首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
Sandy beaches are often characterized by the presence of sand bars, whose characteristics (growth, migration speed, etc.) strongly depend on offshore wave conditions, such as wave height and angle of wave incidence. This study addresses the impact of a sinusoidally time-varying wave angle of incidence with different time-means on the saturation height, migration speed and longshore spacing of sand bars. Model results show that shore-transverse sand bars (so-called TBR bars) eventually develop under a time-varying wave angle. Depending on the time-mean, amplitude and period of the varying angle of wave incidence, the mean heights and mean migration speeds of the bars can be larger or smaller than their corresponding values in the case of time-invariant angles. Bars might not even form when the wave angle varies around a too large oblique mean value, whereas bars exist in the case of a time-invariant wave angle. The oscillations in both bar height and migration speed are large if the period of the time-varying wave angle is close to the adjustment timescale of the system and if large differences in the local growth and migration rates of the bars occur during one oscillation period. The oscillations in bar height are a combination of harmonics with the principal period and half the period of the time-varying wave angle, whereas those of migration speed contain only the principal period. Bars that are subject to time-varying wave angles have larger longshore crest-to-crest spacings than those which form under fixed wave angles. Physical explanations for these findings are given. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd  相似文献   

2.
The occurrence and characteristics of transverse finger bars at Surfers Paradise (Gold Coast, Australia) have been quantified with 4 years of time-exposure video images. These bars are attached to the inner terrace and have an oblique orientation with respect to the coastline. They are observed during 24 % of the study period, in patches up to 15 bars, with an average lifetime of 5 days and a mean wavelength of 32 m. The bars are observed during obliquely incident waves of intermediate heights. Bar crests typically point toward the incoming wave direction, i.e., they are up-current oriented. The most frequent beach state when bars are present (43 % of the time) is a rhythmic low-tide terrace and an undulating outer bar. A morphodynamic model, which describes the feedback between waves, currents, and bed evolution, has been applied to study the mechanisms for finger bar formation. Realistic positive feedback leading to the formation of the observed bars only occurs if the sediment resuspension due to roller-induced turbulence is included. This causes the depth-averaged sediment concentration to decrease in the seaward direction, enhancing the convergence of sediment transport in the offshore-directed flow perturbations that occur over the up-current bars. The longshore current strength also plays an important role; the offshore root-mean-square wave height and angle must be larger than some critical values (0.5 m and 20°, respectively, at 18-m depth). Model-data comparison indicates that the modeled bar shape characteristics (up-current orientation) and the wave conditions leading to the bar formation agree with data, while the modeled wavelengths and migration rates are larger than the observed ones. The discrepancies might be because in the model we neglect the influence of the large-scale beach configuration.  相似文献   

3.
A 9.3-year dataset of low-tide time-exposure images from Surfers Paradise, Northern Gold Coast, Australia was used to characterise the state dynamics of a double sandbar system. The morphology of the nearshore sandbars was described by means of the sequential bar state classification scheme of Wright and Short [1984. Morphodynamic variability of surf zones and beaches: a synthesis. Marine Geology 56, 93-118]. Besides the two end members (the dissipative (D) and the reflective (R) states) and the four intermediate states (longshore bar and trough (LBT), rhythmic bar and beach (RBB), transverse bar and rip (TBR) and low tide terrace (LTT)), we identified two additional intermediate bar states. The erosive transverse bar and rip (eTBR) state related to the dominant oblique angle of wave incidence at the study site and the rhythmic low tide terrace (rLTT) related to the multiple bar setting. Using the alongshore barline variability and alongshore trough continuity as morphological indicators enabled the objective classification of the inner and outer bar states from the images. The outer bar was mostly in the TBR state and generally advanced sequentially through the states LBT-RBB-TBR-eTBR-LBT, with occasional transitions to the D state. Wave events led to abrupt state transitions of the outer bar, but, in contrast to expectations, did not necessarily correspond to upstate transitions. Instead, upstate (downstate) transitions coincided with angles of wave incidence θ larger (smaller) than 30°. The upstate TBR-eTBR-LBT sequence during high-angle events highlights the role of alongshore currents in bar straightening. The outer bar was found to govern the state of the inner bar to a large extent. Two types of inner bar behaviour were distinguished, based on the outer bar state. For intermediate outer bar states, the alongshore variability of the dominant inner rLTT state (52% in time) mainly related to that of the outer bar, implying some sort of morphological coupling. For dissipative outer bar states, however, the more upstate inner bar frequently separated from the shoreline and persistently developed rip channels as TBR became the most frequent state (60% in time).  相似文献   

4.
Intertidal bars are common in mesotidal/macrotidal low-to-moderate energy coastal environments and an understanding of their morphodynamics is important from the perspective of both coastal scientists and managers. However, previous studies have typically been limited by considering bar systems two-dimensionally, or with very limited alongshore resolution. This article presents the first multi-annual study of intertidal alongshore bars and troughs in a macrotidal environment using airborne LiDAR (light detection and ranging) data to extract three-dimensional (3D) bar morphology at high resolution. Bar and trough positions are mapped along a 17.5 km stretch of coastline in the northwest of England on the eastern Irish Sea, using eight complete, and one partial, LiDAR surveys spanning 17 years. Typically, 3–4 bars are present, with significant obliquity identified in their orientation. This orientation mirrors the alignment of waves from the dominant south-westerly direction of wave approach, undergoing refraction as they approach the shoreline. Bars also become narrower and steeper as they migrate onshore, in a pattern reminiscent of wave shoaling. This suggests that the configuration of the bars is being influenced by overlying wave activity. Net onshore migration is present for the entire coastline, though rates vary alongshore, and periods of offshore migration may occur locally, with greatest variability between northern and southern regions of the coastline. This work highlights the need to consider intertidal bar systems as 3D, particularly on coastlines with complex configurations and bathymetry, as localized studies of bar migration can overlook 3D behaviour. Furthermore, the wider potential of LiDAR data in enabling high-resolution morphodynamic studies is clear, both within the coastal domain and beyond. © 2019 John Wiley & Sons, Ltd.  相似文献   

5.
The southwestern (SW) coast of Africa (Namibia and Angola) features long sandy beaches and a wave climate dominated by energetic swells from the Southsouthwest (SSW), therefore approaching the coast with a very high obliquity. Satellite images reveal that along that coast there are many shoreline sand waves with wavelengths ranging from 2 to 8 km. A more detailed study, including a Fourier analysis of the shoreline position, yields the wavelengths (among this range) with the highest spectral density concentration. Also, it becomes apparent that at least some of the sand waves are dynamically active rather than being controlled by the geological setting. A morphodynamic model is used to test the hypothesis that these sand waves could emerge as free morphodynamic instabilities of the coastline due to the obliquity in wave incidence. It is found that the period of the incident water waves, Tp, is crucial to establish the tendency to stability or instability, instability increasing for decreasing period, whilst there is some discrepancy in the observed periods. Model results for Tp = 7–8 s clearly show the tendency for the coast to develop free sand waves at about 4 km wavelength within a few years, which migrate to the north at rates of 0.2–0.6 km yr?1. For larger Tp or steeper profiles, the coast is stable but sand waves originated by other mechanisms can propagate downdrift with little decay.  相似文献   

6.
Crescentic sandbars and rip channels along wave‐dominated sandy beaches are relevant to understand localized beach and dune erosion during storms. In recent years, a paradigm shift from hydrodynamic template models to self‐organization mechanisms occurred to explain the formation of these rhythmic features. In double sandbar systems, both the inner‐ and outer‐bar rip channels and crescentic planshapes are now believed to be free instabilities of the nearshore system arising through self‐organization mechanisms alone. However, the occasional occurrence of one or two inner‐bar rip channels within one outer‐bar crescent suggests a forced, morphologically coupled origin. Here we use a nonlinear morphodynamic model to show that alongshore variability in outer‐bar depth, and the relative importance of wave breaking versus wave focussing by refraction across the outer bar, is crucial to the inner‐bar rip channel development. The coupling patterns simulated by our model are similar to those observed in the field. Morphological coupling requires a template in the morphology (outer‐bar geometry) which, through the positive feedback between flow, sediment transport and the evolving morphology (that is, self‐organization) enforces the development of coupling patterns. We therefore introduce a novel mechanism that blurs the distinction between self‐organization and template mechanisms. This mechanism may also be extended to explain the dynamics of other nearshore patterns, such as beach cusps. The impact of this novel mechanism on the alongshore variability of inner‐bar rip channels is investigated in the companion paper. Copyright © 2010 John Wiley and Sons, Ltd.  相似文献   

7.
Sandbars, submerged ridges of sand parallel to the shoreline, affect surfzone circulation, beach topography and beach width. Under time‐varying wave forcing, sandbars may migrate onshore and offshore, referred to as two‐dimensional (2D) behaviour, and vary in planshape from alongshore uniform ridges to alongshore non‐uniform ridges through the growth and decay of three‐dimensional (3D) patterns, referred to as 3D behaviour. Although 2D and 3D sandbar behaviour is reasonably well understood along straight coasts, this is not the case for curved coasts, where the curvature can invoke spatial variability in wave forcing. Here, we analyse sandbar behaviour along the ~3000 m man‐made curved coastline of the Sand Engine, Netherlands, and determine the wave conditions governing this behaviour. 2D and 3D behaviour was quantified within a box north and west of the Sand Engine's tip, respectively, using a 2.4‐year dataset of daily low‐tide video images and a sparser bathymetric dataset. The northern and western sides behaved similarly in terms of 2D behaviour, with seasonal onshore and offshore migration, resulting in a stable position on inter‐annual timescales. However, both sandbar geometry and 3D behaviour differed substantially between both sides. The geometric differences (bar shape, bar crest depth and wavelength of 3D patterns) are consistent with computed alongshore differences in breaker height due to refraction. The differences in the timing in growth, decay and morphological coupling of 3D patterns in the sandbar and shoreline are likely related to differences in the local wave angle, imposed by the curved coast. Similar dependency of bar behaviour on local wave height and angle may be expected elsewhere along curved coasts, e.g. shoreline sandwaves, cuspate forelands or embayed beaches. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

8.
Nearshore sandbars, located in <10 m water depth, can contain remarkably periodic alongshore undulations in both cross‐shore position and depth. In a double sandbar system, the alongshore spacing of these morphological patterns in the inner sandbar may be identical to those in the outer sandbar. Although this morphological coupling has been observed previously, its frequency and predominance remain unclear. In this paper, we use a 9.3‐year dataset of daily low‐tide time exposure images from the double‐barred beach at Surfers Paradise (Gold Coast, Australia) to analyse the temporal and spatial characteristics of morphological coupling within a double sandbar system. We distinguish five types of morphological coupling between the inner and outer sandbars, of which four coincide with a downstate progression of the outer bar. Coupling is either in‐phase (with a landward perturbation of the inner bar facing an outer‐bar horn) or out‐of‐phase (with a seaward perturbation of the inner bar facing an outer‐bar horn), where the coupled inner‐bar features either consist of rip channels or, predominantly, perturbations of the low‐tide terrace. Cross‐correlation of the image‐derived inner‐ and outer‐bar patterns shows coupling to be a common phenomenon in the double sandbar system studied here, with coupling in 40% of the observations. In contrast to previous observations of sandbar–shoreline coupling at single‐barred beaches, in‐phase coupling (85% of all coupled bar patterns) predominates over out‐of‐phase coupling (15%). Based on our observations and bathymetries assimilated from the images for a restricted set of coupling events, we hypothesize that the angle of offshore wave incidence, wave height and depth variations along the outer sandbar determine the type of flow pattern (cell circulations versus meandering currents) above the inner bar and hence steer the type of coupling. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

9.
利用电磁波在导电媒质界面反射系数的附加相角,导出了电场垂直于入射面的非均匀电磁波在导电介质界面的类全反射横向偏移,并对横向偏移进行了相关计算,绘出了横向偏移随入射角的变化曲线. 结果表明:入射角在相移常数临界角、衰减常数临界角和90°处,横向偏移曲线存在三个间断点. 当入射角等于这三个角时,横向偏移为无穷大,即电磁波将沿界面传播;当入射角在这三个角附近时,横向偏移变得非常大.  相似文献   

10.
Multiple intertidal bars and troughs, often referred to as ‘ridges and runnels’, are significant features on many macrotidal sandy beaches. Along the coastline of England and Wales, they are particularly prevalent in the vicinity of estuaries, where the nearshore gradient is gentle and a large surplus of sediment is generally present. This paper examines the dynamics of such bar systems along the north Lincolnshire coast. A digital elevation model of the intertidal morphology obtained using LIDAR demonstrates that three to five intertidal bars are consistently present with a spacing of approximately 100 m. The largest and most pronounced bars (height = 0·5–0·8 m) are found around mean sea level, whereas the least developed bars (height = 0·2–0·5 m) occur in the lower intertidal zone. Annual aerial photographs of the intertidal bar morphology were inspected to try to track individual bars from year to year to derive bar migration rates; however, there is little resemblance between concurrent photographs, and ‘resetting’ of the intertidal profile occurs on an annual basis. Three‐dimensional beach surveys were conducted monthly at three locations along the north Lincolnshire coast over a one‐year period. The intertidal bar morphology responds strongly to the seasonal variation in the forcing conditions, and bars are least numerous and flattest during the more energetic winter months. Morphological changes over the monthly time scale are strongly affected by longshore sediment transport processes and the intertidal bar morphology can migrate along the beach at rates of up to 30 m per month. The behaviour of intertidal bars is complex and varies over a range of spatial and temporal scales in response to a combination of forcing factors (e.g. incident wave energy, different types of wave processes, longshore and cross‐shore sediment transport), relaxation time and morphodynamic feedback. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

11.
When analysing the seismic response of pile groups, a vertically‐incident wavefield is usually employed even though it does not necessarily correspond to the worst case scenario. This work aims to study the influences of both the type of seismic body wave and its angle of incidence on the dynamic response of pile foundations. To this end, the formulation of SV, SH and P obliquely‐incident waves is presented and implemented in a frequency‐domain boundary element‐finite element code for the dynamic analysis of pile foundations and piled structures. Results are presented in terms of bending moments at cap level of single piles and 3 × 3 pile groups, both in frequency and in time domains. It is found that, in general, the vertical incidence is not the most unfavourable situation. In particular, obliquely‐incident SV waves with angles of incidence smaller than the critical one, a situation in which the mechanism of propagation of the waves in the soil changes and surface waves appear, yield bending moments much larger than those obtained for vertically‐incident wavefields. It is also shown that the influence of pile‐to‐pile interaction on the kinematic bending moments becomes significant for non‐vertical incidence, especially for P and SV waves. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

12.
Subtidal nearshore sandbars may exhibit cyclic net offshore migration during their multi‐annual lifetime along many sandy coasts. Although this type of behavior can extend continuously for several kilometers, alongshore variations in cross‐shore bar position and bar amplitude are commonly observed. Alongshore variability is greatest when bars display km‐scale disruptions, indicative of a distinct alongshore phase shift in the bar cycle. An outer bar is then attached to an inner bar, forming a phenomenon known as a bar switch. Here, we investigate such large‐scale alongshore variability using a process‐based numerical profile model and observations at 24 transects along a 6 km section of the barred beach at Noordwijk, The Netherlands. When alongshore variability is limited, the model predicts that the bars migrate offshore at approximately the same rate (i.e. the bars remain in phase). Only under specific bar configurations with high wave‐energy levels is an increase in the alongshore variability predicted. This suggests that cross‐shore processes may trigger a switch in the case of specific antecedent morphological configurations combined with storm conditions. It is expected that three‐dimensional (3D) flow patterns augment the alongshore variability in such instances. In contrast to the observed bar behaviour, predicted bar morphologies on either side of a switch remain in different phases, even though the bars are occasionally located at a similar cross‐shore position. In short, the 1D model is not able to remove a bar switch. This data‐model mismatch suggests that 3D flow patterns are key to the dissipation of bar switches. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
The southwest coast of England was subjected to an unusually energetic sequence of Atlantic storms during the 2013/2014 winter, with the 8‐week period from mid‐December to mid‐February representing the most energetic period since at least 1953. A regional analysis of the hydrodynamic forcing and morphological response of these storms along the SW coast of England highlighted the importance of both storm‐ and site‐specific conditions. The key factor that controls the Atlantic storm wave conditions along the south coast of southwest England is the storm track. Energetic inshore wave conditions along this coast require a relatively southward storm track which enables offshore waves to propagate up the English Channel relatively unimpeded. The timing of the storm in relation to the tidal stage is also important, and coastal impacts along the macro‐tidal southwest coast of England are maximised when the peak storm waves coincide with spring high tide. The role of storm surge is limited and rarely exceeds 1 m. The geomorphic storm response along the southwest coast of England displayed considerable spatial variability; this is mainly attributed to the embayed nature of the coastline and the associated variability in coastal orientation. On west‐facing beaches typical of the north coast, the westerly Atlantic storm waves approached the coastline shore‐parallel, and the prevailing storm response was offshore sediment transport. Many of these north coast beaches experienced extensive beach and dune erosion, and some of the beaches were completely stripped of sediment, exposing a rocky shore platform. On the south coast, the westerly Atlantic storm waves refract and diffract to become southerly inshore storm waves and for the southeast‐facing beaches this results in large incident wave angles and strong eastward littoral drift. Many south coast beaches exhibited rotation, with the western part of the beaches eroding and the eastern part accreting. © 2015 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

14.
The Aquitanian Coast (France) is a high-energy meso-macrotidal environment exhibiting a highly variable double sandbar system. The inner and the outer bar generally exhibit a bar and rip morphology and persistent crescentic patterns, respectively. In June 2007, an intense five-day field experiment was carried out at Biscarrosse Beach. A large array of sensors was deployed on a well-developed southward-oriented bar and rip morphology. Daily topographic surveys were carried out together with video imaging to investigate beach morphodynamic evolution. During the experiment, offshore significant wave height ranged from 0.5 to 3 m, with a persistent shore-normal angle. This paper identifies two types of behavior of an observed rip current: (1) for low-energy waves, the rip current is active only between low and mid tide with maximum mean rip current velocity reaching 0.8 m/s for an offshore significant wave height (Hs) lower than 1 m; (2) for high-energy waves (Hs≈ 2.5–3 m), the rip current was active over the whole tide cycle with the presence of persistent intense offshore-directed flows between mid and high tide. For both low and high-energy waves, very low-frequency pulsations (15–30 min) of the mean currents are observed on both feeder and rip channels.A persistent slow shoreward migration of the sandbar was observed during the experiment while no significant alongshore migration of the system was measured. Onshore migration during the high-energy waves can be explained by different sediment transport processes such as flow velocity skewness, wave asymmetry or bed ventilation. High-frequency local measurements of the bed evolution show the presence of significant (in the order of 10 cm) fluctuations (in the order of 1 h). These fluctuations, observed for both low- and high-energy waves, are thought to be ripples and megaripples, respectively and may play an important but still poorly understood role in the larger scale morphodynamics. The present dataset improves the knowledge of rip dynamics as well as the morphological response of strongly alongshore non-uniform meso-macrotidal beaches.  相似文献   

15.
计算地震初至波视出射角方法   总被引:1,自引:0,他引:1       下载免费PDF全文
在理论上证明了使用地震初至波位移、速度或加速度记录资料在时间域或频率域计算视出射角,使视出射角计算不受位移记录及时间域限制。在干扰信号频率段与有效信号频率段存在差异时分别在时间域和频率域进行了视出射角计算,结果表明在频率域中得到的视出射角基本与理论值相符,与方位角无关;而在时间域中获得的视出射角与理论值波动很大。应用实际地震波记录资料计算了不同台站的视出射角,其结果同样表明在频率域中获得的视出射角比时间域视出射角更加稳定和可信。  相似文献   

16.
New analysis of wave records at Hualien Harbor during Typhoon Tim in 1994 reveals that for certain wave periods, the ratios of measured wave heights among three available wave stations inside the harbor are unique and roughly remain the same during the severest period of resonance. Since there is no incident infragravity wave (period from 80 to 220 s) information at offshore boundaries, these unique ratios become the surrogate of background truth for checking the performance of numerical simulations. A new simulation effort using a large (45 × 17 km) modeling domain, high-resolution (20 × 20 m) grid and the RIDE wave transformation model were conducted to simulate the observed responses. Comparison of the modeling results with the observations showed reasonable agreement. Additional model studies using ideal bathymetries with the same grid domain and resolution were also conducted to help interpret the prototype modeling results. The effects of two types of commonly used remedies were first examined by using the ideal bathymetry, and then, the prototype bathymetry. The results demonstrated that a single 1-km long, shore-parallel breakwater could significantly reduce the resonance. The results of using three shore-parallel breakwaters, however, are no better. More studies to identify the optimum design associated with the shore-parallel breakwater (location, length, etc.) are necessary for the optimum reduction of resonance at Hualien Harbor.  相似文献   

17.
Five weeks of hourly, 10-min time-exposure video images were used to analyze the meso–macro-tidal double-barred Truc Vert Beach, SW France, under intense wave forcing. The four storms experienced, one of which with an offshore significant wave height over 8 m, induced dramatic changes in the double sandbar system. The subtidal outer bar migrated offshore rapidly (up to 30–50 m/day) and its pre-existing crescentic pattern was wiped out. The seaward-protruding parts of the outer bar barely migrated offshore during the most intense storm, whereas a landward-protruding part was shed off. Over the entire study period, the outer-bar dynamics was dominated by alongshore-averaged changes rather than alongshore non-uniform changes, while the opposite was observed for the inner bar. In addition, the outer-bar dynamics was predominantly controlled by the time-varying offshore wave conditions, whereas the inner-bar dynamics was influenced largely by the tide-range variations. Our observations put forward the key role of morphological settings (the presence of a subtidal bar and its shape) and tidal range in governing inner-bar behaviour within a double sandbar dynamics, and provide strong support for previous suggestions that sandbars cannot be studied in isolation.  相似文献   

18.
何卫平  周宜红 《地震学报》2019,41(3):277-288
针对地震动空间差异问题,以半无限空间内平面SV波入射为例,采用波动理论和叠加原理相结合的方法研究地震动的空间特征。首先,分析入射波和反射波在空间内形成质点运动的叠加模式差异,并依此对空间域进行划分;其次,针对不同泊松比和SV波入射角情形研究叠加区与分离区的分界线控制情况;最后,对比分析不同空间域内的质点运动在峰值、持时等方面的特征。研究结果显示:当SV波入射时,叠加区与分离区的分界线通常由z3 (反射P波与反射SV波的分离线)控制;同时存在两种特殊情况,当SV波垂直入射时,分界线由z1 (入射SV波与反射SV波的分离线)控制,当反射SV波幅值为零时,分界线由z2 (入射SV波与反射P波的分离线)控制。在入射波和反射波的影响下,质点运动时程的形状具有水平不变性。三波贡献时段只出现在深度小于z1的质点的运动时程中,且持时随着深度的增加线性减少;双波贡献时段出现在位于叠加区内的质点的运动时程中,持时沿深度先增加后减少;单波贡献时段随着深度的增加而逐渐加长,在分离区达到最大值。质点运动总持时随深度逐渐增加,在分离线z2和z3深度处存在两个拐点。在质点运动峰值方面,靠近自由面的叠加区质点运动峰值变化较大,深度较大的叠加区和分离区的质点运动峰值一般不变。   相似文献   

19.
非均匀电磁波在导电媒质界面反射的横向偏移   总被引:7,自引:2,他引:5  
由电磁场边值关系给出了非均匀电磁波在导电媒质界面反射时反射系数所产生的附加相角. 利用这一附加相角导出了非均匀电磁波在导电介质界面的横向偏移,并进行了横向偏移的相关计算,绘出了横向偏移随入射角的变化曲线. 结果表明:在导电媒质界面反射电磁波的横向偏移随入射角的增大而增大,当入射角接近90°时,电磁波在界面要传播较长时间后才返回第一种媒质. 在同一入射角电场偏振化方向在入射面的电磁波要比电场偏振化方向垂直于入射面的电磁波的横向偏移大,随着电磁波频率的增加横向偏移变小.  相似文献   

20.
产生地震动空间效应的主要原因是地质构造的变化会极大地改变复杂场地条件下到达不同观测点的地震波,因此地震波振幅和相位发生明显变化。本文利用有限元和边界元耦合的方法,通过建立雷克子波入射时的非线性响应模型求解复杂场地条件下的波动积分方程,进行复杂近地表构造中地震波场数值模拟,旨在分析复杂场地条件下入射方向不同的地震波的动力响应规律。研究结果显示近地表会极大地改变地震波传播特征,导致地震波传播趋向不一致性的因素是由于复杂场地条件重建了地震波的传播路径,尤其须指出的是非一致性地表位移响应源于软土层中低频子波的传播。在地震响应分析中导致系统不同动力响应的其他原因是主频和地震波速度结构的改变,同时地震波入射角度的改变会引起到达观测点的时间滞后,地表位移响应随着入射角度的增大而增加,地震动的空间效应随着入射角度的减小而愈趋明显。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号