首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 281 毫秒
1.
Hydraulic conductivity distribution and plume initial source condition are two important factors affecting solute transport in heterogeneous media. Since hydraulic conductivity can only be measured at limited locations in a field, its spatial distribution in a complex heterogeneous medium is generally uncertain. In many groundwater contamination sites, transport initial conditions are generally unknown, as plume distributions are available only after the contaminations occurred. In this study, a data assimilation method is developed for calibrating a hydraulic conductivity field and improving solute transport prediction with unknown initial solute source condition. Ensemble Kalman filter (EnKF) is used to update the model parameter (i.e., hydraulic conductivity) and state variables (hydraulic head and solute concentration), when data are available. Two-dimensional numerical experiments are designed to assess the performance of the EnKF method on data assimilation for solute transport prediction. The study results indicate that the EnKF method can significantly improve the estimation of the hydraulic conductivity distribution and solute transport prediction by assimilating hydraulic head measurements with a known solute initial condition. When solute source is unknown, solute prediction by assimilating continuous measurements of solute concentration at a few points in the plume well captures the plume evolution downstream of the measurement points.  相似文献   

2.
A data assimilation method is developed to calibrate a heterogeneous hydraulic conductivity field conditioning on transient pumping test data. The ensemble Kalman filter (EnKF) approach is used to update model parameters such as hydraulic conductivity and model variables such as hydraulic head using available data. A synthetical two-dimensional flow case is used to assess the capability of the EnKF method to calibrate a heterogeneous conductivity field by assimilating transient flow data from observation wells under different hydraulic boundary conditions. The study results indicate that the EnKF method will significantly improve the estimation of the hydraulic conductivity field by assimilating continuous hydraulic head measurements and the hydraulic boundary condition will significantly affect the simulation results. For our cases, after a few data assimilation steps, the assimilated conductivity field with four Neumann boundaries matches the real field well while the assimilated conductivity field with mixed Dirichlet and Neumann boundaries does not. We found in our cases that the ensemble size should be 300 or larger for the numerical simulation. The number and the locations of the observation wells will significantly affect the hydraulic conductivity field calibration.  相似文献   

3.
A localized ensemble Kalman filter (EnKF) method is developed to assimilate transient flow data to calibrate a heterogeneous conductivity field. To update conductivity value at a point in a study domain, instead of assimilating all the measurements in the study domain, only limited measurement data in an area around the point are used for the conductivity updating in the localized EnKF method. The localized EnKF is proposed to solve the problems of the filter divergence usually existing in a data assimilation method without localization. The developed method is applied, in a synthetical two dimensional case, to calibrate a heterogeneous conductivity field by assimilating transient hydraulic head data. The simulations by the data assimilation with and without localized EnKF are compared. The study results indicate that the hydraulic conductivity field can be updated efficiently by the localized EnKF, while it cannot be by the EnKF. The covariance inflation and localization are found to solve the problem of the filter divergence efficiently. In comparison with the EnKF method without localization, the localized EnKF method needs smaller ensemble size to achieve stabilized results. The simulation results by the localized EnKF method are much more sensitive to conductivity correlation length than to the localization radius. The developed localized EnKF method provides an approach to improve EnKF method in conductivity calibration.  相似文献   

4.
Groundwater modelling calls for an effective and robust data integrating method to fill the gap between the model and observation data. The ensemble Kalman filter (EnKF), a real‐time data assimilation method, has been increasingly applied in multiple disciplines such as petroleum engineering and hydrogeology. In this approach, a groundwater model is updated sequentially with measured data such as hydraulic head and concentration. As an alternative to the EnKF, the ensemble smoother (ES) has been proposed for updating groundwater models using all the data together, with much less computational cost. To further improve the performance of the ES, an iterative ES has been proposed for continuously updating the model by assimilating measurements together. In this work, we compare the performance of the EnKF, the ES, and the iterative ES using a synthetic example in groundwater modelling. Hydraulic head data modelled on the basis of the reference conductivity field are used to inversely estimate conductivities at unsampled locations. Results are evaluated in terms of the characterization of conductivity and groundwater flow predictions. It is concluded that (a) the iterative ES works better than the standard ES because of its continuous updating and (b) the iterative ES could achieve results comparable with those of the EnKF, with less computational cost. These findings show that the iterative ES should be paid much more attention for data assimilation in groundwater modelling.  相似文献   

5.
  相似文献   

6.
With growing importance of water resources in the world, remediations of anthropogenic contaminations due to reactive solute transport become even more important. A good understanding of reactive rate parameters such as kinetic parameters is the key to accurately predicting reactive solute transport processes and designing corresponding remediation schemes. For modeling reactive solute transport, it is very difficult to estimate chemical reaction rate parameters due to complex processes of chemical reactions and limited available data. To find a method to get the reactive rate parameters for the reactive urea hydrolysis transport modeling and obtain more accurate prediction for the chemical concentrations, we developed a data assimilation method based on an ensemble Kalman filter (EnKF) method to calibrate reactive rate parameters for modeling urea hydrolysis transport in a synthetic one-dimensional column at laboratory scale and to update modeling prediction. We applied a constrained EnKF method to pose constraints to the updated reactive rate parameters and the predicted solute concentrations based on their physical meanings after the data assimilation calibration. From the study results we concluded that we could efficiently improve the chemical reactive rate parameters with the data assimilation method via the EnKF, and at the same time we could improve solute concentration prediction. The more data we assimilated, the more accurate the reactive rate parameters and concentration prediction. The filter divergence problem was also solved in this study.  相似文献   

7.
Gradient based UCODE_2005 and data assimilation based on the Ensemble Kalman Filter(EnKF) are two different inverse methods. A synthetic two-dimensional flow case with four no-flow boundaries is used to compare the UCODE_2005 with the Ensemble Kalman Filter(EnKF) for their efficiency to inversely calculate and calibrate a hydraulic conductivity field based on hydraulic head data. A zonal, random heterogeneous conductivity field is calibrated by assimilating the time series of heads observed in monitoring wells. The study results indicate that the two inverse methods, UCODE_2005 and EnKF, could be used to calibrate the hydraulic conductivity field to a certain degree. More available observations and information about the conductivity field, more accurate inverse results will be obtained for the UCODE_2005. On the other hand, for a realistic zonal heterogeneous hydraulic conductivity field, EnKF can only efficiently determine the hydraulic conductivity field at the first several assimilated time steps. The results obtained by the UCODE_2005 look better than those by the EnKF. This is possibly due to the fact that the UCODE_2005 uses observed head data at every time step, while EnKF can only use observed heads at first several steps due to the filter divergence problem.  相似文献   

8.
Catchment scale hydrological models are critical decision support tools for water resources management and environment remediation. However, the reliability of hydrological models is inevitably affected by limited measurements and imperfect models. Data assimilation techniques combine complementary information from measurements and models to enhance the model reliability and reduce predictive uncertainties. As a sequential data assimilation technique, the ensemble Kalman filter (EnKF) has been extensively studied in the earth sciences for assimilating in-situ measurements and remote sensing data. Although the EnKF has been demonstrated in land surface data assimilations, there are no systematic studies to investigate its performance in distributed modeling with high dimensional states and parameters. In this paper, we present an assessment on the EnKF with state augmentation for combined state-parameter estimation on the basis of a physical-based hydrological model, Soil and Water Assessment Tool (SWAT). Through synthetic simulation experiments, the capability of the EnKF is demonstrated by assimilating the runoff and other measurements, and its sensitivities are analyzed with respect to the error specification, the initial realization and the ensemble size. It is found that the EnKF provides an efficient approach for obtaining a set of acceptable model parameters and satisfactory runoff, soil water content and evapotranspiration estimations. The EnKF performance could be improved after augmenting with other complementary data, such as soil water content and evapotranspiration from remote sensing retrieval. Sensitivity studies demonstrate the importance of consistent error specification and the potential with small ensemble size in the data assimilation system.  相似文献   

9.
This paper, based on a real world case study (Limmat aquifer, Switzerland), compares inverse groundwater flow models calibrated with specified numbers of monitoring head locations. These models are updated in real time with the ensemble Kalman filter (EnKF) and the prediction improvement is assessed in relation to the amount of monitoring locations used for calibration and updating. The prediction errors of the models calibrated in transient state are smaller if the amount of monitoring locations used for the calibration is larger. For highly dynamic groundwater flow systems a transient calibration is recommended as a model calibrated in steady state can lead to worse results than a noncalibrated model with a well-chosen uniform conductivity. The model predictions can be improved further with the assimilation of new measurement data from on-line sensors with the EnKF. Within all the studied models the reduction of 1-day hydraulic head prediction error (in terms of mean absolute error [MAE]) with EnKF lies between 31% (assimilation of head data from 5 locations) and 72% (assimilation of head data from 85 locations). The largest prediction improvements are expected for models that were calibrated with only a limited amount of historical information. It is worthwhile to update the model even with few monitoring locations as it seems that the error reduction with EnKF decreases exponentially with the amount of monitoring locations used. These results prove the feasibility of data assimilation with EnKF also for a real world case and show that improved predictions of groundwater levels can be obtained.  相似文献   

10.
This paper compares two Monte Carlo sequential data assimilation methods based on the Kalman filter, for estimating the effect of measurements on simulations of state error variance made by a one-dimensional hydrodynamic model. The first method used an ensemble Kalman filter (EnKF) to update state estimates, which were then used as initial conditions for further simulations. The second method used an ensemble transform Kalman filter (ETKF) to quickly estimate the effect of measurement error covariance on forecast error covariance without the need to re-run the simulation model. The ETKF gave an unbiased estimate of EnKF analysed error variance, although differences in the treatment of measurement errors meant the results were not identical. Estimates of forecast error variance could also be made, but their accuracy deteriorated as the time from measurements increased due in part to model non-linearity and the decreasing signal variance. The motivation behind the study was to assess the ability of the ETKF to target possible measurements, as part of an adaptive sampling framework, before they are assimilated by an EnKF-based forecasting model on the River Crouch, Essex, UK. The ETKF was found to be a useful tool for quickly estimating the error covariance expected after assimilating measurements into the hydrodynamic model. It, thus, provided a means of quantifying the ‘usefulness’ (in terms of error variance) of possible sampling schemes.  相似文献   

11.
富营养化模型是进行湖泊水环境质量预测和管理的重要工具,然而模型客观存在的误差一直是应用者关心的重要问题.数据同化作为连接观测数据与数值模型的重要方法,可以有效提高模型的准确性.集合卡尔曼滤波(En KF)是众多数据同化算法中应用最为广泛的一种,可进行非线性系统的数据同化,并能有效降低数据同化的计算量.本研究以太湖作为具体实例,选择Delft3D-BLOOM作为富营养化模型,在数值实验确定En KF集合数为100、观测误差方差为1%、模拟误差方差为10%的基础上分别进行模型状态变量同化以及状态变量与关键参数同步同化.结果显示,仅同化状态变量时,模型预测精度有所增加;同时同化状态变量和关键参数时,可显著提升模型在湖泊水环境质量预测中的精度.该研究为应用集合卡尔曼滤波以提高复杂的湖库富营养化模型模拟精度提供了有效的方法.  相似文献   

12.
A series of numerical experiments for data assimilation with the Ensemble Kalman Filter (EnKF) in a shallow water model are reported. Temperature profiles measured at a North Sea location, 55°30ˊ North and 0°55ˊ East (referred to as the CS station of the NERC North Sea project), are assimilated in 1-D simulations. Comparison of simulations without assimilation to model results obtained when assimilating data with the EnKF allows us to assess the filter performance in reproducing features of the observations not accounted for by the model. The quality of the model error sampling is tested as well as the validity of the Gaussian hypothesis underlying the analysis scheme of the EnKF. The influence of the model error parameters and the frequency of the data assimilation are investigated and discussed. From these experiments, a set of optimal parameters for the model error sampling are deduced and used to test the behavior of the EnKF when propagating surface information into the water column.  相似文献   

13.
Model parameters are a source of uncertainty that can easily cause systematic deviation and significantly affect the accuracy of soil moisture generation in assimilation systems. This study addresses the issue of retrieving model parameters related to soil moisture via the simultaneous estimation of states and parameters based on the Common Land Model (CoLM). The state-parameter estimation algorithms AEnKF (Augmented Ensemble Kalman Filter), DEnKF (Dual Ensemble Kalman Filter) and SODA (Simultaneous optimization and data assimilation) are entirely implemented within an EnKF framework to investigate how the three algorithms can correct model parameters and improve the accuracy of soil moisture estimation. The analysis is illustrated by assimilating the surface soil moisture levels from varying observation intervals using data from Mongolian plateau sites. Furthermore, a radiation transfer model is introduced as an observation operator to analyze the influence of brightness temperature assimilation on states and parameters that are estimated at different microwave signal frequencies. Three cases were analyzed for both soil moisture and brightness temperature assimilation, focusing on the progressive incorporation of parameter uncertainty, forcing data uncertainty and model uncertainty. It has been demonstrated that EnKF is outperformed by all other methods, as it consistently maintains a bias. State-parameter estimation algorithms can provide a more accurate estimation of soil moisture than EnKF. AEnKF is the most robust method, with the lowest RMSE values for retrieving states and parameters dealing only with parameter uncertainty, but it possesses disadvantages related to increasing sources of uncertainty and decreasing numbers of observations. SODA performs well under the complex situations in which DEnKF shows slight disadvantages in terms of statistical indicators; however, the former consumes far more memory and time than the latter.  相似文献   

14.
The Proper Orthogonal Decomposition(POD)-based ensemble four-dimensional variational(4DVar) assimilation method(POD4DEnVar) was proposed to combine the strengths of EnKF(i.e.,the ensemble Kalman filter) and 4DVar assimilation methods.Recently,a POD4DEnVar-based radar data assimilation scheme(PRAS) was built and its effectiveness was demonstrated.POD4 DEnVar is based on the assumption of a linear relationship between the model perturbations(MPs)and the observation perturbations(OPs);however,this assumption is likely to be destroyed by the highly non-linear forecast model or observation operator.To address this issue,using the Gauss-Newton iterative method,the nonlinear least squares enhanced POD4 DEnVar algorithm(referred to as NLS-4DVar) was proposed.Naturally,the PRAS was upgraded to form the NLS-4DVar-based radar data assimilation scheme(NRAS).To evaluate the performance of NRAS against PRAS,observing system simulation experiments(OSSEs) were conducted to assimilate reflectivity and radial velocity individually,with one,two,and three iterations.The results demonstrated that the NRAS outperformed PRAS in improving the initial condition and the forecasting of model variables and rainfall.The NRAS,with a smaller number of iterations,can yield a convergent result.In contrast to the situation when assimilating radial velocity,the advantages of NRAS over PRAS were more obvious when assimilating reflectivity.  相似文献   

15.
The coupled flow-mass transport inverse problem is formulated using the maximum likelihood estimation concept. An evolutionary computational algorithm, the genetic algorithm, is applied to search for a global or near-global solution. The resulting inverse model allows for flow and transport parameter estimation, based on inversion of spatial and temporal distributions of head and concentration measurements. Numerical experiments using a subset of the three-dimensional tracer tests conducted at the Columbus, Mississippi site are presented to test the model's ability to identify a wide range of parameters and parametrization schemes. The results indicate that the model can be applied to identify zoned parameters of hydraulic conductivity, geostatistical parameters of the hydraulic conductivity field, angle of hydraulic conductivity anisotropy, solute hydrodynamic dispersivity, and sorption parameters. The identification criterion, or objective function residual, is shown to decrease significantly as the complexity of the hydraulic conductivity parametrization is increased. Predictive modeling using the estimated parameters indicated that the geostatistical hydraulic conductivity distribution scheme produced good agreement between simulated and observed heads and concentrations. The genetic algorithm, while providing apparently robust solutions, is found to be considerably less efficient computationally than a quasi-Newton algorithm.  相似文献   

16.
Hydraulic tomography (HT) is a method for resolving the spatial distribution of hydraulic parameters to some extent, but many details important for solute transport usually remain unresolved. We present a methodology to improve solute transport predictions by combining data from HT with the breakthrough curve (BTC) of a single forced‐gradient tracer test. We estimated the three dimensional (3D) hydraulic‐conductivity field in an alluvial aquifer by inverting tomographic pumping tests performed at the Hydrogeological Research Site Lauswiesen close to Tübingen, Germany, using a regularized pilot‐point method. We compared the estimated parameter field to available profiles of hydraulic‐conductivity variations from direct‐push injection logging (DPIL), and validated the hydraulic‐conductivity field with hydraulic‐head measurements of tests not used in the inversion. After validation, spatially uniform parameters for dual‐domain transport were estimated by fitting tracer data collected during a forced‐gradient tracer test. The dual‐domain assumption was used to parameterize effects of the unresolved heterogeneity of the aquifer and deemed necessary to fit the shape of the BTC using reasonable parameter values. The estimated hydraulic‐conductivity field and transport parameters were subsequently used to successfully predict a second independent tracer test. Our work provides an efficient and practical approach to predict solute transport in heterogeneous aquifers without performing elaborate field tracer tests with a tomographic layout.  相似文献   

17.
Root zone soil water content impacts plant water availability, land energy and water balances. Because of unknown hydrological model error, observation errors and the statistical characteristics of the errors, the widely used Kalman filter (KF) and its extensions are challenged to retrieve the root zone soil water content using the surface soil water content. If the soil hydraulic parameters are poorly estimated, the KF and its extensions fail to accurately estimate the root zone soil water. The H‐infinity filter (HF) represents a robust version of the KF. The HF is widely used in data assimilation and is superior to the KF, especially when the performance of the model is not well understood. The objective of this study is to study the impact of uncertain soil hydraulic parameters, initial soil moisture content and observation period on the ability of HF assimilation to predict in situ soil water content. In this article, we study seven cases. The results show that the soil hydraulic parameters hold a critical role in the course of assimilation. When the soil hydraulic parameters are poorly estimated, an accurate estimation of root soil water content cannot be retrieved by the HF assimilation approach. When the estimated soil hydraulic parameters are similar to actual values, the soil water content at various depths can be accurately retrieved by the HF assimilation. The HF assimilation is not very sensitive to the initial soil water content, and the impact of the initial soil water content on the assimilation scheme can be eliminated after about 5–7 days. The observation interval is important for soil water profile distribution retrieval with the HF, and the shorter the observation interval, the shorter the time required to achieve actual soil water content. However, the retrieval results are not very accurate at a depth of 100 cm. Also it is complex to determine the weighting coefficient and the error attenuation parameter in the HF assimilation. In this article, the trial‐and‐error method was used to determine the weighting coefficient and the error attenuation parameter. After the first establishment of limited range of the parameters, ‘the best parameter set’ was selected from the range of values. For the soil conditions investigated, the HF assimilation results are better than the open‐loop results. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
We explore the ocean circulation estimates obtained by assimilating observational products made available by the Global Ocean Data Assimilation Experiment (GODAE) and other sources in an incremental, four-dimensional variational data assimilation system for the Intra-Americas Sea. Estimates of the analysis error (formally, the inverse Hessian matrix) are computed during the assimilation procedure. Comparing the impact of differing sea surface height and sea surface temperature products on both the final analysis error and difference between the model state estimates, we find that assimilating GODAE and non-GODAE products yields differences between the model and observations that are comparable to the differences between the observation products themselves. While the resulting analysis error estimates depend on the configuration of the assimilation system, the basic spatial structures of the standard deviations of the ocean circulation estimates are fairly robust and reveal that the assimilation procedure is capable of reducing the circulation uncertainty when only surface data are assimilated.  相似文献   

19.
Data assimilation techniques have been proven as an effective tool to improve model forecasts by combining information about observed variables in many areas. This article examines the potential of assimilating surface soil moisture observations into a field‐scale hydrological model, the Root Zone Water Quality Model, to improve soil moisture estimation. The Ensemble Kalman Filter (EnKF), a popular data assimilation technique for nonlinear systems, was applied and compared with a simple direct insertion method. In situ soil moisture data at four different depths (5, 20, 40, and 60 cm) from two agricultural fields (AS1 and AS2) in northeastern Indiana were used for assimilation and validation purposes. Through daily update, the EnKF improved soil moisture estimation compared with the direct insertion method and model results without assimilation, having more distinct improvement at the 5 and 20 cm depths than for deeper layers (40 and 60 cm). Local vertical soil property heterogeneity in AS1 deteriorated soil moisture estimates with the EnKF. Removal of systematic bias in the forecast model was found to be critical for more successful soil moisture data assimilation studies. This study also demonstrates that a more frequent update generally contributes in enhancing the open loop simulation; however, large forecasting error can prevent more frequent update from providing better results. In addition, results indicate that various ensemble sizes make little difference in the assimilation results. An ensemble of 100 members produced results that were comparable with results obtained from larger ensembles. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

20.
Groundwater models are critical decision support tools for water resources management and environmental remediation. However, limitations in site characterization data and conceptual models can adversely affect the reliability of groundwater models. Therefore, there is a strong need for continuous model uncertainty reduction. Ensemble filters have recently emerged as promising high-dimensional data assimilation techniques. Two general categories of ensemble filters exist in the literature: perturbation-based and deterministic. Deterministic ensemble filters have been extensively studied for their better performance and robustness in assimilating oceanographic and atmospheric data. In hydrogeology, while a number of previous studies demonstrated the usefulness of the perturbation-based ensemble Kalman filter (EnKF) for joint parameter and state estimation, there have been few systematic studies investigating the performance of deterministic ensemble filters. This paper presents a comparative study of four commonly used deterministic ensemble filters for sequentially estimating the hydraulic conductivity parameter in low- and moderately high-dimensional groundwater models. The performance of the filters is assessed on the basis of twin experiments in which the true hydraulic conductivity field is assumed known. The test results indicate that the deterministic ensemble Kalman filter (DEnKF) is the most robust filter and achieves the best performance at relatively small ensemble sizes. Deterministic ensemble filters often make use of covariance inflation and localization to stabilize filter performance. Sensitivity studies demonstrate the effects of covariance inflation, localization, observation density, and conditioning on filter performance.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号