首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Magnetotelluric and gravity data have been collected within a ca. 170 km long traverse running from the Pacific coast of Nicaragua in the west to the Nicaraguan Highland in the east. This part of Nicaragua is characterized by sedimentary rocks of the Pacific Coastal Plain, separated from the Tertiary volcanic rocks of the Highland by the NW-SE-trending Nicaraguan Depression. 2-D interpretation of the magnetotelluric (MT) data, collected at 13 stations, indicates four regions of high electrical conductivity in addition to the conductive coastal region. Two of these are associated with conducting sediments and pyroclastics in the upper part of the crust. Two other conductive structures have been defined at depth around 20 km and the one best defined is located below the depression. From the distribution of seismic events, volcanic activity in the depression and the similarity in geophysical characteristics with areas such as the Rio Grande Rift, this conductor is interpreted as a melt layer or a complex of magma chambers. Models of the upper lithosphere, constrained by the MT model, vertical electrical sounding (VES) data, seismic data and densities, have been tested using gravity data. A model that passes this test shows a gradual thickening of the crust eastwards from the Pacific coast. An anomaly centred over the depression is interpreted to have its origin in a thinning of the crust. In this model the melt layer is situated on top of the bulge of the lower lithosphere. A change in the composition of the crust, from the Pacific Coastal Plain to the Highland, is indicated from the change in character of the MT response and from the density distribution in the gravity model. This may support the hypothesis that the Pacific region is an accreted terrane. MT and gravity data indicate a depth to a resistive and high-density basement in the depression of ca. 2 km. On the basis of this, the vertical setting in the depression is estimated to be of the order of 2.5 km.  相似文献   

2.
Collocated magnetotelluric (MT) and seismic profiling is emerging as a necessary combined approach for deep and near-surface imaging but the resulting experimental data are typically interpreted separately since no production programs exist for multidimensional joint inversion of MT and seismic data. We present a joint 2-D inversion approach for imaging collocated MT and seismic refraction data with cross-gradient structural constraints. We describe the main features of the algorithm and first apply it to synthetic data generated for a hypothetical complex geological model. For the synthetic data, we find that the scheme leads to models with remarkable structural resemblance and improved estimates of electrical resistivity and seismic velocity. We apply the scheme to near-surface field data to test the consistency of a previously suggested resistivity–velocity interrelationship and its potential use for subsurface lithofacies discrimination or structural classification. The MT-seismic relationship is found to be in excellent accord with that derived previously for DC resistivity and seismic data set at the test site. Our results suggest that joint MT-seismic cross-gradient imaging leads to improved characterization of heterogeneous geological targets at near-surface to mantle depths.  相似文献   

3.
Magnetotelluric data from the backarc of the Central Andes in NW Argentinawere re-examined by employing impedance tensor decomposition and 2-D inversion and modelling techniques. The data in the period range of 50–15 000 s were collected on a profile of 220 km length reaching from the Eastern Cordillera across the Santa Barbara System to the Andean foreland of the Argentinean Chaco.
After a dimensionality analysis, data from most sites were treated as regional 2-D. The exception was the eastern section of the profile, where the magnetotelluric transfer functions for periods ≤ 1000 s reflect a 3-D earth. Application of two tensor decomposition schemes yielded a regional strike direction of N–S, which is the azimuth of the Central Andean mountain chains. Several 2-D models were obtained by pseudo- and full 2-D Occam inversion schemes. Special emphasis was placed on the inversion of phase data to reduce the influence of static shifts in the apparent resistivity data. The smooth inversion models all show a good conductor at depth. A final model was then calculated using a finite element forward algorithm.
The most prominent feature of the resulting model is a conductor which rises from depths of 180 km below the Chaco region to 80 km beneath the Santa Barbara System and the Eastern Cordillera. Its interpretation as a rise of the electrical asthenosphere is supported by seismic attenuation studies. Magnetotelluric results, surface heat-flow distribution in the area, and the electrical properties of crustal and mantle rocks suggest that the upper mantle is predominantly ductile beneath the Eastern Cordillera and the western Santa Barbara System. This generally agrees with anelastic seismic attenuation models of the area and is useful in discriminating between models of Q quality factor distribution.  相似文献   

4.
Aquifer-bearing intermontane sedimentary basins of the Sierras Pampeanas in the northwest of Argentina are in general very deep and narrow and contain economically important deposits of Tertiary sediments. This paper presents the results of a study to characterize the sedimentary basin bounded to the west by Sierra de Famatina and to the east by Sierra de Velasco, where an electromagnetic sensing technique, the magnetotelluric (MT) method, was applied. 12 MT sites were deployed along a 30  km E–W transect. Some of the data collected were used to derive a 2-D resistivity model of the basin. The model shows a subsurface trough with a thick (approximately 8  km) sedimentary sequence above it. Anomalous behaviour of the E–W electric-field component ( E y ) was detected in the period range 1–100  s, where the amplitude of this component was below the instrumental noise level. The cause of this anomaly is not known, but it might be due to the presence of an embedded conducting body between 8 and 10  km, which would give rise to N–S current channelling.  相似文献   

5.
A 3-D density model was created for the Central Balkans area down to a depth of 670  km on the basis of seismic (both artificial sources and earthquakes) and gravity data. This model is based on density columns constructed for the main geological units of the study region. The densities for these columns were obtained using the density variation method. This method makes it possible to extrapolate the density distribution from the well-studied uppermost layers to the deeper levels of the Earth. The constructed 3-D density model was interpreted in relation to the available data on the heat flow and the seismicity of the region. The subdivision of the region by the Maritza fault into two parts—the southern part including the Rhodope massif and the northern part including the structures of Alpine activation of Srednogorie and the Balkanides—was confirmed. The upraised position of the 400  km boundary within the upper mantle, which was established from the density modelling, is assumed to be a sign of development of recent geodynamical processes over the Srednogorie block. From the viewpoint of seismicity prediction, a finding of mantle inhomogeneities orthogonal to the Maritza suture is of great importance.  相似文献   

6.
This paper presents the application of the electrical resistivity tomography (ERT) method to the investigation of the Tertiary maar structure of Baruth (Germany) known from previous gravimetric surveys. ERT was applied to support the optimum location for a palaeoclimatological drill hole.
  Special modifications of data acquisition, signal processing and inversion are introduced to adapt the method of ERT to the special requirements for the 3-D investigation of structures with horizontal extensions of 1  km or more. More than 5000 dipole–dipole combinations were recorded at three concentric circular electrode arrangements using stand-alone transient data acquisition systems (RefTek).
  We present a fast approximate imaging technique based on the simultaneous iterative reconstruction technique (SIRT). As the complete calculation of the inverse Frechét matrix is avoided, the algorithm is especially suitable for large data and model spaces, where complete inversion is beyond the limits of available computing hardware. The single-step method is applicable to arbitrary irregular electrode layouts. Synthetic tests show that the imaging procedure reconstructs the main features of the subsurface.
  A low-resistivity body could be interpreted as limnic sediments filling the interior of the Tertiary maar crater. Considering the horizontal resistivity gradient, estimates for the lateral and depth extents of the structure were made. An optimum position for a palaeoclimatological borehole was found, and was in good agreement with the gravimetric minimum.  相似文献   

7.
The rifting history of the Atlantic continental margin of Newfoundland is very complex and so far has been investigated at the crustal scale primarily with the use of 2-D seismic surveys. While informative, the results generated from these surveys cannot easily be interpreted in a regional sense due to their sparse sampling of the margin. A 3-D gravity inversion of the free air data over the Newfoundland margin allows us to generate a 3-D density anomaly model that can be compared with the seismic results and used to gain insight into regions lacking seismic coverage. Results of the gravity inversion show good correspondence with Moho depths from seismic results. A shallowing of the Moho to 12 km depth is resolved on the shelf at the northern edge of the Grand Banks, in a region poorly sampled by other methods. Comparisons between sediment thickness and crustal thickness show deviations from local isostatic compensation in locations which correlate with faults and rifting trends. Such insights must act as constraints for future palaeoreconstructions of North Atlantic rifting.  相似文献   

8.
The Narmada zone in central India is a zone of weakness that separates the region of Vindhyan (Meso-Neoproterozoic) deposition to the north from Gondwana (Permo-Carboniferous–lower Cretaceous) deposits to the south. The reinterpretation of analogue seismic refraction data, acquired during the early 1980s, using 2-D ray-tracing techniques reveals a basement (velocity 5.8–6.0 km s−1 ) topography suggesting that the Narmada zone, bounded by the Narmada North and Narmada South faults is a region of basement uplift. A layer of anomalously high velocity (6.5–6.7 km s−1 ) at depths between 1.5 and 9.0 km appears to be present in the entire region. Within the Narmada zone this layer occurs at shallower depths than outside the Narmada zone. At two places within the Narmada zone this layer is at a depth of about 1.5 km. This layer cannot be considered as the top of the lower crust because in this case it should have produced large positive gravity anomalies at the shallowest parts. Instead, these parts correspond to Bouguer gravity lows. Furthermore, lower crust at such shallow depths has not been reported from any other part of the Indian shield. Therefore, this layer is likely to represent the top of a high-velocity mafic body that has different thicknesses in different places.  相似文献   

9.
Summary Accurate determinations of depths and conductivities of electrical structures in shield regions are often difficult because of the inhomogeneity of the uppermost crust. A magnetotelluric (MT) station (BAT) in the Grenville Province of the Precambrian Shield in eastern Canada has been in operation since 1975 for time-dependency studies of electrical resistivity changes related to earthquakes. The MT response of the station displays low skew with small to moderate anisotropy. One-dimensional inversion of the apparent resistivity and phase reveals two well-defined conductors in the crust, one at 10 km and the second at the base of the crust. The latter has a resistivity less than 50 Ω m. These results are substantiated by three additional MT stations located up to 40 km distant.
Data from other new MT stations and from stations previously published in the literature are compared with two-dimensional computer model results and with the three-dimensional analogue scale model results of Dosso et al. While additional data for periods less than 100 s would be desirable the results from a number of the MT stations are not inconsistent with a widespread occurrence of a conducting zone at the base of the crust in the Grenville. The inversion analysis also indicates the existence of a conductor at some depth greater than 100 km with a resistivity less than 30 Ω m. This may coincide with a seismic low-velocity zone observed in the mantle under the Canadian Shield.  相似文献   

10.
In order to investigate the velocity structure, and hence shed light on the related tectonics, across the Narmada–Son lineament, traveltimes of wide-angle seismic data along the 240 km long Hirapur–Mandla profile in central India have been inverted. A blocky, laterally heterogeneous, three-layer velocity model down to a depth of 10 km has been derived. The first layer shows a maximum thickness of the upper Vindhyans (4.5 km s−1 ) of about 1.35 km and rests on top of normal crystalline basement, represented by the 5.9 km s−1 velocity layer. The anomalous feature of the study is the absence of normal granitic basement in the great Vindhyan Graben, where lower Vindhyan sediments (5.3 km s−1 ) were deposited during the Precambrian on high-velocity (6.3 km s−1 ) metamorphic rock. The block beneath the Narmada–Son lineament represents a horst feature in which high-velocity (6.5 km s−1 ) lower crustal material has risen to a depth of less than 2 km. South of the lineament, the Deccan Traps were deposited on normal basement during the upper Cretaceous period and attained a maximum thickness of about 800 m.  相似文献   

11.
A wide-angle seismic profile across the western peninsulas of SW Ireland was performed. This region corresponds to the northernmost Variscan thrust and fold deformation. The dense set of 13 shots and 109 stations along the 120  km long profile provides a detailed velocity model of the crust.
  The seismic velocity model, obtained by forward and inverse modelling, defines a five-layer crust. A sedimentary layer, 5–8  km thick, is underlain by an upper-crustal layer of variable thickness, with a base generally at a depth of 10–12  km. Two mid-crustal layers are defined, and a lower-crustal layer below 22  km. The Moho lies at a depth of 30–32  km. A low-velocity zone, which coincides with a well-defined gravity low, is observed in the central part of the region and is modelled as a Caledonian granite which intruded upper-crustal basement. The granite may have acted as a buffer to northward-directed Variscan thrusting. The Dingle–Dungarvan Line (DDL) marks a major change in sedimentary and crustal velocity and structure. It lies immediately to the north of the velocity and gravity low, and shows thickness and velocity differences in many of the underlying crustal layers and even in the Moho. This suggests a deep, pre-Variscan control of the structural development of this area. The model is compatible with thin-skinned tectonics, which terminated at the DDL and which incorporated thrusts involving the sedimentary and upper-crustal layers.  相似文献   

12.
We use teleseismic three-component digital data from the Trabzon, Turkey broadband seismic station TBZ to model the crustal structure by the receiver function method. The station is located at a structural transition from continental northeastern Anatolia to the oceanic Black Sea basin. Rocks in the region are of volcanic origin covered by young sediments. By forward modelling the radial receiver functions, we construct 1-D crustal shear velocity models that include a lower crustal low-velocity zone, indicating a partial melt mechanism which may be the source of surfacing magmatic rocks and regional volcanism. Within the top 5 km, velocities increase sharply from about 1.5 to 3.5 km s−1. Such near-surface low velocities are caused by sedimentation, extending from the Black Sea basin. Velocities at around 20 km depth have mantle-like values (about 4.25 km s−1 ), which easily correlate to magmatic rocks cropping out on the surface. At 25 km depth there is a thin low-velocity layer of about 4.0 km s−1. The average Moho velocity is about 4.6 km s−1, and its depth changes from 32 to 40 km. Arrivals on the tangential components indicate that the Moho discontinuity dips approximately southwards, in agreement with the crustal thickening to the south. We searched for the solution of receiver functions around the regional surface wave group velocity inversion results, which helped alleviate the multiple solution problem frequently encountered in receiver function modelling.
Station TBZ is a recently deployed broadband seismic station, and the aim of this study is to report on the analysis of new receiver function data. The analysis of new data in such a structurally complex region provides constraining starting models for future structural studies in the region.  相似文献   

13.
A new algorithm is presented for the integrated 2-D inversion of seismic traveltime and gravity data. The algorithm adopts the 'maximum likelihood' regularization scheme. We construct a 'probability density function' which includes three kinds of information: information derived from gravity measurements; information derived from the seismic traveltime inversion procedure applied to the model; and information on the physical correlation among the density and the velocity parameters. We assume a linear relation between density and velocity, which can be node-dependent; that is, we can choose different relationships for different parts of the velocity–density grid. In addition, our procedure allows us to consider a covariance matrix related to the error propagation in linking density to velocity. We use seismic data to estimate starting velocity values and the position of boundary nodes. Subsequently, the sequential integrated inversion (SII) optimizes the layer velocities and densities for our models. The procedure is applicable, as an additional step, to any type of seismic tomographic inversion.
We illustrate the method by comparing the velocity models recovered from a standard seismic traveltime inversion with those retrieved using our algorithm. The inversion of synthetic data calculated for a 2-D isotropic, laterally inhomogeneous model shows the stability and accuracy of this procedure, demonstrates the improvements to the recovery of true velocity anomalies, and proves that this technique can efficiently overcome some of the limitations of both gravity and seismic traveltime inversions, when they are used independently.
An interpretation of field data from the 1994 Vesuvius test experiment is also presented. At depths down to 4.5 km, the model retrieved after a SII shows a more detailed structure than the model obtained from an interpretation of seismic traveltime only, and yields additional information for a further study of the area.  相似文献   

14.
Basement depth in the Arabian plate beneath eastern Syria is found to be much deeper than previously supposed. Deep-seated faulting in the Euphrates fault system is also documented. Data from a detailed 300 km long reversed refraction profile, with offsets up to 54 km, are analysed and interpreted, yielding a velocity model for the upper 9 km of continental crust. The interpretation integrates the refraction data with seismic-reflection profiles, well logs and potential field data, such that the results are consistent with all available information. A model of sedimentary thicknesses and seismic velocities throughout the region is established. Basement depth on the north side of the Euphrates is interpreted to be around 6 km, whilst south of the Euphrates basement depth is at least 8.5 km. Consequently, the potentially hydrocarbon-rich pre-Mesozoic section is shown, in places, to be at least 7 km thick. The dramatic difference in basement depth on adjacent sides of the Euphrates graben system may suggest that the Euphrates system is a suture/shear zone, possibly inherited from Late Proterozoic accretion of the Arabian plate. Gravity modelling across the southeast Euphrates system tends to support this hypothesis. Incorporation of previous results allows us to establish the first-order trends in basement depth throughout Syria  相似文献   

15.
A 3-D P -velocity map of the crust and upper mantle beneath the southeastern part of India has been reconstructed through the inversion of teleseismic traveltimes. Salient geological features in the study region include the Archean Dharwar Craton and Eastern Ghat metamorphic belt (EGMB), and the Proterozoic Cuddapah and Godavari basins. The Krishna–Godavari basin, on the eastern coastal margin, evolved in response to the Indo–Antarctica breakup. A 24-station temporary network provided 1161 traveltimes, which were used to model 3-D P -velocity variation. The velocity model accounts of 80 per cent of the observed data variance. The velocity picture to a depth of 120 km shows two patterns: a high velocity beneath the interior domain (Dharwar craton and Cuddapah basin), and a lower velocity beneath the eastern margin region (EGMB and coastal basin). Across the array velocity variations of 7–10 per cent in the crust (0–40 km) and 3–5 per cent in the uppermost mantle (40–120 km) are observed. At deeper levels (120–210 km) the upper-mantle velocity differences are insignificant among different geological units. The presence of such a low velocity along the eastern margin suggests significantly thin lithosphere (<100 km) beneath it compared to a thick lithosphere (>200 km) beneath the eastern Dharwar craton. Such lithospheric thinning could be a consequence of Indo–Antarctica break-up.  相似文献   

16.
Widespread definition of a groundwater system in three dimensions is necessary for the management and maintenance of groundwater resources. A magnetotelluric (MT) survey can be an effective geophysical prospecting method for imaging regional geological structures by measuring both shallow and deep resistivity. To demonstrate the capability of an MT survey to characterize a groundwater system, the Kumamoto area of central Kyushu in southwestern Japan was selected as a case study site because of its rich groundwater resources. Three-dimensional (3D) MT resistivity structure to a depth of 5?km was modeled by 1D inversion analysis of raw MT data and 3D interpolation of the resultant resistivity column data by the optimization principle method. Consequently, both deep and shallow aquifers were detected. A high-resistivity zone appears at depths between 500 and 2,000?m between the Futagawa?CHinagu faults and the Usuki?CYatsushiro tectonic line, which supports the existence of an aquiclude under the aquifer. The most important characteristic inferred from the 3D resistivity model is that the deep groundwater system below a depth of 1,000?m has two main flow paths. One path is likely to be through porous rocks because the low resistivity zone is regarded as tuff with sand and gravel, and the other flow path is interpreted to be through fractured zones along the Hinagu faults. Hence, the path and direction of the groundwater flows are probably controlled by geologic structures and the configuration of the active faults. These findings support the effectiveness of the MT method for investigating groundwater systems.  相似文献   

17.
Summary. In the summer of 1984 an electrical survey using magnetometric off-shore electrical sounding (MOSES) was conducted at two sites in Middle Valley, part of the northern Juan de Fuca Ridge complex. MOSES has been designed to minimize the difficulties inherent in electrical surveys of the crust below the electrically conductive sea layer. Site 1, at 48°32N, 128°42W, is in the central part of the turbidite-filled basin. Using a two-layer model of conductive sediments overlying a fractured basalt basement, the sediment resistivity and thickness were found to be 0.82 ± 0.06 Ωm and 1800 ± 300 m, respectively. The basement resistivity, although not well constrained by the data is consistent with the results obtained at site 2.
Site 2, located at 48°10N, 128°50W, has a thinner sediment layer, which appears to vary with position. The sediment conductivity—thickness product is the parameter determined by the data. If the sediment resistivity were the same as at site 1, the sediment thickness would be 140 ± 30 m to the SE of site 2, and 240 ± 55 m to the NW. The fractured basalt basement has a resistivity of 8.5 ± 3.4 Ωm and is at least 1000 m thick.
Using temperature-corrected pore fluid resistivity, the calculated porosity is found to vary from 62 per cent at the top to 21 per cent at the base of the sediments and is 8 per cent in the basement. These values are in good agreement with estimates from seismic velocities for a thick turbidite sequence in a nearby sediment-filled basin and determined for layer 2A/B basalts in DSDP hole 504B, respectively.  相似文献   

18.
The Canary Islands swell: a coherence analysis of bathymetry and gravity   总被引：2，自引：0，他引：2  
The Canary Archipelago is an intraplate volcanic chain, located near the West African continental margin, emplaced on old oceanic lithosphere of Jurassic age, with an extended volcanic activity since Middle Miocene. The adjacent seafloor does not show the broad oceanic swell usually observed in hotspot-generated oceanic islands. However, the observation of a noticeable depth anomaly in the basement west of the Canaries might indicate that the swell is masked by a thick sedimentary cover and the influence of the Canarian volcanism. We use a spectral approach, based on coherence analysis, to determine the swell and its compensation mechanism. The coherence between gravity and topography indicates that the swell is caused by a subsurface load correlated with the surface volcanic load. The residual gravity/geoid anomaly indicates that the subsurface load extends 600 km SSW and 800 km N and NNE of the islands. We used computed depth anomalies from available deep seismic profiles to constrain the extent and amplitude of the basement uplift caused by a relatively low-density anomaly within the lithospheric mantle, and coherence analysis to constrain the elastic thickness of the lithosphere ( Te ) and the compensation depth of the swell. Depth anomalies and coherence are well simulated with Te =28–36 km, compensation depth of 40–65 km, and a negative density contrast within the lithosphere of ∼33 kg m−3. The density contrast corresponds to a temperature increment of ∼325°C, which we interpret to be partially maintained by a low-viscosity convective layer in the lowermost lithosphere, and which probably involves the shallower parts of the asthenosphere. This interpretation does not require a significant rejuvenation of the mechanical properties of the lithosphere.  相似文献   

19.
This study describes an examination of surface gravity changes caused by dislocations within a 3-D heterogeneous earth. This new theory is described using six independent dislocations: a vertical strike-slip, two vertical dip-slips perpendicular to each other, and three tensile openings on three perpendicular planes. A combination of the six independent dislocations is useful to compute coseismic gravity changes resulting from an arbitrary seismic source at an arbitrary position. Based on the 3-D lateral inhomogeneous P -wave velocity model, we deduce the 3-D density and S -wave velocity models using the relation of Karato. Finally, numerical computations are performed for a location south of Japan (30°N, 135°E). We calculate the coseismic gravity changes resulting from the six independent dislocations for source depths of 100, 300 and 637 km, respectively. Numerical results show that the maximum 3-D effect varies concomitantly with the dislocation type and the source depth. For seismic problems, the effect of elastic parameter  μ  is dominant.  相似文献   

20.
The migration of teleseismic receiver functions yields high-resolution images of the crustal structure of western Crete. Data were collected during two field campaigns in 1996 and 1997 by networks of six and 47 short-period three-component seismic stations, respectively. A total of 1288 seismograms from 97 teleseismic events were restituted to true ground displacement within a period range from 0.5 to 7 s. The application of a noise-adaptive deconvolution filter and a new polarization analysis technique helped to overcome problems with local coda and noise conditions. The computation and migration of receiver functions results in images of local crustal structures with unprecedented spatial resolution for this region. The crust under Crete consists of a continental top layer of 15–20 km thickness above a 20–30 km thick subducted fossil accretionary wedge with a characteristic en echelon fault sequence. The downgoing oceanic Moho lies at a depth of 40–60 km and shows a topography or undulation with an amplitude of several kilometres. As a consequence of slab depth and distribution of local seismicity, the Mediterranean Ridge is interpreted as the recent accretionary wedge.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号