首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 674 毫秒
1.
李农  李建芬  刘宇平 《海洋学报》2010,32(9):5954-5958
针对一类混沌系统,提出了一种系统的混沌反同步设计方案,基于该方案,设计一种自适应控制方法,实现了参数不确定系统的混沌反同步和未知参数的辨识.数值模拟结果表明了提出方法的有效性.  相似文献   

2.
分数阶混沌系统与整数阶混沌系统之间的同步   总被引:1,自引:0,他引:1  
周平  邝菲 《海洋学报》2010,32(10):6851-6858
基于追踪控制的思想,利用分数阶系统稳定性理论,实现了分数阶混沌系统与整数阶混沌系统之间的混沌同步,给出了补偿器和反馈控制器的选择方法. 以三维分数阶Chen系统和三维整数阶Lorenz混沌系统之间的混沌同步为例进行了数值仿真和电路仿真. 研究表明了该同步方法的有效性.  相似文献   

3.
研究Lorenz混沌系统的同步控制问题,提出1种在多输入的情况下实现混沌同步的变结构控制算法.利用该算法设计的变结构同步控制律使得同步误差系统的运动在切换面上成为渐近稳定的滑动模态,从而较快的实现了混沌同步.通过对 Lorenz 混沌系统的理论分析和数值仿真,说明了该变结构同步控制策略的实用性和有效性.  相似文献   

4.
利用滑模控制方法研究了一类分数阶参数不确定混沌系统的自适应同步控制问题,基于Lyapunov稳定性理论和分数阶微积分的相关理论,给出分数阶参数不确定系统取得滑模同步的充分性条件,并给出了严格的证明,研究表明,一定条件下分数阶不确定系统是滑模混沌同步的,仿真结果表明了方法的可行性。  相似文献   

5.
吕翎  邹家蕊  杨明  孟乐  郭丽  柴元 《海洋学报》2010,32(10):6864-6870
以Plankton时空混沌系统作为网络节点,通过非线性耦合构成富社团(rich-club,RC)网络,研究其时空混沌同步规律.首先给出了RC网络中连接节点之间的非线性耦合函数的一般性选取原则.进而基于Lyapunov稳定性定理,理论分析了实现网络同步的条件.最后,通过仿真模拟检验了网络的时空混沌同步效果.仿真研究表明,RC网络中各富节点之间以及这些富节点各自星形连接的子网络中的所有节点均实现了完全同步.  相似文献   

6.
吕翎  李钢  商锦玉  沈娜  张新  柳爽  朱佳博 《海洋学报》2010,32(9):5966-5971
本文进行了最近邻网络的时空混沌同步研究.以时空混沌系统作为网络的节点,基于Lyapunov稳定性定理,通过确定网络的最大Lyapunov指数,得到了实现网络完全同步的条件.采用Fisher-Kolmogorov时空混沌系统作为网络节点实例进行了仿真模拟,获得了理想的同步效果.进一步研究了有界噪声影响下网络的同步性能,结果显示它具有较强的抗干扰能力.  相似文献   

7.
付士慧  裴利军 《海洋学报》2010,32(9):5985-5989
Chua电路是一个非光滑系统.本文通过广义哈密顿系统和观测器方法,将具有非线性控制的Chua电路的混沌同步问题转化成研究具有非线性控制的光滑系统的零解稳定性;进而利用滑模控制对该光滑系统的零解稳定性进行了研究,从而使得Chua电路达到了混沌同步.最后,将上述方法应用到具体系统,数值结果也表明其正确性.  相似文献   

8.
刘迪  徐伟  郭培荣  倪菲 《海洋学报》2010,32(9):5934-5939
基于Lyapunov稳定性理论,设计了一个简单的标量自适应控制器分别使具有确定和不确定参数的三维(3D)二次自治混沌系统实现反同步.此外,从驱动和响应系统间的时序列动态估计出所有不确定参数. 数值仿真表明该方法的有效性和实用性.  相似文献   

9.
史正平 《海洋学报》2010,32(9):5940-5948
研究了一个新的简易混沌振荡电路系统的稳定性和混沌特性,从理论上推导了该混沌振荡电路系统的稳定和混沌的条件,并对该系统进行了精确反馈线性化控制.最后,通过电路仿真实验和硬件实验验证了理论分析的准确性.  相似文献   

10.
杨继 《海洋技术学报》2008,27(1):96-100
混沌理论在水文系统中的应用主要集中在水文时间序列的混沌性识别和水文混沌预测的模型研究上。重点探讨了水文系统混沌分析应用领域的研究进展,并分析认为,提取海浪混沌特征,探索海浪预报的一种新方法,很值得尝试并深入研究。  相似文献   

11.
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.  相似文献   

12.
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.  相似文献   

13.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

15.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.  相似文献   

16.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

17.
18.
19.
《海洋学报(英文版)》2014,(11):161-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号