共查询到20条相似文献，搜索用时 31 毫秒
1.
Laust B. Pedersen Lena Persson Mehrdad Bastani Sören Byström 《Journal of Applied Geophysics》2009,67(3):250-258
Airborne VLF data are routinely collected by The Geological Survey of Sweden (SGU) as part of its bedrock mapping programme. In this paper we demonstrate that the novel Tensor VLF technique developed at Uppsala University and SGU can provide useful qualitative and quantitative information about the electrical conductivity distribution in the upper few hundred meters. Single transmitter scalar VLF maps emphasize those conductive structures that have dominant strikes in the direction of the transmitter. The tensor tipper (essentially the vertical magnetic field from currents along the strike direction) calculated from multiple transmitters is dependent only upon the underlying conductivity structure. Transformation of the tipper into the peaker (the horizontal divergence) has proven to enhance the lateral resolution while the transformation to the apparent resistivity can be used to discriminate different rock types. Two case histories from the application of VLF data are presented in this study. Two dimensional structures can be quantitatively modelled by modern inversion methods developed originally for deep electromagnetic MT soundings. Direct inversion of the real and imaginary parts of the tipper provides more quantitative information about the subsurface resistivity distribution. 相似文献
2.
正交水平磁偶源是模拟天然场源的较好人工源,可以方便地实现可控源高频大地电磁张量测量.正交水平磁偶源的电磁场分布规律是野外工作布置的理论基础,为此计算了均匀大地模型正交水平磁偶源的电磁场.计算结果表明:电磁场水平分量在各个象限都有一相对低值带,对应的标量视电阻率形成了畸变带,但张量视电阻率畸变带消失;张量视电阻率曲线形态显示出近区的低阻、过渡区的高阻隆起和远区趋于真值的规律.通过野外试验验证理论计算结果,在无法准确确定地下介质电阻率参数的情况下,以天然电磁场计算的电阻率为参照对比研究了正交水平磁偶源电磁场的分布规律.试验结果表明:正交水平磁偶源与电偶源的电磁场同样的存在近区、过渡区和远区;在远区,正交水平磁偶源与测点的相对位置对张量测量结果几乎没有影响,即在远区可以在任何方位测量;正交水平磁偶源的布置要考虑收发距的影响,保证测量在远区进行. 相似文献
3.
AJIT K. SINHA 《Geophysical Prospecting》1989,37(4):427-445
The measurement of wavetilt is diagnostic for determining the electrical characteristics of the upper layers of the ground at VLF and LF frequency ranges. Theoretical and field studies have indicated that electric wavetilt using the transverse magnetic (TM) waves detects lateral inhomogeneities virtually instantly as abrupt changes in electrical properties are encountered. Theoretical studies have also indicated that magnetic wavetilt measurements using transverse electric (TE) waves are superior to electric wavetilts for such purposes. An experimental survey was conducted at two locations near Atikokan, Ontario, to verify the theoretical predictions. The survey area, forming a part of a large granitic pluton, was mapped earlier by various geophysical techniques, including the ground VLF-EM method, to detect weak conductors formed either by the presence of fractures in the bedrock filled with water and/or clay, or overburden filling bedrock depressions. A small, multi-turn, horizontal loop was used during the survey as the transmitter to generate TE waves at eleven frequencies from 10.7 to 58.5 kHz. The magnetic wavetilt measurements detected all previously known conductors at the two locations. In addition, the survey detected several weak conductors that were missed by the VLF survey. Thus, the survey indicated the usefulness of magnetic wavetilt results for detection of weak conductors at shallow depths, which may have application in engineering geophysical surveys. The multi-frequency wavetilt data also provided some indications of the depth and depth extent of such conductors. 相似文献
4.
J. DUROUX 《Geophysical Prospecting》1967,15(4):564-583
The electromagnetic field radiated from a magnetic dipole lying on the ground is considered, in the extremely low frequency range (DC to 20 000 Hertz). Theoretical and experimental data are given on the characteristics of the surface wave (vanishing wave) generated at the air-ground interface, in the case of an homogeneous subsurface. The case of a subsurface with electrical resistivity varying with depth is considered. It is shown how the above-mentioned characteristics may be applied in the quantitative investigation of the electrical resistivity of the subsurface as a function of depth, in a method using the measurements on the ground of all the components of the radiated field: horizontal electrical components, vertical and horizontal magnetic components. 相似文献
5.
A combination of magnetotelluric (MT) measurements on the surface and in boreholes (without metal casing) can be expected to enhance resolution and reduce the ambiguity in models of electrical resistivity derived from MT surface measurements alone. In order to quantify potential improvement in inversion models and to aid design of electromagnetic (EM) borehole sensors, we considered two synthetic 2D models containing ore bodies down to 3000 m depth (the first with two dipping conductors in resistive crystalline host rock and the second with three mineralisation zones in a sedimentary succession exhibiting only moderate resistivity contrasts). We computed 2D inversion models from the forward responses based on combinations of surface impedance measurements and borehole measurements such as (1) skin-effect transfer functions relating horizontal magnetic fields at depth to those on the surface, (2) vertical magnetic transfer functions relating vertical magnetic fields at depth to horizontal magnetic fields on the surface and (3) vertical electric transfer functions relating vertical electric fields at depth to horizontal magnetic fields on the surface. Whereas skin-effect transfer functions are sensitive to the resistivity of the background medium and 2D anomalies, the vertical magnetic and electric field transfer functions have the disadvantage that they are comparatively insensitive to the resistivity of the layered background medium. This insensitivity introduces convergence problems in the inversion of data from structures with strong 2D resistivity contrasts. Hence, we adjusted the inversion approach to a three-step procedure, where (1) an initial inversion model is computed from surface impedance measurements, (2) this inversion model from surface impedances is used as the initial model for a joint inversion of surface impedances and skin-effect transfer functions and (3) the joint inversion model derived from the surface impedances and skin-effect transfer functions is used as the initial model for the inversion of the surface impedances, skin-effect transfer functions and vertical magnetic and electric transfer functions. For both synthetic examples, the inversion models resulting from surface and borehole measurements have higher similarity to the true models than models computed exclusively from surface measurements. However, the most prominent improvements were obtained for the first example, in which a deep small-sized ore body is more easily distinguished from a shallow main ore body penetrated by a borehole and the extent of the shadow zone (a conductive artefact) underneath the main conductor is strongly reduced. Formal model error and resolution analysis demonstrated that predominantly the skin-effect transfer functions improve model resolution at depth below the sensors and at distance of \(\sim \) 300–1000 m laterally off a borehole, whereas the vertical electric and magnetic transfer functions improve resolution along the borehole and in its immediate vicinity. Furthermore, we studied the signal levels at depth and provided specifications of borehole magnetic and electric field sensors to be developed in a future project. Our results suggest that three-component SQUID and fluxgate magnetometers should be developed to facilitate borehole MT measurements at signal frequencies above and below 1 Hz, respectively. 相似文献
6.
George F. Risk T. Grant Caldwell Hugh M. Bibby 《Journal of Volcanology and Geothermal Research》2003,127(1-2):33-54
Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary. 相似文献
7.
Very low frequency (VLF) military communications systems provide a primary field that can be used for shallow geophysical surveys to locate ground water contamination and vertical geologic contacts. Useful properties that can be easily obtained from the interaction of the earth and the primary field are the magnitude of the vertical secondary magnetic field, the surface impedence, and the phase angle between the electrical and magnetic horizontal components. The variations in the secondary magnetic field can be related to vertical geologic contacts, such as the edges of landfill trenches. The surface impedence yields an apparent terrain conductivity, which can be used to locate low-resistivity anomalies often associated with contaminated ground water. The phase angle gives information on vertical variations in resistivity, phase angles less than 45° indicating increasing resistivity with depth. The depth of penetration of the VLF field is about one skin depth. For a frequency of 20 kHz, the skin depth in meters is approximately equal to 3.67 where p is terrain resistivity in ohmmeters. 相似文献
8.
Amir Haroon Andrei Swidinsky Sebastian Hölz Marion Jegen Bülent Tezkan 《Geophysical Prospecting》2020,68(9):2825-2844
The time-domain controlled source electromagnetic method is a geophysical prospecting tool applied to image the subsurface resistivity distribution on land and in the marine environment. In its most general set-up, a square-wave current is fed into a grounded horizontal electric dipole, and several electric and magnetic field receivers at defined offsets to the imposed current measure the electromagnetic response of the Earth. In the marine environment, the application often uses only inline electric field receivers that, for a 50% duty-cycle current waveform, include both step-on and step-off signals. Here, forward and inverse 1D modelling is used to demonstrate limited sensitivity towards shallow resistive layers in the step-off electric field when transmitter and receivers are surrounded by conductive seawater. This observation is explained by a masking effect of the direct current signal that flows through the seawater and primarily affects step-off data. During a step-off measurement, this direct current is orders of magnitude larger than the inductive response at early and intermediate times, limiting the step-off sensitivity towards shallow resistive layers in the seafloor. Step-on data measure the resistive layer at times preceding the arrival of the direct current signal leading to higher sensitivity compared to step-off data. Such dichotomous behaviour between step-on and step-off data is less obvious in onshore experiments due to the lack of a strong overlying conductive zone and corresponding masking effect from direct current flow. Supported by synthetic 1D inversion studies, we conclude that time-domain controlled source electromagnetic measurements on land should apply both step-on and step-off data in a combined inversion approach to maximize signal-to-noise ratios and utilize the sensitivity characteristics of each signal. In an isotropic marine environment, step-off electric fields have inferior sensitivity towards shallow resistive layers compared to step-on data, resulting in an increase of non-uniqueness when interpreting step-off data in a single or combined inversion. 相似文献
9.
VLF wave impedance measurements have been successfully used to detect air-filled drainage galleries near the town of Alcala, Spain. The galleries are detectable by H-polarization electric field measurements due to the electric field anomalies associated with the galleries and overlying gravel deposits. The forced deviation of the primary current flowlines around the 2D void results in a higher-than-normal apparent resistivity and a relative phase low above the gallery. The findings support earlier theoretical predictions that at very low frequencies (VLFs), galvanic current effects may dominate over vortex currents in moderately conductive terrains. Theoretical modelling confirmed that for a resistive target no detectable E-polarization response can be expected from either magnetic or electric field measurements since current line deviations and vortex effects are negligible under such circumstances. The results demonstrate the importance of using at least two orthogonal VLF transmitters in order that anomalies arising from both galvanic and inductive effects may be identified, irrespective of orientation. 相似文献
10.
David Beamish 《Journal of Applied Geophysics》1994,32(4)
Very low frequency electromagnetic (EM) methods using VLF transmitters have found many applications in subsurface geophysical investigations. Surface measurements involving both the vertical component of the magnetic field (VLF-EM or VLF-Z) and of the apparent resistivity (VLF-R) are increasingly common. Although extensive VLF data sets have been successfully used for mapping purposes, modelling and interpretation techniques which asess the third (i.e. depth) dimension appear limited.Given a profile of VLF-R measurements the main purpose of the present study is to demonstrate an automatic method for the construction of a resistivity cross-section. The technique used is one of a new generation of regularised inversion methods. These techniques attempt to overcome the problem of equivalence/non-uniqueness in EM sounding data by constructing the resistivity distribution with the minimum amount of structure that fits the data.VLF data represent a special case of plane-wave EM sounding in that they conform, in practice, to a single-frequency technique. This fact imposes a limitation in the amount of vertical resolution that we can expect using such data. In the case of two-dimensional modelling and inversion, resolution through the cross-section is a resultant attribute from both vertical and lateral resistivity gradients within the subsurface. In order to provide insight into the practical application of regularised inversion techniques to VLF data, both synthetic and field examples are considered. Both sets of examples are primarily concerned with VLF data applied to near-surface fault mapping where the main aim is to assess the location, dip and depth extent of conductive subsurface features. 相似文献
11.
常规的可控源电磁法理论在计算视电阻率公式上,多半采用其电磁场的渐近特征,难以直接反映全区视电阻率的值,及直观地显现地下介质的地质构造.文中采用水平偶极子激发的电磁场,提出了电场的全区精确表达式,直接计算出大地电阻率.利用汉克尔数值滤波算法和逆样条插值算法对水平层状电磁场进行正演计算,并与计算的卡尼亚视电阻率的对比和野外试验结果表明：该方法的结果在远区等价卡尼亚电阻率,在近区和过渡带则明显地改善了卡尼亚电阻率的非波场区场畸变,从而能更好地接近基底的真电阻率,更形象地反映了地下介质的垂向电性变化. 相似文献
12.
本文根据视电阻率定义的原则,以及用不同的场量定义的视电阻率效果不同这一事实,提出一种新的全波视电阻率定义.在全区同时用均匀大地上电磁场的三个分量来分区定义祝电阻率.在远区视电阻率由磁场的水平分量求出,在近区由磁场的垂直分量或其实分量定义,而在过渡区则由电场的水平分量确定.用这种方法定义的视电阻率为电磁响应的单值函数,它随频率变化的曲线显著改善,能直观地反映地层电阻率随深度的变化,数值比较接近地层的真电阻率值,假极值效应明显压低.在计算中用切比雪夫多项式分段拟合均匀大地电磁响应的反函数,并给出一套系数,由此算出的视电阻率误差小于1％. 相似文献
13.
Controlled‐source electromagnetic monitoring of reservoir oil saturation using a novel borehole‐to‐surface configuration 
下载免费PDF全文
下载免费PDF全文 To advance and optimize secondary and tertiary oil recovery techniques, it is essential to know the areal propagation and distribution of the injected fluids in the subsurface. We investigate the applicability of controlled‐source electromagnetic methods to monitor fluid movements in a German oilfield (Bockstedt, onshore Northwest Germany) as injected brines (highly saline formation water) have much lower electrical resistivity than the oil within the reservoir. The main focus of this study is on controlled‐source electromagnetic simulations to test the sensitivity of various source–receiver configurations. The background model for the simulations is based on two‐dimensional inversion of magnetotelluric data gathered across the oil field and calibrated with resistivity logs. Three‐dimensional modelling results suggest that controlled‐source electromagnetic methods are sensitive to resistivity changes at reservoir depths, but the effect is difficult to resolve with surface measurements only. Resolution increases significantly if sensors or transmitters can be placed in observation wells closer to the reservoir. In particular, observation of the vertical electric field component in shallow boreholes and/or use of source configurations consisting of combinations of vertical and horizontal dipoles are promising. Preliminary results from a borehole‐to‐surface controlled‐source electromagnetic field survey carried out in spring 2014 are in good agreement with the modelling studies. 相似文献
14.
本文利用DEMETER卫星VLF频段电场和磁场频谱数据对DEMETER卫星运行期间2005年至2009年澳大利亚甚低频(Very Low Frequency)通信台NWC发射的通信信号造成的电离层电磁响应的日变化、季节变化及年变化特征进行了统计分析,统计结果表明电磁响应日变化显著,夜间电场强度明显增强可达40dB,磁场变化略小也可为15dB左右,而季节变化不显著,年变化主要受太阳活动的影响,太阳活动越强,电磁响应越小.为解释数据分析结果,对地-电离层电磁波传播过程采用传递矩阵方法进行了模拟计算,模拟结果与数据分析的结果一致.我们认为这种随时间变化的特点可能由250km以下电离层电子密度分布特征导致,因此研究250km以下的电离层电子密度变化可能对寻找地震电离层电磁异常有重要意义. 相似文献
15.
Sensitivity and inversion of marine electromagnetic data in a vertically anisotropic stratified earth 总被引：2，自引：0，他引：2
The controlled‐source electromagnetic (CSEM) and magnetotelluric method (MT) are two techniques that can be jointly used to explore the resistivity structure of the earth. Such methods have, in recent years, been applied in marine environments to the exploration and appraisal of hydrocarbons. In many situations the electric properties of the earth are anisotropic, with differences between resistivity in the vertical direction typically much higher than those in the horizontal direction. In cases such as this, the two modes of the time‐harmonic electromagnetic field are altered in different ways, implying that the sensitivity to the earth resistivity may vary significantly from one particular resistivity component (scalar, horizontal or vertical) to another, depending on the measurement configuration (range, azimuth, frequency or water depth). In this paper, we examine the sensitivity of the electromagnetic field to a vertically anisotropic earth for a typical set of configurations, compare inversion results of synthetic data characterizing a vertically anisotropic earth obtained using the isotropic and anisotropic assumptions and show that correctly accounting for anisotropy can prevent artefacts in inversion results. 相似文献
16.
John F. Hermance 《Physics of the Earth and Planetary Interiors》1973,7(3):349-364
The processing of magnetotelluric data involves concepts from electromagnetic theory, time series analysis and linear systems theory for reducing natural electric and magnetic field variations recorded at the earth's surface to forms suitable for studying the electrical properties of the earth's interior.The electromagnetic field relations lead to either a scalar transfer impedance which couples an electric component to an orthogonal magnetic component at the surface of a plane-layered earth, or a tensor transfer impedance which couples each electric component to both magnetic components in the vicinity of a lateral inhomogeneity.A number of time series spectral analysis methods can be used for estimating the complex spectral coefficients of the various field quantities. These in turn are used for estimating the nature of the transfer function or tensor impedance. For two dimensional situations, the tensor impedance can be rotated to determine the principal directions of the electrical structure.In general for real data, estimates of the apparent resistivity are more stable when calculated from the tensor elements rather than from simple orthogonal field ratios (Cagniard estimates), even when the fields are measured in the principal coordinates. 相似文献
17.
利用2005年1月至2010年11月DEMETER卫星记录的NWC发射站的VLF电场功率谱数据,采用指数拟合的方法,分析了VLF电磁波在卫星高度激发的电场空间分布和衰减特征.研究结果表明:(1)VLF电场在发射站上空及其磁共轭区有着很强的对应关系,存在南、北2个强电场中心涡;(2)相对于发射站的位置,VLF电场中心点具有经度和纬度偏移,日侧地磁经度偏移均值大于夜侧,而地磁纬度偏移均值则小于夜侧;(3)日侧VLF电场强度呈现出周期性的年变化;(4)在VLF电场中心10°范围内,电场强度随距离快速衰减,衰减常数b在长达6年的时间内保持稳定.在以上研究结果基础上初步构建的卫星高度人工源电磁波空间分布特征,将为研究地表-电离层电磁波传播机理提供基础技术支撑. 相似文献
18.
Ajit K. Sinha 《Pure and Applied Geophysics》1990,132(4):733-756
The response of two-dimensional, inclined, sheet-like conductors with, low conductance values to plane wave electromagnetic fields in the very low frequency (VLF) range has been evaluated by using a numerical technique. The conductance values of the conductors considered are appropriate for those produced by water and/or clay-filled fracture and shear zones in the Precambrian crystalline rocks of the Canadian Shield. The surrounding host rock was assumed to be, resistive with resistivities in the 1–10 k.m range to reflect the high resistivities over the shield areas. No overburden was assumed in this analysis.The results of the computations are presented in the form of characteristic interpretation diagrams to interpret ground VLF data in the field, where facilities for direct numerical modelling may not be available. A method for interpreting ground VLF data using such characteristic diagrams has been proposed in this paper which requires a prior knowledge of the host rock resistivity and the inclination of the conductor. These two parameters may be derived from a VLF resistivity survey and from appropriate filtering of the VLF tilt angle response. The interpretation method was applied to a ground VLF anomaly obtained at a research site near Atikokan in NW Ontario, which yielded an interpretation compatible with information from geological mapping.Geological Survey of Canada Contribution No. 51888. 相似文献
19.
Transient electromagnetic surveys with unimodal transverse magnetic field: ideas and results 下载免费PDF全文
下载免费PDF全文 Vladimir S. Mogilatov Arkadiy V. Zlobinskiy Boris P. Balashov 《Geophysical Prospecting》2017,65(5):1380-1397
The theory behind transient electromagnetic surveys can be well described in terms of transverse magnetic and transverse electric modes. Soundings using transverse magnetic and transverse electric modes require different source configurations. In this study, we consider an alternating transverse magnetic field excitation by a circular electric dipole. The circular electric dipole transmitter is a horizontal analogue of the vertical electric dipole. Offshore surveys using circular electric dipole might represent an alternative to the conventional marine controlled‐source electromagnetic method at shallow sea and/or for exploring relatively small targets. Field acquisition is carried out by recording either electric or magnetic responses. Electric responses bear information on the 1D structure of a layered earth and successfully resolve high‐resistivity targets in marine surveys. Land‐based circular electric dipole soundings are affected by induced polarisation. On the contrary, magnetic responses are absent on the surface of a 1D earth, and as a result, they are very sensitive to any and even very small 3D conductivity perturbations. In addition, they are sensitive to induced polarisation or some other polarisation effects in the subsurface. At present, circular electric dipole transmitters and magnetic receivers are successfully used in on‐land mineral and petroleum exploration. 相似文献
20.
A simple filter is developed which transforms VLF-EM real magnetic field transfer functions into apparent resistivities. It is based on the relationship between the horizontal derivative of the surface electric field and the vertical magnetic field at the surface of a two-dimensional earth model. The performance of this simple autoregressive filter is tested for modelled and real survey data. The technique yields profiles of apparent resistivity very similar, both in magnitude and in wavelength, to those which would have been obtained using VLF-EM resistivity measurements or d.c. resistivity profiling. This low-pass filter has the advantage of reducing high-wavenumber noise in the data; therefore only the major features of the VLF-EM profile are displayed. 相似文献