共查询到20条相似文献，搜索用时 62 毫秒
1.
A technique for the evaluation of the hydrodynamic coefficients of ships is outlined for ship oscillating in a numerical wave tank, which is established on Computational Fluid Dynamics (CFD) theories. The numerical simulation of ship sections and bodies forced oscillating in the tank are carried out. The added mass and damping coefficients are obtained by the decomposition of the computational results, which agree well with the corresponding ones of potential theories. 相似文献
2.
Bottom ventilated cavitation has been proven as a very effective drag reduction technology for river ships and planning boats. The ability of this technology to withstand the sea wave impact usual for seagoing ships depends on the ship bottom shape and could be enhanced by some active flow control devices. Therefore, there is the need in numerical tools to estimate the effects of bottom changes and to design such devices. The fundamentals of active flow control for the ship bottom ventilated cavitation are considered here on the basis of a special model of cavitating flows. This model takes into account the air compressibility in the cavity, as well as the multi-frequency nature of the incoming flow in wavy seas and of the cavity response on perturbations by incoming flow. The numerical method corresponding to this model was developed and widely manifested with an example of a ship model tested in a towing tank at Froude numbers between 0.4 and 0.7.The impact of waves in head seas and following seas on cavities has been studied in the range of wavelengths from 0.45 to 1.2 of the model (or ship) length. An oscillating cavitator-spoiler was considered as the flow controlling devices in this study. The oscillation magnitude and the phase shift between cavitator oscillation and the incoming waves have been varied to determine the best flow control parameters. The main results of the provided computational analysis include oscillations of cavity surface, of the pressure in cavity and of the moment of hydrodynamic load on the cavitator. The major part of computations has been carried out for the flap oscillating at the frequency coinciding with the wave frequency, but the effect of a frequency shift is also analyzed. 相似文献
3.
A general formulation is given of the hydrodynamic forces on a ship, oscillating about a state of rest in 6df in response to excitation by a harmonic wave in shallow water. A method is described to obtain a numerical approximation of the velocity potential, describing the flow around the moving ship by means of a distribution of discrete three-dimensional sources.With this method it is possible to take the influence of a quay into account.Calculated values of wave excited forces, hydrodynamic coefficients and motions of a 200,000 tdw tanker in shallow water are presented and compared with experimental results. 相似文献
4.
基于自研的HUST-Ship黏性流CFD求解器,提出了一种船舶耐波性数值试验水池参数化建模方法和网格生成技术。在自研的CFD软件平台中,根据波浪参数(规则波的波长、波高和不规则波的特征周期、有效波高)自动生成船舶耐波性数值试验水池。以结构化重叠网格技术为基础,分别对船舶与水池进行网格划分并进行网格的组装、重叠,实现船舶在耐波性数值试验水池中的数值“试验”,对船舶耐波性进行数值预报。根据波浪种类分为规则波数值试验水池与不规则波数值试验水池,可对各类波浪条件实现精确可靠的数值造波,模拟船舶在各种波浪环境中运动响应、耐波性事件与非线性运动特性。采用参数化建模方法生成的耐波性数值试验水池能够提高建模和网格生成效率,通过对国际标模进行数值预报并与船模试验结果对比,验证了参数化建模方法生成的耐波性数值试验水池对船舶在波浪中运动性能的计算精度。 相似文献
5.
In the present study, three-dimensional sloshing phenomena occurring in liquid cargo tanks are numerically simulated. The Navier-Stokes equations and continuity equation are used for the governing equations, and solved with a finite difference method in a rectangular fixed staggered mesh system. The positions of free surface are defined by the Marker density method satisfying the free-surface boundary conditions, and the flows of the gas and liquid regions are simulated simultaneously. The irregular leg length and star method is employed on the cells near the free surface for the computations of pressure. The computation results are compared with other experimental results to verify the consistency of the present numerical method, and the agreements are reasonably good. Furthermore, the flow characteristics inside a partially filled liquid tank of a real sized ship oscillating regularly and irregularly are computed to verify the possibility of practical application of the present method. 相似文献
6.
This study has been undertaken to quantify the tank wall effects on resistance estimation of ship models. Given the finite width of a tank, the flow around a ship model has been numerically modelled and the pressure and pressure related drag have been estimated.Since the model runs at speeds essentially in the laminar and transient speed range, an inviscid model has been chosen for obtaining the pressure drag component in the numerical studies. Grid dependency study has been done to optimize the mesh in the control volume for the numerical studies. An unstructured grid consisting of hexahedral cells has been used in the volume of fluid (VOF) model. The model chosen is a medium speed, ocean going barge and the residuary resistance has been obtained for different tank width conditions. The tank width has been defined using a non-dimensionalized parameter W/B (tank width W, model width B) ratio. The study shows that the residuary resistance obtained at W/B=5.0 is free from tank wall influence for the chosen model. The findings of the study have been compared by testing two geosim models under the same tank width conditions. The residuary resistance values have been compared with numerical results. The combined numerical experimental approach provides interesting results of consistency for comparison. The tank wall influences suggested by the numerical study are well quantified in the experimental study and give useful guideline for limiting wall influences. 相似文献
7.
港口内靠码头系泊船运动的计算 总被引：11，自引：1，他引：11
本文以英国南海岸处Ｓｈｏｒｅｈａｍ港内系泊船为例，研究了港口内靠码头系泊船运动的数值计算问题。该船的实船实验和模型实验已经完成，为验证本文计算结果提供了依据。运动方程在时域内求解。在计算船体脉冲响应函数时，引入了船体阻尼系数在频率很低时的渐近表达式和一迭代算法。分析了港内共振波浪和其对船体的作用力。讨论了靠码头系泊船运动的非线性特征。计算结果与实验结果符合很好。 相似文献
8.
F. Prez Arribas 《Ocean Engineering》2007,34(7):946-955
Added resistance in waves is an important part of ship dynamic due to its economical effect on ship exploitation. Can the ship sustain speed in a rough sea state? If not, this will produce delays and economical losses if added resistance is not taken into account in the propulsion design. There are not many simple methods to obtain the added resistance in waves of a ship, and the validity of the results is not always good enough for different ships. In this paper, some theories that can be used to predict the added resistance of a ship are studied and validated against seakeeping tests of some monohull models. Tests and results focus in head seas, which are the most severe for the added resistance. Experimental results are compared with numerical calculations and conclusions about the range of application of the presented theories are obtained. 相似文献
9.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
10.
Performance of wave-energy devices of the oscillating water column (OWC) type is greatly enhanced when a resonant condition with the forcing waves is maintained. The natural frequency of such systems can in general be tuned to resonate with a given wave forcing frequency. In this paper we address the tuning of an OWC sea-water pump to polychromatic waves. We report results of wave tank experiments, which were conducted with a scale model of the pump. Also, a numerical solution for the pump equations, which were proven in previous work to successfully describe its behavior when driven by monochromatic waves, is tested with various polychromatic wave spectra. Results of the numerical model forced by the wave trains measured in the wave tank experiments are used to develop a tuning criterion for the sea-water pump. 相似文献
11.
《Ocean Engineering》2007,34(5-6):645-652
Although International Maritime Organization (IMO) has taken many measures to minimize ship collisions, ships carrying liquid cargo sometimes do get struck by other vessels. The outflow of crude oil causes very serious consequences to the environment. In such cases it is necessary to analyze the response of structure of struck liquid cargo-filled tank to account for fluid–structure interaction accurately. In this paper, numerical simulation of collision between a container ship with double hull very large crude carrier (VLCC) is presented. Three different numerical simulation mothods were adopted to model fluid–structure interaction in liquid-filled cargo tank, namely arbitrary Lagrangian–Eulerian finite element method, Lagrangian finite element method and linear sloshing model. The numerical simulation results reveal that the fluid–structure interaction of liquid cargo-filled tank has a significant effect on the motion and structural response of the struck cargo tank. Compared with the calculation results of ALE FE method, the linear sloshing model underestimates the influence of fluid–structure interaction of liquid cargo tank while the Lagrangian–Eulerian finite element method may be considered as the practical method for engineering applications as it provided more reasonable results with a relatively low central processing unit (CPU) time. 相似文献
12.
A coupled numerical model considering nonlinear sloshing flows and the linear ship motions has been developed based on a boundary element method. Hydrodynamic performances of a tank containing internal fluid under regular wave excitations in sway are investigated by the present time-domain simulation model and comparative model tests. The numerical model features well the hydrodynamic performance of a tank and its internal sloshing flows obtained from the experiments. In particular, the numerical simulations of the strong nonlinear sloshing flows at the natural frequency have been validated. The influence of the excitation wave height and wave frequency on ship motions and internal sloshing has been investigated. The magnitude of the internal sloshing increases nonlinearly as the wave excitation increases. It is observed that the asymmetry of the internal sloshing relative to still water surface becomes more pronounced at higher wave excitation. The internal sloshing-induced wave elevation is found to be amplitude-modulated. The frequency of the amplitude modulation envelope is determined by the difference between the incident wave frequency and the natural frequency of the internal sloshing. Furthermore, the coupling mechanism between ship motions and internal sloshing is discussed. 相似文献
13.
Two-dimensional unsteady incompressible viscous flow around a rolling cylinder with ship-like section is numerically simulated by employing the computational scheme previously developed by the authors, in which the continuity and momentum equations are satisfied simultaneously at each time step for oscillating flow. The numerical results show that the motion of vortices around a rolling ship hull is cyclical. It is found that the location of the vortices is very similar to the existing experimental result. Using these simulation results, we can calculate the roll damping of ships including viscous effects. 相似文献
14.
Seakeeping of two ships in close proximity 总被引：1，自引：0，他引：1
Underway replenishment is an essential component of long-term naval operations. During underway replenishment, two ships travel in close proximity at moderate forward speed. This paper examines the hydrodynamic interactions that can influence seakeeping during such operations. Presented numerical predictions include the influence of interaction effects on hydrodynamic forces for two ships in waves. A scarcity of validation material for numerical predictions prompted new towing tank experiments for two ships in waves. The experiments used semi-captive models, and the numerical code was modified to include restraining forces for specified modes. The numerical predictions and experiments show that the presence of a larger ship can significantly influence the motions of a smaller ship in close proximity. 相似文献
15.
Impulse turbine, working as a typical self-rectifying turbine, is recently utilized for the oscillating water column (OWC) wave energy converters, which can rotate in the same direction under the bi-directional air flows. A numerical model established in Fluent is validated by the corresponding experimental results. The flow fields, pressure distribution and dimensionless evaluating coefficients can be calculated and analyzed. Effects of the rotor solidity varying with the change of blade number are investigated and the suitable solidity value is recommended for different flow coefficients. 相似文献
16.
Propulsion system with flexible/rigid oscillating fin 总被引：1，自引：0，他引：1
Yamamoto I. Terada Y. Nagamatu T. Imaizumi Y. 《Oceanic Engineering, IEEE Journal of》1995,20(1):23-30
The purpose of this paper is to describe the feasibility research on an oscillating fin propulsion control system as a vehicle actuator. The system is designed and constructed in order to be combined with ship models. Tank cruising tests are conducted to confirm the system's feasibility. As a result, several advantages of the oscillating fin system are found. A neural network is successfully applied for an identification of the ship model with the oscillating fin, and its effectiveness is confirmed 相似文献
17.
Real sea conditions are characterized by multidirectional sea waves. However, the prediction of hull load responses in oblique waves is a difficult problem due to numeral divergence. This paper focuses on the investigation of numerical and experimental methods of load responses of ultra-large vessels in oblique regular waves. A three dimensional nonlinear hydroelastic method is proposed. In order to numerically solve the divergence problem of time-domain motion equations in oblique waves, a proportional, integral and derivative (PID) autopilot model is applied. A tank model measurement methodology is used to conduct experiments for hydroelastic responses of a large container ship in oblique regular waves. To implement the tests, a segmented ship model and oblique wave testing system are designed and assembled. Then a series of tests corresponding to various wave headings are carried out to investigate the vibrational characteristics of the model. Finally, time-domain numerical simulations of the ship are carried out. The numerical analysis results by the presented method show good agreement with experimental results. 相似文献
18.
C.J. Garrison 《Applied Ocean Research》1984,6(1):4-15
A Green's function procedure is applied to compute the oblique wave interaction with a cylinder of arbitrary section on the free surface in water of infinite depth. Also, the hydrodynamic coefficients associated with the motion of the cylinder oscillating in its three degrees of freedom, periodic along its axis, are treated. A computer program based on the present procedure is found to be accurate and efficient. The results are applicable to the analysis of floating breakwaters, floating bridges, ship hulls and other elongated structures on a free surface. 相似文献
19.
Analysis of Wells turbine design parameters by numerical simulation of the OWC performance 总被引：1，自引：0，他引：1
This paper investigates by numerical simulation the influence of the Wells turbine aerodynamic design on the overall plant performance, as affected by the turbine peak efficiency and the range of flow rates within which the turbine can operate efficiently. The problem of matching the turbine to an oscillating water column (OWC) is illustrated by taking the wave climate and the OWC of the Azores power converter. The study was performed using a time-domain mathematical model based on linear water wave theory and on model experiments in a wave tank. Results are presented of numerical simulations considering several aerodynamic designs of the Wells turbine, with and without guide vanes, and with the use of a bypass pressure-relief valve. 相似文献
20.
The analytical method developed by Svendsen (1968) for a forced heave motion is extended to the general problem of wave induced heave, roll and sway motions of a long ship at a depth of water which is only slightly larger than the draught of the ship. This corresponds, for example, to the situation of a fully loaded ship in a harbour area.After linearization of the problem, the water motion is considered for each of the three individual motions and for the wave reflection-transmission problem for a fixed ship. The ensuing results for the forces on the ship are then synthesized to form the equations of motion, which are presented with all coefficients given, including mooring forces.Analytical and numerical results are given for the three components of motion, for the associated resonance frequencies, and for the hydrodynamic masses and moments of inertia. Finally, the assumptions used are analyzed and evaluated by comparison with measurements and with other results for a special case. 相似文献