共查询到20条相似文献，搜索用时 93 毫秒
1.
为了研究斜井泥浆侵入储层的井周岩石物理特征,采用广义曲线坐标系统模拟斜井泥浆侵入特性,进而研究泥浆侵入过程的阵列侧向测井响应.数值仿真表明,采用广义曲线坐标系消除了笛卡儿坐标系统在斜井边界处网格划分的锯齿现象;储层非均质造成泥浆侵入不均匀,储层渗透性越好,泥浆滤液侵入越深;泥浆滤液侵入使得井周地层饱和度、孔隙水矿化度的分布发生变化,进而造成斜井井周岩石电阻率分布剖面复杂变化;泥浆侵入过程中阵列侧向视电阻率变化以及深浅视电阻率的幅度差异,有效反映了斜井泥浆侵入特性;文中采用了基于Marquardt方法的阵列侧向测井四参数反演,有效恢复了斜井储层侵入剖面,得到了原状地层电阻率.斜井泥浆侵入特征及其阵列侧向测井响应模拟分析,有助于正确认识斜井井周岩石物理特征和利用阵列侧向测井进行斜井储层评价. 相似文献
2.
阵列感应测井资料经常出现与井眼环境有关的质量问题.采用三维矢量有限元法分别在椭圆形井眼、仪器偏心及斜井条件下的阵列感应测井原始响应进行了模拟,并对环境校正和合成聚焦后的数据进行了分析.结果表明,线圈距较短的原始测量信号更易受井眼椭圆度、仪器偏心、泥浆电阻率及与地层电阻率反差的影响;而合成聚焦后的浅探测曲线虽然经过了环境校正和合成聚焦等数据处理,但仍然受这些因素的影响,这反映出阵列感应测井的数据处理是不完善的或采用的校正模型是理想化的;在井斜影响方面,浅探测曲线受井斜角大小影响相对较小,深探测曲线在井斜角为60°以上时受其影响较大而必须进行进一步处理. 相似文献
3.
Downhole resistivity measurements provide valuable information for geosteering and formation evaluation. It is important to understand and correct the environmental effects, such as the borehole, the tool eccentricity and the resistivity anisotropy effects, of the measurements based on fast and accurate modelling methods. A new pseudo-analytic solution for eccentric coaxial and tilted-coil antennas in the cylindrically multilayered medium with transverse isotropic conductivity was developed. This method can take the eccentric tool, the borehole, the mud invasion and the resistivity anisotropy into account. These formulas enable us to simulate the responses of the downhole induction logging tools, including induction wireline and azimuthal propagation logging-while-drilling measurements. Instead of using the prior fictitious boundary, the generalized reflection coefficients are proposed to construct the linear matrix functions to deal with the tool eccentricity. The cylindrical functions are reorganized and presented in forms of ratios. Thus, the proposed formulas obviate the overflow issue in the computation and are more stable and efficient. The proposed approach is compared and validated with other well-established methods. Simulations and case studies show that: (1) the responses of azimuthal resistivity logging-while-drilling tool are affected by the tool's eccentricity in both isotropic and anisotropic medium; (2) sine curve behaviours exist for the phase difference and amplitude ratio of azimuthal resistivity measurements along with different eccentricity azimuth. 相似文献
4.
本文对偶极横波远探测技术在随钻测井中的应用进行了探讨.对于随钻远探测而言,井中声源向井外地层中的辐射性能是它的主控因素.本文从井孔内外声场出发,考察了随钻和电缆测井中偶极声源的辐射效率,即声源产生的辐射波能流与沿井传播的导波能流之比;分析了声源的远场辐射指向性;基于声源辐射与接收之间的互易性,快速模拟和处理了随钻测井下SH和SV横波远探测波形.研究结果表明,随钻条件下SH和SV横波的最大辐射效率受钻铤的影响较电缆的情况降低了70%左右,且横波最大辐射效率对应的优势激发频率也从电缆的3.5kHz降为2.5kHz左右;虽然随钻偶极的横波辐射效率明显降低,但由理论模拟的随钻远探测数据的成像结果可知,声源辐射到地层中的横波能量仍足以探测井外反射体,表明随钻偶极远探测技术在理论上是可行的,本文结果为随钻偶极远探测测井提供了理论依据. 相似文献
5.
在随钻测井条件下,由于钻铤占据了井孔内的大部分空间,充液井孔中沿着井轴方向传播的模式波的特性与电缆测井非常不同.本文建立了随钻正交偶极子测井声学模型,采用三维有限差分方法模拟了偶极子声源在随钻条件下各向异性地层井孔内激发的声场,研究了地层的声学各向异性在随钻正交偶极子声波测井中的响应特征.数值模拟结果表明,在随钻测井条件下,对于井轴同TI地层对称轴垂直的情况,弯曲波分裂现象仍然存在,通过正交偶极子测量方式和合适的反演算法能够准确有效地确定地层的快横波方位角,可以考虑采用同正演理论相结合的反演算法来获得地层的快、慢横波速度及声学各向异性信息;对于井轴同介质对称轴呈一定夹角的TI地层井孔,情况变得非常复杂,不同井斜倾角下弯曲波的速度的变化趋势并非同对应的地层横波速度的变化趋势完全一致,不过在一定的频段内,地层横波速度仍然是弯曲波的最主要控制因素.对于本文研究的模型,当井轴同介质对称轴的夹角大于大于60°时,此时获得的弯曲波的各向异性值基本能够反映对应角度下地层横波速度的各向异性信息. 相似文献
6.
三维感应测井受井眼环境影响很大,如何消除这些不利影响是有效获取各向异性地层电导率真值并提高资料处理和解释质量的一项重要工作.本文以一维柱状各向异性地层模型为基础,通过最小平方反演技术从实际测量资料中快速反演井径、偏心距、泥浆电导率、地层水平电导率和各向异性系数等模型参数,设法减小井眼环境对测量结果的影响.首先,利用仪器偏心情况下不同旋转角电导率张量的关系方程,建立旋转角提取与校正方法,获取无旋转角三维感应测井数据.在此基础上,根据事先计算好的井眼校正库并结合多维非线性有限元逼近技术,建立快速计算三维感应测井响应以及Jacobi导数矩阵的插值公式,并利用自适应正则化迭代反演技术不断修改模型参数,实现理论合成资料与输入资料的最佳拟合.最后,通过反演出的模型参数计算三维感应测井资料所有分量的校正量,实现三维感应资料的井眼校正.理论模型和实际资料的处理结果均证实,在低阻井眼泥浆情况下,一维柱状模型中的反演方法仍然可以提取出较可靠的地层水平和垂直电导率,且井眼环境校正对于受井眼环境影响相对较小的测井曲线具有非常好的校正效果. 相似文献
7.
Response simulation and theoretical calibration of a dual-induction resistivity LWD tool 总被引：1，自引：1，他引：0
In this paper, responses of a new dual-induction resistivity logging-while-drilling （LWD） tool in 3D inhomogeneous formation models are simulated by the vectorfinite element method （VFEM）, the influences of the borehole, invaded zone, surroundingstrata, and tool eccentricity are analyzed, and calibration loop parameters and calibrationcoefficients of the LWD tool are discussed. The results show that the tool has a greater depthof investigation than that of the existing electromagnetic propagation LWD tools and is moresensitive to azimuthal conductivity. Both deep and medium induction responses have linearrelationships with the formation conductivity, considering optimal calibration loop parametersand calibration coefficients. Due to the different depths of investigation and resolution, deepinduction and medium induction are affected differently by the formation model parameters,thereby having different correction factors. The simulation results can provide theoreticalreferences for the research and interpretation of the dual-induction resistivity LWD tools. 相似文献
8.
There exist different response characteristics in the resistivity measurements of dual laterolog (DLL) and logging while drilling (LWD) electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method (3D-FEM) simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis. 相似文献
9.
在现有侧向测井仪器基础上,提出了一种新型贴井壁式阵列方位侧向测井电极系,该仪器能提供径向和周向方位电阻率测量.该电极系采用贴井壁测量方式,提供5种径向探测深度.利用三维有限元方法模拟了阵列方位侧向测井电极系的井眼影响特性、径向探测特性、纵向分层能力、方位分辨能力,并模拟其对井周地层、水平井非对称泥浆侵入和倾斜地层的响应.在导电泥浆中最大探测深度为1.23m,纵向分辨率为0.3m,可以识别出0.1m薄层,方位分辨率为20°.贴井壁测量时,纵向分辨率不受泥浆和围岩电阻率的影响,能够准确测量井周方位电阻率,较不贴井壁测量具有很大优势,同时利用12条方位电阻率曲线能够反映出水平井泥浆非对称侵入特性,倾斜地层倾角和倾斜方向. 相似文献
10.
新世纪第一个五年测井技术的若干进展 总被引：14，自引：7，他引：7
新世纪测井技术迅速发展,为油气勘探与开发提供了多种技术手段和丰富的地层信息．本文对新世纪第一个五年测井技术的进展进行评述,重点分析电缆测井、随钻测井、地层测试等井筒探测技术的发展状况,介绍了一些最新的测井仪器．另外,对存储测井、井下永久传感器、取芯随测等刚刚推出的测井新技术也进行了介绍。 相似文献
11.
随钻单极源声波测井中,由于钻铤模式波的干扰而使地层纵波速度的测量变得困难.孔隙地层的声电转换物理效应给我们提供了通过测量转换电信号实现声学参数测量的可能性.针对随钻声电测井,采用Pride声电耦合方程组描述井外孔隙地层的声电耦合波场,考虑随钻环境条件下的边界条件,采用实轴积分法计算出了随钻声电测井瞬态响应的波场.计算结果表明,声电转换比与电缆声电测井量级相同,也说明随钻环境下声电效应是可应用的.但是,从得到的电场波形图中可以观察到,钻铤模式波成分虽有压制,但仍然存在.为了削弱钻铤模式波,鉴于钻铤的声波速度已知,我们尝试利用双发射源测井方法,通过控制源间距及合适的发射延迟时间对钻铤模式波进行进一步压制.结果表明,采用双源后的井内转换声场和电场波形中,钻铤模式波被有效地抑制,残余钻铤波的相对振幅明显减小,压制效果在电场波形中尤为明显,地层波的信噪比显著增强,有利于地层纵波速度的提取. 相似文献
12.
Sofia Davydycheva 《Geophysical Prospecting》2011,59(2):323-340
I study the responses of two different triaxial induction tools to invaded dipping anisotropic formations. I show that the triaxial measurements have generally higher sensitivity to the radial invasion profile, compared to the conventional induction measurements. This enables accurate interpretation of both the anisotropic formation properties and the invasion parameters. Multi‐spacing and single‐spacing multi‐frequency triaxial induction tools can both be used for this purpose. Failure to take the invasion properties into account may lead to misinterpretation of the vertical formation resistivity. Symmetrization of the apparent conductivity matrix opens ways for a visual interpretation of triaxial induction logs for the formation and the invasion zone properties. This technique enables simpler and faster inversion algorithms. I study how the effect of a conductive annulus forming around the invasion zone couples with effects of the dipping anisotropy and the dipping boundaries and show when these effects are additive. Thus, a visual detection of log parts affected by a conductive annulus becomes possible. The key tool for interpretation in complex 3D scenarios is efficient modelling software. I use a 3D finite‐difference modelling approach to simulate responses of induction logging tools of the new generation. Its high efficiency enables simultaneous multi‐spacing and multi‐frequency computing of the tool responses to arbitrary 3D anisotropic formations that made the study possible. 相似文献
13.
14.
15.
In this paper, we propose a hybrid PML (H-PML) combining the normal absorption factor of convolutional PML (C-PML) with tangential absorption factor of Mutiaxial PML (M-PML). The H-PML boundary conditions can better suppress the numerical instability in some extreme models. and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finiteelement method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling (LWD), in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging. 相似文献
16.
Multidimensional Investigation of Bedrock Heterogeneity/Unconformities at a DNAPL‐Impacted Site 
下载免费PDF全文
下载免费PDF全文 Organic solvent (i.e., dense nonaqueous phase liquid, DNAPL) migration in the subsurface is known to be extremely sensitive to geologic heterogeneity. There is often a focus on heterogeneity that results from changing depositional conditions over short spatial scales. Similar or even more extreme spatial heterogeneity can result postdeposition due to erosional processes. This study applies a synergistic approach based on a combination of high‐resolution lithologic logs of continuous cores, borehole geophysical logs, surface electrical resistivity, and seismic refraction tomography models to assess spatial heterogeneity in a shallow bedrock sequence subject to multiple unconformities and contaminated with a mixture of organic chemicals. The persistence of DNAPL in the source zone and an associated dissolved‐phase plume led to variable impacts on formation resistivity across the study site. Seismic refraction in combination with electrical resistivity tomography improved interpretation of highly irregular erosional boundaries by delineating sharp lateral transitions in lithologic composition near the source zone and across the dissolved‐phase plume. Electrical resistivity was effective at differentiating between clean and mud‐rich sandstones and their unconformable contact with an underlying dolostone. Geophysical measurements revealed eroded dolostone mounds encased by a network of younger mud‐rich sandstones channelized by clean semi‐lithified sand, all of which was buried beneath variable glacial drift. Our synergistic multidimensional approach resulted in the development of a detailed three‐dimensional shallow bedrock geospatial model, which has led to an improved understanding of DNAPL migration and contaminant plume heterogeneity. 相似文献
17.
本文给出一种双感应资料快速近似迭代反演技术. 首先建立Fréchet导数的快速算法，保证在反演过程中能够同时获得测井响应相对于地层电阻率和层界面的偏导数，并给出用规范化处理与奇异值分解技术进行迭代反演的具体过程. 为了对理论模拟和井场实际资料进行反演，利用综合分层技术从双感应曲线中提取层界面初始位置和地层电阻率初值，通过单独迭代反演中感应资料，修改层界面和地层电阻率实现中感应资料的最佳拟合，得到探测深度相对较浅的地层电阻率，然后固定层界面位置，再迭代反演深感应资料，得到另一组探测深度相对较深的地层电阻率. 理论和实际资料处理结果证明，两个不同探测深度的电阻率反演结果的相对大小能够准确地反映地层真实的侵入特征.此外，由于深感应仪器具有较深的探测深度，不论在高侵或低侵地层上，深感应反演结果与地层原状电阻率的差异大大小于视电阻率的差异，所以利用反演结果也能得到更好的地层原状电阻率的估计值. 相似文献
18.
The porosity may be overestimated or underestimated when calculated from conventional logs and also underestimated when derived
from nuclear magnetic resonance (NMR) logs due to the effect of the lower hydrogen index of natural gas in gas-bearing sandstones.
Proceeding from the basic principle of NMR log and the results obtained from a physical rock volume model constructed on the
basis of interval transit time logs, a technique of calculating porosity by combining the NMR log with the conventional interval
transit time log is proposed. For wells with the NMR log acquired from the MRIL-C tool, this technique is reliable for evaluating
the effect of natural gas and obtaining accurate porosity in any borehole. In wells with NMR log acquired from the CMR-Plus
tool and with collapsed borehole, the NMR porosity should be first corrected by using the deep lateral resistivity log. Two
field examples of tight gas sandstones in the Xujiahe Formation, central Sichuan basin, Southwest China, illustrate that the
porosity calculated by using this technique matches the core analyzed results very well. Another field example of conventional
gas-bearing reservoir in the Ziniquanzi Formation, southern Junggar basin, Northwest China, verifies that this technique is
usable not only in tight gas sandstones, but also in any gas-bearing reservoirs. 相似文献
19.
电缆地层测试器是重要的地层评价仪器,可以测量地层压力和渗透率、识别流体类型、确定油水界面.然而在低孔低渗地层中,由于泥饼的封闭性差而造成的地层增压现象,致使无法测量到地层真实压力.同时由于长时间的测试,容易将仪器卡在地层中而造成事故.本文提出一种确定电缆地层测试最小测试时间的方法.利用有限元方法计算泥饼和原状地层中的压力分布情况,求取泥浆柱静压力的影响半径,继而确定储层的最小测试时间,并且针对渗透性不同的储层给出了最小测试时间的范围.电缆地层测试最小测试时间的确定,可以确保电缆地层测试器在低孔低渗储层中测量到地层的真实信息,减小由于测量时间过长而引起工程事故发生率. 相似文献
20.
为了克服克拉地区膏盐地层垮塌及地层压力对钻井的影响,在钻井过程中往往采用高矿化度、大密度的钻井液.这使得渗透性地层中观测得到电阻率与实际的电阻率存在较大的偏差,给测井解释带来极大的困难.本文针对克拉地区的实际情况,对高矿化度泥浆影响下的电阻率校正方法进行了探索性研究,提出了基于岩心资料的电阻率校正方法及基于泥浆动态侵入的图版校正电阻率方法,最后通过毛管分析饱和度与校正后电阻率计算饱和度对比验证校正电阻率的可信性.结果表明,校正后电阻率更能真实的反映地层电性特征,进一步提高了测井解释符合率. 相似文献