首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.

The Mio-Pliocene aquifer of the coastal sedimentary basin of Benin is the most exploited aquifer for water supply to the urbanised region in the southern part of the country. The population explosion is putting increasing pressure on quantitative and qualitative aspects of the groundwater resources. Preventing groundwater contamination caused by surface waters requires a thorough understanding of surface-water/groundwater interactions, especially the interactions between the Mio-Pliocene aquifer and surface waters. This study aimed to investigate the interactions between groundwater and surface waters along the major rivers (Sô River and Ouémé Stream) and brooks in the Ouémé Delta. Field campaigns identified 75 springs located in the valleys which feed the rivers, and thus maintain their base flow. The piezometric results indicated, through flow direction assessment, that the Mio-Pliocene aquifer feeds Ouémé Stream and Sô River. Chemical analyses of groundwater and surface waters show similar chemical facies, and changes in the chemical composition in groundwater are also observed in the surface waters. Moreover, the isotopic signatures of surface waters are similar to those of the groundwater and springs, which led to the identification of potential groundwater discharge areas. As a result of groundwater discharge into surface waters, the fraction of groundwater in the surface water is more than 66% in the brooks, regardless of the season. In the Ouémé Stream and Sô River, the fraction of groundwater is 0–21% between June and September, while from October to March it is 47–100%.

  相似文献   

2.
Small quantities of groundwater interact with hydrothermal surface water to drive in-stream geochemical processes in a silica-armored hot-spring outflow channel in Yellowstone National Park, USA. The objective of this study was to characterize the hydrology and geochemistry of this unique system in order to (1) learn more about the Yellowstone Plateau’s subsurface water mixing between meteoric and hydrothermal waters and (2) learn more about the chemical and physical processes that lead to accumulation of streambed cements, i.e., streambed armor. A combination of hydrological, geochemical, mineralogical, microscopic, and petrographic techniques were used to identify groundwater and surface-water exchange. Interaction could be identified in winter because of differences in surface water and groundwater composition but interaction at other times of the year cannot be ruled out. Dissolved constituents originating from groundwater (e.g., Fe(II) and Mg) were traced downstream until oxidation and/or subsequent precipitation with silica removed them, particularly where high affinity substrates like cyanobacterial surfaces were present. Because the stream lies in a relatively flat drainage basin and is fed mainly by a seasonally relatively stable hot spring, this system allowed study of the chemical processes along a stream without the obscuring effects of sedimentation.  相似文献   

3.
Thermal water samples and related young and fossil mineralization from a geothermal system at the northern margin of the Upper Rhine Graben have been investigated by combining hydrochemistry with stable and Sr isotope geochemistry. Actively discharging thermal springs and mineralization are present in a structural zone that extends over at least 60 km along strike, with two of the main centers of hydrothermal activity being Wiesbaden and Bad Nauheim. This setting provides the rare opportunity to link the chemistry and isotopic signatures of modern thermal waters directly with fossil mineralization dating back to at least 500–800 ka. The fossil thermal spring mineralization can be classified into two major types: barite-(pyrite) fracture filling associated with laterally-extensive silicification; and barite, goethite and silica impregnation mineralization in Tertiary sediments. Additionally, carbonatic sinters occur around active springs. Strontium isotope and trace element data suggest that mixing of a hot (>100 °C), deep-sourced thermal water with cooler groundwater from shallow aquifers is responsible for present-day thermal spring discharge and fossil mineralization. The correlation between both Sr and S isotope ratios and the elevation of the barite mineralization relative to the present-day water table in Wiesbaden is explained by mixing of deep-sourced thermal water having high 87Sr/86Sr and low δ34S with shallow groundwater of lower 87Sr/86Sr and higher δ34S. The Sr isotope data demonstrate that the hot thermal waters originate from an aquifer in the Variscan crystalline basement at depths of 3–5 km. The S isotope data show that impregnation-type mineralization is strongly influenced by mixing with SO4 that has high δ34S values. The fracture style mineralization formed by cooling of the thermal waters, whereas impregnation-type mineralization precipitated by mixing with SO4-rich groundwater percolating through the sediments.  相似文献   

4.
Hydrogeochemistry and environmental isotope data were utilized to understand origins and characteristics of the thermal springs in southern Gaoligong Mountains, China. The groundwater at the thermal springs has low values of total dissolved solids, and its main water types are Na-HCO3. The thermal springs are mainly recharged from meteoric precipitations. The recharge areas are located near the springs at an approximate elevation of 1,800 m. The groundwater of the thermal springs is immature and partially equilibrated with a strong mixture of the shallow cold waters during the flow process. The shallow cold water accounts for more than 90 %. The temperatures of thermal reservoir that feed the springs are between 146 and 260 °C, and the calculated groundwater circulation depths range from 2,000 to 5,700 m below ground surface.  相似文献   

5.
Hydrological interactions between surface water and groundwater (GW) can be described using hydrochemical and biological methods. Surface water–groundwater interactions and their effects on groundwater invertebrate communities were studied in the Nakdong River floodplain in South Korea. Furthermore, the GW-Fauna-Index, a promising new index for assessing the strength of surface-water influence on groundwater, was tested. The influence of surface water on groundwater decreased with increasing depth and distance from the river. While hydrochemistry prevailingly reflected the origin of the waters in the study area (i.e. whether alluvial or from adjacent rock), faunal communities seemed to display an affinity to surface-water intrusion. Fauna reacted quickly to changes in hydrology, and temporal changes in faunal community structure were significantly linked to the hydrological situation in the floodplain. The metazoan faunal community and the GW-Fauna-Index allow a distinction between surface and subsurface waters with varying degrees of exchange. The results indicate that hydrological conditions are reflected by faunal assemblages on a high spatiotemporal resolution, and that surface-water intrusion can be estimated using the GW-Fauna-Index.  相似文献   

6.
Mixing is a dominant hydrogeological process in the hydrothermal spring system in the Cappadocia region of Turkey. All springs emerge along faults, which have the potential to transmit waters rapidly from great depths. However, mixing with shallow meteoric waters within the flow system results in uncertainty in the interpretation of geochemical results. The chemical compositions of cold and warm springs and geothermal waters are varied, but overall there is a trend from Ca–HCO3 dominated to Na–Cl dominated. There is little difference in the seasonal ionic compositions of the hot springs, suggesting the waters are sourced from a well-mixed reservoir. Based on δ18O and δ2H concentrations, all waters are of meteoric origin with evidence of temperature equilibration with carbonate rocks and evaporation. Seasonal isotopic variability indicates that only a small proportion of late spring and summer precipitation forms recharge and that fresh meteoric waters move rapidly into the flow system and mix with thermal waters at depth. 3H and percent modern carbon (pmC) values reflect progressively longer groundwater pathways from cold to geothermal waters; however, mixing processes and the very high dissolved inorganic carbon (DIC) of the water samples preclude the use of either isotope to gain any insight on actual groundwater ages.  相似文献   

7.
The Yangbajing geothermal field with the highest reservoir temperature among Chinese hydrothermal systems is located about 90 km northwest to Lhasa City, capital of Tibet, where high temperature geothermal fluids occur in two reservoirs: a shallow one at a depth of 180–280 m and a deep one at 950–1,850 m. In this study, Oxygen-18 and deuterium isotope compositions as well as 87Sr/86Sr ratios of water samples collected from geothermal wells, cold springs and surface water bodies were characterized to understand the genesis of geothermal fluids at Yangbajing. The results show that the deep geothermal fluid is the mixing product of both magmatic and infiltrating snow-melt water, whereas the shallow geothermal fluid is formed by the mixing of deep geothermal fluid with cold groundwater. Using a binary mixing model with deep geothermal fluid and cold groundwater as two endmembers, the mixing ratios of the latter in most shallow geothermal water samples were calculated to be between 40 and 50%. The combined use of O, H, and Sr isotopes proves to be an effective approach to depict the major sources of geothermal fluids and the mixing processes occurring in two reservoirs at Yangbajing.  相似文献   

8.
Environmental tracers (such as major ions, stable and radiogenic isotopes, and heat) monitored in natural waters provide valuable information for understanding the processes of river–groundwater interactions in arid areas. An integrated framework is presented for interpreting multi-tracer data (major ions, stable isotopes (2H, 18O), the radioactive isotope 222Rn, and heat) for delineating the river–groundwater interactions in Nalenggele River basin, northwest China. Qualitative and quantitative analyses were undertaken to estimate the bidirectional water exchange associated with small-scale interactions between groundwater and surface water. Along the river stretch, groundwater and river water exchange readily. From the high mountain zone to the alluvial fan, groundwater discharge to the river is detected by tracer methods and end-member mixing models, but the river has also been identified as a losing river using discharge measurements, i.e. discharge is bidirectional. On the delta-front of the alluvial fan and in the alluvial plain, in the downstream area, the characteristics of total dissolved solids values, 222Rn concentrations and δ18O values in the surface water, and patterns derived from a heat-tracing method, indicate that groundwater discharges into the river. With the environmental tracers, the processes of river–groundwater interaction have been identified in detail for better understanding of overall hydrogeological processes and of the impacts on water allocation policies.  相似文献   

9.
Mound springs provide the primary discharge mechanism for waters of the western margin of the Great Artesian Basin (GAB), Australia. Though these springs are an important resource in an arid environment, their hydraulics as they discharge from shale are poorly defined. The springs can include extensive spring tails (groundwater-dependent wetlands) and hundreds of springs in a given spring complex. Electrical resistivity imaging (ERI) was used to evaluate spring subsurface hydraulic-connectivity characteristics at three spring complexes discharging through the Bulldog Shale. The results demonstrate that fresher GAB water appears as resistors in the subsurface at these sites, which are characterized by high-salinity conditions in the shallow subsurface. Using an empirical method developed for this work, the ERI data indicate that the spring complexes have multiple subsurface connections that are not always easily observed at the surface. The connections are focused along structural deformation in the shale allowing fluids to migrate through the confining unit. The ERI data suggest the carbonate deposits that the springs generate are deposited on top of the confining unit, not precipitated in the conduit. The data also suggest that spring-tail ecosystems are not the result of a single discharge point, but include secondary discharge points along the tail.  相似文献   

10.
This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO4 type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO3 type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ18O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO4 water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.  相似文献   

11.
Little is known of the interactions between groundwater and surface water on deeply weathered landscapes of low relief in the Great Lakes Region of Africa (GLRA). The role of groundwater in sustaining surface-water levels during periods of absent rainfall is disputed and groundwater is commonly excluded from estimations of surface-water balances. Triangulated piezometers installed beside lake gauging stations on Lake Victoria and Lake Kyoga in Uganda provide the first evidence of the dynamic interaction between groundwater and surface water in the GLRA. Stable isotope ratios (2H:1H, 18O:16O) support piezometric evidence that groundwater primarily discharges to lakes but show further that mixing of groundwater and lake water has occurred at one site on Lake Victoria (Jinja). Layered-aquifer heterogeneity, wherein fluvial-lacustrine sands overlie saprolite, gives rise to both rapid and slow groundwater fluxes to lakes which is evident from the recession of borehole hydrographs following recharge events. Darcy throughflow calculations suggest that direct contributions from groundwater to Lake Victoria comprise <1% of the total inflows to the lake. Groundwater/surface-water interactions are strongly influenced by changing drainage base (lake) levels that are controlled, in part, by regional climate variability and dam releases from Lake Victoria (Jinja).  相似文献   

12.
《Applied Geochemistry》2006,21(2):289-304
Mineral springs from Daylesford, Australia discharge at ambient temperatures, have high CO2 contents, and effervesce naturally. Mineral waters have high HCO3 and Na concentrations (up to 4110 and 750 mg/L, respectively) and CO2 concentrations of 620–2520 mg/L. Calcium and Mg concentrations are 61–250 and 44–215 mg/L, respectively, and Si, Sr, Ba, and Li are the most abundant minor and trace elements. The high PCO2 of these waters promotes mineral dissolution, while maintaining low pH values, and geochemical modelling indicates that the CO2-rich mineral water must have interacted with both sediments and basalts. Amorphous silica concentrations and silica geothermometry indicate that these waters are unlikely to have been heated above ambient temperatures and therefore reflect shallow circulation on the order of several hundreds of metres. Variations in minor and trace element composition from closely adjacent spring discharges indicate that groundwater flows within relatively isolated fracture networks. The chemical consistency of individual spring discharges over at least 20 a indicates that flow within these fracture networks has remained isolated over long periods. The mineral water resource is at risk from mixing with potentially contaminated surface water and shallow groundwater in the discharge areas. Increased δ2H values and Cl concentrations, and lower Na concentrations indicate those springs that are most at risk from surface contamination and overpumping. Elevated NO3 concentrations in a few springs indicate that these springs have already been contaminated during discharge.  相似文献   

13.
The impact of groundwater withdrawals on the interaction between multi-layered aquifers with different water qualities in the Viterbo geothermal area (central Italy) was studied. In this area, deep thermal waters are used to supply thermal spas and public pools. A shallow overlying aquifer carries cold and fresh water, used for irrigation and the local drinking-water supply. Starting with a conceptual hydrogeological model, two simplified numerical models were implemented: a steady-state flow model of the entire groundwater system, and a steady-state flow and heat transport model of a representative area, which included complex interactions between the aquifers. The impact of increased withdrawals associated with potential future development of the thermal aquifer must be considered in terms of the water temperature of the existing thermal sources. However, withdrawals from the shallow aquifer might also influence the discharge of thermal sources and quality of the water withdrawn from the shallow wells. The exploitation of the two aquifers is dependent on the hydraulic conductivity and thickness of the intervening aquitard, which maintains the delicate hydrogeological equilibrium. Effective methods to control this equilibrium include monitoring the vertical gradient between the two aquifers and the residual discharge of natural thermal springs.  相似文献   

14.
An integrated survey program involving geological, hydrogeological and geophysical techniques has been employed to characterize the aquifer geometry, recharge and circulation dynamics of thermal springs within a shallow aquifer system in Ethiopia. The selected springs for the case study are Sodere and Gergedi, which are situated within the tectonically active Main Ethiopian Rift (MER). Geologically, the studied springs are located on Plio-Quaternary volcanic rocks. The geophysical results indicate the presence of subsurface weak zones represented by extensional tectonics and weathering zones which are responsible for thermal water circulation and facilitate recharge from the adjacent surface-water bodies. The structures inferred by the resistivity survey, both sounding and electrical tomography, present contrasts in rock resistivity response. The anomalous zones in the magnetic data are in good agreement with the zones that are revealed by geological mapping and surface manifestation of the thermal water discharge zones. The shallow aquifer of the central MER is under the influence of thermal water, which increases the groundwater temperature and mineral content.  相似文献   

15.
Large karstic springs in east-central Florida, USA were studied using multi-tracer and geochemical modeling techniques to better understand groundwater flow paths and mixing of shallow and deep groundwater. Spring water types included Ca–HCO3 (six), Na–Cl (four), and mixed (one). The evolution of water chemistry for Ca–HCO3 spring waters was modeled by reactions of rainwater with soil organic matter, calcite, and dolomite under oxic conditions. The Na–Cl and mixed-type springs were modeled by reactions of either rainwater or Upper Floridan aquifer water with soil organic matter, calcite, and dolomite under oxic conditions and mixed with varying proportions of saline Lower Floridan aquifer water, which represented 4–53% of the total spring discharge. Multiple-tracer data—chlorofluorocarbon CFC-113, tritium (3H), helium-3 (3Hetrit), sulfur hexafluoride (SF6)—for four Ca–HCO3 spring waters were consistent with binary mixing curves representing water recharged during 1980 or 1990 mixing with an older (recharged before 1940) tracer-free component. Young-water mixing fractions ranged from 0.3 to 0.7. Tracer concentration data for two Na–Cl spring waters appear to be consistent with binary mixtures of 1990 water with older water recharged in 1965 or 1975. Nitrate-N concentrations are inversely related to apparent ages of spring waters, which indicated that elevated nitrate-N concentrations were likely contributed from recent recharge.The online version of the original article can be found at  相似文献   

16.
《Applied Geochemistry》2000,15(3):311-325
Barium/Sr and Ca/Sr ratios have been used to model the relative importance of different sources of stream water. Major and trace element concentrations together with 87Sr/86Sr ratios were measured in precipitation, soil water, groundwater and stream water in a small (9.4 km2) catchment in northern Sweden. The study catchment is drained by a first order stream and mainly covered with podzolized Quaternary till of granitic composition. It is underlain by a 1.8 Ga granite. A model with mixing equations used in an iterative mode was developed in order to separate the stream water into 3 subsurface components: soil water, shallow groundwater, and deep groundwater. Contributions from precipitation are thus not included in the model. This source may be significant for the stream water generation, but it does not interfere with the calculations of the relative contributions from the subsurface components. The results show that the deep groundwater constitutes between 5 and 20% of the subsurface water discharge into the stream water. The highest values of the deep groundwater fraction occur during base flow. Soil water dominates during snowmelt seasons, whereas during base flow it is the least important fraction. Soil water accounts for 10–100% of the subsurface water discharge into the stream water. Shallow groundwater accounts for up to 80% of the subsurface water discharge with the lowest values at peak discharge during snowmelt seasons and the highest values during base flow. The validity of the model was tested by comparing the measured 87Sr/86Sr ratios in the stream water with the 87Sr/86Sr ratios predicted by the model. There was a systematic difference between the measured and modelled 87Sr/86Sr ratios which suggests that the fraction of soil water is overestimated by the model, especially during spring flood. As a consequence of this overestimation of soil water the amount of shallow groundwater is probably underestimated during this period. However, it is concluded that the differences between measured and predicted values are relatively small, and that element ratios are potentially effective tracers for different subsurface water flowpaths in catchments.  相似文献   

17.
Discharge areas of carbonate fractured and karstified aquifers are a sensitive system of great interest, where frequently groundwater resources are tapped for drinking water supply. In geological settings affected by recent and/or active tectonics, mixing between fresh water coming from recharge areas and groundwater from deeper circuits, influenced by raising fluids, influences hydrogeochemistry. Surveys on major ions, trace elements and stable isotopes have been performed in the San Vittorino Plain (Central Italy), where the major source of drinking water for Rome is located (Peschiera Springs, mean discharge 18 m3 s?1, half of them tapped). Results of 21 springs revealed different contribution from recharge areas and deep flow paths, by increasing salinity and ion content, with particular references to Ca2+, HCO3 ? and SO4 2?. Three main groups, respectively, related to fresh waters from recharge areas, groundwater from deep contribution and a mixing group between them, have been identified. Water stable isotopes allow to identify the common origin from rainfall and a very steady contribution with seasons and year, due to the huge extent of recharge area (>1000 km2). Saturation Indexes gave insight on the contribution of deep fluids, mainly CO2 and H2S, which turned groundwater to undersaturated conditions, facilitating rock dissolution. By PHREEQC software, the mixing between two considered end-members has been simulated, evaluating about 25% of deep contribution in the basal springs of San Vittorino Plain. Chemistry of Peschiera spring reveals a very limited percentage of deep flow paths (10%), which can lead to slight hydrochemistry changes even in possible drought conditions, when discharge can decrease until 15 m3 s?1.  相似文献   

18.
Large karstic springs in east-central Florida, USA were studied using multi-tracer and geochemical modeling techniques to better understand groundwater flow paths and mixing of shallow and deep groundwater. Spring water types included Ca–HCO3 (six), Na–Cl (four), and mixed (one). The evolution of water chemistry for Ca–HCO3 spring waters was modeled by reactions of rainwater with soil organic matter, calcite, and dolomite under oxic conditions. The Na–Cl and mixed-type springs were modeled by reactions of either rainwater or Upper Floridan aquifer water with soil organic matter, calcite, and dolomite under oxic conditions and mixed with varying proportions of saline Lower Floridan aquifer water, which represented 4–53% of the total spring discharge. Multiple-tracer data—chlorofluorocarbon CFC-113, tritium (3H), helium-3 (3Hetrit), sulfur hexafluoride (SF6)—for four Ca–HCO3 spring waters were consistent with binary mixing curves representing water recharged during 1980 or 1990 mixing with an older (recharged before 1940) tracer-free component. Young-water mixing fractions ranged from 0.3 to 0.7. Tracer concentration data for two Na–Cl spring waters appear to be consistent with binary mixtures of 1990 water with older water recharged in 1965 or 1975. Nitrate-N concentrations are inversely related to apparent ages of spring waters, which indicated that elevated nitrate-N concentrations were likely contributed from recent recharge.An erratum to this article can be found at  相似文献   

19.
A conceptual model of groundwater and surface-water interactions in areas of minor aquifers has been developed. It assesses the interplay of reach-scale subsurface flow paths (RSSF), controlled by the lateral extent of the alluvial valley, and channel unit-scale hyporheic flow paths (CUSHF), controlled by riffle and run/pool sequences, and their impacts on the spatial variability of riverbed flow and solute exchange. A network of riverbed mini-piezometers and multi-level samplers in different reach- and channel-unit scale settings of the River Don (South Yorkshire, UK) is monitored to: (1) estimate vertical hydraulic gradients (VHGs) and specific discharge; (2) discriminate subsurface flow paths from conservative natural tracers; and (3) deduce biogeochemical processes. In a constrained context (downstream end of the alluvial valley), RSSF discharge favours a homogeneous riverbed hydrochemistry with limited biogeochemical processes and shallow CUSHF. In an unconstrained (open alluvial valley) or asymmetric (bedrock outcropping on one bank) context, low VHGs favour deep CUSHF and a vertical stratification of RSSF. Reducing conditions intensify with depth, and superimpose with mixing in riffles. This good approximation of flow and solute behaviour in minor aquifers provides a practical framework to understand nutrient and contaminant fate and develop cost-effective monitoring programmes across the groundwater/surface-water interface.  相似文献   

20.
Identification and quantification of groundwater and surface-water interactions provide important scientific insights for managing groundwater and surface-water conjunctively. This is especially relevant in semi-arid areas where groundwater is often the main source to feed river discharge and to maintain groundwater dependent ecosystems. Multiple field measurements were taken in the semi-arid Bulang sub-catchment, part of the Hailiutu River basin in northwest China, to identify and quantify groundwater and surface-water interactions. Measurements of groundwater levels and stream stages for a 1-year investigation period indicate continuous groundwater discharge to the river. Temperature measurements of stream water, streambed deposits at different depths, and groundwater confirm the upward flow of groundwater to the stream during all seasons. Results of a tracer-based hydrograph separation exercise reveal that, even during heavy rainfall events, groundwater contributes much more to the increased stream discharge than direct surface runoff. Spatially distributed groundwater seepage along the stream was estimated using mass balance equations with electrical conductivity measurements during a constant salt injection experiment. Calculated groundwater seepage rates showed surprisingly large spatial variations for a relatively homogeneous sandy aquifer.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号