首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 625 毫秒
1.
The models suggested for the oceanic lithosphere which best predict oceanic heat flow and depth profiles are the constant thickness model and a model in which the lithosphere thickens away from the ridge with a heat source at its base. The latter is considered to be more physically realistic. Such a model, constrained by the observed oceanic heat flow and depth profiles and a temperature at the ridge crest of between 1100°C and 1300°C, requires a heat source at the base of the lithosphere of between 0.5 and 0.9 h.f.u., thermal conductivities for the mantle between 0.005 and 0.0095 cal cm−1 °C−1 s−1 and a coefficient of thermal expansion at 840°C between 4.1 × 10−5 and 5.1 × 10−5 °C−1. Plate creation and subduction are calculated to dissipate about 45% of the total earth heat loss for this model. The efficiency of this mechanism of heat loss is shown to be strongly dependent on the magnitude of the basal heat source. A relation is derived for total earth heat loss as a function of the rate of plate creation and the amount of heat transported to the base of plates. The estimated heat transport to the base of the oceanic lithosphere is similar to estimates of mantle heat flow into the base of the continental lithosphere. If this relation existed in the past and if metamorphic conditions in late Archaean high-grade terrains can be used to provide a maximum constraint on equilibrium Archaean continental thermal gradients, heat flow into the base of the lithosphere in the late Archaean must have been less than about 1.2–1.5 h.f.u. The relation between earth heat loss, the rate of plate creation and the rate of heat transport to the base of the lithosphere suggests that a significant proportion of the heat loss in the Archaean must have taken place by the processes of plate creation and subduction. The Archaean plate processes may have involved much more rapid production of plates only slightly thinner than at present.  相似文献   

2.
We have developed a generic dynamic model of extension of the lithosphere, which predicts major element composition and volume of melt generated from initial extension to steady state seafloor spreading. Stokes equations for non-Newtonian flow are solved and the mantle melts by decompression. Strengthening of the mantle due to dehydration as melting progresses is included. The composition is then empirically related to depletion. Using a crystallisation algorithm, the predicted primary melt composition was compared with mean North Atlantic mid-ocean ridge basalt (MORB). At steady state, using half spreading rates from 10 to 20 mm yr− 1 and mantle potential temperatures of 1300 to 1325 °C we predict a major element composition that is within the variation in the mean of North Atlantic MORB.

This model is applied to the Southeast Greenland margin, which has extensive coverage of seismic and ODP core data. These data have been interpreted to indicate an initial pulse of magmatism on rifting that rapidly decayed to leave oceanic crustal thickness of 8 to 11 km. This pattern of melt production can be recreated by introducing an initial hot layer of asthenosphere beneath the continental lithosphere and by having a period of fast spreading during early opening. The hot layer was convected through the melt region giving a pulse of high magnesian and low silica melt during the early rifting process. The predicted major element composition of primary melts generated are in close agreement with primary melts from the Southeast Greenland margin. The observed variations in major element composition are reproduced without a mantle source composition anomaly.  相似文献   


3.
目前存在有多种地幔热导率模型,不同模型在数值和随温压变化的特征上有明显的差异.为探究不同热导率模型对动力学数值模拟结果的影响,本文对不同模型下的岩石圈张裂过程进行模拟研究,探讨地幔热导率对岩石圈热传输、变形和熔融过程的影响及其作用机理.结果显示,不同热导率模型下,岩石圈的变形和熔融特征表现出明显差异.高热导率模型下,岩石圈破裂较晚,形成陆缘较为宽阔,地壳熔融强烈而地幔熔融较弱;低热导率模型下,岩石圈破裂较早,形成陆缘较为狭窄,地幔熔融强烈而地壳熔融较弱.这种差异源于不同地幔热导率下岩石圈和地幔热状态的变化及相应力学性质的改变.高热导率下,热传导的增温效应显著,岩石圈呈现较热的状态,其强度整体较低,壳幔耦合减弱;而低热导率下,热对流的增温效应显著,岩石圈呈较冷的状态,其强度整体较高,壳幔耦合增强.基于模拟结果,本文认为地幔热导率的选取对动力学模拟的结果有着较为显著的影响,相对于随温压的变化,热导率数值的差异对动力学数值模拟的结果影响更大,尤其是对于地幔熔融过程的影响.  相似文献   

4.
We present new and reprocessed seismic reflection data from the area where the southeast and southwest Greenland margins intersected to form a triple junction south of Greenland in the early Tertiary. During breakup at 56 Ma, thick igneous crust was accreted along the entire 1300-km-long southeast Greenland margin from the Greenland Iceland Ridge to, and possibly 100 km beyond, the triple junction into the Labrador Sea. However, highly extended and thin crust 250 km to the west of the triple junction suggests that magmatically starved crustal formation occurred on the southwest Greenland margin at the same time. Thus, a transition from a volcanic to a non-volcanic margin over only 100–200 km is observed. Magmatism related to the impact of the Iceland plume below the North Atlantic around 61 Ma is known from central-west and southeast Greenland. The new seismic data also suggest the presence of a small volcanic plateau of similar age close to the triple junction. The extent of initial plume-related volcanism inferred from these observations is explained by a model of lateral flow of plume material that is guided by relief at the base of the lithosphere. Plume mantle is channelled to great distances provided that significant melting does not take place. Melting causes cooling and dehydration of the plume mantle. The associated viscosity increase acts against lateral flow and restricts plume material to its point of entry into an actively spreading rift. We further suggest that thick Archaean lithosphere blocked direct flow of plume material into the magma-starved southwest Greenland margin while the plume was free to flow into the central west and east Greenland margins. The model is consistent with a plume layer that is only moderately hotter, 100–200°C, than ambient mantle temperature, and has a thickness comparable to lithospheric thickness variations, 50–100 km. Lithospheric architecture, the timing of continental rifting and viscosity changes due to melting of the plume material are therefore critical parameters for understanding the distribution of magmatism.  相似文献   

5.
超高压变质研究涉及的一个基本力学问题是为什么低密度的大陆地壳岩石能克服浮力俯冲到高密度地幔100多公里的深度.本文的三维有限单元法计算表明:俯冲海洋板块可以拖曳侧面相邻宽度不超过150km的一窄条大陆板块,俯冲到超高压变质深度,形成少见的大规模超高压变质带.十几公里乃至几十公里尺度的陆壳块体,可能被俯冲地幔裹挟至超高压变质深度,在造山带内形成零星出露的超高压变质岩.成熟的陆-陆碰撞带则不可能使陆壳俯冲到超高压变质深度.  相似文献   

6.
The results of the selection of a model of the deep density distribution in the lithosphere of Central and Southern Asia, which explains the previously revealed dependence of the free mantle surface depth on the thickness of the crust [Artemjev, 1975], are described. It is shown that this dependence can be caused by variations in the mantle’s density with depth. Models of the continental and oceanic mantles with an increase in the linear density over depth are selected for the region of Asia. The level of the free surface depth in the oceanic mantle is higher than in the continental mantle. The observed dependence on the crustal thickness can also be used for determining nonlinear density variations with depth under the assumption that lateral density variations in this dependence are of a random character.  相似文献   

7.
The southernmost Mariana forearc stretched to accommodate opening of the Mariana Trough backarc basin in late Neogene time, erupting basalts at 3.7–2.7 Ma that are now exposed in the Southeast Mariana Forearc Rift (SEMFR). Today, SEMFR is a broad zone of extension that formed on hydrated, forearc lithosphere and overlies the shallow subducting slab (slab depth ≤ 30–50 km). It comprises NW–SE trending subparallel deeps, 3–16 km wide, that can be traced ≥ ∼30 km from the trench almost to the backarc spreading center, the Malaguana‐Gadao Ridge (MGR). While forearcs are usually underlain by serpentinized harzburgites too cold to melt, SEMFR crust is mostly composed of Pliocene, low‐K basaltic to basaltic andesite lavas that are compositionally similar to arc lavas and backarc basin (BAB) lavas, and thus defines a forearc region that recently witnessed abundant igneous activity in the form of seafloor spreading. SEMFR igneous rocks have low Na8, Ti8, and Fe8, consistent with extensive melting, at ∼23 ± 6.6 km depth and 1239 ± 40°C, by adiabatic decompression of depleted asthenospheric mantle metasomatized by slab‐derived fluids. Stretching of pre‐existing forearc lithosphere allowed BAB‐like mantle to flow along the SEMFR and melt, forming new oceanic crust. Melts interacted with pre‐existing forearc lithosphere during ascent. The SEMFR is no longer magmatically active and post‐magmatic tectonic activity dominates the rift.  相似文献   

8.
This paper provides new constraints on the crystallization conditions of the 3.49 Ga Barberton komatiites. The compositional evidence from igneous pyroxene in the olivine spinifex komatiite units indicates that the magma contained significant quantities of dissolved H2O. Estimates are made from comparisons of the compositions of pyroxene preserved in Barberton komatiites with pyroxene produced in laboratory experiments at 0.1 MPa (1 bar) under anhydrous conditions and at 100 and 200 MPa (1 and 2 kbar) under H2O-saturated conditions on an analog Barberton composition. Pyroxene thermobarometry on high-Ca clinopyroxene compositions from ten samples requires a range of minimum magmatic water contents of 6 wt.% or greater at the time of pyroxene crystallization and minimum emplacement pressures of 190 MPa (6 km depth). Since high-Ca pyroxene appears after 30% crystallization of olivine and spinel, the liquidus H2O contents could be 4 to 6 wt.% H2O. The liquidus temperature of the Barberton komatiite composition studied is between 1370 and 1400°C at 200 MPa under H2O-saturated conditions. When compared to the temperature-depth regime of modern melt generation environments, the komatiite mantle source temperatures are 200°C higher than the hydrous mantle melting temperatures inferred in modern subduction zone environments and 100°C higher than mean mantle melting temperatures estimated at mid-ocean ridges. When compared to previous estimates of komatiite liquidus temperatures, melting under hydrous conditions occurs at temperatures that are 250°C lower than previous estimates for anhydrous komatiite. Mantle melting by near-fractional, adiabatic decompression takes place in a melting column that spans 38 km depth range under hydrous conditions. This depth interval for melting is only slightly greater than that observed in modern mid-ocean ridge environments. In contrast, anhydrous fractional melting models of komatiite occur over a larger depth range ( 130 km) and place the base of the melting column into the transition zone.  相似文献   

9.
Electromagnetic Studies Of The Lithosphere And Asthenosphere   总被引：3，自引：0，他引：3  
In geodynamic models of the Earth's interior, the lithosphere and asthenosphere are defined in terms of their rheology. Lithosphere has high viscosity, and can be divided into an elastic region at temperatures below 350 °C and an anelastic region above 650 °C. Beneath the lithosphere lies the ductile asthenosphere, with one- to two-orders of magnitude lower viscosity. Asthenosphere represents the location in the mantle where the melting point (solidus) is most closely approached, and sometimes intersected. Seismic, gravity and isostatic observations provide constraints on lithosphere-asthenosphere structure in terms of shear-rigidity, density and viscosity, which are all rheological properties. In particular, seismic shear- and surface-wave analyses produce estimates of a low-velocity zone (LVZ) asthenosphere at depths comparable to the predicted rheological transitions. Heat flow measurements on the ocean floor also provide a measure of the thermal structure of the lithosphere.Electromagnetic (EM) observations provide complementary information on lithosphere-asthenosphere structure in terms of electrical conductivity. Laboratory studies of mantle minerals show that EM observations are very sensitive to the presence of melt or volatiles. A high conductivity zone (HCZ) in the upper mantle therefore represents an electrical asthenosphere (containing melt and/or volatile) that may be distinct from a rheological asthenosphere and the LVZ. Additionally, the vector propagation of EM fields in the Earth provides information on anisotropic conduction in the lithosphere and asthenosphere. In the last decade, numerous EM studies have focussed on the delineation of an HCZ in the upper mantle, and the determination of melt/volatile fractions and the dynamics of the lithosphere-asthenosphere. Such HCZs have been imaged under a variety of tectonic zones, including mid-ocean ridges and continental rifts, but Archaean shields show little evidence of an HCZ, implying that the geotherm is always below the mantle solidus. Anisotropy in the conductivity of oceanic and continental lithosphere has also been detected, but it is not clear if the HCZ is also anisotropic. Although much progress has been made, these results have raised new and interesting questions of asthenosphere melt/volatiles porosity and permeability, and lithosphere-upper mantle heterogeneity. It is likely that in the next decade EM will continue to make a significant contribution to our understanding of plate tectonic processes.  相似文献   

10.
Both early and late Archean rocks from greenstone belts and felsic gneiss complexes exhibit positive εNd values of +1 to +5 by 3.5 Ga, demonstrating that a depleted mantle reservoir existed very early. The amount of preserved pre-3.0 Ga continental crust cannot explain such high ε values in the depleted residue unless the volume of residual mantle was very small: a layer less than 70 km thick by 3.0 Ga. Repeated and exclusive sampling of such a thin layer, especially in forming the felsic gneiss complexes, is implausible. Extraction of enough continental crust to deplete the early mantle and its destructive recycling before 3.0 Ga ago requires another implausibility, that the sites of crustal generation and of recycling were substantially distinct. In contrast, formation of mafic or ultramafic crust analogous to present-day oceanic crust was continuous from very early times. Recycled subducted oceanic lithosphere is a likely contributor to present-day hotspot magmas, and forms a reservoir at least comparable in volume to continental crust. Subduction of an early mafic/ultramafic “oceanic” crust and temporary storage rather than immediate mixing back into undifferentiated mantle may be responsible for the depletion and high εNd values of the Archean upper mantle. Using oceanic crustal production proportional to heat productivity, we show that temporary storage in the mantle of that crust, whether basaltic as formed by 5–20% partial melting, or partly komatiitic and formed by higher extents of melting is sufficient to balance an early depleted mantle of significant volume with εNd at least +3.0.  相似文献   

11.
The existence of Archaean komatiites with eruption temperatures greater than 1650°C requires that the mantle be vertically differentiated by the time of komatiite eruption. If in the unlikely event that undifferentiated mantle had survived primordial planetary differentiation and had been hot enough to deliver 1650°C komatiite, it would have been extensively molten to depths of ～250 km, resulting in rapid, profound, vertical differentiation anyway. During primordial differentiation (or Archaean komatiite petrogenesis) the high density and compressibility of ultrabasic melt allowed storage of a global melt layer beneath a buoyant residue of dunite and/or harzburgite. This refractory cap segregated by extraction of melt both upwards and downwards from the depth at which the density contrast between crystals and liquid vanishes. Eruption of komatiite from the melt layer by corrosion of the cap was the Archaean earth's principal means of dissipating excess heat. This subterranean magma ocean precluded vertical homogenization of the Archaean mantle by convection but effectively absorbed lateral mantle heterogeneities and imposed the relative uniformity of maximum eruption temperature and MgO contents (～32%) seen in primitive Archaean komatiites on all continents.Verification of the postulated density relations of liquids and crystals to 100 kbar becomes a pressing concern in view of the expected consequences these relations may have had.  相似文献   

12.
A model is proposed for the origin of hot spots that depends on the existence of major-element heterogeneities in the mantle. Generation of basaltic crust at spreading centers produces a layer of residual peridotite ～20–25 km thick directly beneath the crust which is depleted in Fe/Mg, TiO2, CaO, Al2O3, Na2O and K2O, and which has a slightly lower density than undepleted peridotite beneath it. Upon recycling of this depleted peridotite back into the deep mantle at subduction zones, it becomes gravitationally unstable, and tends to rise as diapirs through undepleted peridotite. For a density contrast of 0.05 g cm?3, a diapir 60 km in diameter would rise at roughly 8 cm y?1, and could transport enough heat to the base of the lithosphere to cause melting and volcanism at the surface. Hot spots are thus viewed as a passive consequence of mantle convection and fractionation at spreading centers rather than a plate-driving force.It is suggested that depleted diapirs exist with varying amounts of depletion, diameters, upward velocities and source volumes. Such variations could explain the occurrence of hot spots with widely varying lifetimes and rates of lava production. For highly depleted diapirs with very low Fe/Mg, the diapir would act as a heat source and the asthenosphere and lower lithosphere drifting across the diapir would serve as the source region of magmas erupted at the surface. For mildly depleted diapirs with Fe/Mg only slightly less than in normal undepleted mantle, the diapir could provide not only the source of heat but also most or all of the source material for the erupted magmas. The model is consistent with isotopic data that require two separate and ancient source regions for mid-ocean ridge and oceanic island basalts. The source for mid-ocean ridge basalts is considered to be material upwelling at spreading centers from the deep mantle. This material forms the oceanic lithosphere. Oceanic island basalts are considered to be derived from varying mixtures of sublithospheric and lower lithospheric material and the rising diapir itself.  相似文献   

13.
In a general lithospheric model of a simple divergent ocean and continental margin that satisfies the constraints of isostasy and gravity anomalies, the free-air gravity anomaly at the margin is modelled by an oceanic crust that thickens exponentially toward the margin from its common value of 6.4 km about 600 km from the margin to 17.7 km at the margin; this postulated thickening is supported empirically by seismic refraction measurements made near continental margins. The thickness of the oceanic crust matches that of the continental lithosphere at breakup, as observed today in Afar and East Africa, and is interpreted as the initial oceanic surface layer chilled against the continental lithosphere. With continued plate accretion, the chilled oceanic crust thins exponentially to a steadystate thickness, which is achieved about 40 m.y. after breakup. These findings contrast with the generally held view that the oceanic crust has a uniform thickness.During the first 40 m.y. of spreading, the thicker oceanic crust, of density 2.86 g/cm3, displaces the denser (3.32 g/cm3) subjacent material; by isostasy, the spreading ridge and the rest of the seafloor thus stand higher in younger( <40m.y.) oceans than they do in older(>40m.y.) oceans. This is postulated to be the cause of the empirical relationship between the crestal depth of spreading ridges and the age (or half-width) of ocean basins.  相似文献   

14.
几乎所有大陆岩石层的减薄现象,可能都与海洋板块的俯冲作用相关,但是两者之间的内在联系迄今仍不十分明确,为此,我们设计了一系列包含洋-陆俯冲系统的二维数值模型,来探讨海洋板块的俯冲作用对上覆大陆岩石层变形行为的影响,尤其对大陆岩石层减薄效应的制约.模型结果表明,海洋板块俯冲过程中的地幔楔熔体对大陆岩石层地幔的热侵蚀以及由熔体上升所诱发的地幔局部对流的强烈扰动会导致上覆大陆岩石层的减薄效应.这种效应不仅表现在横向上的向陆内蔓延,还表现在垂向上的向浅部发展.且多类动力学参数都能制约大陆岩石层的减薄效应.具体地,随着汇聚速率和洋壳厚度的增加,上覆大陆岩石层在横向上的减薄范围越大,在垂向上的减薄程度也越深;而随着俯冲海洋板块年龄的增加,上覆大陆岩石层在横向上的减薄范围增大,但在垂向上的减薄程度会减小;随着上覆大陆岩石层厚度的增加,其横向减薄范围会减小,但在垂向上的减薄程度会加深.本文研究成果能为揭示华北克拉通减薄/破坏的动力学过程提供一定的理论参考依据.  相似文献   

15.
地幔柱是最可能形成大火成岩省的原因之一,同时地幔柱与岩石圈的相互作用也极大的影响着岩石圈的构造演化.本文主要集中研究地幔柱与岩石圈相互作用过程中熔融相关的问题.利用开源程序Ellipsis3D,基于质量守恒方程、动量守恒方程、能量守恒方程和岩石流变本构关系,以及不同的熔融损耗关系,通过有限元数值方法模拟得到地幔柱与岩石圈相互作用过程中熔融程度的动态变化.数值模拟结果显示,地幔柱与岩石圈相互作用的熔融相关过程分为三个阶段：地幔柱的初融阶段,地幔柱自身熔融占主导,减压熔融为主因;地幔柱与岩石圈的纵向作用阶段,岩石圈地幔开始熔融,地幔柱以减压熔融为主,岩石圈地幔以升温熔融为主;地幔柱的横向展平阶段,随着地幔柱的扩展岩石圈地幔熔融范围增加,以升温熔融为主,地幔柱自身熔融程度减小.最后基于数值模拟结果及现场资料对峨嵋山大火成岩省地幔柱的发展演化以及峨眉山大火成岩省的形成进行了讨论.  相似文献   

16.
Nishinoshima, a submarine volcano in the Ogasawara Arc, approximately 1 000 km south of Tokyo, Japan, suddenly erupted in November 2013, after 40 years of dormancy. Olivine‐bearing phenocryst‐poor andesites found in older submarine lavas from the flanks of the volcano have been used to develop a model for the genesis of andesitic lavas from Nishinoshima. In this model, primary andesite magmas originate directly from the mantle as a result of shallow and hydrous melting of plagioclase peridotites. Thus, it only operates beneath Nishinoshima and submarine volcanoes in the Ogasawara Arc and other oceanic arcs, where the crust is thin. The primary magma compositions have changed from basalt, produced at considerable depth, to andesite, produced beneath the existing thinner crust at this location in the arc. This reflects the thermal and mechanical evolution of the mantle wedge and the overlying lithosphere. It is suggested that continental crust‐like andesitic magma builds up beneath submarine volcanoes on thin arc lithosphere today, and has built up beneath such volcanoes in the past. Andesites produced by this shallow and hydrous melting of the mantle could accumulate through collisions of plates to generate continental crust.  相似文献   

17.
Cratons form the cores of continents and were formed within a narrow window of time (2.5–3.2 Gy ago), the majority having remained stable ever since. Petrologic evidence suggests that the thick mantle roots underlying cratons were built by underthrusting of oceanic and arc lithosphere, but paradoxically this requires that the building blocks of cratons are weak even though cratons must have been strong subsequent to formation. Here, we propose that one form of thickening could be facilitated by thrusting of oceanic lithospheres along weak shear zones, generated in the serpentinized upper part of the oceanic lithosphere (crust + mantle) due to hydrothermal interaction with seawater. Conductive heating of the shear zones eventually causes serpentine breakdown at ~ 600 °C, shutting down the shear zone and culminating in craton formation. However, if shear zones are too thin, serpentine breakdown and healing of the shear zone occurs too soon and underthrusting does not occur. If shear zones are too thick, serpentine breakdown takes too long so healing and lithospheric thickening is not favored. Shear zone thicknesses of ~ 18 km are found to be favorable for craton formation. Because the maximal depth of seawater-induced serpentinization into the lithosphere is limited by the depth of the isotherm for serpentine breakdown, shear zone thicknesses should have increased with time as the Earth's heat flux and depth to the serpentine breakdown isotherm decreased and increased, respectively, with time. We thus suggest that the greater representation of cratons in the late Archean might not necessarily be explained by preferential recycling in the early Archean but may simply reflect preferential craton formation in the late Archean. That is, our model predicts that the early Archean was too hot, the Phanerozoic too cold, and the late Archean just right for making cratons.  相似文献   

18.
The island of Crete is located in the forearc of the Hellenic subduction zone, where the African lithospheric plate is subducting beneath the Eurasian one. The depth of the plate contact as well as the internal structure of the Aegean plate in the area of Crete have been a matter of debate. In this study, seismic constrains obtained by wide-angle seismic, receiver function and surface wave studies are discussed and compared to a 3D density model of the region.The interface between the Aegean continental lithosphere and the African one is located at a depth of about 50 km below Crete. According to seismic studies, the Aegean lithosphere in the area of Crete is characterised by strong lateral, arc–parallel heterogeneity. An about 30 km thick Aegean crust is found in central Crete with a density of about 2850 kg/m3 for the lower Aegean continental crust and a density of about 3300 kg/m3 for the mantle wedge between the Aegean crust and the African lithosphere. For the deeper crust in the area of western Crete two alternative models have been proposed by seismic studies. One with an about 35 km thick crust and another one with crustal velocities down to the plate contact. A grid search is performed to test the consistency of these models with gravimetric constraints. For western Crete a model with a thick lower Aegean crust and a density of about 2950 kg/m3 is favoured. The inferred density of the lower Aegean crust in the area of Crete correlates well with S-wave velocities obtained by surface wave studies.Based on the 3D density model, the weight of the Aegean lithosphere is estimated along an E–W oriented profile in the area of Crete. Low weights are found for the region of western Crete.  相似文献   

19.
The application of the Sr/Ca-Ba/Ca systematics to volcanic rocks of the Andean Southern Volcanic Zone (33°S–46°S) has revealed a good correlation between the estimated degree of partial melting required to generate primary magmas and the projected extensions of the oceanic Nazca plate fracture zones under the continental South American plate. Magmas erupted at volcanic centers situated above these projections are thought to have been derived from primary magmas generated by relatively high degrees of melting, whereas those erupted at other centers are thought to have evolved from magmas produced by comparatively low degree of fusion. We interpret this relationship to reflect the facilitation of heat and mass transfer from the asthenosphere below the subducted oceanic lithosphere to the subarc mantle by the fracture zones. This contribution enhances the degree of melting of the subarc mantle source as well as the fraction of material derived from the subducted oceanic crust. This model predicts the predominance of basalts depleted in incompatible trace elements in centers located above the Nazca plate fracture zone extensions and of basalts enriched in incompatible trace elements in centers situated between boundaries of fracture extensions.  相似文献   

20.
The average chemical compositions of the continental crust and the oceanic crust (represented by MORB), normalized to primitive mantle values and plotted as functions of the apparent bulk partition coefficient of each element, form surprisingly simple, complementary concentration patterns. In the continental crust, the maximum concentrations are on the order of 50 to 100 times the primitive-mantle values, and these are attained by the most highly incompatible elements Cs, Rb, Ba, and Th. In the average oceanic crust, the maximum concentrations are only about 10 times the primitive mantle values, and they are attained by the moderately incompatible elements Na, Ti, Zr, Hf, Y and the intermediate to heavy REE.This relationship is explained by a simple, two-stage model of extracting first continental and then oceanic crust from the initially primitive mantle. This model reproduces the characteristic concentration maximum in MORB. It yields quantitative constraints about the effective aggregate melt fractions extracted during both stages. These amount to about 1.5% for the continental crust and about 8–10% for the oceanic crust.The comparatively low degrees of melting inferred for average MORB are consistent with the correlation of Na2O concentration with depth of extrusion [1], and with the normalized concentrations of Ca, Sc, and Al ( 3) in MORB, which are much lower than those of Zr, Hf, and the HREE ( 10). Ca, Al and Sc are compatible with clinopyroxene and are preferentially retained in the residual mantle by this mineral. This is possible only if the aggregate melt fraction is low enough for the clinopyroxene not to be consumed.A sequence of increasing compatibility of lithophile elements may be defined in two independent ways: (1) the order of decreasing normalized concentrations in the continental crust; or (2) by concentration correlations in oceanic basalts. The results are surprisingly similar except for Nb, Ta, and Pb, which yield inconsistent bulk partition coefficients as well as anomalous concentrations and standard deviations.The anomalies can be explained if Nb and Ta have relatively large partition coefficients during continental crust production and smaller coefficients during oceanic crust production. In contrast, Pb has a very small coefficient during continental crust production and a larger coefficient during oceanic crust production. This is the reason why these elements are useful in geochemical discrimination diagrams for distinguishing MORB and OIB on the one hand from island arc and most intracontinental volcanics on the other.The results are consistent with the crust-mantle differentiation model proposed previously [2]. Nb and Ta are preferentially retained and enriched in the residual mantle during formation of continental crust. After separation of the bulk of the continental crust, the residual portion of the mantle was rehomogenized, and the present-day internal heterogeneities between MORB and OIB sources were generated subsequently by processes involving only oceanic crust and mantle. During this second stage, Nb and Ta are highly incompatible, and their abundances are anomalously high in both OIB and MORB.The anomalous behavior of Pb causes the so-called “lead paradox”, namely the elevated U/Pb and Th/Pb ratios (inferred from Pb isotopes) in the present-day, depleted mantle, even though U and Th are more incompatible than Pb in oceanic basalts. This is explained if Pb is in fact more incompatible than U and Th during formation of the continental crust, and less incompatible than U and Th during formation of oceanic crust.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号