A probabilistic model for sediment entrainment:The role of bed irregularity     

Mohamed Elhakeem  A.N. Thanos Papanicolaou  Achilleas G. Tsakiris 《国际泥沙研究》2017,32(2)

A generalized probabilistic model is developed in this study to predict sediment entrainment under the incipient motion, rolling, and pickup modes. A novelty of the proposed model is that it incorporates in its formulation the probability density function of the bed shear stress, instead of the near-bed velocity fluctuations, to account for the effects of both flow turbulence and bed surface irregularity on sediment entrainment. The proposed model incorporates in its formulation the collective effects of three para-meters describing bed surface irregularity, namely the relative roughness, the volumetric fraction and relative position of sediment particles within the active layer. Another key feature of the model is that it provides a criterion for estimating the lift and drag coefficients jointly based on the recognition that lift and drag forces acting on sediment particles are interdependent and vary with particle protrusion and packing density. The model was validated using laboratory data of both fine and coarse sediment and was compared with previously published models. The study results show that all the examined models perform adequately for the fine sediment data, where the sediment particles have more uniform gra-dation and relative roughness is not a factor. The proposed model was particularly suited for the coarse sediment data, where the increased bed irregularity was captured by the new parameters introduced in the model formulation. As a result, the proposed model yielded smaller prediction errors and physically acceptable values for the lift coefficient compared to the other models in case of the coarse sediment data.  相似文献   

Assessing sediment transport dynamics from energy perspective by using the instrumented particle     

《国际泥沙研究》2022,37(6):833-846

Sediment transport has been extensively studied. There is still a need to learn more about the mechanisms that make bed particles move, which is caused by turbulent flow in the low transport stages (above the motion threshold and below continuous transport). This work is focused on the use of an advanced tool to obtain a better perception of sediment transport dynamical methods: an instrumented particle equipped with a micro-electromechanical systems (MEMS) sensor. Particle transport experiments were carried out in a laboratory flume under a variety of well-controlled above-the-threshold-of-motion flow conditions. By using sensor data, the kinetic energies were calculated with different flow rates and particle densities (mimicking different types of sediments sizes) to generate the probability distribution functions (PDFs) of particle transport features, like the total kinetic energy of particles, which provided information about particle interaction with the bed surface during its motion. The energy transfer efficiency was also studied, which can link the rate of energy transferred from the flow to the particle transport, so it can determine how efficiently a flow can transfer energy to the particle and how it affects the magnitude of sediment transport. In general, the instrumented particle response by a series of experiments showed consistent and satisfactory results and demonstrated its capability to record inertial dynamics because of flow turbulence at low cost. These experiments used different particle sizes and densities than those found in real-world sediments because of sensor size and lab limitations. They do, however, provide a framework and trends that others can use to do more research into bed load transport rates in built canals and natural rivers.  相似文献   

INCIPIENT MOTION OF COARSE PARTICLES IN HIGH GRADIENT RIVERS     

Shengfa YANG Jiang HU Xingkui WANG 《国际泥沙研究》2006,21(3):220-229

1 INTRODUCTION To data, there are about 100 formulae for the incipient motion of sediment, among which, only about ten are convenient and practical. In 1936, using nondimensional drag force and the sediment’s Reynolds number, Shields (1936) presented the…  相似文献   

Formation and erosion of sediment cover in an experimental bedrock‐alluvial channel          下载免费PDF全文

Rebecca Hodge  Trevor Hoey  Georgios Maniatis  Emilie Leprêtre 《地球表面变化过程与地形》2016,41(10):1409-1420

Sediment grains in a bedrock‐alluvial river will be deposited within or adjacent to a sediment patch, or as isolated grains on the bedrock surface. Previous analysis of grain geometry has demonstrated that these arrangements produce significant differences in grain entrainment shear stress. However, this analysis neglected potential interactions between the sediment patches, local hydraulics and grain entrainment. We present a series of flume experiments that measure the influence of sediment patches on grain entrainment. The flume had a planar bed with roughness that was much smaller than the diameters of the mobile grains. In each experiment sediment was added either as individual grains or as a single sediment pulse. Flow was then increased until the sediment was entrained. Analysis of the experiments demonstrates that: (1) for individual grains, coarse grains are entrained at a higher discharge than fine grains; (2) once sediment patches are present, the different in entrainment discharge between coarse and fine grains is greatly reduced; (3) the sheltering effect of patches also increases the entrainment discharge of isolated grains; (4) entire sediment patches break‐up and are eroded quickly, rather than through progressive grain‐by‐grain erosion; (5) as discharge increases there is some tendency for patches to become more elongate and flow‐aligned, and more randomly distributed across the bed. One implication of this research is that the critical shear stress in bedrock‐alluvial channels will be a function of the extent of the sediment cover. Another is that the influence of sediment patches equalizes critical shear stresses between different grain sizes and grain locations, meaning that these factors may not need to be accounted for. Further research is needed to quantify interactions between sediment patches, grain entrainment and local hydraulics on rougher bedrock surfaces, and under different types of sediment supply. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Spatial variations in surface sediment structure in riffle–pool sequences: a preliminary test of the Differential Sediment Entrainment Hypothesis (DSEH)     

Rebecca A. Hodge  David A. Sear  Julian Leyland 《地球表面变化过程与地形》2013,38(5):449-465

Riffle–pool sequences are maintained through the preferential entrainment of sediment grains from pools rather than riffles. This preferential entrainment has been attributed to a reversal in the magnitude of velocity and shear stress under high flows; however the Differential Sediment Entrainment Hypothesis (DSEH) postulates that differential entrainment can instead result from spatial sedimentological contrasts. Here we use a novel suite of in situ grain‐scale field measurements from a riffle–pool sequence to parameterize a physically‐based model of grain entrainment. Field measurements include pivoting angles, lift forces and high resolution digital elevation models (DEMs) acquired using terrestrial laser scanning, from which particle exposure, protrusion and surface roughness were derived. The entrainment model results show that grains in pools have a lower critical entrainment shear stress than grains in either pool exits or riffles. This is because pool grains have looser packing, hence greater exposure and lower pivoting angles. Conversely, riffle and pool exit grains have denser packing, lower exposure and higher pivoting angles. A cohesive matrix further stabilizes pool exit grains. The resulting predictions of critical entrainment shear stress for grains in different subunits are compared with spatial patterns of bed shear stress derived from a two‐dimensional computational fluid dynamics (CFD) model of the reach. The CFD model predicts that, under bankfull conditions, pools experience lower shear stresses than riffles and pool exits. However, the difference in sediment entrainment shear stress is sufficiently large that sediment in pools is still more likely to be entrained than sediment in pool exits or riffles, resulting in differential entrainment under bankfull flows. Significantly, this differential entrainment does not require a reversal in flow velocities or shear stress, suggesting that sedimentological contrasts alone may be sufficient for the maintenance of riffle–pool sequences. This finding has implications for the prediction of sediment transport and the morphological evolution of gravel‐bed rivers. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Flume experiments on wood entrainment in rivers     

D. Bocchiola  M.C. Rulli  R. Rosso 《Advances in water resources》2006

A flume experiment on entrainment of woody debris is carried out. Woody debris is modeled using smooth, cylindrical dowels, in touch with the flume bed. The water depth and velocity are evaluated that initiate the motion of the partially submerged dowels. On the basis of the experimental finding, a theoretical model of log entrainment is developed, providing in dimensionless form the equilibrium equation for incipient motion. The experiment shows that the equilibrium equation must keep into account the modification of the local water profile, affecting the force balance at incipient motion. This issue has been apparently neglected in the wood entrainment models so far developed. The entrainment model is less sensitive to the choice of the apparent drag coefficient. The capability of the model in predicting the critical log diameter for initiation of motion is discussed and compared with that from the recent entrainment model from Braudrick and Grant, 2000. The comparison shows interesting results and provide evidence of the needs for further studies on wood entrainment in rivers.  相似文献   

Aerodynamic entrainment thresholds and dislodgement rates on impervious and permeable beds     

Jon J. Williams  Graeme R. Butterfield  David G. Clark 《地球表面变化过程与地形》1990,15(3):255-264

In the literature it has been suggested that on permeable, granular beds, both the threshold and rate of aerodynamic entrainment may be affected significantly by seepage flows into and out of the bed induced by fluctuating pressures in the overlying turbulent boundary layer. Using a range of grain sizes and flow conditions, the series of laboratory experiments reported here compares directly the aerodynamic entrainment of loose grains overlying fixed permeable sediment beds with that occuring over fixed impervious beds. For a given granular material, no significant differences in entrainment dynamics on the two types of bed were observed and in the range of flow conditions examined both the threshold shear velocity (U _*T) and the aerodynamic entrainment coefficient (k) were found to be independent of bed permeability.  相似文献   

LABORATORY EXPERIMENTS ON NAVIGATION-INDUCED BED SHEAR STRESSES AND SEDIMENT RESUSPENSION     

M.H GARCIA  D.M. ADMIRAAL  J.F. RODRIGUEZ 《国际泥沙研究》1999,(2)

IINTRODUCTIONDependingonflowandoperatingconditions,navigationtrafficmaycausesignificantresuspensionofdepositedsediment.Jnanumberofsituationsresuspensionofdepositedsedimentcanhavesevereenvironmentalrepercussions.Forinstance,ifthesedimentcontainscontaminants,thecontaminantsmaybereentrainedwiththesediment,taintingthewaterquality(Erdmannetal.,1994).Inothersituations,..evedincreasesintheamountofcleansuspendedsedimentcanbedetrimentalforaquaticplantsandanimals(Garcfaetal.,1998).Inordertoassesst…  相似文献   

Prediction of coarse particle movement with adaptive neuro‐fuzzy inference systems     

Manousos Valyrakis  Panayiotis Diplas  Clint L. Dancey 《水文研究》2011,25(22):3513-3524

The use of a neuro‐fuzzy approach is proposed to model the dynamics of entrainment of a coarse particle by rolling. It is hypothesized that near‐bed turbulent flow structures of different magnitude and duration or frequency and energy content are responsible for the particle displacement. A number of Adaptive Neuro‐Fuzzy Inference System (ANFIS) architectures are proposed and developed to link the hydrodynamic forcing exerted on a solid particle to its response, and model the underlying nonlinear dynamics of the system. ANFIS combines the advantages of fuzzy inference (If‐Then) rules with the power of learning and adaptation of the neural networks. The model components and forecasting procedure are discussed in detail. To demonstrate the model's applicability for near‐threshold flow conditions an example is provided, where flow velocity and particle displacement data from flume experiments are used as input and output for the training and testing of the ANFIS models. In particular, a Laser Doppler velocimeter (LDV) is employed to obtain long records of local streamwise velocity components upstream of a mobile exposed particle. These measurements are acquired synchronously with the time history of the particle's position detected by a setup including a He‐Ne laser and a photodetector. The representation of the input signal in the time and frequency domain is implemented and the best performing models are found capable of reproducing the complex dynamics of particle response. Following a trial and error approach the different models are compared in terms of their efficiency and forecast accuracy using a number of performance indices. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Coarse bed load transport in an alluvial gravel bed stream,Dupuyer Creek,Montana     

Andrew C. Whitaker  Donald F. Potts 《地球表面变化过程与地形》2007,32(13):1984-2004

Coarse bed load was sampled in a gravel/cobble bed stream during two major floods in the snowmelt runoff season. The channel is characterized by high rates of bank erosion and, therefore, high rates of sediment supply and bed load flux. Peak discharge reached four times bank‐full, and bed load was sampled at flows 0·7–1·7 times bank‐full. A large aperture bed load sampler (1 m by 0·45 m) captured the largest particles in motion, and specifically targeted the coarse bed load size distribution by using a relatively large mesh (32 mm or D₂₅ of streambed surface size distribution). Bed load flux was highly variable, with a peak value of 0·85 kg/s/m for the coarse fraction above 38 mm. Bed load size distribution and maximum particle size was related to flow strength. Entrainment was size selective for particles D₇₀ and larger (88–155 mm), while particles in the range D₃₀–D₇₀ (35–88 mm) ceased to move at essentially the same flow. Bed load flux was size selective in that coarse fractions of the streambed surface were under‐represented in or absent from the bed load. Painted tracer particles revealed that the streambed surface in the riffles could remain stable even during high rates of bed load transport. These observations suggest that a large proportion of bed load sediments was sourced from outside the riffles. Repeat surveys confirmed major scour and fill in pools (up to 0·75 m), and bank erosion (>2 m), which together contributed large volumes of sediment to the bed load. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Analysis of bedload transport characteristics of Idaho streams and rivers     

Jasna Muskatirovic 《地球表面变化过程与地形》2008,33(11):1757-1768

Field data are essential in evaluating the adequacy of predictive equations for sediment transport. Each dataset based on the sediment transport rates and other relevant information gives an increased understanding and improved quantification of different factors influencing the sediment transport regime in the specific environment. Data collected for 33 sites on 31 mountain streams and rivers in Central Idaho have enabled the analysis of sediment transport characteristics in streams and rivers with different geological, topographic, morphological, hydrological, hydraulic, and sedimentological characteristics. All of these streams and rivers have armored, poorly sorted bed material with the median particle size of surface layer coarser than the subsurface layer. The fact that the largest particles in the bedload samples did not exceed the median particle size of the bed surface material indicates that the armor layer is stable for the observed flow discharges (generally bankfull or less, and in some cases two times higher than bankfull discharge). The bedload transport is size‐selective. The transport rates are generally low, since sediment supply is less than the ability of flow to move the sediment for one range of flow discharges, or, the hydraulic ability of the stream is insufficient for entrainment of the coarse bed material. Detailed analyses of bedload transport rates, bedload and bed material characteristics were performed for each site. The obtained results and conclusions are used to identify different influences on bedload transport rates in analyzed gravel‐bed rivers. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

One-dimensional morphodynamic model for retrogressive erosion based on a sediment entrainment theory at high flow velocity     

Zenghui Wang  Junqiang Xia  Meirong Zhou  Shanshan Deng  Tao Li 《国际泥沙研究》2021,36(2):306-316

Retrogressive erosion is a high-speed erosion process that usually occurs during the rapid release of stored water in reservoirs built on sandy rivers.Retrogressive erosion has been utilized in the practice of reservoir sedimentation control,but accurate prediction of the bed deformation process by numerical models has rarely been reported.The current study presents a one-dimensional morphodynamic model for simulating the evolution process of retrogressive erosion induced by high-velocity flows on steep slopes.The governing equations apply a Cartesian coordinate system with a vertically oriented z axis.The bed surface gradient and friction terms in the flow equations include correction factors to take account of the effects of high slope on flow movement.The net vertical sediment flux term in the sediment transport and bed deformation equations is calculated using an equation of erosion velocity.Particularly,this equation is based on an empirical relation between the sediment entrainment rate and the Shields parameter in contrast to the traditional sediment transport capacity,and the critical Shields parameter is modified by taking into account the permeability of the sediment layer and the stability of particles on a slope.The feedback of scoured sediment on the flow movement is considered by additional terms in the governing equations.Flume experiments of retrogressive erosion in literature were simulated to validate the model.The temporal variations of the longitudinal profiles of the free surface and channel bed and the sediment transport rate were well predicted.The algorithm calculating sediment entrainment in the proposed model also was validated for an experiment measuring entrainment rate from the literature.More importantly,it was found that the morphodynamic model using the sediment transport capacity equation predicts the trend of cumulative erosion contrary to the measurements,while results of the proposed model can follow a similar trend with the observed data in the retrogressive erosion process.  相似文献   

Assessing entrainment of bed material in a debris‐flow event: a theoretical approach incorporating Monte Carlo method          下载免费PDF全文

Zheng Han  Guangqi Chen  Yange Li  Yi He 《地球表面变化过程与地形》2015,40(14):1877-1890

Entrainment of underlying bed sediment by a debris flow can significantly increase the debris‐flow magnitude. To study this phenomenon, a theoretical approach to assessing bed‐sediment entrainment is presented. The approach is based on a static approximation that bed‐sediment entrainment occurs when the shearing stress of the flow is sufficiently high to overcome the basal resistance of the bed sediment. In order to delineate erodible zones in a channel, we analyze the critical condition of this static equilibrium model, and subsequently propose a new concept of a critical line to detect the entrainment reaches in a channel. Considering the spatial and temporal uncertainties of the input parameter, the approach is further incorporated within a Monte Carlo method, and the distribution of entrainment zones and post‐entrainment volumes can be analyzed. This approach is illustrated by back‐analysis of the 2010 Yohutagawa debris‐flow event, Japan. Results from 10 000 trials of Monte Carlo simulation are compared with the in situ surveys. It is shown that the present approach can be satisfactorily used to delineate erodible zones and estimate possible entrainment volume of the event. Discussion regarding the sensitivities and limitations of the approach concludes the paper. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

A heuristic probabilistic approach to estimating size-dependent mobility of nonuniform sediment     

Befekadu?Taddesse?WoldegiorgisEmail authorView author&#;s OrcID profile  Fu-Chun?Wu  Ann?Van?Griensven  Willy?Bauwens 《Stochastic Environmental Research and Risk Assessment (SERRA)》2018,32(6):1771-1782

This paper presents a heuristic probabilistic approach to estimating the size-dependent mobilities of nonuniform sediment based on the pre- and post-entrainment particle size distributions (PSDs), assuming that the PSDs are lognormally distributed. The approach fits a lognormal probability density function to the pre-entrainment PSD of bed sediment and uses the threshold particle size of incipient motion and the concept of sediment mixture to estimate the PSDs of the entrained sediment and post-entrainment bed sediment. The new approach is simple in physical sense and significantly reduces the complexity and computation time and resource required by detailed sediment mobility models. It is calibrated and validated with laboratory and field data by comparing to the size-dependent mobilities predicted with the existing empirical lognormal cumulative distribution function approach. The novel features of the current approach are: (1) separating the entrained and non-entrained sediments by a threshold particle size, which is a modified critical particle size of incipient motion by accounting for the mixed-size effects, and (2) using the mixture-based pre- and post-entrainment PSDs to provide a continuous estimate of the size-dependent sediment mobility.  相似文献   

Simulation of individual particle movement in a gravel streambed     

J. Mikael Malmaeus  Marwan A. Hassan 《地球表面变化过程与地形》2002,27(1):81-97

A two‐dimensional simulation model of travel distances of individual particles in a gravel‐bed river is presented. The model is based on a number of rules, which include particle size, entrainment, trajectory, distance of movement and entrapment. Particle interactions are controlled by resistance fields defined about each obstacle and critical elevation defined in the model. Resistance fields, particle dropping and critical elevation rules control particle interactions. The interaction rules cause the particles to develop pebble clusters, stone cells and transverse structures (transverse ribs). The simulated travel distances of individual particles are consistent with reported field results. Individual particle travel distances were simulated using two different models; one without interactions between the individual particles and the stationary bed and one with interactions. The case without interactions demonstrates the random nature of sediment transport, and narrow ranges of travel distances. Wider ranges of travel distances, similar to those for natural situations, were obtained for the cases with interactions. The more intense the interaction between the mobile stones and the stationary ones, the wider the range of distances of travel for a given particle size. Modelling the mean travel distance yielded a result similar to that published previously, which was based on empirical data. Well developed bed‐surface structures were obtained for relatively poorly sorted sediment with intense interactions between particles. Transverse structures developed when relatively large particles were allowed to move. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Smart Sediment Particle: A novel approach to investigating fluvial bed entrainment using instrumented sensors     

Yushu Xie  Bruce W.Melville  Asaad Y.Shamseldin  Colin N.Whittaker  Yifan Yang 《国际泥沙研究》2023,38(1):66-82

The Smart Sediment Particle(SSP) instrumented with multiple sensors to obtain tri-axial linear accelerations is used for studying the mechanism of coarse grain entrainment. Three bed arrangements are tested to examine their influences on entrainment processes and the threshold force and impulse conditions. The SSP shows satisfactory precision to capture the imperceptible movement tendencies immediately(e.g., 0.15 s) after the dislodgement. The experimental results show that bed packing can signi...  相似文献   

An improved formula for incipient sediment motion in vegetated open channel flows   总被引：1，自引：0，他引：1  

Xiang Wang  Wenxin Huai  Zhixian Cao 《国际泥沙研究》2022,37(1):47-53

Quantifying incipient sediment motion in vegetated open channel flow is pivotal for estimating bed load transport and the aquatic ecological environment in rivers.A new formula is developed to predict the critical flow velocity for incipient sediment motion in the presence of emergent vegetation,by incorporating the influence of vegetation drag that characterizes the effects of mean flow and turbulence on sediment movement.The proposed formula is shown to agree with existing experimental data.Mo...  相似文献   

Modeling the initiation of sediment motion under a wide range of flow conditions using a Geno-Mamdani Fuzzy Inference System method     

《国际泥沙研究》2020,35(5):467-483

The current study introduces a novel approach to estimate the incipient motion of sediments under a wide range of flow regimes by developing a fuzzy model with a fuzzy-band that refers to a transition from weak motion to general motion of sediment. The partial sediment entrainment is defined by fuzzy sets considering the uncertainty related to the individual ratio of inertia to viscous forces which is the definition of shear Reynolds number. In the current study, the Mamdani Fuzzy Inference System (Mamdani FIS) is used to develop a comprehensive fuzzy model of the incipient motion of sediment. The Mamdani FIS has a shortcoming regarding the training of the fuzzy model. To estimate the dimensionless shear stress, a new method is developed by combining a genetic algorithm with the fuzzy approach which is named the Geno-Mamdani Fuzzy Inference System (GMFIS) method. The performance of the GMFIS model is evaluated using experimental data by considering root mean square error (RMSE), Nash-Sutcliffe coefficient of efficiency (CE), degree of robustness (D_r), and concordance coefficient (CC) as evaluation criteria. The GMFIS model performed very well based on the RMSE, CE, D_r, and CC values and satisfactorily represented the three types of incipient motion. Finally, a new range of fuzzy, dimensionless, critical shear stress values is established in all flow conditions from weak to general sediment entrainment.  相似文献   

Incipient motion conditions for single rock fragments in simulated rill flow     

D. Torri  J. Poesen 《地球表面变化过程与地形》1988,13(3):225-237

Laboratory experiments using simulated tilting rill channels with different bed roughnesses have been conducted to determine hydraulic conditions for incipient motion of single rock fragments lying on rill beds. These threshold conditions can be described by a modified Shields' entrainment parameter (θ_m) and relative depth (Z), adjusted for rill conditions. The negative relation found between θ_m and Z also fits steep (stream) channel data collected by other investigators. Plots of the classical Shields' entrainment parameter (θ) versus both relative depth and relative particle size also showed clear negative trends. Special care has been taken to avoid false relations that can arise between compound parameters. This occurs when the latter are not independent from each other because of their definitions.  相似文献   

Incompressible SPH scour model for movable bed dam break flows     

《Advances in water resources》2015

In this study an incompressible smoothed particle hydrodynamics (ISPH) approach coupled with the sediment erosion model is developed to investigate the sediment bed scour and grain movement under the dam break flows. Two-phase formulations are used in the ISPH numerical algorithms to examine the free surface and bed evolution profiles, in which the entrained sediments are treated as a different fluid component as compared with the water. The sediment bed erosion model is based on the concept of pick-up flow velocity and the sediment is initiated when the local flow velocity exceeds a critical value. The proposed model is used to reproduce the sediment erosion and follow-on entrainment process under an instantaneous dam break flow and the results are compared with those from the weakly compressible moving particle semi-implicit (WCMPS) method as well as the experimental data. It has been demonstrated that the two-phase ISPH model performed well with the experimental data. The study shows that the ISPH modelling approach can accurately predict the dynamic sediment scouring process without the need to use empirical sediment transport formulas.  相似文献