首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 625 毫秒
1.
Wind characteristics and aeolian transport were measured on a naturally evolving beach and dune and a nearby site where the beach is raked and sand‐trapping fences are deployed. The beaches were composed of moderately well sorted to very well sorted fine to medium sand. The backshore at the raked site was wider and the foredune was more densely vegetated and about 1 m higher than at the unraked site. Wind speeds were monitored using anemometers placed at 1 m elevation and sand transport was monitored using vertical traps during oblique onshore, alongshore and offshore winds occurring in March and April 2009. Inundation of the low backshore through isolated swash channels prevented formation of a continuously decreasing cross‐shore moisture gradient. The surface of the berm crest was dryer than the backshore, making the berm crest the greatest source of offshore losses during offshore winds. The lack of storm wrack on the raked beach reduced the potential for sediment accumulation seaward of the dune crest during onshore winds, and the higher dune crest reduced wind speeds and sediment transport from the dune to the backshore during offshore winds. Accretion at wrack seaward of the dune toe on the unraked beach resulted in a wider dune field and higher, narrower backshore. Although fresh wrack is an effective local trap for aeolian transport, wrack that becomes buried appears to have little effect as a barrier and can supply dry sand for subsequent transport. Aeolian transport rates were greater on the narrower but dryer backshore of the unraked site. Vegetation growth may be necessary to trap sand within zones of buried wrack in order to allow new incipient foredunes to evolve. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

2.
Studies of sediment transport on developed coasts provide perspective on how human adjustments alter natural processes. Deployment of sand‐trapping fences is a common adjustment that changes the characteristics of the dune ramp and its role in linking sediment transfers from the backshore to the foredune. Fence effects were evaluated in the field using anemometer arrays and vertical sediment traps placed across a beach and dune at Seaside Park, New Jersey, USA during onshore and longshore winds. The foredune is 18 m wide and 4.5 m above the backshore. The mean speed of onshore winds at 0.5 m elevation decreased by 17% from the berm crest to the upper ramp and 36% in the lee of a fence there. Sediment transport during mean wind speeds up to 8.0 m s?1 at 0.5 m elevation was < 0.06 kg m?1 h?1 on the berm crest and backshore where fetch distances were < 45 m and surface sediment was relatively coarse (0.74–0.85 mm) but increased to 5.63 kg m?1 h?1 on the upper ramp aided by the longer fetch distances (up to 82 m) and finer grain size of the source sediment there (0.52 mm). Sediment transport along the berm crest and backshore during longshore winds, where fetch distances were > 200 m, was up to 58.69 kg m?1 h?1, about three orders of magnitude greater than during the onshore winds. Fences can displace the toe of the ramp farther seaward than would occur under natural conditions. They can create a gentler slope and change the shape of the ramp to a more convex form. A fence on the ramp can cut off a portion of sediment supply to the upper slope. Decisions about fence placement thus should consider these morphologic changes in addition to the effects on dune volume. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
Concepts derived from previous studies of offshore winds on natural dunes are evaluated on a dune maintained for shore protection during three offshore wind events. The potential for offshore winds to form a lee‐side eddy on the backshore or transfer sediment from the dune and berm crest to the water are evaluated, as are differences in wind speed and sediment transport on the dune crest, berm crest and a pedestrian access gap. The dune is 18–20 m wide near the base and has a crest 4.5 m above backshore elevation. Two sand‐trapping fences facilitate accretion. Data were obtained from wind vanes on the crest and lee of the dune and anemometers and sand traps placed across the dune, on the beach berm crest and in the access gap. Mean wind direction above the dune crest varied from 11 to 3 deg from shore normal. No persistent recirculation eddy occurred on the 12 deg seaward slope. Wind speed on the berm crest was 85–89% of speed at the dune crest, but rates of sediment transport were 2.27 times greater during the strongest winds, indicating that a wide beach overcomes the transport limitation of a dune barrier. Limited transport on the seaward dune ramp indicates that losses to the water are mostly from the backshore, not the dune. The seaward slope gains sand from the landward slope and dune crest. Sand fences causing accretion on the dune ramp during onshore winds lower the seaward slope and reduce the likelihood of detached flows during offshore winds. Transport rates are higher in access gaps than on the dune crest despite lower wind speeds because of flatter slopes and absence of vegetation. Transport rates across dunes and through gaps can be reduced using vegetation and raised walkover structures. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

4.
Changes in wind speed and sediment transport are evaluated at a gap and adjacent crest of a 2 to 3 m high, 40 m wide foredune built by sand fences and vegetation plantings on a wide, nourished fine sand beach at Ocean City, New Jersey. Anemometer masts, cylindrical sand traps and erosion pins were placed on the beach and dune during two obliquely onshore wind events in February and March 2003. Results reveal that: (1) changes in the alongshore continuity of the beach and dune system can act as boundaries to aeolian transport when winds blow at an angle to the shoreline; (2) oblique winds blowing across poorly vegetated patches in the dune increase the potential for creating an irregular crest elevation; (3) transport rates and deflation rates can be greater within the foredune than on the beach, if the dune surface is poorly vegetated and the beach has not had time to dry following tidal inundation; (4) frozen ground does not prevent surface deflation; and (5) remnant sand fences and fresh storm wrack have great local but temporary effect on transport rates. Temporal and spatial differences due to sand fences and wrack, changes in sediment availability due to time‐dependent differences in surface moisture and frozen ground, combined with complex topography and patchy vegetation make it difficult to specify cause–effect relationships. Effects of individual roughness elements on the beach and dune on wind flow and sediment transport can be quantified at specific locations at the event scale, but extrapolation of each event to longer temporal and spatial scales remains qualitative. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

5.
This paper documents application of an established geostatistical methodology to detect significant changes in a foredune–transgressive dune complex where Parks Canada Agency (PCA) implemented a dynamic restoration program to remove invasive marram grasses (Ammophila spp.) and enhance dynamic dune habitat for an endangered species. Detailed topographic surveys of a 10 320 m2 site in the Wickaninnish Dunes in Pacific Rim National Park, British Columbia, Canada for the first year post‐treatment are compared to a pre‐restoration LiDAR baseline survey. The method incorporates inherent spatial structure in measured elevation datasets at the sub‐landscape scale and models statistically significant change surfaces within distinct, linked geomorphic units (beach, foredune, transgressive dune complex). Seasonal and annual responses within the complex are discussed and interpreted. All geomorphic units experienced positive sediment budgets following restoration treatment. The beach experienced the highest differential volumetric change (+1656 m3) and net sediment influx (+834 m3, 0 · 19 m3 m–2) mostly from supply to the supratidal beach and incipient dune. This sediment influx occurred independent of the restoration effort and was available as a buffer against wave erosion and as supply to the landward dunes. The foredune received +200 m3 (0 · 13 m3 m‐2) and its seaward profile returned to a similar pre‐restoration form following erosion at the crest from vegetation removal and scarping by high water events. Sediment bypassing and minimal change was evident at the mid‐stoss slope with appreciable extension of depositional lobes in the lee. The transgressive dune complex experienced high accretion following restoration activity (+201 m3) and over the year (+284 m3, 0 · 07 m3 m–2) mostly from depositional lobes from the foredune, precipitation ridge growth along the downwind boundary, and growth of existing lobes within the complex. Further integration of this methodology to detect significant geomorphic changes is recommended, particularly for applications where sampling densities are limited or logistically defined. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

6.
Near‐surface airflow over a morphologically simple, vegetated, 8 m high foredune with a small wave‐cut scarp was measured for onshore to oblique‐onshore conditions during a low‐moderate (5–6 m s‐1 ) wind event and a high velocity (11–18 m s‐1) sand‐transporting gale event. Flow across the foredune was characterized by significant flow compression and acceleration up and across the foredune during both events. During the gale, a pronounced jet (speed bulge) developed at the foredune crest, which increased in magnitude with increasing wind speed. The vertical (W) velocity component of the 3D flow field was positive (upwards) across the stoss slope under low wind conditions but negative (downwards) during gale wind conditions, with upslope acceleration. During the low velocity event, there was speed‐down within the vegetation canopy, as would be expected for a porous roughness cover. During the strong wind event there was speed‐up in the lower portion of the vegetation canopy, and this was found up the entire stoss slope. Sediment transport during the gale force event was substantial across the beach and foredune despite the moderate vegetation cover and minimum fetch. Aeolian suspension was evident in the lee of the dune crest. The observations presented herein show that strong storm winds are an effective mechanism for translating sediment landwards across a high vegetated foredune, contributing sediment to the stoss slope, crest and leeward slopes of the foredune and backing dunes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

7.
  相似文献   

8.
Sediment fences are often used to monitor hillslope erosion, but these can underestimate sediment yields due to overtopping of runoff and associated sediment. We modified four sediment fences to collect and measure the runoff and sediment that overtopped the fence in addition to the sediment deposited behind the fence. Specific objectives were to: (1) determine the catch efficiency of sediment fences measuring post-fire hillslope erosion; (2) assess particle sorting of sand, silt/clay, and organic matter from each hillslope through the sediment fence and subsequent runoff collection barrels; (3) evaluate how catch efficiency and particle size sorting relate to site and rainfall-runoff event characteristics; and (4) use runoff simulations to estimate sediment fence volumes for future post-fire monitoring. Catch efficiency ranged from 28 to 100% for events and 38 to 94% per site for the entire sampling season, indicating a relatively large underestimation of sediment yields by sediment fences. Most of the eroded sediment had similar proportions of sand and silt/clay as the hillslope soils, but the sediment behind the fence was significantly enriched in sand while the sediment that overtopped the fence was more strongly enriched in silt/clay. The sediment fences had capacities of 3 m3 for hillslopes of 0.19–0.43 ha, but simulations of runoff for 2- to 100-year storms indicate that the sediment fences would need a capacity of up to 240 m3 to store all of the runoff and associated sediment. More accurate measurements of sediment yields with sediment fences require either increasing the storage capacity of the sediment fence(s) to accommodate the expected volume of runoff and sediment, reducing the size of the contributing area, or directly measuring the runoff and sediment that overtop the fence. © 2020 John Wiley & Sons, Ltd.  相似文献   

9.
Wind flow and sand transport intensity were measured on the seaward slope of a vegetated foredune during a 16 h storm using an array of sonic anemometers and Wenglor laser particle counters. The foredune had a compound seaward slope with a wave‐cut scarp about 0.5 m high separating the upper vegetated portion from the lower dune ramp, which was bare of vegetation. Wind direction veered from obliquely offshore at the start of the event to obliquely onshore during the storm peak and finally to directly onshore during the final 2 h as wind speed dropped to below threshold. Sand transport was initially inhibited by a brief period of rain at the start of the event but as the surface dried and wind speed increased sand transport was initiated over the entire seaward slope. Transport intensity was quite variable both temporally and spatially on the upper slope as a result of fluctuating wind speed and direction, but overall magnitudes were similar over the whole length. Ten‐minute average transport intensity correlates strongly with mean wind speed measured at the dune crest, and there is also strong correlation between instantaneous wind speed and transport intensity measured at the same locations when the data are smoothed with a 10 s running mean. Transport on the beach for onshore winds is decoupled from that on the seaward slope above the small scarp when the wind angle is highly oblique, but for wind angles <45° from shore perpendicular some sand is transported onto the lower slope. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

10.
The purpose of this study was to quantify relationships between season, sediment availability, sediment transport pathways, and beach/foredune morphology at Greenwich Dunes, PEI. This was done for periods ranging from a few days to multiple decades using erosion pins, bedframe measurements, annual surveys, and digital photogrammetry using historical aerial photographs. The relative significance of seasonal/annual processes versus response of the foredune system to broader geomorphic controls (e.g. relative sea level rise, storms, etc.) was also assessed. The data show that there are clear seasonal differences in the patterns of sand supply from the beach to the foredune at Greenwich and that there are differences in sediment supply to the foredune between the east and west reaches of the study area, resulting in ongoing differences in foredune morphology. They also demonstrate that models that incorporate wind climate alone, or even models that include other factors like beach moisture, would not be able to predict the amount of sediment movement from the beach to the foredune in this environment unless there were some way to parameterize system morphology, especially the presence or absence of a dune ramp. Finally, the data suggest that the foredune can migrate landward while maintaining its form via transfers of sediment from the stoss slope, over the crest, and onto the lee slope. Although the rate of foredune development or recovery after disturbance changes over time due to morphological feedback, the overall decadal evolution of the foredune system at Greenwich is consistent with, and supports, the Davidson‐Arnott (2005) conceptual model of dune transgression under rising sea level. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

11.
Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

12.
Coastal dunes are dynamic features that are continuously evolving due to constructive (e.g., wind- and wave-driven sediment transport) and destructive (e.g., elevated total water levels during storm events) processes. However, the relative importance of these processes in determining dune evolution is often poorly understood. In this study, ten lidar datasets from 1997 to 2016 are used to determine the relative role of erosion and accretion processes driving foredune change on the coast of Cape Lookout National Seashore, North Carolina, USA. Beach and dune morphometrics reveal that dune toe locations have generally retreated since 1997, while dune crest heights accreted by 0.01–0.02 m/year. We develop three univariate metrics that represent (1) the potential for erosion, i.e., total water level impact hours per year, (2) accretion, i.e., dune building hours per year, and (3) the relative net effect of foredune accretion and erosion processes, i.e., constructive–destructive dune forcing (CDDF) ratio, and test the correlative power of these metrics in explaining changes in foredune morphology. The total water level impact hours per year metric explained as much as 66% and 67% of the variance in dune crest and toe elevations, respectively, across the nearly two decades of dune evolution. The greatest number of dune building hours per year and largest dunes within the study site co-occurred at locations exposed to the dominant cross-shore wind direction as a result of varying shoreline orientation. The CDDF ratio was positively correlated to changes in the dune toe elevation in approximately 70% of dunes within the study site, outperforming the impact and dune building hours per year metrics. Our results show that these three metrics can provide first-order estimates of dune morphometric change across multiple spatial and temporal scales, which may be particularly useful at sites where lidar acquisition is intermittent.  相似文献   

13.
Although extensive data exist on runoff erosion and rates for non‐sandy hillslopes, data for arid dune slopes are scarce, owing to the widespread perception that the high infiltrability of sand will reduce runoff. However, runoff is generated on sandy dunes in the Hallamish dune field, western Negev Desert, Israel (P ≈ 95 mm) due to the presence of a thin (usually 1–3 mm) microbiotic crust. The runoff in turn produces erosion. Sediment yield was measured on ten plots (140–1640 m2) on the north‐ and south‐facing slopes of longitudinal dunes. Two plots facing north and two facing south were subdivided into three subplots. The subplots represented the crest of the active dune devoid of crust, the extensively crusted footslope of the dune, and the midslope section characterized by a patchy crust. The remaining plots extended the full length of the dune slope. No runoff and consequently no water‐eroded sediments were obtained from the crest subplots devoid of crust. However, runoff and sediment were obtained from the mid‐ and footslope crusted subplots. Sediment yield from the footslope subplots was much higher than from the midslopes, despite the higher sediment concentration that characterized the midslope subplots. The mean annual sediment yield at the Hallamish dune field was 432 g per metre width and was associated with high average annual concentrations of 32 g l?1. The data indicate that owing to the presence of a thin microbiotic crust, runoff and water erosion may occur even within arid sandy dune fields. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

14.
The form, height and volume of coastal foredunes reflects the long‐term interaction of a suite of nearshore and aeolian processes that control the amount of sand delivered to the foredune from the beach versus the amount removed or carried inland. In this paper, the morphological evolution of more than six decades is used to inform the development of a simple computer model that simulates foredune growth. The suggestion by others that increased steepness of the seaward slope will retard sediment supply from the beach to the foredune due to development of a flow stagnation zone in front of the foredune, hence limiting foredune growth, was examined. Our long‐term data demonstrate that sediment can be transferred from the beach to the foredune, even with a steep foredune stoss slope, primarily because much of the sediment transfer takes place under oblique rather than onshore winds. During such conditions, the apparent aspect ratio of the dune to the oncoming flow is less steep and conditions are not as favourable for the formation of a stagnation zone. The model shows that the rate of growth in foredune height varies as a function of sediment input from the beach and erosion due to storm events, as expected, but it also demonstrates that the rate of growth in foredune height per unit volume increase will decrease over time, which gives the perception of an equilibrium height having been reached asymptotically. As the foredune grows in size, an increasing volume of sediment is needed to yield a unit increase in height, therefore the apparent growth rate appears to slow. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

15.
The behaviour of offshore‐directed winds over coastal dune and beach morphology was examined using a combination of modelling (3‐D computational fluid dynamics (CFD)) and field measurement. Both model simulations and field measurements showed reversal of offshore flows at the back beach and creation of an onshore sediment transport potential. The influence of flow reversals on the beach‐dune transport system and foredune growth patterns has previously received little attention. Detailed wind flow measurements were made using an extensive array of mast‐mounted, 3‐D ultrasonic anemometers (50 Hz), arranged parallel to the dominant incident wind direction. Large eddy simulation (LES) of the offshore wind flow over the dune was conducted using the open‐source CFD tool openFOAM. The computational domain included a terrain model obtained by airborne LiDAR and detailed ground DGPS measurements. The computational grid (~22 million cells) included localized mesh refinement near the complex foredune terrain to capture finer details of the dune morphology that might affect wind flows on the adjacent beach. Measured and simulated wind flow are presented and discussed. The CFD simulations offer new insights into the flow mechanics associated with offshore winds and how the terrain steering of wind flow impacts on the geomorphological behaviour of the dune system. Simulation of 3‐D wind flows over complex terrain such as dune systems, presents a valuable new tool for geomorphological research, as it enables new insights into the relationship between the wind field and the underlying topography. The results show that offshore and obliquely offshore winds result in flow reversal and onshore directed winds at distances of up to 20 m from the embryo dune toe. The potential geomorphological significance of the findings are discussed and simple calculations show that incoming offshore and obliquely offshore winds with mean velocities over 13 m s?1 and 7 m s?1, respectively, have the potential to create onshore‐directed winds at the back beach with mean velocities above 3.3 m s?1. These are above the threshold of movement for dry sand and support previous conclusions about the significance of offshore winds in dune and beach budget calculations. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
Although dunes fronted by sandy beaches constitute approximately 80 per cent of South Africa's coastline, few studies have addressed the formation and life cycle of coastal foredunes, the small, ephemeral shore‐parallel dune ridges typically less than 5 m high and 20 m wide, which form seaward of the storm line. This study used regular, detailed topographic surveys of embryo and foredunes at Tugela mouth, an aggrading stretch of shoreline on the subtropical east coast of South Africa, over a 32‐month period, to gain insight into the formation and motion of these highly mobile landforms over the short term. Average wind drift potential at Tugela mouth during the study period, at 2·35 m s?1, was an order of magnitude lower than that typical of most parts of the eastern South African coast. The dominant sand‐moving wind for the region was from the southwest to west‐southwest at 10·7 to 13·8 m s?1, with a secondary vector from north to north‐northeast at 10·8 to 13·8 m s?1. Signi?cant shoreline retreat, a result of the low sediment yield of the Tugela River during the study period, was one of the main results. This provided the context for redistribution of sand from the inland to the seaward side of the study area, a consequence of the dominant wind direction, and for frequent creation and destruction of short‐lived embryo dunes. Those foredunes which survived the whole study period tended to increase in height, but there was no consistent directional trend in foredune crest movement throughout the 32 months. The study results generally supported Psuty's model of foredune development, but could not con?rm his contention of landward retreat of dune forms under conditions of shoreline erosion. This may be due to the relatively short duration of the study, or possibly to low wind drift potential at the site. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

17.
The nature of wind flow over a small, 0.6 m high foredune scarp is investigated on the Sir Richard Peninsula, South Australia during a variety of incident wind directions and speeds. The study provides additional supporting evidence that the presence of the scarp and the dune exerts a strong influence on a landwards trending reduction in wind velocity and an increase in turbulence, with the greatest area of turbulence occurring near and at the foredune scarp base. For an incident oblique wind, an alongshore helicoidal flow is formed within a separation region along the scarp basal region. In this region, the coefficient of variation (CV) of wind speed is high and displays significant fluctuations. The flow at the scarp crest is compressed, streamlined and accelerated, turbulence is suppressed, and local jets may occur depending on the incident wind approach angle. Jets are more likely where the incident flow is perpendicular or nearly so. A flow separation region does not develop downwind of the scarp crest where the morphology of the foredune stoss slope downwind of the scarp is more convex (as in this case) rather than relatively flat, and possibly due to the presence of vegetation at the scarp crest. A tentative model of the flow regions developed across a backshore–scarp–foredune region during oblique incident flow is provided. © 2018 John Wiley & Sons, Ltd.  相似文献   

18.
Reynolds shear stress (RS = –u′ w′) and sand transport patterns over a vegetated foredune are explored using three‐dimensional velocity data from ultrasonic anemometers (at 0 · 2 and 1 · 2 m) and sand transport intensity from laser particle counters (at 0 · 014 m). A mid‐latitude cyclone on 3–4 May 2010 generated storm‐force winds (exceeding 20 m s–1) that shifted from offshore to obliquely alongshore. Quadrant analysis was used to characterize the spatial variation of RS quadrant components (Q1 through Q4) and their relative contributions were parameterized using the flow exuberance relation, EXFL = (Q1 + Q3)/(Q2 + Q4). The magnitudes of RS and sand transport varied somewhat independently over the dune as controlled by topographic forcing effects on flow dynamics. A ‘flow exuberance effect’ was evident such that Q2 (ejection‐like) and Q4 (sweep‐like) quadrants (that contribute positively to RS) dominated on the beach, dune toe, and lower stoss, whereas Q1 and Q3 (that contribute negatively to RS) dominated near the crest. This exuberance effect was not expressed, however, in sand transport patterns. Instead, Q1 and Q4, with above‐average streamwise velocity fluctuations (+u′), were most frequently associated with sand transport. Q4 activity corresponded with most sand transport at the beach, toe, and stoss locations (52, 60, 100%). At the crest, 25 to 86% of transport was associated with Q1 while Q4 corresponded with most of the remaining transport (13 to 59%). Thus, the relationship between sand transport and RS is not as straightforward as in traditional equations that relate flux to stress in increasing fashion. Generally, RS was poorly associated with sand transport partly because Q1 and Q4 contributions offset each other in RS calculations. Thus, large amounts of transport can occur with small RS. Turbulent kinetic energy or Reynolds normal stresses (u′2, w′2) may provide stronger associations with sand transport over dunes, although challenges exist on how to normalize and compare these quantities. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

19.
There is little information on the performance of vegetative filter strips (VFS) in filtering high‐concentration sediment from subcritical overland flow. Flume experiments on simulated grass strips were conducted using combinations of three slope gradients (3°, 9° and 15°), five 1‐m‐wide slope positions (from upslope to downslope), two flow rates (60 and 20 L min‐1 m‐1) and sediment concentrations of 100–300 kg m‐3 under simulated rainfall and non‐rainfall conditions. The results showed that sediment deposition efficiency increased with VFS width as a power function. Rainfall significantly reduced sediment deposited within VFS. Higher sediment concentration corresponded to a larger sediment deposition load but reduced deposition efficiency. Flow rate had a negative effect on deposition efficiency but no effect on deposition load. Sediments were more easily deposited at the upper slope position than downslope, and the upper slope position had a higher percentage of coarse sediments. The deposited sediment had significantly greater median diameters (D50) than the inflow sediment. A greater proportion of coarse sediments larger than 25 µm in diameter were deposited, and particles smaller than 1 µm and of 10–25 µm had a better deposition performance than particles of 1–10 µm. Rainfall reduced the deposited sediment D50 at a slope gradient of 3° and had no significant influence on it at 9° or 15°. A higher sediment concentration led to a smaller D50 of the deposited sediment. Rainfall had no significant effect on overland flow velocity. Both the deposited sediment load and D50 decreased with increasing flow velocity, and flow velocity was the most sensitive factor impacting sediment deposition. The results from this study should be useful to control sediment flowing into rivers in areas with serious soil erosion. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

20.
Evidence from a field study on wind flow and sediment transport across a beach–dune system under onshore and offshore conditions (including oblique approach angles) indicates that sediment transport response on the back‐beach and stoss slope of the foredune can be exceedingly complex. The upper‐air flow – measured by a sonic anemometer at the top of a 3·5 m tower located on the dune crest – is similar to regional wind records obtained from a nearby meteorological station, but quite different from the near‐surface flow field measured locally across the beach–dune profile by sonic anemometers positioned 20 cm above the sand surface. Flow–form interaction at macro and micro scales leads to strong modulation of the near‐surface wind vectors, including wind speed reductions (due to surface roughness drag and adverse pressure effects induced by the dune) and wind speed increases (due to flow compression toward the top of the dune) as well as pronounced topographic steering during oblique wind approach angles. A conceptual model is proposed, building on the ideas of Sweet and Kocurek (Sedimentology 37 : 1023–1038, 1990), Walker and Nickling (Earth Surface Processes and Landforms 28 : 111–1124, 2002), and Lynch et al. (Earth Surface Processes and Landforms 33 : 991–1005, 2008, Geomorphology 105 : 139–146, 2010), which shows how near‐surface wind vectors are altered for four regional wind conditions: (a) onshore, detached; (b) onshore‐oblique, attached and deflected; (c) offshore, detached; and (d) offshore‐oblique, attached and deflected. High‐frequency measurements of sediment transport intensity during these different events demonstrate that predictions of sediment flux using standard equations driven by regional wind statistics would by unreliable and misleading. It is recommended that field studies routinely implement experimental designs that treat the near‐surface wind field as comprising true vector quantities (with speed and direction) in order that a more robust linkage between the regional (upper air) wind field and the sediment transport response across the beach–dune profile be established. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号