共查询到20条相似文献，搜索用时 890 毫秒
1.
Regime theories in gravel‐bed rivers: models,controlling variables,and applications in disturbed Italian rivers 
下载免费PDF全文
下载免费PDF全文 Downstream hydraulic geometry relationships describe the shape of alluvial channels in terms of bankfull width, flow depth, flow velocity, and channel slope. Recent investigations have stressed the difference in spatial scales associated with these variables and thus the time span required for their adjustment after a disturbance. The aim of this study is to explore the consequences in regime models considering the hypothesis that while channel width and depth adjust quickly to changes in water and sediment supply, reach slope requires a longer time span. Three theoretical models were applied. One model incorporates an extremal hypothesis (Millar RG. 2005. Theoretical regime equations for mobile gravel‐bed rivers with stable banks. Geomorphology 64 : 207–220), and the other two are fully physically based (Ikeda S, Parker G, Kimura Y. 1988. Stable width and depth of straight gravel rivers with heterogeneous bed materials. Water Resources Research 24 : 713–722; Parker G, Wilcock PR, Paola C, Dietrich W, Pitlick J. 2007. Physical basis for quasi universal relations describing bankfull hydraulic geometry of single‐thread gravel‐bed rivers. Journal of Geophysical Research 112 , DOI: 10.1029/2006JF000549). In order to evaluate the performance of models introducing the slope as an independent variable, we propose two modifications to previous models. The performance of regime models was tested against published data from 142 river reaches and new hydraulic geometry data from gravel‐bed rivers in Patagonia (Argentina) and north‐eastern Italy. Models that assume slope as a control (Ikeda et al., 1988; or Millar, 2005) predict channel depth and width reasonably well. Parker et al.'s (2007) model improved predictions because it filters the scatter in slope data with a relation slope–discharge. The extremal hypothesis model of Millar (2005) predicts comparably to the other physically based models. Millar's model was chosen to describe the recent changes in the Piave and Brenta rivers due to human intervention – mainly in‐channel gravel mining. The change in sediment supply and recovery was estimated for these rivers. This study supports the interpretation that sediment supply is the key factor guiding morphological changes in these rivers. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
Hydraulic engineering is usually based on theoretical analysis and/or numerical modelling simulation. As the dynamic behaviour of sediment movement under unsteady flow is still unclear, and field measurement is comparatively difficult during a large flood, prior investigations through flume experiments are required. A series of flume experiments, conducted using different inflow hydrographs without sediment supply from upstream, was carried out to investigate the sediment transport process under unsteady flow conditions. A series of triangular hydrographs were performed in the experiments. The results indicate that a temporal lag was found between the flow hydrograph peak and the sediment hydrograph peak because large size sand dunes lasted for a short period in the falling limb of the flow hydrograph. The temporal lag was found to be about equal to 6–15% of the flow hydrograph duration. Owing to the temporal lag, the total bedload yield in the rising period was less than that in the falling period. Furthermore, the measured total bedload yield in the unsteady flow experiments was larger than the predicted value, which was estimated by using the results obtained from the equivalent steady flow experiment. The peak bedload transport rate for unsteady flow conditions was also larger than the predicted value. The ratios of the measured to the predicted quantities mentioned above were found to be constant values for different shapes of hydrographs. It is, therefore, expected that the analytical results of sediment transport from equivalent steady flow can be a good reference for sediment transport under unsteady flow conditions. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
3.
Streams and rivers, particularly smaller ones, often do not maintain steady flow rates for long enough to reach equilibrium conditions for sediment transport and bed topography. In particular, streams in small watersheds may be subject to rapidly changing hydrographs, and relict bedforms from previous high flows can cause further disequilibrium that complicates the prediction of sediment transport rates. In order to advance the understanding of how bedforms respond to rapid changes in flow rate,... 相似文献
4.
Runoff and sediment were measured from agricultural land exposed to controlled simulated rainfall. We extended the kinematic unsteady overland sedimentation theory of prismatic channels to the experiments by considering both hydraulics and sediment dynamics of rill flow for changing flow geometries of nonuniform and unsteady rill development. The characteristic unimodal concentration peak observed in the experiments and the changing channel geometry were interpreted in theoretical terms. Overland sedimentation in unsteady nonprismatic rills under uniform rainfall can be described with kinematic models of flow, entrainment and deposition applied to developing flow geometries; this is not possible with sheet-flow models. Other interpretations are considered and experimental needs are identified. 相似文献
5.
Gravel‐bed river evolution in earthquake‐prone regions subject to cycled hydrographs and repeated sediment pulses 下载免费PDF全文
下载免费PDF全文 Sediment often enters rivers in the form of sediment pulses associated with landslides and debris flows. This is particularly so in gravel‐bed rivers in earthquake‐prone mountain regions, such as Southwest China. Under such circumstances, sediment pulses can rapidly change river topography and leave the river in repeated states of gradual recovery. In this paper, we implement a one‐dimensional morphodynamic model of river response to pulsed sediment supply. The model is validated using data from flume experiments, so demonstrating that it can successfully reproduce the overall morphodynamics of experimental pulses. The model is then used to explore the evolution of a gravel‐bed river subject to cycled hydrographs and repeated sediment pulses. These pulses are fed into the channel in a fixed region centered at a point halfway down the calculational domain. The pulsed sediment supply is in addition to a constant sediment supply at the upstream end. Results indicate that the river can reach a mobile‐bed equilibrium in which two regions exist within which bed elevation and surface grain size distribution vary periodically in time. One of these is at the upstream end, where a periodic discharge hydrograph and constant sediment supply are imposed, and the other is in a region about halfway down the channel where periodic sediment pulses are introduced. Outside these two regions, bed elevation and surface grain size distribution reach a mobile‐bed equilibrium that is invariant in time. The zone of fluctuation‐free mobile‐bed equilibrium upstream of the pulse region is not affected by repeated sediment pulses under the scenarios tested, but downstream of the pulse region, the channel reaches different fluctuation‐free mobile‐bed equilibriums under different sediment pulse scenarios. The vertical bed structure predicted by the simulations indicates that the cyclic variation associated with the hydrograph and sediment pulses can affect the substrate stratigraphy to some depth. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
6.
Alternate bars were formed by sediment transport in a flume with Froude-modelled flow and relative roughness characteristic of gravel-boulder channels with steep slopes. The flume (0.3 m wide × 7.5 m long) was filled with a sand-gravel mixture, which was also fed into the top of the flume at a constant rate under constant discharge. Channel slope was set at 0.03. Initially, coarse particles accumulated on incipient bar heads near one side of the flume and diverted flow and bedload transport across the flume toward a pool scoured against the opposite flume wall downstream. Sorting in the pool directed coarse particles onto the next bar head downstream. Alternate sequences of pools and coarse bar heads were thereby linked down the entire flume by interactions of sediment sorting, flow, and channel morphology. During episodes of bar construction, unsorted bedload invaded interior bar surfaces and was deposited. Persistent deposition of coarse particles on bar heads prevented downstream migration of bars by inhibiting bar-head erosion and bedload transport over bars. Likely factors leading to bar-head stabilization in modelled gravel-bed channels are coarse mixed-size sediment, steep channel gradients, and shallow depths. 相似文献
7.
If increased sediment supply to a river channel exceeds its transport capacity, deposition necessarily occurs as the bed adjusts to accommodate the increased supply. Both the mean and spatial patterns in bed elevation and grain size may change and an ability to understand their relative importance is needed to predict bed response. We report on an experiment in a field‐scale flume in which sediment supply is increased to a gravel bed with alternate bars. Sediment was recirculated in the experiments, but augmented in two steps, after which the bed was allowed to reach a new steady state. The transport rate at the end of the experiment was three times larger than at the start. High‐resolution sediment flux and topographic measurements, grain size derived from photographs, and hydrodynamic modeling allow us to document the topographic and textural response of the bed to increased sediment supply. The spatial patterns of bed topography and texture were forced by the flume setup and the initial and final steady states included long stationary alternate bars with associated grain size sorting. The transient bed contained several scales of shorter wavelength migrating bedforms superimposed on, and temporarily replacing the stationary alternate bars. Bed topography and textural patterns adjusted to increased sediment supply over different timescales. Bed slope and mean stress increased directly with sediment supply rate to produce a new transport steady state in a time about 2.5 times the minimum needed to deposit the required sediment wedge, indicating a trap efficiency of about 40% for the aggrading wedge. Adjustments in local topography and sorting, primarily in the form of smaller, migrating bars, continued for a period approximately equal to that required to initially reach transport steady state. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
A better understanding of bedrock incision mechanisms and processes is essential to the study of long‐term landscape evolution. Yet, little is known about flow dynamics in bedrock rivers, limiting our ability to make realistic predictions of local bedrock incision rates. A recent investigation of flow through bedrock canyons of the Fraser River revealed that plunging flows, defined by the downward‐directed movement of near surface flow toward the channel bed, occur in channels that have low width‐to‐depth ratios. Plunging flows occur into deep scour pools, which are often coincident with lateral constrictions and channel spanning submerged ridges (sills). A phenomenological investigation was undertaken to reproduce the flow fields observed in the Fraser canyons and to explore morphological controls on the occurrence and relative strength of plunging flow in bedrock canyons. Our observations show that the plunging flow structure can be produced along a scour pool entrance slope by accelerating the flow at the canyon entrance either over submerged sills or through lateral constrictions. Plunging flow appears to be a function of convective deceleration into a scour pool which can be enhanced by sill height, the amount of the channel width that is constricted, pool entrance slope, discharge, and a reduction in channel width‐to‐depth ratio. Plunging flow greatly enhances the potential for incision to occur along the channel bed and is an extreme departure from the assumptions of steady, uniform flow in bedrock incision models, highlighting the need for improved formulations that account for fluid flow. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
In mixed bedrock–alluvial rivers, the response of the system to a flood event can be affected by a number of factors, including coarse sediment availability in the channel, sediment supply from the hillslopes and upstream, flood sequencing and coarse sediment grain size distribution. However, the impact of along-stream changes in channel width on bedload transport dynamics remains largely unexplored. We combine field data, theory and numerical modelling to address this gap. First, we present observations from the Daan River gorge in western Taiwan, where the river flows through a 1 km long 20–50 m wide bedrock gorge bounded upstream and downstream by wide braidplains. We documented two flood events during which coarse sediment evacuation and redeposition appear to cause changes of up to several metres in channel bed elevation. Motivated by this case study, we examined the relationships between discharge, channel width and bedload transport capacity, and show that for a given slope narrow channels transport bedload more efficiently than wide ones at low discharges, whereas wider channels are more efficient at high discharges. We used the model sedFlow to explore this effect, running a random sequence of floods through a channel with a narrow gorge section bounded upstream and downstream by wider reaches. Channel response to imposed floods is complex, as high and low discharges drive different spatial patterns of erosion and deposition, and the channel may experience both of these regimes during the peak and recession periods of each flood. Our modelling suggests that width differences alone can drive substantial variations in sediment flux and bed response, without the need for variations in sediment supply or mobility. The fluctuations in sediment transport rates that result from width variations can lead to intermittent bed exposure, driving incision in different segments of the channel during different portions of the hydrograph. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd 相似文献
10.
Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
11.
Laboratory flume experiments were done to investigate bed load sediment transport by both steady and unsteady flows in a degrading channel. The bed, respectively composed of uniform sand, uniform gravel, or sand-gravel mixtures, always undergoes bulk degradation. It is found that both uniform and non-uniform bed load transport is enhanced greatly by unsteady flows as compared to their volume-equivalent steady flows. This enhancement effect is evaluated by means of an enhancement factor, which is shown to be larger with a coarser bed and lower discharges. Also, the fractional transport rates of gravel and sand in non-uniform sand-gravel mixtures are compared with their uniform counterparts under both steady and unsteady flows. The sand is found to be able to greatly promote the transport of gravel, whilst the gravel considerably hinders the transport of sand. Particularly, the promoting and hindering impacts are more pronounced at lower discharges and tend to be weakened by flow unsteadiness. 相似文献
12.
Sediment transport in ice-covered channels 总被引：1，自引：0，他引：1
The existence of ice cover has important effects on sediment transport and channel morphology for rivers in areas with an annual occurrence of an ice season. The interaction of sediment transport and s... 相似文献
13.
Non-uniform sediment deposited in a confined, steep mountain channel can alter the bed surface composition. This study evaluates the contribution of geometric and resistance parameters to bed sta-bilization and the reduction in sediment transport. Flume experiments were done under various hydraulic conditions with non-uniform bed material and no sediment supply from upstream. Results indicate that flume channels respond in a sequence of coarsening and with the formation of bedform-roughness features such as rapids, cascades, and steps. A bedform development coefficient is introduced and is shown to increase (i.e. vertical sinuosity develops) in response to increasing shear stress during the organization process. The bedform development coefficient also is positively correlated with the critical Shields number and Manning's roughness coefficient, suggesting the evolution of flow resistance with increasing bedform development. The sediment transport rate decreases with increasing bed shear stress and bedform development, further illustrating the effect of bed stabilization. An empirical sedi-ment transport model for an equilibrium condition is proposed that uses the bedform development coefficient, relative particle submergence (i.e. the ratio of mean water depth and maximum sediment diameter), modified bed slope, and discharge. The model suggests bedform development can play a primary role in reducing sediment transport (increasing bed stabilization). The model is an extension of Lane's (1955) relation specifically adapted for mountain streams. These results explain the significance of bedform development in heightening flow resistance, stabilizing the bed, and reducing sediment transport in coarse, steep channels. 相似文献
14.
Self‐adjustment in rivers: Evidence for least action as the primary control of alluvial‐channel form and process 下载免费PDF全文
下载免费PDF全文 Least action principle (LAP) in rivers is demonstrated by maximum flow efficiency (MFE) and is the foundation of variational mechanics based on energy and work rather than Newtonian force and momentum. Empirical evidence shows it to be the primary control for the adjustment of alluvial channels. Because most rivers flow with imposed water and sediment loads down valley gradients they have largely inherited, they self‐regulate energy expenditure to match the work they are required to do to remain stable. Overpowered systems develop a variety of channel patterns to expend excess energy and remain stable. Australia offers an opportunity to study low‐energy rivers closely adjusted to very low continental gradients. The anabranching Marshall and single‐thread Plenty Rivers flow down nearly straight channels with average H numbers [ratio between excess bed shear and width/depth (W/D) ratio] close to the optimum of 0.3 for stationary equilibrium. Ridge‐form divisions of the original channel width create anabranches that radically alter W/D ratios relative to bed shear, the same being true for short‐wide islands on the large low‐gradient Yangtze River in China. In contrast, Mount Chambers Creek in Australia's tectonically more active Flinders Ranges is accreting an alluvial fan with unstable distributary channels exhibiting H numbers well below the optimum. LAP also explains profound biases in Earth's stratigraphic record. Because meandering is an energy‐shedding mechanism, sinuous rivers sequester relatively little sediment resulting in all sequences being just a few tens of metres thick. In contrast, low‐energy braided disequilibrium systems can sequester sediment piles over a kilometre in thickness and tens of kilometres wide. LAP provides a new paradigm for river research by identifying the attractor state controlling river channel evolution. It links advances in theoretical physics to fluvial geomorphology, stratigraphy and hydraulic engineering and opens opportunities for diverse investigations in Earth system science. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
15.
Although the channel morphology of upland fluvial systems is known to be strongly controlled by sediment supply from hillslopes, it is still difficult to isolate this effect from the other controlling factors of channel forms, such as the sediment transport capacity (depending notably on the size of the catchment) and local conditions (e.g. confinement, riparian vegetation, valley-floor slope). The rivers in New Caledonia offer an interesting field laboratory to isolate the morphological effect of contrasted sediment supply conditions. Some of these rivers are known to be highly impacted by the coarse sediment waves induced by the mining of nickel deposits that started in the early 1870s, which was particularly intensive between the 1940s and 1970s. The propagation of the sediment pulses from the mining sites can be traced by the presence of wide and aggraded active channels along the stream network of nickel-rich peridotite massifs. A first set of 63 undisturbed catchments in peridotite massifs distributed across the Grande Terre was used to fit a classic scaling law between active channel width and drainage area. A second set of 86 impacted sites, where the presence of sediment waves was clearly attested by recent aerial imagery, showed systematically wider active channels, with a width ratio around 5 (established from the intercept ratio of width–area power laws). More importantly, this second set of disturbed sites confirmed that the residual of active channel widths, computed from the scaling law of undisturbed sites, is statistically positively related to the catchment-scale relative area of major mining sediment sources. It is therefore confirmed that the characterization of sediment supply conditions is crucial for the understanding of spatial patterns of active channel width, and this should be more thoroughly considered in morphological studies of rivers draining environments with contrasted geomorphic activities on hillslopes. © 2018 John Wiley & Sons, Ltd. 相似文献
16.
Glacier retreat leads to changes in channel pattern during deglaciation, in response to changing water, sediment and base level controls. Recent ongoing retreat at Skaftafellsjökull, Iceland (c. 50 m per year since 1998) has resulted in the formation of a sequence of river terraces, and several changes in river channel pattern. This paper compares widely used models of river channel pattern against the changes observed at Skaftafellsjökull. Doing this reveals the role of topographic forcing in determining proglacial channel pattern, whilst examining the predictive power and limitations of the various approaches to classifying river channels. Topography was found to play a large role in determining channel pattern in proglacial environments for two reasons: firstly, glacier retreat forces rivers to flow through confined moraine reaches. In these reaches, channels which theory predicts should be braided are forced to adopt a single channel. Secondly, proximal incision of proglacial rivers, accompanied by downstream aggradation, leads to changes in slope which force the river to cross channel pattern thresholds. The findings of this work indicate that in the short term, the majority of channel pattern change in proglacial rivers is due to topographic forcing, and that changes due to changing hydrology and sediment supply are initially relatively minor, although likely to increase in significance as deglaciation progresses. These findings have implications for palaeohydraulic studies, where changes in proglacial channel pattern are frequently interpreted as being due to changes in water or sediment supply. This paper shows that channel pattern can change at timescales faster than hydrological or sediment budget changes usually occur, in association with relatively minor changes in glacier mass balance. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
Bart&#x;omiej Wyzga 《地球表面变化过程与地形》1993,18(6):541-556
Processes induced by the channelization of the Raba River in the present century are examined to illustrate the response of a gravel-bed stream following narrowing and straightening of its channel. Up to 3 m of incision has occurred. The change from a slow and relatively steady degradation in the lower reaches to separate degradation events in the higher reaches is attributed to the differential rate of headcut retreat and to the control exerted by mid-channel bars upon the rate of river-energy dissipation. Progressive outwashing of finer grains from bed material has followed the diminishing sediment yield of the basin and the increase in stream power. The ensuing growth in mean grain size and changes in sediment fabric have increased boundary resistance to flow and reduced particle susceptibility to entrainment. Downstream magnification of peak discharges has become increasingly pronounced with the advancing incision. The decrease in flood-plain storage and self-acceleration of flows passing the relatively deep and straight channel has caused flood waves to become progressively more flashy in nature. An increase in channel depth and reduction in gradient caused by downward and backward erosion, as well as bed material coarsening has promoted the re-establishment of an equilibrium. Conversely, flow velocity increases due to flow concentration in the deepened channel. Reduction in grain mobility allows the river to attain a new equilibrium at flow-velocity and stream-power levels higher than before the channelization. Numerous disadvantages of the applied regulation scheme and its failure to reduce flood hazard raise the question of its maintenance. To be successful, any regulation design must take into account changes in sediment supply and flood hydrographs resulting from the simultaneous alterations in basin management. 相似文献
18.
Most downstream hydraulic geometry exponents have been found to be very close to the classic values reported by Leopold and Maddock (1953). These have been viewed as the simplified cases to general trends because the hydraulic geometry of alluvial channels is actually the product of ‘multivariate controls’ (Richards, 1982). This paper is an attempt to develop a soundly based foundation for the explanation of the physical mechanisms of these controls. A quantitative relationship between channel shape and boundary shear distribution developed from experimental flume results is found to be applicable in some instances to alluvial channels, particularly to stable canals. On the basis of this relationship, it is shown that downstream hydraulic geometry is determined not only by flow discharge, but also by channel slope, channel average roughness and sediment composition of the channel boundary. This is strongly supported by our analysis of 529 observations from both stable canals and natural rivers in the U.S.A. and the U.K. The difference between regime relations in canals and the hydraulic geometry of rivers appears to be caused mainly by channel slope and average roughness, which can be regarded as constants only in stable canals. The close relationship between discharge and channel average roughness observed in canals is not repeated in natural channels, partly because of the variety of flow values used to define the channel-forming discharge. Furthermore, it is indicated that the effects of the sediment composition of the channel boundary on hydraulic geometry are significant and need further investigation. 相似文献
19.
Relationship between the equilibrium morphology of river islands and flow-sediment dynamics based on the theory of minimum energy dissipation 总被引：2，自引：2，他引：0
River islands are vital geomorphic units in alluvial rivers, and the variation of their morphology and position plays a significant role in regulating flow-sediment transport and channel stability. Based on the theories of minimum energy dissipation theory of fluid movement and river morphodynamics, this study uses the river islands in anabranching channels to analyze the relationship between the shape coefficient of river island and the flow-sediment dynamics under stable equilibrium conditions... 相似文献
20.
Morphodynamics of a bedrock‐alluvial meander bend that incises as it migrates outward: approximate solution of permanent form 下载免费PDF全文
下载免费PDF全文 In meandering rivers cut into bedrock, erosion across a channel cross‐section can be strongly asymmetric. At a meander apex, deep undercutting of the outer bank can result in the formation of a hanging cliff (which may drive hillslope failure), whereas the inner bank adjoins a slip‐off slope that connects to the hillslope itself. Here we propose a physically‐based model for predicting channel planform migration and incision, point bar and slip‐off slope formation, bedrock abrasion, the spatial distribution of alluvial cover, and adaptation of channel width in a mixed bedrock‐alluvial channel. We simplify the analysis by considering a numerical model of steady, uniform bend flow satisfying cyclic boundary conditions. Thus in our analysis, ‘sediment supply’, i.e. the total volume of alluvium in the system, is conserved. In our numerical simulations, the migration rate of the outer bank is a specified parameter. Our simulations demonstrate the existence of an approximate state of dynamic equilibrium corresponding to a near‐solution of permanent form in which a bend of constant curvature, width, cross‐sectional shape and alluvial cover distribution migrates diagonally downward at constant speed, leaving a bedrock equivalent of a point bar on the inside of the bend. Channel width is set internally by the processes of migration and incision. We find that equilibrium width increases with increasing sediment supply, but is insensitive to outer bank migration rate. The slope of the bedrock point bar varies inversely with both outer bank migration rate and sediment supply. Although the migration rate of the outer bank is externally imposed here, we discuss a model modification that would allow lateral side‐wall abrasion to be treated in a manner similar to the process of bedrock incision. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献