首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
基于小波与遗传算法的特征提取与特征选择   总被引:5,自引:0,他引:5  
高维遥感数据的分类与识别与传统的多光谱遥感分类技术具有明显的区别。本文提出了一种基于遗传算法和小波/小波包分析相结合的特征提取方法用于高维遥感数据降维与分类。该方法综合了遗传算法的全局优化和小波/小波包分析的多尺度、多分辨率的特点。首先,通过离散的小波变换(DWT)或小波包变换(WP)将高光谱信号变换到特征域进行光谱分解。由于DWT变换是一种线性变换,不同尺度的DWT系数可作为线性光谱特征。然后,对这些线性光谱特征利用遗传算法结合训练样本计算类内/类间距离搜索最优分类子集,其具体染色体编码取可能的特征号,适应度函数基于样本平均Jeffries-Matusita距离计算。所用的分类器采用最大似然分类器。试验结果表明该方法与常规特征提取算法如主成分变换(PCA)、判别分析特征提取(DAFE)、决策边界特征提取(DBFE)相比,能提高分类精度约1.1%-6.5%。  相似文献   

2.
Accurate classification of heterogeneous land surfaces with homogeneous land cover classes is a challenging task as satellite images are characterized by a large number of features in the spectral and spatial domains. The identifying relevance of a feature or feature set is an important task for designing an effective classification scheme. Here, an ensemble of random forests (RF) classifiers is realized on the basis of relevance of features. Correlation‐based Feature Selection (CFS) was utilized to assess the relevance of a subset of features by studying the individual predictive ability of each feature along with the degree of redundancy between them. Predictability of RF was greatly improved by random selection of the relevant features in each of the splits. An investigation was carried out on different types of images from the Landsat Enhanced Thematic Mapper Plus (Landsat ETM+) and QuickBird sensors. It has been observed that the performance of the RF classifier was significantly improved while using the optimal set of relevant features compared with a few of the most advanced supervised classifiers such as maximum likelihood classifier (MLC), Navie Bayes, multi‐layer perception (MLP), support vector machine (SVM) and bagging.  相似文献   

3.
对比研究了平行六面体、最近邻分类法、最大似然法、神经网络等经典分类算法以及近年来新发展的支持向量机分类算法在基于分割对象的高分辨率遥感图像分类中的性能,详细分析了不同内积核函数对于支持向量机分类的影响。对两个试验区进行试验的结果表明,支持向量机分类算法分类精度得到明显改善,同时分类结果受参数、样本选择等影响较小,稳定性好。  相似文献   

4.
5.
6.
This paper discusses a statistical and band transformation based approach to select bands for hyperspectral image analysis. Hyperspectral images contain large number of spectral bands with redundant information about the spectral classes in the image scene. It is necessary to reduce the high dimensionality of the data for the processing of hyperspectral data. We report a feature selection technique that removes correlated spectral bands using band decorrelation technique and obtains maximum variance image bands based on factor analysis. Factor analysis method of band selection technique is also validated against existing methods of band selection. The study is carried out for the agriculturally rich area of Musiri region of South India that has varied landcover types. Evaluation of the band selection procedure is done using signature separability measures such as Euclidean distance, Divergence, Transformed divergence and Jeffries Matusita distance. Results indicated that selected bands exhibited maximum separability and also occurred predominantly at wavelength 700 nm, 850, 1000 nm, 1200 nm, 1648 nm and 2200 nm.  相似文献   

7.
In this study, we used Landsat-8 imagery to test object- and pixel-based image classification approaches in an urban fringe area. For object-based classification, we applied four machine learning classifiers: decision tree (DT), naive Bayes (NB), random trees (RT), and support vector machine (SVM). For pixel-based classification, we utilized the maximum likelihood classifier (MLC). Specifically, we explored the influence of repeated sampling on classification results with different training sample sizes. We found that (1) except the overall accuracy of NB, those of the other four classifiers increased as the training sample size increased; (2) repeated sampling had a significant effect on classification accuracy, especially for the DT and NB classifiers; and (3) SVM achieved the best classification accuracy. In addition, the performance of the object-based classifiers was superior to that of the pixel-based classifier. The results of this study can provide guidance on the training sample size and classifier selection.  相似文献   

8.
In recent years, the significant increase in research on spatial information is observed. Classification or clustering is one of the well-known methods in spatial data analysis. Traditionally, classifiers are generally based on per-pixel approaches and are not utilizing the spatial information within pixel, called mixels which is an important source of information to image classification. There are two foremost reasons behind the existence of mixels: (a) coarse or low spatial resolution of sensor and (b) topographic effects that recorded on optical satellite imagery due to differential terrain illuminations over rugged areas such as Himalayas. In the present study, different classification algorithms have been implemented to drive the impact of topography on them. Among various available, three algorithms for the mapping of snow cover region over north Indian Himalayas (India) are compared: (a) maximum likelihood classification (MLC) as supervised classifier; (b) k-mean clustering as unsupervised classifier; and (c) linear spectral mixing model (LSMM) as soft classifier. These algorithms have been implemented on AWiFS multispectral data, and analysis was carried out. The classification accuracy is estimated by the error matrices, and LSMM achieved higher accuracy (84.5–88.5%) as compared to MLC (81–84%) and k-mean (74–81%). The results highlight that topographically derived classifiers achieved better accuracy in mapping as compared to simple classifiers. The study has many applications in snow hydrology, glaciology and climatology of mountain topography.  相似文献   

9.
The study investigates the performance of image classifiers for landscape-scale land cover mapping and the relevance of ancillary data for the classification success in order to assess and to quantify the importance of these components in image classification. Specifically tested are the performance of maximum likelihood classification (MLC), artificial neural networks (ANN) and discriminant analysis (DA) based on Landsat7 ETM+ spectral data in combination with topographic measures and NDVI. ANN produced high accuracies of more than 75% also with limited input information, while MLC and DA produced comparable results only by incorporating ancillary data into the classification process. The superiority of ANN classification was less pronounced on the level of the single land cover classes. The use of ancillary data generally increased classification accuracy and showed a similar potential for increasing classification accuracy than the selection of the classifier. Therefore, a stronger focus on the development of appropriate and optimised sets of input variables is suggested. Also the definition and selection of land cover classes has shown to be crucial and not to be simply adaptable from existing land cover class schemes. A stronger research focus towards discriminating land cover classes by their typical spectral, topographic or seasonal properties is therefore suggested to advance image classification.  相似文献   

10.
There is an urgent necessity to monitor changes in the natural surface features of earth. Compared to broadband multispectral data, hyperspectral data provides a better option with high spectral resolution. Classification of vegetation with the use of hyperspectral remote sensing generates a classical problem of high dimensional inputs. Complexity gets compounded as we move from airborne hyperspectral to Spaceborne technology. It is unclear how different classification algorithms will perform on a complex scene of tropical forests collected by spaceborne hyperspectral sensor. The present study was carried out to evaluate the performance of three different classifiers (Artificial Neural Network, Spectral Angle Mapper, Support Vector Machine) over highly diverse tropical forest vegetation utilizing hyperspectral (EO-1) data. Appropriate band selection was done by Stepwise Discriminant Analysis. The Stepwise Discriminant Analysis resulted in identifying 22 best bands to discriminate the eight identified tropical vegetation classes. Maximum numbers of bands came from SWIR region. ANN classifier gave highest OAA values of 81% with the help of 22 selected bands from SDA. The image classified with the help SVM showed OAA of 71%, whereas the SAM showed the lowest OAA of 66%. All the three classifiers were also tested to check their efficiency in classifying spectra coming from 165 processed bands. SVM showed highest OAA of 80%. Classified subset images coming from ANN (from 22 bands) and SVM (from 165 bands) are quite similar in showing the distribution of eight vegetation classes. Both the images appeared close to the actual distribution of vegetation seen in the study area. OAA levels obtained in this study by ANN and SVM classifiers identify the suitability of these classifiers for tropical vegetation discrimination.  相似文献   

11.
天宫一号高光谱数据尚未得到普遍应用,其数据的质量和应用潜力仍在进一步实践求证和挖掘.See5.0数据挖掘工具是一种能够找出训练样本中模式类隐含特征,并可以自动建立决策规则的分类算法,可避免人为建立分类规则的主观性.本文首先通过光谱曲线分析,选择地物光谱分离性最好的波段组合,然后利用See5.0工具生成规则集,再利用规则集对同一幅天宫一号高光谱数据在不同分类级别上进行分类,并利用相同的验证样本进行精度验证.经过光谱分析发现分类不同森林类型的最佳谱段中心波长分别为:655 nm、673 nm、802 nm、866 nm、984 nm,See5.0分类结果表明在同一树种不同生长期及不同亚种的分类级别上,分类精度在45%以下,表现出了一定局限性,但在树种分类级别上,天宫一号数据表现出了高光谱的优越性,分类精度皆在80%以上,植被类型分类级别,分类精度可达到90%以上.  相似文献   

12.
基于随机森林特征优选的冬小麦分类方法   总被引:1,自引:0,他引:1  
本文基于多时相Landsat 8 OLI数据,进行综合光谱、植被指数的特征提取与特征选择的方法研究。通过分析光谱与植被指数特征时序变化,提取最佳时相光谱,构建小麦提取特征;采用基于重要性与Pearson相关性的随机森林特征选择算法优选特征。结果表明:利用优选特征分类时,总体精度为89.78%,小麦分类精度为98.33%;与优选前特征的分类结果相比,精度分别提高了2.96%、2.55%;基于重要性与Pearson相关性的随机森林特征选择提高了分类精度和分类器工作效率。  相似文献   

13.
Saltcedar (Tamarix spp.) are a group of dense phreatophytic shrubs and trees that are invasive to riparian areas throughout the United States. This study determined the feasibility of using hyperspectral data and a support vector machine (SVM) classifier to discriminate saltcedar from other cover types in west Texas. Spectral measurements were collected with a ground-based hyperspectral spectroradiometer (spectral range 350–2500 nm) in December 2008 and April 2009. Spectral data consisting of 1698 spectral bands (400–1349, 1441–1789, 1991–2359 nm) were subjected to a support vector machine classification to differentiate saltcedar from other vegetative and non-vegetative classes. For both dates, a linear kernel model with a C value (error penalty) of 100 was found optimum for separating saltcedar from the other classes. It identified saltcedar with accuracies ranging from 95% to 100%. Findings support further exploration of hyperspectral remote sensing technology and SVM classifiers for differentiating saltcedar from other cover types.  相似文献   

14.
A fuzzy ARTMAP classifier is adopted for a classification experiment of CBERS-2 imagery. The fundamental theory and processing about the algorithm are first introduced, followed with a land-use classification experiment in Shihezi County on CBERS-2 high resolution imagery. Three classifiers are compared: maximum likelihood classifier (MLC), error back propagation (BP) classifier, and fuzzy ARTMAP classifier. The comparison shows comparably better results for the fuzzy ARTMAP classifier, with overall classification accuracy of 9.9% and 4.6% higher than that of MLC and BP. The results also prove that the fuzzy ARTMAP classifier has better discernment in identifying bare soil on CBERS-2 imagery.  相似文献   

15.
A fuzzy ARTMAP classifier is adopted for a classification experiment of CBERS-2 imagery. The fundamental theory and processing about the algorithm are first introduced, followed with a land-use classification experiment in Shihezi County on CBERS-2 high resolution imagery. Three classifiers are compared: maximum likelihood classifier (MLC), error back propagation (BP) classifier, and fuzzy ARTMAP classifier. The comparison shows comparably better results for the fuzzy ARTMAP classifier, with overall classification accuracy of 9.9% and 4.6% higher than that of MLC and BP. The results also prove that the fuzzy ARTMAP classifier has better discernment in identifying bare soil on CBERS-2 imagery.  相似文献   

16.
通过训练样本采样处理改善小宗作物遥感识别精度   总被引:1,自引:0,他引:1  
训练样本质量是决定农作物遥感识别精度的关键因素,虽然高空间分辨率卫星的发展有效地解决了农作物遥感识别过程中的混合像元问题,但是当区域内不同作物种植面积差异较大时,训练集中不同类别样本数量往往相差较大,这样的不均衡数据集影响分类器的训练,导致少数类别的识别精度不理想。为研究作物遥感识别过程中的不均衡样本问题,本文基于GF-2号卫星数据,首先挖掘了地物的光谱信息、纹理信息,用特征递归消除RFE (Recursive Feature Elimination)方法进行特征优选,然后从数据处理的角度采用了5种采样算法对不均衡训练集进行处理,最后使用采样后的均衡数据集训练分类器,对比数据采样前后决策树与Adaboost(Adaptive Boosting)两种分类器的识别结果,发现:(1)经过采样处理后两种分类算法明显提升了小宗作物的分类精度;(2)经过ADASYS (Adaptive synthetic sampling)采样处理后,分类器性能提升最多,决策树的Kappa系数提高了14.32%,Adaboost的Kappa系数提高了10.23%,达到最高值0.9336;(3)过采样的处理效果优于欠采样,过采样对分类器的性能提升更多。综上所述,选择合适的采样方法和分类方法是提高不均衡数据集遥感分类精度的有效途径。  相似文献   

17.
Currently, hyperspectral images have potential applications in many scientific areas due to the high spectral resolution. Extracting suitable and adequate bands/features from high dimensional data is a crucial task to classify such data. To overcome this issue, dimension reduction techniques have direct effects to improve the efficiency of classifiers on hyperspectral images. One common approach for decreasing the dimensionality is the feature/band selection by considering the optimum dimensionality of the hyperspectral imagery. In this paper, a new method was proposed to select optimal band for classification application, based on a metaheuristic Invasive Weed Optimization (IWO) algorithm. In this regard, the K-nearest neighbour (K-NN) technique was used as the classifier. Moreover, as a by-product of our band selection method, a new method was proposed to estimate an optimum dimension of the reduced hyperspectral images for better classification. Experimental results over three real-world hyperspectral datasets clearly showed that the proposed IWO-based band selection algorithm of this study led to the significant progress in selecting suitable bands for classification applications and estimation of optimum dimensionality of these datasets. In this regard, the overall accuracy (OA) of classification of the proposed IWO-based band selection algorithm was 92.02, 93.57, and 89.72 % for each dataset, respectively. Moreover, results reveal the superiority of the proposed IWO-based band selection algorithm against the other algorithms including GA, SA, ACO, and PSO for band selection purpose.  相似文献   

18.
赵理君  唐娉 《遥感学报》2016,20(2):157-171
目前普遍采用的分类器通常都是针对单一或小量任务而设计的,在小数据量的处理中能取得比较满意的结果。但对于海量遥感数据的处理,其在处理时效和分类精度方面还有待研究。本文以遥感图像场景分类任务为例,着重对遥感数据分类问题中几种典型分类方法的适用性进行比较研究,包括K近邻(KNN)、随机森林(RF),支持向量机(SVM)和稀疏表达分类器(SRC)等。分别从参数敏感性,训练样本数据量,待分类样本数据量和样本特征维数对分类器性能的影响等几个方面进行比较分析。实验结果表明:(1)KNN,RF和L0-SRC方法相比RBF-SVM,Linear-SVM和L1-SRC,受参数影响的程度更弱;(2)待分类样本固定的情况下,随着训练样本数目的增加,SRC类型分类方法的分类性能最佳,SVM类型方法次之,然后是RF和KNN,在总体分类时间上呈现出L0-SRCL1-SRCRFRBF-SVM/Linear-SVMKNN/L0-SRC-Batch的趋势;(3)训练样本固定的情况下,所有分类方法的分类精度几乎都不受待分类样本数目变化的影响,RBF-SVM方法性能最佳,其次是L1-SRC,然后是Linear-SVM,最后是RF和L0-SRC/L0-SRC-Batch,在总体分类时间上,L1-SRC和L0-SRC相比其他分类方法最为耗时;(4)样本特征维数的变化不仅影响分类器的运行效率,同时也影响其分类精度,其中SRC和KNN分类器器无需较高的特征维数即可获得较好的分类结果,SVM对高维特征具有较强的包容性和学习能力,RF分类器对特征维数增加则表现得并不敏感,特征维数的增加并不能对其分类精度的提升带来更多的贡献。总的来说,在大数据量的遥感数据分类任务中,现有分类方法具有良好的适用性,但是对于分类器的选择应当基于各自的特点和优势,结合实际应用的特点进行权衡和选择,选择参数敏感性较小,分类总体时间消耗低但分类精度相对较高的分类方法。  相似文献   

19.
潘欣  张树清  李晓峰  那晓东  于欢 《遥感学报》2009,13(6):1163-1176
提出了一种基于粗集属性划分的遥感分类新方法, 构造了基于粗集的集成遥感分类器。该分类器利用粗集理论将输入的属性集合划分为多个约减, 利用这些约减构造多个训练子集。每个训练子集训练神经网分类器, 在决策时将多个单个分类器的结果进行投票选举。这种方法即减少了单个分类器的输入属性个数, 又避免了由于属性选取造成单一分类器在某些分类上的错误偏见。该分类器与神经网分类器方法, 以及属性选取与神经网结合方法进行了比较。结果表明RSEC无论在分类精度上, 还是在不同样本个数条件下的精度稳定程度上均有较好表现。  相似文献   

20.
用模糊ARTMAP算法对CBERS-2数据进行分类   总被引:3,自引:0,他引:3  
用模糊ARTMAP(fuzzy adaptive resonance theorymap)神经网络算法对CBERS-2数据进行了分类实践。首先介绍了模糊ARTMAP神经网络的算法原理和具体训练分类过程;然后用2004年9月新疆石河子地区的影像数据进行土地利用分类试验,并将分类结果与基于统计的最大似然法(MLC)、反向传播神经网络(BP)的分类结果作比较,总分类精度比MLC和BP算法分别提高9.9%和4.6%。结果表明,模糊ARTMAP对试验区CBERS-2影像上的裸地识别能力很强,对高分辨率的CBERS-2影像可获得很好的分类结果。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号