wave velocity provinces (LLSVPs) in the lowermost mantle beneath the central Pacific and Africa is not well constrained. We explore numerical convection calculations for two proposed hypotheses for these anomalies, namely, thermal upwellings (e.g., plume clusters) and large intrinsically dense piles of mantle material (e.g., thermochemical piles), each of which uniquely affects the topography on Earth's core–mantle boundary (CMB). The thermochemical pile models predict a relatively flat but elevated CMB beneath piles (presumed LLSVPs), with strong upwarping along LLSVP margins. The plume cluster models predict CMB upwarping beneath upwellings that are less geographically organized. Both models display CMB depressions beneath subduction related downwelling. While each of the two models produces a unique, characteristic style of CMB topography, we find that seismic models will require shorter length scales than are currently being employed in order to distinguish between the end-member dynamic models presented here. 相似文献
12.
热和组分密度异常共同驱动的动态金幔柱解析模式给出金幔柱在金幔中上升的历史．当金幔柱到达岩石层底时其头部的特征量是5个独立变量的函数：（1）金幔柱起源的深度;（2）金幔粘性系数;（3）源温度异常值;（4）源组分与热密度异常之比;（5）金幔柱的浮力通量．基于新的Mapellan数据,金星表面上有360多个冠状和类冠状构造已被发现,其中65％直径小于300km．这类小型冠状构造被认为是由具有下述特征的较小的金幔柱所形成：（1）最大直径小于300km;（2）当其头部到达岩石层底时,过剩温度足以产生部分熔融层,应高于150K;（3）被冠状构造下面的金幔柱带上来的总浮力有能力支撑冠状构造隆起的总质量．用这3个条件分析数值结果并约束金幔柱的源参数,根据本文的数值实验结果,金星上的小型冠状构造可能是起源于上金幔小于1000km深度的动态金幔柱形成的． 相似文献
13.
在地球表层存在着占地表面积约30%的具有低固有密度、高黏度的大陆岩石圈.由于其特殊的物理化学性质,大陆岩石圈通常不直接参与下方的地幔对流,但其与地幔对流格局有着重要的相互影响.大量研究显示,在中太平洋和非洲的下地幔底部,存在着两块占核幔边界（CMB）面积约20%的高密度热化学异常体（由于其剪切波速度较低,常称作低剪切波速度省（LSVPs））.LSVPs的演化既受地幔对流的影响,同时也影响地幔物质运动的格局和动力学过程.本文系统研究了存在大陆岩石圈,下地幔LSVPs的地幔对流模型.模拟结果显示：（1）当大陆体积较小时,其边缘常伴随着俯冲,大陆区域地幔常处于下涌状态,其上地幔温度较低,大陆岩石圈在水平方向处于压应力状态.随着大陆体积的增大,大陆边缘的俯冲逐渐减弱,大陆区域地幔由下涌转为上涌,其上地幔温度较高,大陆岩石圈水平方向处于拉应力状态.（2） 岩石圈与软流圈边界（LAB）在大陆下方较深,温度较低;在海洋区域较浅,温度较高.随着大陆体积的增大,陆洋之间LAB深度、温度的差异逐渐减小.（3）大陆区域地幔底部LSVPs物质的丰度与大陆的体积呈正相关.当大陆体积较小时,大陆下方的LSVPs丰度比海洋区域少.随着大陆体积的增大,大陆下方LSVPs的丰度逐渐增大.（4）海洋地区地表热流高,且随时间波动大,大陆地区地表热流低,随时间波动较小;LSVPs区域的核幔边界热流低. 相似文献
14.
Wolfgang R. Jacoby 《Pure and Applied Geophysics》1978,116(6):1231-1249
A one-dimensional model of flow between a fixed boundary at the bottom and a moving one on top with no net flow through vertical sections is tested for geophysically interesting mantle viscosity-depth functions. Such a model, although simplistic, may help in answering the question to what depth the return flow extends, at least in the case of moving plates measuring many thousand kilometers across, such as the Pacific plate.It the viscosity in the asthenosphere is less than three orders of magnitude smaller than that of the mantle below, the return flow extends to great depth and the asthenosphere is a zone of concentrated shear. If the viscosity contrast is greater, the return flow is concentrated in the asthenosphere. For a wide range of model parameters typical flow velocities below the asthenosphere are about one-tenth of the plate velocity. The pressure gradient required by the mantle flow may be manifest in gravity trends across moving plates, but no excessive gravity anomalies are required by the model if the absolute viscosity values conform to those inferred from post-glacial rebound data. A thinner and lower-viscosity layer is favored over a thicker and more viscous layer if both fit glacial rebound evidence. The present model may not be applicable if down to the core the viscosity is as low as about 1021 N s m–2 with a free-slip bottom boundary. 相似文献
15.
Plume-lithosphere interactions in the ocean basins: constraints from the source mineralogy 总被引：1，自引：0，他引：1
Trace element relationships of near-primary alkalic lavas from La Grille volcano, Grande Comore, in the Indian Ocean, as well as those of the Honolulu volcanic series, Oahu, Hawaii, show that their sources contain amphibole and/or phlogopite. Small amounts of each mineral (2% amphibole in the source of La Grille and 0.5% phlogopite plus some amphibole in the source of the Honolulu volcanics) and a range of absolute degrees of partial melting from 1 to 5% for both series are consistent with the observed trace element variation. Amphibole and phlogopite are not stable at the temperatures of convecting upper mantle or upwelling thermal plumes from the deep mantle; however, they are stable at pressure-temperature conditions of the oceanic lithospheric mantle. Therefore, the presence of amphibole and/or phlogopite in the magma source region of volcanics is strong evidence for lithospheric melting, and we conclude that the La Grille and the Honolulu series formed by melting of the oceanic lithospheric mantle.
The identification of amphibole ± phlogopite in the source region of both series implies that the metasomatism by fluids or volatile-rich melts occurred prior to melting. The presence of hydrous phases results in a lower solidus temperature of the lithospheric mantle, which can be reached by conductive heating by the thermal plumes. Isotope ratios of the La Grille and the Honolulu series display a restricted range in composition and represent compositional end-members for each island. Larger isotopic variations in shield lavas, represented by the contemporaneous Karthala volcano on Grande Comore and the older Koolau series on Oahu, reflect interaction of the upwelling thermal plumes with the lithospheric mantle rather than the heterogeneity of deep-seated mantle plume sources or entrainment of mantle material in the rising plume. Literature OsSr isotope ratio covariations constrain the process of plume-lithosphere interaction as occurring through mixing of plume melts and low-degree melts from the metasomatized oceanic lithospheric mantle.
The characterization of the lithospheric mantle signature allows the isotopic composition of the deep mantle plume components to be identified, and mixing relationships show that the Karthala and Koolau plume end-members have nearly uniform isotopic compositions. Based on independent arguments, isotopic variations on Heard and Easter islands have been shown to be a result of mixing between deep plume sources having distinct isotopic compositions with lithosphere or shallow asthenospheric mantle. To the extent that these case studies are representative of oceanic island volcanism, they indicate that interaction with oceanic lithospheric mantle plays an important role in the compositions of lavas erupted during the shield-building stage of plume magmatism, and that isotopic compositions of deep mantle plume sources are nearly uniform on the scale that they are sampled by melting. 相似文献
16.
If the interpretation of the D″ layer at the base of the mantle as a thermal boundary layer, with a temperature increment in the order of 800 K, is correct, then the formation of deep-mantle plumes to vent material from it appears inevitable. We demonstrate quantitatively that the strong temperature dependence of viscosity guides the upward flow into long-lived chimneys that are ～ 20 km in diameter near the base of the mantle and decrease in width with progressive upward softening and partial melting of plume material. The speed of flow up the axis of the plume is correspondingly fast; 1.6 m y?1 at the base and 4.8 m y?1 at 670 km depth. Thermal diffusive spreading of a heated plume is compensated by a slow horizontal convergence of mantle material toward the chimney in response to the lower pressure there. This convergence, which contributes only a small increment to the flux of material up the plume, also serves to throttle the flow in the chimney. The global plume mass flux necessary to transport 1.6 × 1012 W of core heat upward through the mantle is 1.8 × 106 kg s?1. At its base, plume material is probably still significantly below its solidus or eutectic temperature, but substantial partial melting is very likely as it rises. We speculate that a small fraction of this fluid component eventually emerges at the surface in “hot spots”, with the fate of the remainder being unknown. The behaviour and properties of D″ and of plumes are closely coupled. Not only are plumes a necessary consequence of a thermal boundary layer, but their existence is impossible without that layer. 相似文献
17.
The ∼0.2 mm/yr uplift of Hawaiian islands Lanai and Molokai and Hawaiian swell topography pose important constraints on the structure and dynamics of mantle plumes. We have formulated 3-D models of mantle convection to investigate the effects of plume-plate interactions on surface vertical motions and swell topography. In our models, the controlling parameters are plume radius, excess plume temperature, and upper mantle viscosity. We have found that swell height and swell width constraints limit the radius of the Hawaiian plume to be smaller than 70 km. The additional constraint from the uplift at Lanai requires excess plume temperature to be greater than 400 K. If excess plume temperature is 400 K, models with plume radius between 50 and 70 km and upper mantle viscosity between 1020 and 3×1020 Pa s satisfy all the constraints. Our results indicate that mantle plume in the upper mantle may be significantly hotter than previously suggested. This has important implications for mantle convection and mantle melting. In addition to constraining plume dynamics, our models also provide a mechanism to produce the observed uplift at Lanai and Molokai that has never been satisfactorily explained before. 相似文献
18.
Introduction The northwest of China includes Tarim, Junggar and Qaidam basins, and Kunlun, Tianshan, Altun and Qilian mountains, as well as the north part of the Tibetan Plateau. For a long time, the study of lithosphere structures and dynamics in this area has been a popular topic in geoscience, and has yielded many results. For example, TANG (1994) and LI et al (1998) suppose that the tectonic structure of Tarim Basin is various with geological periods, which changes many times betwee… 相似文献
19.
V. P. Trubitsyn A. N. Evseev M. N. Evseev E. V. Kharybin 《Izvestiya Physics of the Solid Earth》2011,47(12):1027-1033
The process of multiple self-nucleation and ascent of mantle plumes is studied in the numerical models of thermal convection.
The plumes are observed even in the simplest isoviscous models of thermal convection that leave aside the more complex rheology
of the material, thermochemical effects, phase transformations, etc., which, although controlling the features of plumes,
are not necessary for their formation. The origin of plumes is mainly due to the instability of the mantle flows at highly
intense (low-viscous) thermal convection. At high viscosity, convective flows form regular cells. As viscosity decreases,
the ascending and descending flows become narrower and unsteady. At a further decrease in viscosity, the ascending plumes
assume a mushroom-like shape and occasionally change their position in the mantle. The lifetime of each flow can attain 100
Ma. Using markers allows visualizing the evolution of the shape of the mantle plumes. 相似文献
20.
Rongshan Fu Jianhua Huang Jun Liu Xiaohua Chang National Geophysical Observatory at Mengcheng Mengcheng China Key Laboratory of Crust-Mantle Materials Environments Chinese Academy of Science Hefei China School of Earth Space Science University of Science Technology of China China 《地震学报(英文版)》2009,(4):323-329
Geodynamic studies have shown that mantle convection is like a giant blender to make the original heterogeneous mantle mixing and homogenizing. However,some models,especially from geochemical data show that the modern mantle may still contain a number of reservoir bodies with different chemical composition. Then,the modern mantle is homogeneous? Authors have defined a box replacement degree of convective mantle mixing and pervasion degree of convective mantle mixing (that equals to initial density of tracin... 相似文献