共查询到20条相似文献，搜索用时 31 毫秒
1.
Zorin Turutanov V. V. Mordvinova V. M. Kozhevnikov T. B. Yanovskaya A. V. Treussov 《Tectonophysics》2003,371(1-4):153-173
The main chain of SW–NE-striking Cenozoic half-grabens of the Baikal rift zone (BRZ) follows the frontal parts of Early Paleozoic thrusts, which have northwestern and northern vergency. Most of the large rift half-grabens are bounded by normal faults at the northwestern and northern sides. We suggest that the rift basins were formed as a result of transformation of ancient thrusts into normal listric faults during Cenozoic extension.Seismic velocities in the uppermost mantle beneath the whole rift zone are less than those in the mantle beneath the platform. This suggests thinning of the lithosphere under the rift zone by asthenosphere upwarp. The geometry of this upwarp and the southeastward spread of its material control the crustal extension in the rift zone. This NW–SE extension cannot be blocked by SW–NE compression generated by pressure from the Indian lithospheric block against Central Asia.The geochemical and isotopic data from Late Cenozoic volcanics suggest that the hot material in the asthenospheric upwarp is probably provided by mantle plumes. To distinguish and locate these plumes, we use regional isostatic gravity anomalies, calculated under the assumption that topography is only partially compensated by Moho depth variations. Variations of the lithosphere–asthenosphere discontinuity depth play a significant role in isostatic compensation. We construct three-dimensional gravity models of the plume tails. The results of this analysis of the gravity field are in agreement with the seismic data: the group velocities of long-period Rayleigh waves are reduced in the areas where most of the recognized plumes are located, and azimuthal seismic anisotropy shows that these plumes influence the flow directions in the mantle above their tails.The Baikal rift formation, like the Kenya, Rio Grande, and Rhine continental rifts [Achauer, U., Granet, M., 1997. Complexity of continental rifts as revealed by seismic tomography and gravity modeling. In: Jacob, A.W.B., Delvaux, D., Khan, M.A. (Eds.), Lithosphere Structure, Evolution and Sedimentation in Continental Rifts. Proceedings of the IGCP 400 Meeting, Dublin, March 20–22, 1997. Institute of Advanced Studies, Dublin, pp. 161–171], is controlled by the three following factors: (i) mantle plumes, (ii) older (prerift) linear lithosphere structures favorably positioned relative to the plumes, and (iii) favorable orientation of the far-field forces. 相似文献
2.
Review of the tectonics of the Levant Rift system: the structural significance of oblique continental breakup 总被引：3，自引：0，他引：3
The Levant Rift system is an elongated series of structural basins that extends for more than 1000 km from the northern Red Sea to southern Anatolia. The system consists of three major segments, the Jordan Rift in the south, El Gharb–Kara-Su Rift in the north, and the Lebanese Fault splay in between. The rifted parts of this structural system are accompanied by intensively uplifted margins that mirror-image the basinal pattern, namely, the deeper the basin—the higher its margins, and vice versa. Uplifts also occur along the fault splay section. The Jordan Rift comprises axial basins that diminish in size from the south northwards, and are separated from each other by shallow threshold zones along the axis of the rift, where the margins are also subdued. The Lebanese Fault splay consists of five faults that emerge from the northern edge of the Jordan Rift and trend like a fan between the north and the northeast. One of these faults connects the Jordan and El Gharb–Kara-Su rifts. The Levant Rift and its uplifted margins started to develop in the middle-late Miocene, and most of the structural development occurred in the Plio-Pleistocene.The Levant Rift system is characterized by its oblique displacement, and evidence for both dip-slip and strike-slip displacement was measured on its faults. Earthquakes also indicate that same mixed pattern, some of them show strike-slip offset, and others normal. It is generally conceded that the amount of normal offset along the boundary faults of the Rift system reaches 8–10 km, but the lateral displacement is disputed, and offsets ranging from 11 to 107 km were suggested. Assessment of the available data led us to suggest that the sinistral offset along the Levant Rift system is approximately 10–20 km. The similarity between the vertical and the lateral displacements, the basin and threshold structural pattern of the Rift, model experiments in oblique rifting, as well as the significant tectonic resemblance to the Red Sea and the East African rifts, indicate that the Levant Rift is the product of continental breakup, and it is probably an emerging oceanic spreading center. 相似文献
3.
Harro Schmeling 《Tectonophysics》2010,480(1-4):33-47
Active or passive continental rifting is associated with thinning of the lithosphere, ascent of the asthenosphere, and decompressional melting. This melt may percolate within the partially molten source region, accumulate and be extracted. Two-dimensional numerical models of extension of the continental lithosphere–asthenosphere system are carried out using an Eulerian visco-plastic formulation. The equations of conservation of mass, momentum and energy are solved for a multi-component (crust–mantle) and two-phase (solid–melt) system. Temperature-, pressure-, and stress-dependent rheologies based on laboratory data for granite, pyroxenite and olivine are used for the upper and lower crust, and mantle, respectively. Rifting is modelled by externally prescribing a constant rate of widening with velocities between 2.5 and 40 mm/yr. A typical extension experiment is characterized by 3 phases: 1) distributed extension, with superimposed pinch and swell instability, 2) lithospheric necking, 3) continental break up, followed by oceanization. The timing of the transition from stages 1) to 2) depends on the presence and magnitude of a localized perturbation, and occurs typically after 100–150 km of total extension for the lithospheric system studied here. This necking phase is associated with a pronounced negative topography (“rift valley”) and a few 100 m of rift flanks. The dynamic part of this topography amounts to about 1 km positive topography. This means, if rifting stops (e.g. due to a drop of external forces), immediate additional subsidence by this amount is predicted. Solidification of ascended melt beneath rift flanks leads to basaltic enrichment and underplating beneath the flanks, often observed at volcanic margins. After continental break up, a second time-dependent upwelling event off the rift axis beneath the continental margins is found, producing further volcanics. Melting has almost no or only a small accelerating effect on the local extension value (β-value) for a constant external extension rate. Melting has an extremely strong effect on the upwelling velocity within asthenospheric wedge beneath the new rift. This upwelling velocity is only weakly dependent on the rifting velocity. The melt induced sublithospheric convection cell is characterized by downwelling flow beneath rift flanks. Melting increases the topography of the flanks by 100–200 m due to depletion buoyancy. Another effect of melting is a significant amplification of the central subsidence due to an increase in localized extension/subsidence. Modelled magma amounts are smaller than observed for East African Rift System. Increasing the mantle temperature, as would be the case for a large scale plume head, better fits the observed magma volumes. If extension stops before a new ocean is formed, melt remains present, and convection remains active for 50–100 Myr, and further subsidence is significant. 相似文献
4.
Continental rift evolution: From rift initiation to incipient break-up in the Main Ethiopian Rift, East Africa 总被引：2，自引：0，他引：2
The Main Ethiopian Rift is a key sector of the East African Rift System that connects the Afar depression, at Red Sea–Gulf of Aden junction, with the Turkana depression and Kenya Rift to the South. It is a magmatic rift that records all the different stages of rift evolution from rift initiation to break-up and incipient oceanic spreading: it is thus an ideal place to analyse the evolution of continental extension, the rupture of lithospheric plates and the dynamics by which distributed continental deformation is progressively focused at oceanic spreading centres.The first tectono-magmatic event related to the Tertiary rifting was the eruption of voluminous flood basalts that apparently occurred in a rather short time interval at around 30 Ma; strong plateau uplift, which resulted in the development of the Ethiopian and Somalian plateaus now surrounding the rift valley, has been suggested to have initiated contemporaneously or shortly after the extensive flood-basalt volcanism, although its exact timing remains controversial. Voluminous volcanism and uplift started prior to the main rifting phases, suggesting a mantle plume influence on the Tertiary deformation in East Africa. Different plume hypothesis have been suggested, with recent models indicating the existence of deep superplume originating at the core-mantle boundary beneath southern Africa, rising in a north–northeastward direction toward eastern Africa, and feeding multiple plume stems in the upper mantle. However, the existence of this whole-mantle feature and its possible connection with Tertiary rifting are highly debated.The main rifting phases started diachronously along the MER in the Mio-Pliocene; rift propagation was not a smooth process but rather a process with punctuated episodes of extension and relative quiescence. Rift location was most probably controlled by the reactivation of a lithospheric-scale pre-Cambrian weakness; the orientation of this weakness (roughly NE–SW) and the Late Pliocene (post 3.2 Ma)-recent extensional stress field generated by relative motion between Nubia and Somalia plates (roughly ESE–WNW) suggest that oblique rifting conditions have controlled rift evolution. However, it is still unclear if these kinematical boundary conditions have remained steady since the initial stages of rifting or the kinematics has changed during the Late Pliocene or at the Pliocene–Pleistocene boundary.Analysis of geological–geophysical data suggests that continental rifting in the MER evolved in two different phases. An early (Mio-Pliocene) continental rifting stage was characterised by displacement along large boundary faults, subsidence of rift depression with local development of deep (up to 5 km) asymmetric basins and diffuse magmatic activity. In this initial phase, magmatism encompassed the whole rift, with volcanic activity affecting the rift depression, the major boundary faults and limited portions of the rift shoulders (off-axis volcanism). Progressive extension led to the second (Pleistocene) rifting stage, characterised by a riftward narrowing of the volcano-tectonic activity. In this phase, the main boundary faults were deactivated and extensional deformation was accommodated by dense swarms of faults (Wonji segments) in the thinned rift depression. The progressive thinning of the continental lithosphere under constant, prolonged oblique rifting conditions controlled this migration of deformation, possibly in tandem with the weakening related to magmatic processes and/or a change in rift kinematics. Owing to the oblique rifting conditions, the fault swarms obliquely cut the rift floor and were characterised by a typical right-stepping arrangement. Ascending magmas were focused by the Wonji segments, with eruption of magmas at surface preferentially occurring along the oblique faults. As soon as the volcano-tectonic activity was localised within Wonji segments, a strong feedback between deformation and magmatism developed: the thinned lithosphere was strongly modified by the extensive magma intrusion and extension was facilitated and accommodated by a combination of magmatic intrusion, dyking and faulting. In these conditions, focused melt intrusion allows the rupture of the thick continental lithosphere and the magmatic segments act as incipient slow-spreading mid-ocean spreading centres sandwiched by continental lithosphere.Overall the above-described evolution of the MER (at least in its northernmost sector) documents a transition from fault-dominated rift morphology in the early stages of extension toward magma-assisted rifting during the final stages of continental break-up. A strong increase in coupling between deformation and magmatism with extension is documented, with magma intrusion and dyking playing a larger role than faulting in strain accommodation as rifting progresses to seafloor spreading. 相似文献
5.
本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。 相似文献
6.
自中生代末期以来,东北地区形成了以松辽地堑为主体,联合下辽河裂谷、伊通-依兰裂谷、抚顺-密山裂谷以及邻近断陷盆地的大陆裂谷系,并向南北两端延伸,在亚洲东部构成一条大的裂谷带。这个大陆裂谷系的形成和发展是由中央向两侧展开的,与板块俯冲、弧后扩张密切相关。 相似文献
7.
《Gondwana Research》2014,25(3-4):886-901
The Late Mesoproterozoic (1085–1040 Ma) Ngaanyatjarra Rift, previously referred to as the Giles Event, is the dominant component of the Warakurna Large Igneous Province (LIP) that affected much of central and western Australia. This rift is well preserved and provides excellent examples of rift structure at a variety of crustal levels and times in the rift's evolution. Geological knowledge is integrated with geophysical interpretations and models to understand the crustal structure and evolution of this rift. Two phases are identified: an early rift stage (1085–1074 Ma) that is characterised by voluminous magmatism within the upper crust and relatively little tectonic deformation; and a late rift stage that is characterised by tectonic deformation, synchronous with the deposition of a thick pile of volcanic and sedimentary rocks (1074–1040 Ma). Compared to modern rift examples, this rift is unusual in that the crust was thickened by ~ 15 km and overall extension was very limited. However, its structure and evolution are very similar to the near-contemporaneous Midcontinent Rift, which shows the addition of a similar quantity of magmatic material as well as crustal thickening and limited extension. For these Mesoproterozoic rifts, we suggest that magmatism was the dominant process, and that the extension observed was a response to magmatism-induced crustal thickening and the gravitational collapse of the crustal column. Other Proterozoic rifts show similar characteristics (e.g. Transvaal Rift), whereas most Phanerozoic rifts are dissimilar, showing instead a dominance of extension, with magmatism largely a result of this extension. This change in the style of rifting from the Precambrian to the Phanerozoic may relate to the influence of a typically cooler and stronger lithosphere, which has caused stronger strain localisation and a greater role for extension as the controlling factor in rift evolution. 相似文献
8.
9.
Nd, Pb and Sr Isotopic Compositions of East African Carbonatites: Evidence for Mantle Mixing and Plume Inhomogeneity 总被引：14，自引：8，他引：14
New Pb isotopic data are presented for 10 young Mesozoic toCenozoic (0–116 Ma) carbonatites from a 1400 km long segmentof the East African Rift. Patterns observed in Pb vs Pb, Srvs Pb and Nd vs Pb isotope diagrams define unusual, nearly linear,trends that are interpreted as mixing between two componentsthat are broadly similar to the two mantle end-member components,HIMU and EM1, which were first recognized from ocean-islandbasalts. The two plutons with isotope signatures closest toHIMU and EM1 crop out within 140 km of each other. From thesedata, EM1 and HIMU are now known to occur in both continentaland oceanic settings that are associated with plumes or rifts.Moreover, these isotopic signatures tend to occur in regionswhere seismic tomography indicates prominent low-velocity zonesin the lower mantle. For these reasons, we favour a model forthe origin of the East African Rift carbonatites that involvesmelting and mixing of HIMU and EM1 components contained withinan isotopically heterogeneous mantle plume. We consider theHIMU and EM1 sources to be stored within the deep (lower 1000km) mantle, possibly the core–mantle boundary. The rolethat continental lithosphere plays in carbonatite generationis probably one of concentrating volatiles at the upper levelsof an ascending mantle plume. KEY WORDS: carbonatites; isotopes; rifts; plumes; FOZO 相似文献
10.
我国若干裂谷构造特征及其成矿作用 总被引：5，自引：0，他引：5
从基底构造、深大断裂、岩相古地理、岩浆活动、古地磁特征和裂谷型层控矿床比较等６个方面论证泰岭裂谷的存在，以古地磁成果为主导，探讨了秦岭裂谷的发生发展演化，到加里东末期裂谷曾锁闭，海西印支期再复合，从而有秦岭裂谷型层控铅锌矿床的形成，直到 印支末期裂谷两侧板块才碰撞对接在一起，文章最后论述了裂谷构造与成矿关系，我国若干裂谷构造特征与世界大陆裂谷的比较。 相似文献
11.
S. G. Skolotnev A. A. Peyve N. N. Turko M. E. Bylinskaya L. A. Golovina 《Geotectonics》2009,43(5):358-378
New data are obtained on the structure, evolution, and origin of zones of nontransform offsets of adjacent segments in the
Mid-Atlantic Ridge (MAR), which, in contrast to transform fracture zones, so far are studied insufficiently. The effects of
deep mantle plumes developing off the crest of the MAR on the processes occurring in the spreading zone are revealed. These
results are obtained from the geological investigation of the crest of the MAR between 19.8 ° and 21° S, where bottom sampling,
bathymetric survey, and magnetic measurements have been carried out previously. Two segments of the rift valley displaced
by 10 km relative to each other along a nontransform offset are revealed. A volcanic center of a spreading cell, which has
been active over the last 2 Ma, is located in the northern part of the southern segment and distinguished by a decreased depth
of the rift valley and increased thickness of the crust. Magnesian, slightly evolved basalts of the N-MORB type are detected
in this center, whereas evolved and high-Fe basalts are found beyond it. The variation in the composition of the basalts indicates
that the volcanic center is related to the upwelling of the asthenospheric mantle, which spread along and across the spreading
ridge. In the lithosphere, the melt migrated off the volcanic center along the rift valley. In the northern segment, a vigorous
volcanic center arose 2.5 Ma ago near its southern end; at present, the volcanic activity has ceased. As a result of the volcanic
activity, an oval rise composed of enriched T-MORB-type basalts was formed at the western flank of the crest zone. The isotopic
signatures show that the primary melts are derivatives of the chemically heterogeneous mantle. The mixing of material of the
depleted mantle with the mantle material pertaining either to the Saint Helena or the Tristan da Cunha plumes is suggested;
the mixture of all three sources cannot be ruled out. The conclusion is drawn that the mantle material of the Saint Helena
plume was supplied to the melting zone beneath the axial rift near the oval rise along a linear permeable zone in the mantle
extending at an azimuth of 225° SW. The blocks of mantle material that got to the convecting mantle from the Tristan da Cunha
plume at the stage of supercontinent breakup were involved in melting as well. The nontransform offset between the two segments
arose on the place of a previously existing transform fracture zone about 5 Ma ago. The nontransform offset developed in the
regime of oblique spreading at the progressive propagation of the southern segment to the north. The zone of nontransform
offset is characterized by recent volcanic activity. Over the last 2 Ma, spreading of the studied MAR segment was asymmetric,
faster in the western direction. The rates of westward and eastward half-spreading in the northern segment are estimated at
1.88 and 1.60 cm/yr, respectively. 相似文献
12.
《Journal of African Earth Sciences》2005,41(1-2):103-117
Over 35,000 onshore and offshore gravity stations have been compiled in order to test isostatic models against geologic structures over a part of the Afro–Arabian shield. The area of Ethiopia covers an important part of this system because it contains the major section of the ≈5000 km Afro–Arabian rift and includes the transition between the Arabo-Nubian-Shield (ANS) and the Mozambique Belt (MB).Isostatic residual anomalies have been calculated using both Airy and Vening-Meinesz (flexural rigidity D = 1022 Nm) models. The isostatic residual anomalies outline the major Precambrian belts, the Cenozoic rifts and associated major structures. Positive residual anomalies associated with the main Ethiopian Rift (MER) and Kenyan rift systems could be the expressions of an axial intrusive body and swarms of local faults and fractures. The residual anomalies indicate relative stability in the MER and increased tectonic activity in the areas of the Red Sea, Gulf of Aden and Afar. Near-zero isostatic residuals flank the MER and Kenya rifts and are found within the Danakil Alps and some plateau regions.The small mean isostatic residual anomaly (about 8 mGal) and the isostatic analysis show a slight positive bias indicating under compensation. The undercompensation may imply that there are upper crustal features that are not compensated regionally (probably supported by the rigidity of the lithosphere) and isostatic disequilibrium in the region. Therefore, the high topography of Ethiopia and East African plateau is partly compensated by thicker crust (broad negative isostatic regional anomaly) and partly by dynamic forces.The results of the qualitative interpretation form the basis of continuing three-dimensional gravity modelling and quantitative analysis that also integrates data from eastern Sudan. 相似文献
13.
This study aims at showing how far pre-existing crustal weaknesses left behind by Proterozoic mobile belts, that pass around cratonic Archean shields (Tanzania Craton to the southeast and Congo Craton to the northwest), control the geometry of the Albertine Rift. Focus is laid on the development of the Lake Albert and Lake Edward/George sub-segments and between them the greatly uplifted Rwenzori Mountains, a horst block located within the rift and whose highest peak rises to >5000 m above mean sea level. In particular we study how the southward propagating Lake Albert sub-segment to the north interacts with the northward propagating Lake Edward/George sub-segment south of it, and how this interaction produces the structures and geometry observed in this section of the western branch of the East African Rift, especially within and around the Rwenzori horst. We simulate behaviour of the upper crust by conducting sandbox analogue experiments in which pre-cut rubber strips of varying overstep/overlap connected to a basal sheet and oriented oblique and/or orthogonal to the extension vector, are placed below the sand-pack. The points of connection present velocity discontinuities to localise deformation, while the rubber strips represent ductile domain affected by older mobile belts. From fault geometry of developing rift segments in plan view and section cuts, we study kinematics resulting from a given set of boundary conditions, and results are compared with the natural scenario. Three different basal model-configurations are used to simulate two parallel rifts that propagate towards each other and interact. Wider overstep (model SbR3) produces an oblique transfer zone with deep grabens (max. 7.0 km) in the adjoining segments. Smaller overlap (model SbR4) ends in offset rift segments without oblique transfer faults to join the two, and produces moderately deep grabens (max. 4.6 km). When overlap doubles the overstep (model SbR5), rifts propagate sub-orthogonal to the extension direction and form shallow valleys (max. 2.9 km). Relative ratios of overlap/overstep between rift segments dictate the kind of transition zone that develops and whether or not a block (like the Rwenzoris) is captured and rotates; hence determining the end-member geometry. Rotation direction is controlled by pre-existing fabrics. Fault orientation, fault kinematics, and block rotation (once in play) reinforce each other; and depending on the local kinematics, different parts of a captured block may rotate with variable velocities but in the same general direction. Mechanical strength anisotropy of pre-structured crust only initially centres fault nucleation and propagation parallel to the grain of weakness of the basement, but at later stages of a protracted period of crustal extension, such boundaries are locally defied. 相似文献
14.
To better understand how active deformation localizes within a continental plate in response to extensional and transtensional tectonics, a combined analysis of high-quality gravity (Bouguer anomaly) and seismicity data is presented consisting of about 35000 earthquakes recorded in the Baikal Rift Zone. This approach allows imaging of deformation patterns from the surface down to the Moho. A comparison is made with heat flow variations in order to assess the importance of lithospheric rheology in the style of extensional deformation. Three different rift sectors can be identified. The southwestern rift sector is characterized by strong gravity and topography contrasts marked by two major crustal faults and diffuse seismicity. Heat flow shows locally elevated values, correlated with recent volcanism and negative seismic P-velocity anomalies. Based on earthquake fault plane solutions and on previous stress field inversions, it is proposed that strain decoupling may occur in this area in response to wrench-compressional stress regime imposed by the India–Asia collision. The central sector is characterized by two major seismic belts; the southernmost one corresponds to a single, steeply dipping fault accommodating oblique extension; in the centre of lake Baikal, a second seismic belt is associated with several dip-slip faults and subcrustal thinning at the rift axis in response to orthogonal extension. The northern rift sector is characterized by a wide, low Bouguer anomaly which corresponds to a broad, high topographic dome and seismic belts and swarms. This topography can be explained by lithospheric buoyancy forces possibly linked to anomalous upper mantle. At a more detailed scale, no clear correlation appears between the surficial fault pattern and the gravity signal. As in other continental rifts, it appears that the lithospheric rheology influences extensional basins morphology. However, in the Baikal rift, the inherited structural fabric combined with stress field variations results in oblique rifting tectonics which seem to control the geometry of southern and northeastern rift basins. 相似文献
15.
Lower crustal intrusions beneath the southern Baikal Rift Zone: Evidence from full-waveform modelling of wide-angle seismic data 总被引：1，自引：0，他引：1
The Cenozoic Baikal Rift Zone (BRZ) is situated in south-central Siberia in the suture between the Precambrian Siberian Platform and the Amurian plate. This more than 2000-km long rift zone is composed of several individual basement depressions and half-grabens with the deep Lake Baikal at its centre. The BEST (Baikal Explosion Seismic Transect) project acquired a 360-km long, deep seismic, refraction/wide-angle reflection profile in 2002 across southern Lake Baikal. The data from this project is used for identification of large-scale crustal structures and modelling of the seismic velocities of the crust and uppermost mantle. Previous interpretation and velocity modelling of P-wave arrivals in the BEST data has revealed a multi layered crust with smooth variation in Moho depth between the Siberian Platform (41 km) and the Sayan-Baikal fold belt (46 km). The lower crust exhibits normal seismic velocities around the rift structure, except for beneath the rift axis where a distinct 50–80-km wide high-velocity anomaly (7.4–7.6 ± 0.2 km/s) is observed. Reverberant or “ringing” reflections with strong amplitude and low frequency originate from this zone, whereas the lower crust is non-reflective outside the rift zone. Synthetic full-waveform reflectivity modelling of the high-velocity anomaly suggests the presence of a layered sequence with a typical layer thickness of 300–500 m coinciding with the velocity anomaly. The P-wave velocity of the individual layers is modelled to range between 7.4 km/s and 7.9 km/s. We interpret this feature as resulting from mafic to ultra-mafic intrusions in the form of sills. Petrological interpretation of the velocity values suggests that the intrusions are sorted by fractional crystallization into plagioclase-rich low-velocity layers and pyroxene- and olivine-rich high-velocity layers. The mafic intrusions were probably intruded into the ductile lower crust during the main rift phase in the Late Pliocene. As such, the intrusive material has thickened the lower crust during rifting, which may explain the lack of Moho uplift across southern BRZ. 相似文献
16.
V. Yu. Zabrodin 《Russian Journal of Pacific Geology》2017,11(3):155-162
The northeastern extremity of the East-Asian Rift Belt is designated as the Priokhotsky Rift, comprising the broadly north–south Torom (750 × 100 km) and Nizhneamursky (450 × 100 km) open faults formed by a system of northeast striking grabens associated with the closure of the Tan-Lu shear system and north–south striking grabens formed in a setting of oblique extension. Infilling of the grabens corresponding to the rift stage proper is the Eocene?Miocene coal-bearing molasse; the fields of the Miocene basalts are also related to it. The grabens of the rift belt are overlain by the Pliocene–Neopleistocene associations of rift basins in the forming plate cover of the Alpine platform. 相似文献
17.
Qiongdongnan Basin is a Cenozoic rift basin located on the northern passive continental margin of the South China Sea. Due to a lack of geologic observations, its evolution was not clear in the past. However, recently acquired 2-D seismic reflection data provide an opportunity to investigate its tectonic evolution. It shows that the Qiongdongnan Basin comprises a main rift zone which is 50–100 km wide and more than 400 km long. The main rift zone is arcuate in map view and its orientation changes from ENE–WSW in the west to nearly E–W in the east. It can be divided into three major segments. The generally linear fault trace shown by many border faults in map view implies that the eastern and middle segments were controlled by faults reactivated from NE to ENE trending and nearly E–W trending pre-existing fabrics, respectively. The western segment was controlled by a left-lateral strike-slip fault. The fault patterns shown by the central and eastern segments indicate that the extension direction for the opening of the rift basin was dominantly NW–SE. A semi-quantitative analysis of the fault cut-offs identifies three stages of rifting evolution: (1) 40.4–33.9 Ma, sparsely distributed NE-trending faults formed mainly in the western and the central part of the study area; (2) 33.9–28.4 Ma, the main rift zone formed and the area influenced by faulting was extended into the eastern part of the study area and (3) 28.4–20.4 Ma, the subsidence area was further enlarged but mainly extended into the flanking area of the main rift zone. In addition, Estimates of extensional strain along NW–SE-trending seismic profiles, which cross the main rift zone, vary between 15 and 39 km, which are generally comparable to the sinistral displacement on the Red River Fault Zone offshore, implying that this fault zone, in terms of sinistral motion, terminated at a location near the southern end of the Yinggehai Basin. Finally, these observations let us to favour a hybrid model for the opening of the South China Sea and probably the Qiongdongnan Basin. 相似文献
18.
FURMAN TANYA; KALETA KELLY M.; BRYCE JULIA G.; HANAN BARRY B. 《Journal of Petrology》2006,47(6):1221-1244
The East African Rift System is important to understanding plume-initiatedrifting as manifest in the geochemistry of mafic lavas eruptedalong the rift throughout its evolution. We present new datafrom high-MgO Tertiary lavas from Turkana, northern Kenya, toinvestigate regional melt source components, to identify thedepths and degrees of melting, and to characterize spatiallyand temporally the chemical structure of the underlying mantle.The Turkana area is a region of high lithospheric extensionthat sits between two topographic uplifts thought to be surfaceexpressions of one or more upwelling mantle plumes. Thinningof local crust is believed to be accompanied by widespread removalof the mantle lithosphere, causing the asthenosphere to be inclose contact with the overlying crust. New geochemical dataon basanites, picrites and basalts (MgO >7 wt %) tightlyconstrain the primary melt source regions of Tertiary volcanism.Initial isotopic signatures (143Nd/144Nd = 0·51267–0·51283,87Sr/86Sr = 0·7031–0·7036) and trace elementabundances (Ce/Pb 30, La/Nb = 0·6–0·8 andBa/Nb = 3–10) in these lavas are consistent with derivationfrom sub-lithospheric sources. Basalts and picrites eruptedbetween 23 and 20 Ma have Sr–Nd–Pb–He isotopiccharacteristics indicative of high-µ influence, recordhigh depths and degrees of partial melting, and are associatedwith rift propagation to the north and south. Accordingly, theselavas sample a source region that is geochemically distinctfrom that reflected both in Oligocene Ethiopian flood basaltsand in the modern Afar region. The geochemical data supportnumerical and theoretical models as well as tomographic resultsproviding for a complex thermal structure in the mantle beneathEast Africa and are interpreted to reflect isotopically distinctplume heads beneath Tanzania and Afar that are derived fromthe chemically heterogeneous South African superplume. KEY WORDS: East African Rift System; mantle plumes; HIMU; geochemistry; Afar 相似文献
19.
S. F. Skobelev M. Hanon J. Klerkx N. N. Govorova N. V. Lukina V. G. Kazmin 《Tectonophysics》2004,380(3-4):131-137
The active fault database and Map of active faults in Africa, in scale of 1:5,000,000, were compiled according to the ILP Project II-2 “World Map of Major Active Faults”. The data were collected in the Royal Museum of Central Africa, Tervuren, Belgium, and in the Geological Institute, Moscow, where the final edition was carried out. Active faults of Africa form three groups. The first group is represented by thrusts and reverse faults associated with compressed folds in the northwest Africa. They belong to the western part of the Alpine–Central Asian collision belt. The faults disturb only the Earth's crust and some of them do not penetrate deeper than the sedimentary cover. The second group comprises the faults of the Great African rift system. The faults form the known Western and Eastern branches, which are rifts with abnormal mantle below. The deep-seated mantle “hot” anomaly probably relates to the eastern volcanic branch. In the north, it joins with the Aden–Red Sea rift zone. Active faults in Egypt, Libya and Tunis may represent a link between the East African rift system and Pantellerian rift zone in the Mediterranean. The third group included rare faults in the west of Equatorial Africa. The data were scarce, so that most of the faults of this group were identified solely by interpretation of space imageries and seismicity. Some longer faults of the group may continue the transverse faults of the Atlantic and thus can penetrate into the mantle. This seems evident for the Cameron fault line. 相似文献
20.
Structural studies of the Barmer Basin in Rajasthan, northwest India, demonstrate the important effect that pre-existing faults can have on the geometries of evolving fault systems at both the outcrop and basin-scale. Outcrop exposures on opposing rift margins reveal two distinct, non-coaxial extensional events. On the eastern rift margin northwest–southeast extension was accommodated on southwest- and west-striking faults that form a complex, zig-zag fault network. On the western rift margin northeast–southwest extension was accommodated on northwest-striking faults that form classical extensional geometries.Combining these outcrop studies with subsurface interpretations demonstrates that northwest–southeast extension preceded northeast–southwest extension. Structures active during the early, previously unrecognised extensional event were variably incorporated into the evolving fault systems during the second. In the study area, an inherited rift-oblique fault transferred extension from the rift margin to a mid-rift fault, rather than linking rift margin fault systems directly. The resultant rift margin accommodation structure has important implications for early sediment routing and depocentre evolution, as well as wider reaching implications for the evolution of the rift basin and West Indian Rift System. The discovery of early rifting in the Barmer Basin supports that extension along the West Indian Rift System was long-lived, multi-event, and likely resulted from far-field plate reorganisations. 相似文献