首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 281 毫秒
1.
Marble, calc-silicate rock, quartzite and mica schist of Precambrian age in the ‘main Raialo syncline’ in the Udaipur district of central Rajasthan, India, have been affected by folding of four main generations (F1–F4), the first two of which are seen in the scale of map to microsection. The very tight to isoclinal F1 folds with long limbs and thickened hinges are generally reclined or inclined, and plunge gently castward or westward where least reoriented. The axial planes of the F1 folds have been involved in upright warps on east-west axes (F1′), nearly coaxial with the F1 folds, in some sectors. These folds have been overprinted by upright F2 folding of varying tightness with the axial planes striking north to northeast, resulting in interference patterns of different types in all scales. A penetrative axial plane foliation related to F1 folding and a crenulation cleavage parallel to the F2 axial pianes are seen in the micaceous rocks. Two sets of conjugate folds and kink bands of smail scale have been superimposed on the F1–F2 folds in thinly foliated rocks. The first of these sets (F3) has its conjugate axial planes dipping gently northeast and southwest, whereas the paired axial planes of the later set (F4) are vertical with north-northwest and east-west strikes.  相似文献   

2.
The supracrustal enclave within the Peninsular Gneiss in the Honakere arm of the Chitradurga-Karighatta belt comprises tremolite-chlorite schists within which occur two bands of quartzite coalescing east of Jakkanahalli(12°39′N; 76°41′E), with an amphibolite band in the core. Very tight to isoclinal mesoscopic folds on compositional bands cut across in the hinge zones by an axial planar schistosity, and the nearly orthogonal relation between compositional bands and this schistosity at the termination of the tremolite-chlorite schist band near Javanahalli, points to the presence of a hinge of a large-scale, isoclinal early fold (F1). That the map pattern, with an NNE-plunging upright antiform and a complementary synform of macroscopic scale, traces folds 'er generation (F 2),is proved by the varying attitude of both compositional bands (S0) and axial pranar schistosity (S 1), which are effectively parallel in a major part of the area. A crenulation cleavage (S 2) has developed parallel to the axial planes of theF 2 folds at places. TheF 2 folds range usually from open to rarely isoclinal style, with theF 1 andF 2 axes nearly parallel. Evidence of type 3 fold interference is also provided by the map pattern of a quartzite band in the Borikoppalu area to the north, coupled with younging directions from current bedding andS 0 -S 1 inter-relation. Although statistically theF 1 andF 2 linear structures have the same orientation, detailed studies of outcrops and hand specimens indicate that the two may make as high an angle as 90°. Usually, in these instances, theF 1 lineations are unreliable around theF 2 axes, implying that theF 2 folding was by flexural slip. In zones with very tight to almost isoclinalF 2 folding, however, buckling attendant with flattening has caused a spread of theF 1 lineations almost in a plane. Initial divergence in orientation of theF 1 lineations due to extreme flattening duringF 1 folding has also resulted in a variation in the angle between theF 1 andF 2lineations in some instances. Upright later folding (F3) with nearly E-W strike of axial planes has led to warps on schistosity, plunge reversals of theF 1 andF 2 axes, and increase in the angle between theF 1 andF 2 lineations at some places. Large-scale mapping in the Borikoppalu sector, where the supposed Sargur rocks with ENE ‘trend’ abut against the N-‘trending’ rocks of the Dharwar Supergroup, shows a continuity of rock formations and structures across the hinge of a large-scaleF 2 fold. This observation renders the notion, that there is an angular unconformity here between the rocks of the Sargur Group and the Dharwar Supergroup, untenable.  相似文献   

3.
The rocks of the Delhi Supergroup, which occur around Barr-Sendra and Phulad-Deogarh regions in Central Rajasthan, show three phases of deformational episodes: (i) phase D1—tight-to-long limbed isoclinal fold (F1); phase D2—open, asymmetric fold (F 2) controlling the map pattern of the formational boundaries; and (iii) phase D3—major warps (F3). Interference between nearly coaxial F1 and F2 on northerly axes produced hook-shaped and crescent patterns whereas superimposition of easterly trending F3 on F2 produced dome-and-basin patterns. The thermal peak was achieved during the second phase of deformation when the rocks were constructively metamorphozed and granites (850−750 m.y.), late synkinematic with respect to second phase of deformation, were emplaced. The sequence of deformation and the structural pattern of the rocks of the Delhi Supergroup in Central Rajasthan strikingly resemble those in northeastern Rajasthan. Structurally the characteristics of the Delhi Supergroup as verified in the entire region from NE to Central Rajasthan are: (a) the same sequence of development of folds, F1, F2 and F3, interspersed with nearly identical phases of recrystallization, (b) hook-shaped interference pattern due to near-coaxial refolding of F1 by F2, and (c) variation in axial plunge of F2 resulting in culminations and depressions. Lastly, phases of the recrystallization history indicates little time gap between F1 and F2, and a considerable gap between F2 and F3.  相似文献   

4.
In the Kolar Schist Belt well-preserved small-scale diastrophic structures suggest four phases of folding (F1 — F4). The near coaxial F1 andF 2folds are both isoclinal with long-drawn out limbs and sharp hinges. The axial planes of bothF 1andF 2folds are subvertical with N-S strikes; these control the linear outcrop pattern of the Schist belt. The later folds (F 3and F4) are important in small-to-intermediate scales only and are accommodation structures formed during the relaxation period of the early folding episodes. Mesoscopic shear zones, post-F2 but pre-F3 in age, are present in all the rock types in this area. The F1 and F2 folds and the mesoscopic shear zones were formed during a continuous E-W subhorizontal compression. Available geochemical and isotopic data show that the Kolar Schist Belt with ensimatic setting is bounded by two granitic terrains of contrasting evolutionary histories. This, together with E-W subhorizontal compression over a protracted period of time, strengthens the recent suggestions that the Kolar Schist Belt represents a suture. This belt then marks the site of a continent-continent collision event of late Archaean-early Proterozoic age.  相似文献   

5.
A multiple-deformation sequence is established for different types of gneisses, mafic-paleosomes and banded magnetite quartzites (BMQ) exposed within the area. In gneisses, the basin-shaped map pattern represents the type-i interference structure formed due to the overprinting of F3 folds with ENE striking axial planes on F2 folds with axial planes striking NNW. The BMQ band occurring as an enclave within the gneissic country, represents a large scale F1 fold with relatively smaller scale F2 folds developed on its limbs. Mafic-paleosomes within the streaky-charnockitic-gneisses exhibit structures formed due to the interference of more than two phases of folding (F1,Fla,F2,F3). It is shown that the deformation plan in these rocks is consistent with the generalized deformation scheme for Granite-greenstone belts. The difference in the map pattern of Granite-greenstone belts and Granulite-charnockite terrains is ascribed to the variance in Theological properties, layerthickness ratios and local displacement directions during different phases of folding. These differences apart, both the Granite-greenstone and Granulite-charnockite provinces in South India are deformed by an early isoclinal folding which is successively overprinted by folding on NNW and ENE striking axial planes.  相似文献   

6.
The three-dimensional exposures of the Sierra Blanca marbles and neighbouring rocks in the western Betic cordillera of the south of Spain show tight to isoclinal F3 folds re-folded by a larger sheath-like structure. The relationships between both structures are as follows: (1) The mean axial surface for Sierra Blanca sheath fold can be defined as the great circle of best fit through the ß-axes of sub-cylindrical F3 folding domains. (2) The asymmetric F3-folds indicate a single mainly eastward normal sense of shear. (3) The mean attitude of the axial-plane crenulation foliation, Sc, is also sub-parallel to the mean axial surface for Sierra Blanca sheath fold. The regional context of the Sierra Blanca sheath fold is finally discussed, and a model of a heterogeneous high-strain extensional zone proposed.  相似文献   

7.
The Paleoproterozoic Liaohe assemblage and associated Liaoji granitoids represent the youngest basement in the Eastern Block of the North China Craton. Various structural elements and metamorphic reaction relations indicate that the Liaohe assemblage has experienced three distinct deformational events (D1 to D3) and four episodes of metamorphism (M1 to M4). The earliest greenschist facies event (M1) is recognized in undeformed or weakly deformed domains wrapped by the S1 schistosity, suggesting that M1 occurred before D1. The D1 deformation produced small, mostly meter-scale, isoclinal and recumbent folds (F1), an associated penetrative axial planar schistosity (S1), a mineral stretching lineation (L1) and regional-scale ductile shear zones. Concurrent with D1 was M2 metamorphism, which occurred before D2 and produced low- to medium-pressure amphibolite facies assemblages. Regionally divergent motion senses reflected by the asymmetric F1 folds and other sense-of-shear indicators, together with the radial distribution of the L1 lineation surrounding the Liaoji granitoids, imply that D1 represents an extensional event. The D2 deformation produced open to tight F2 folds of varying scales, S2 axial crenulation cleavages and ENE-NE-striking thrust faults, involving broadly NW–SE compression. Following D2 was M3 metamorphism that led to the formation of sillimanite and cordierite in low-pressure type rocks and kyanite in medium-pressure rocks. The last deformational event (D3) formed NW-WNW-trending folds (F3), axial planar kink bands, spaced cleavages (S3), and strike–slip and thrust faults, which deflect the earlier D1 and D2 structures. D3 occurred at a shallow crustal level and was associated with, or followed by, a greenschist facies retrograde metamorphic event (M4).The Liaohe assemblage and associated Liaoji granitoids are considered to have formed in a Paleoproterozoic rift, the late spreading of which led to the occurrence of the early extensional deformation (D1) and the M1 and M2 metamorphism, and the final closing of which was associated with the D2 and D3 phases of deformation and M3 and M4 metamorphism.  相似文献   

8.
Detailed field-structural mapping of Neoproterozoic basement rocks exposed in the Wadi Yiba area, southern Arabian Shield, Saudi Arabia illustrates an important episode of late Neoproterozoic transpression in the southern part of the Arabian-Nubian Shield (ANS). This area is dominated by five main basement lithologies: gneisses, metavolcanics, Ablah Group (meta-clastic and marble units) and syn- and post-tectonic granitoids. These rocks were affected by three phases of deformation (D1–D3). D1 formed tight to isoclinal and intrafolial folds (F1), penetrative foliation (S1), and mineral lineation (L1), which resulted from early E-W (to ENE-WSW) shortening. D2 deformation overprinted D1 structures and was dominated by transpression and top-to-the-W (?WSW) thrusting as shortening progressed. Stretching lineation trajectories, S-C foliations, asymmetric shear fabrics and related mylonitic foliation, and flat-ramp and duplex geometries further indicate the inferred transport direction. The N- to NNW-orientation of both “in-sequence piggy-back thrusts” and axial planes of minor and major F2 thrust-related overturned folds also indicates the same D2 compressional stress trajectories. The Wadi Yiba Shear Zone (WYSZ) formed during D2 deformation. It is one of several N-S trending brittle-ductile Late Neoproterozoic shear zones in the southern part of the ANS. Shear sense indicators reveal that shearing during D2 regional-scale transpression was dextral and is consistent with the mega-scale sigmoidal patterns recognized on Landsat images. The shearing led to the formation of the WYSZ and consequent F2 shear zone-related folds, as well as other unmappable shear zones in the deformed rocks. Emplacement of the syn-tectonic granitoids is likely to have occurred during D2 transpression and occupied space created during thrust propagation. D1 and D2 structures are locally overprinted by mesoscopic- to macroscopic-scale D3 structures (F3 folds, and L3 crenulation lineations and kink bands). F3 folds are frequently open and have steep to subvertical axial planes and axes that plunge ENE to ESE. This deformation may reflect progressive convergence between East and West Gondwana.  相似文献   

9.
Low-grade metamorphic rocks of Paleozoic–Mesozoic age to the north of Konya, consist of two different groups. The Silurian–Lower Permian Sizma Group is composed of reefal complex metacarbonates at the base, and flyschoid metaclastics at the top. Metaigneous rocks of various compositions occur as dykes, sills, and lava flows within this group. The ?Upper Permian–Mesozoic age Ardicli Group unconformably overlies the Sizma Group and is composed of, from bottom to top, coarse metaclastics, a metaclastic–metacarbonate alternation, a thick sequence of metacarbonate, and alternating units of metachert, metacarbonates and metaclastics. Although pre-Alpine overthrusts can be recognized in the Sizma Group, intense Alpine deformation has overprinted and obliterated earlier structures. Both the Sizma and Ardicli Groups were deformed, and metamorphosed during the Alpine orogeny. Within the study area evidence for four phases of deformation and folding is found. The first phase of deformation resulted in the major Ertugrul Syncline, overturned tight to isoclinal and minor folding, and penetrative axial planar cleavage developed during the Alpine crustal shortening at the peak of metamorphism. Depending on rock type, syntectonic crystallization, rotation, and flattening of grains and pressure solution were the main deformation mechanisms. During the F2-phase, continued crustal shortening produced coaxial Type-3 refolded folds, which can generally be observed in outcrop with associated crenulation cleavage (S2). Refolding of earlier folds by the noncoaxial F3-folding event generated Type-2 interference patterns and the major Meydan Synform which is the largest map-scale structure within the study area. Phase 3 structures also include crenulation cleavage (S3) and conjugate kink folds. Further shortening during phase 4 deformation also resulted in crenulation cleavage and conjugate kink folds. According to thin section observations, phases 2–4 crenulation cleavages are mainly the result of microfolding with pressure solution and mineral growth.  相似文献   

10.
F1 macroscopic folds in the Late Palaeozoic Coffs Harbour Beds in the SE portion of the New England Fold Belt are commonly transected by cleavage. These macroscopic folds are tight to isoclinal structures, with a consistent vergence to the NE. Axial surfaces are either steeply dipping to the SW or vertical, and are typically faulted. Anomalous bedding‐cleavage relations occur where the steeply dipping cleavage intersects overturned limbs of F1 macroscopic and some F1 mesoscopic folds. Elsewhere F1 mesoscopic folds have a well developed, axial‐surface cleavage and are rarely downward facing. Cleavage is commonly strike‐divergent from axial surfaces of F1 macroscopic folds, except adjacent to the Demon Fault System, where they are parallel. These anomalous cleavage‐folds relations possibly developed during the one deformation. D1 structures are refolded by kink‐like folds that are steeply plunging. The structural style of the D1 deformation indicates that it possibly resulted from accretionary processes at a consuming plate margin.  相似文献   

11.
构造置换及其控矿规律——以吉林板石沟铁矿为例   总被引：1，自引：0，他引：1       下载免费PDF全文
 强烈的塑性变形使华北地台东北部太古宙鞍山群中的吉林板石沟铁矿发生强烈的构造置换;造成原始仅有二三层的铁矿褶皱重复,在X(包络线)、Y(枢纽线)方向均被拉断,形成透镜状的复式褶皱勾状体。现有的19个矿组均为这种复式褶皱的转折端,并多呈"Z"型不对称形式。根据以上控矿规律本文提出两个找矿方向,一是包络线方向,另一是枢纽线方向,对1、3矿组具体地做了勘探设计。目前本文的勘探设计已得到勘探验证,新增铁矿储量数千万吨。  相似文献   

12.
The Late Ordovician Abercrombie Beds, south of Reids Flat, New South Wales, and adjacent to the Wyangala Batholith, show evidence of three successive fold episodes. First generation folds are tight to isoclinal, with fold axes ranging from vertical to horizontal and north‐trending, and steep axial‐plane slaty cleavage. Second generation folds are steeply plunging, tight to open with north‐striking axial planes. In pelitic rocks the axial plane structure is a crenulation cleavage which overprints the slaty cleavage. The first two fold episodes were accompanied by greenschist‐facies metamorphism. Granite emplacement occurred prior to the second fold episode. A third deformation was of relatively mild intensity and produced open, north‐trending folds with axial planes dipping moderately to the east, and crenulation cleavage as the axial plane structure in pelitic rocks. These latest folds are correlated with the latest folds in the Abercrombie Beds north of the Abercrombie River. The mapped area has no apparent macroscopic structure and may be considered as a single domain.  相似文献   

13.
During the refolding of an early non-isoclinal fold (say,F 1) we may find an offset or side-stepping of the axial surfaces of the later folds (say,F 2). The offsets can be seen in both type 2 and type 3 interference patterns. An analysis of the shear fold model shows that there is a maximum limit for the magnitude of side-stepping. The side-stepping is larger for larger interlimb angles ofF 1. It decreases with progressive tightening ofF 2. By recognizing such side-stepping we can predict on which side the F1 hinge should lie even if the hinge is unexposed or lies outside the domain of observation. The general rule for the sense of side-stepping is the same for shear folds, flexural slip folds and buckling folds. However, the side-stepping in buckling folds should be used with caution, sinceF 2 folds on buckled single-layers may show an offset whose sense is opposite to that predicted by the general rule.  相似文献   

14.
大别-苏鲁造山带不同岩片(块)经历了不同的褶皱变形.榴辉岩块(或透镜体)和硬玉石英岩片经历了高压-超高压背景下的两幕褶皱变形之后,在区域性第一幕变形期间主要发生透镜化为主,后期与围岩共同经历紧闭同斜第二幕褶皱.而其它岩片主要经历了现今野外可见的区域性三幕褶皱,其中区域性第一幕褶皱为片内残留褶皱,在斜长角闪岩透镜体中多见,宏观规律不明.区域性第二幕褶皱在露头尺度多见,轴面为折劈理,局部强烈置换成片理化带(复合片理或第二期片理),恢复第三幕褶皱改造作用后,揭示出各种岩片中的各级尺度的第二幕褶皱都为轴面北西倾南东倒、轴迹走向为NNE向的紧闭不对称褶皱,不对称性一致反映其指向与各种岩片向南东的逆冲运动有关.第三幕褶皱为以片理或折劈理为变形面的宽缓褶皱,轴迹走向NWW,枢纽向西倾伏.韧性剪切带为非透入性构造,分早晚两期,早期为韧性逆冲,新县穹隆以南,运动学标志指示向北逆冲,错切第二幕褶皱,结合新县穹隆北部向南的逆冲特征,反映这些韧性逆冲断层多数为第二幕大型褶皱翼部的次级逆冲断层;晚期为韧性滑脱带,其发育局限于几个岩性差异较大的接触带,带内伸展型折劈理发育,并对挤压构造样式有重要的改造作用.华北克拉通东部地块是华北克拉通的重要组成,其盖层古生界和三叠系在印支运动期间经历了一幕宽缓褶皱作用,其轴迹方向主体也为NWW向.这一褶皱构造明显在变形时间、变形样式和展布方向上都和大别-苏鲁造山带中的第三幕褶皱非常一致,说明它们具有动力学上的必然联系.同时,研究表明在华北克拉通东部地块中没有经历大别-苏鲁造山带中区域性第一、第二幕褶皱变形的记录,故本文认为印支期这两幕变形主要发生在华北板块东南缘的边界上,并没有波及到板内,而且从东向西高压-超高压岩石剥露具有穿时性.只有当华北板块和华南板块在第二幕变形之后构成了统一块体后,第三幕变形才波及华北板内.  相似文献   

15.
The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L1 0 intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.  相似文献   

16.
Analysis of shapes of folds, together with other structures such as axial plane foliation boudinage, mullions and cross joints, show that the F1 folds in the ‘main Raialo syncline’ were formed by buckling, and were subsequently modified by flattening normal to the axial planes and lengthening along the axis. The apparent buckle shortening of the F1 folds generally ranges between 70 and 80%. The folds were formed by simple shear (giving place to pure shear at certain stages) in an almost north-south direction on subhorizontal beds. Progressive deformation in the later stage of F1 folding resulted in gentle upright folding of F1 axial planes on F1′ axes slightly oblique to F1. The F2 folds, whose average shortening ranges from 20 to 30%, were also formed by buckling caused by horizontal compression in a nearly northwest-southeast direction. This folding was preceded and followed in some instances by homogeneous strain, as deduced fro mthe shapes of the F2 folds and the nature of variation of the F1 lineations. The F3 conjugate structures developed when the maximum compressive strain was vertical and the intermediate compressive strain northwest-southeast, almost normal to the subvertical F2 axial planes. The increase in the amplitude of the F2 folds in the last phase of F2 folding in certain zones resulted in an excess of vertical load, which dissipated with the formation of the F3 structures. In the last stage of movement (F4) the maximum compressive strain became horizontal along the strike of F2 axial planes, whereas the minimum compressive strain was normal to them. The F4 structures, therefore, point to a longitudinal shortening with reference to large scale F2 folding.  相似文献   

17.
The southeastern Lachlan Fold Belt at Batemans Bay on the New South Wales south coast is an accretionary complex with a prolonged deformation history. Early features include synsedimentary folds, mélange, disaggregated bedding and faults. Fabrics within the clast-in-matrix mélange and mudstone match those found in cores from the lower slopes of modern accretionary prisms. At the toe of the accretionary prism, the contact between the craton-derived Adaminaby Group and ocean floor deposits of the Wagonga Group is conformable. As subduction continued, the early structures were overprinted by (D1) deformation that produced meridional north – south-trending, tight to isoclinal folds (F1) and associated axial-plane cleavage (S1). This west-dipping subduction occurred in the Late Ordovician/Early Silurian but probably began much earlier. A younger regional deformation (D2) resulted in north – south-trending, open to tight folds (F2), slightly oblique to F1, and an axial-surface cleavage (S2).  相似文献   

18.
The ENE-plunging macroscopic folds, traced by calc gneiss interbanded with marble and sillimanite schist within the Peninsular Gneiss around Suganapuram in the ‘Palghat gap’ in southern India, represent structures of the second generation (D2). They have folded the axial planes of a set of D1 isoclinal folds on stratification coaxially, so that the mesoscopic D1 folds range from reclined in the hinge zones, through inclined to upright in the limb zones of the D2 folds. Orthogonal relation between stratification and axial planar cleavage, and ‘M’ shaped folds on layering locate the hinge zones of the D1 folds, whereas folds on axial planar cleavage with ‘M’ shaped folds are the sites of the D2 fold hinges. Extreme variation in the shapes of the isoclinal D1 folds from class 1B through class 1C to nearly class 2 of Ramsay is a consequence of buckling followed by flattening on layers of widely varying viscosity contrast. The large ENE-trending structures in this supracrustal belt within the Peninsular Gneiss in the ‘Palghat gap’ could not have evolved by reorientation of NS-trending structures of the Dharwar tectonic province to the north by movement along the Moyar-Bhavani shear zone which marks the boundary between the two provinces. This is because the Moyar and Bhavani faults are steep dipping reverse faults with dominant dip-slip component. Deceased  相似文献   

19.
The Dating rocks and Darjeeling gneisses, which constitute the Sikkim dome in eastern Himalaya, as well as the Gondwana and Buxa rocks of ‘Rangit Window’, disclose strikingly similar sequences of deformation and metamorphism. The structures in all the rocks belong to two generations. The structures of early generation are long-limbed, tight near-isoclinal folds which are often intrafolial and rootless. These intrafolial folds are associated with co-planar tight folds with variably oriented axes and sheath folds with arcuate hinges. Penetrative axial plane cleavage and mineral lineation are related structures; transposition of bedding is remarkable. This early phase of deformation (D 1) is accompanied by constructive metamorphism. The structures of later generation are open, asymmetrical or polyclinal; a crenulation cleavage or discrete fracture may occur. The structures of early generation are distorted by folds of later generation and recrystallized minerals are cataclastically deformed. Recrystallization is meagre or absent during the later phase of deformation (D 2). The present discussion is on structures of early generation and strain environment during theD 1 phase of deformation. The concentration of intrafolial folds in the vicinity of ductile shear zones and decollement or detachment surface (often described as ‘thrust’) may be considered in this context. The rocks of Darjeeling-Sikkim Himalaya display minor structures other than intrafolial folds and variably oriented co-planar folds. The state of finite strain in the rocks, as observed from features like flattened grains and pebbles, ptygmatic folds and boudinaged folds indicate combination of flattening and constrictional type strain. The significance of the intrafolial folds in the same rocks is discussed to probe the environment of strain during progressive deformation (D 1).  相似文献   

20.
In the Lesser Garhwal Himalaya, the North Almora Thrust separates the overlying medium-grade Dudatoli-Almora crystallines of Precambrian age from the unmetamorphosed to partly metamorphosed rocks of the Garhwal Group of Late Precambrian age. The crystalline nappe sheet consists of flaggy to schistose quartzites, granite gneisses and garnetiferous mica schist members in an ascending order. In different localities. different members of the Dudatoli-Almora crystallines are exposed along the thrust plane. Southwest of Adbadri fine-grained mylonitized schistose quartzites of Dudatoli-AImora crystallines are in contact with the underlying metabasites of the Garhwal Group. The mylonitized schistose quartzites consist of alternating thick (1 to 2m) quartzite and thin (10 to 20cm) micaceous quartzite bands. The micaceous quartzites can be further differentiated into alternating quartz-rich (0-5 to 2.0 cm thick) and mica-rich (0.2 to 1.0 cm thick) layers. In the quartzites the C-surfaces are parallel to the S-surfaces defined by the alternating quartz-rich and mica-rich layers. Further, the S-surfaces exhibit almost similar folds with multiple wavelengths where the axial planes are nearly parallel and enveloping surfaces are oblique to the lithological layering. The evolution of these folds has been envisaged in three phases of deformation on the basis of field evidence, fold geometry and microstructures. During the first phase buckle folds (F 1) developed in thin micaceous quartzite layers. whereas thick quartzite bands underwent only layer parallel shortening. During the second phase the stress orientation changed and the limbs ofF 1 folds were folded (F 2). During the third phase of deformation which coincided with thrusting, the rocks were sheared, mylonitized and developed microstructures exhibiting dynamic recrystallization by the processes of subgrain rotation, and continual and discontinuai grain boundary migration. This phase was also responsible for the development of C-surfaces parallel to the lithological layering. Further, in the folded micaceous quartzite layers shearing resulted in the development of C-surfaces parallel to the axial planes ofF 2 folds.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号