Pulsar Wind Nebulae in Egret Error Boxes     

Mallory S. E. Roberts  Crystal L. Brogan  Bryan M. Gaensler  Jason W. T. Hessels  C.-Y. Ng  Roger W. Romani 《Astrophysics and Space Science》2005,297(1-4):93-100

A remarkable number of pulsar wind nebulae (PWN) are coincident with EGRET γ-ray sources. X-ray and radio imaging studies of unidentified EGRET sources have resulted in the discovery of at least six new pulsar wind nebulae (PWN). Stationary PWN (SPWN) appear to be associated with steady EGRET sources with hard spectra, typical for γ-ray pulsars. Their toroidal morphologies can help determine the geometry of the pulsar which is useful for constraining models of pulsed γ-ray emission. Rapidly moving PWN (RPWN) with more cometary morphologies seem to be associated with variable EGRET sources in regions where the ambient medium is dense compared to what is typical for the ISM.  相似文献   

HCN fluorescence on Titan     

Roger V. Yelle  Caitlin A. Griffith 《Icarus》2003,166(1):107-115

The HCN emission features near 3 μm recently detected by Geballe et al. (2003, Astrophys. J. 583, L39) are analyzed with a model for fluorescence of sunlight in the ν₃ band of HCN. The emission spectrum is consistent with current knowledge of the atmospheric temperature profile and the HCN distribution inferred from millimeter-wave observations. The spectrum is insensitive to the abundance of HCN in the thermosphere and the thousand-fold enhancement relative to photochemical models suggested by Geballe et al. (2003, Astrophys. J. 583, L39) is not required to explain the observations. We find that the spectrum can be matched with temperatures from 130 to 200 K, with slightly better fits at high temperature, contrary to the temperature determination of 130±10 K of Geballe et al. (2003, Astrophys. J. 583, L39). The HCN emission spectrum is sensitive to the collisional de-excitation probability, P₁₀, for the ν₃ state and we determine a value of 10⁻⁵ with an accuracy of about a factor of two. Analysis of absorption lines in the C₂H₂ν₃ band near 3 μm, detected in the same spectrum, indicate a C₂H₂ mole fraction near 0.01 μbar of 10⁻⁵ for P₁₀=10⁻⁴. The derived mole fraction, however, is dependent upon the value adopted for P₁₀ and lower values are required if P₁₀ at Titan temperatures is less than its room temperature value.  相似文献   

A variational formalism for tidal excitation: non-rotating, homentropic stars     

Yasser Rathore    Avery E. Broderick  Roger Blandford 《Monthly notices of the Royal Astronomical Society》2003,339(1):25-32

  相似文献   

Covariant magnetoionic theory – II. Radiative transfer     

Avery Broderick  Roger Blandford 《Monthly notices of the Royal Astronomical Society》2004,349(3):994-1008

  相似文献   

Sonar acoustic facies and sediment distribution on an area of the deep ocean floor     

Robert B. Kidd  Robert W. Simm  Roger C. Searle 《Marine and Petroleum Geology》1985,2(3):210-221

Long-range sidescan sonar can be used to map sediment distributions over wide expanses of deep ocean floor. Seven acoustic facies that arise from differing sediment or rock types have been mapped over the low-relief Saharan continental rise and Madeira abyssal plain. These have been calibrated with sampling, profiling and camera studies and the facies can be traced confidently on a regional scale using the sidescan data. The mapping of the sediment distribution shows that a complex interplay of turbidity current and debris flow processes can occur at a continental rise/abysaal plain transition over 1000 km from the nearest continental slope.  相似文献   

The second order characteristic condition for plastic flow     

Graham Weir  Roger Young 《国际地质力学数值与分析法杂志》2003,27(15):1299-1316

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Experiences with airborne and ground-based polarimetry     

Roger Hildebrand   《New Astronomy Reviews》2003,47(11-12):1009

Polarimetry in the far-infrared and submillimeter has been valuable in tracing magnetic fields in bright Galactic clouds. We discuss the techniques we have developed and trends we have found in polarization vs column density and wavelength. The polarization spectrum has proven to be more interesting than had been anticipated. It is potentially valuable in explaining grain alignment and in characterizing dust species. One can expect the infrared cirrus to be a much simpler environment than the molecular clouds that have heretofore been explored at multiple wavelengths. Although cirrus observations must deal with low signals and wide extent, it is becoming possible to measure accurately the spectral energy distribution from mid-infrared to microwave frequencies and it should soon become feasible to determine the polarization spectrum over the same range.  相似文献   

Sediment flux from a fjord during glacial periods, Isfjorden, Spitsbergen     

Roger LeB. Hooke  Anders Elverhi 《Global and Planetary Change》1996,12(1-4)

Sediment has accumulated in Isfjorden, a deep fjord in Spitsbergen, at a rate of 1.7 km³/k.y. during the past 13 k.y. Between 200 ka and 13 ka the fjord was free of ice for 120 k.y. Assuming a similar sediment delivery rate during this ice-free time, 200 km³ of sediment would have accumulated in the fjord. An alternative calculation based on erosion rates suggests that 400 km³ could have been delivered to Isfjorden during this 120 k.y.Seismic studies have identified a 330 km³ package of sediment on the continental shelf and slope west of Isfjorden. This sediment is believed to have accumulated between 200 ka and 13 ka. Herein we argue that this is sediment that was originally deposited in the fjord, and that it was transferred to the shelf by glaciers in the 70 ka during which the fjord was occupied by ice. Calculations using a steady-state numerical model suggest that the sediment could have been moved in a deforming layer of subglacial till and in subglacial melt streams at rates of 7.6 × 10⁶ m³ a⁻¹ and 0.3 × 10⁶ m³ a⁻¹, respectively, resulting in a total flux of 7.9 × 10⁶ m³ a⁻¹. It is unlikely that much sediment was moved in a basal layer of dirty ice, as intense basal melting would have inhibited sediment entrainment.Of the time that glaciers occupied the fjord, 60% would have been required to evacuate the accumulated sediment. During the remaining time, the ice could have been deepening the fjord.  相似文献   

The sandstone-hosted stratiform copper mineralization at Mwitapile and its relation to the mineralization at Lufukwe, Lufilian foreland, Democratic Republic of Congo   总被引：2，自引：0，他引：2  

Hamdy A. El Desouky  Philippe Muchez  Roger Tyler 《Ore Geology Reviews》2008,34(4):561-579

The Lufilian foreland is a triangular-shaped area located in the SE of the Democratic Republic of Congo and to the NE of the Lufilian arc, which hosts the well-known Central African Copperbelt. The Lufilian foreland recently became an interesting area with several vein-type (e.g., Dikulushi) and stratiform (e.g., Lufukwe and Mwitapile) copper occurrences. The Lufilian foreland stratiform Cu mineralization is, to date, observed in sandstone rock units belonging to the Nguba and Kundelungu Groups (Katanga Supergroup).The Mwitapile sandstone-hosted stratiform Cu prospect is located in the north eastern part of the Lufilian foreland. The host rock for the Cu mineralization is the Sonta Sandstone of the Ngule Subgroup (Kundelungu Group). A combined remote sensing, petrographic and fluid inclusion microthermometric analysis was performed at Mwitapile and compared with similar analysis previously carried out at Lufukwe to present a metallogenic model for the Mwitapile- and Lufukwe-type stratiform copper deposits. Interpretation of ETM+ satellite images for the Mwitapile prospect and the surrounding areas indicate the absence of NE–SW or ENE–WSW faults, similar to those observed controlling the mineralization at Lufukwe. Faults with these orientations are, however, present to the NW, W, SW and E of the Mwitapile prospect. At Mwitapile, the Sonta Sandstone host rock is intensely compacted, arkosic to calcareous with high silica cementation (first generation of authigenic quartz overgrowths). In the Sonta Sandstone, feldspar and calcite are present in disseminated, banded and nodular forms. Intense dissolution of these minerals caused the presence of disseminated rectangular, pipe-like and nodular dissolution cavities. Sulfide mineralization is mainly concentrated in these cavities. The hypogene sulfide minerals consist of two generations of pyrite, chalcopyrite, bornite and chalcocite, separated by a second generation of authigenic quartz overgrowth. The hypogene sulfide minerals are replaced by supergene digenite and covellite. Fluid inclusion microthermometry on the first authigenic quartz phase indicates silica precipitation from an H₂O–NaCl–CaCl₂ fluid with a minimum temperature between 111 and 182 °C and a salinity between 22.0 and 25.5 wt.% CaCl₂ equiv. Microthermometry on the second authigenic quartz overgrowths and in secondary trails related to the mineralization indicate that the mineralizing fluid is characterized by variable temperatures (Th = 120 to 280 °C) and salinities (2.4 to 19.8 wt.% NaCl equiv.) and by a general trend of increasing temperatures with increasing salinities.Comparison between Mwitapile and Lufukwe indicates that the stratiform Cu mineralization in the two deposits is controlled by similar sedimentary, diagenetic and structural factors and likely formed from a similar mineralizing fluid. A post-orogenic timing is proposed for the mineralization in both deposits. The main mineralization controlling factors are grain size, clay and pyrobitumen content, the amount and degree of feldspar and/or calcite dissolution and the presence of NE–SW to ENE–WSW faults. The data support a post-orogenic fluid-mixing model for the Mwitapile- and Lufukwe-type sandstone-hosted stratiform Cu deposits, in which the mineralization is related to the mixing between a Cu-rich hydrothermal fluid, with a temperature up to 280 °C and a maximum salinity of 19.8 wt.% NaCl equiv., with a colder low salinity reducing fluid present in the sandstone host rock. The mineralizing fluid likely migrated upwards to the sandstone source rocks along NE–SW to ENE–WSW orientated faults. At Lufukwe, the highest copper grades at surface outcrops and boreholes were found along and near to these faults. At Mwitapile, where such faults are 2 to 3 km away, the Cu grades are much lower than at Lufukwe. Copper precipitation was possibly promoted by reduction from pre-existing hydrocarbons and non-copper sulfides and by the decrease in fluid salinity and temperature during mixing. Based on this research, new Cu prospects were proposed at Lufukwe and Mwitapile and a set of recommendations for further Cu exploration in the Lufilian foreland is presented.  相似文献   

FRANZ BOAS AND AMERICAN GEOGRAPHY     

Roger T. Trindell 《The Professional geographer》1969,21(5):328-332

  相似文献