共查询到20条相似文献，搜索用时 31 毫秒
1.
Hua Jiang 《国际地质力学数值与分析法杂志》2015,39(13):1471-1482
This study presents two three‐parameter failure criteria for cohesive‐frictional materials based on the Mohr–Coulomb failure function. One proposed failure criterion can be linked to Mogi's empirical formula and incorporates the well‐known Von‐Mises, Drucker–Prager, and Linear Mogi criteria as special cases. Another one with smooth and convex cross sections contains a general Lode dependence in the deviatoric plane and includes the Matsuoka–Nakai and Lade–Duncan Lode dependences as special cases. The effect of the intermediate principal stress on the strength of the material can be taken into account in both criteria. The proposed criteria are numerically calibrated against polyaxial data sets of many different types of rocks and concrete. The comparison results show that the performance of the proposed criteria is excellent, and the failure criterion with a general Lode dependence performs better than the other one for concrete. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
This paper presents a reformulation of the original Matsuoka–Nakai criterion for overcoming the limitations which make its use in a stress point algorithm problematic. In fact, its graphical representation in the principal stress space is not convex as it comprises more branches, plotting also in negative octants, and it does not increase monotonically as the distance of the stress point from the failure surface rises. The proposed mathematical reformulation plots as a single, convex surface, which entirely lies in the positive octant of the stress space and evaluates to a quantity which monotonically increases as the stress point moves away from the failure surface. It is an exact reproduction, and not an approximated one, of the only significant branch of the original criterion. It is also suitable for shaping in the deviatoric plane the yield and plastic potential surfaces of complex constitutive models. A very efficient numerical algorithm for the implicit integration of the proposed formulation is presented, which enables the evaluation of the stress at the end of each increment by solving a single scalar equation, both for associated and non‐associated plasticity. The algorithm can be easily adapted for other smooth surfaces with linear meridian section. Finally, a close expression of the consistent Jacobian matrix is given for achieving quadratic convergence in the external structural newton loop. It is shown that all this results in extremely fast solutions of boundary value problems. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
A generalized nonlinear failure criterion formulated in terms of stress invariants is proposed for describing the failure characteristics of different frictional materials. This failure criterion combines a power function and a versatile function in the meridian and deviatoric plane, respectively, which is a generalization of several classic criteria, including the Tresca, Drucker–Prager, Mohr–Coulomb, Lade–Duncan and Matsuoka–Nakai failure criterion. The procedure for determination of the strength parameters was demonstrated in detail. Comparisons between the failure criterion and experimental results were presented for uncemented/cemented Monterey sand, normally consolidated Fujinomori clay, rockfill, concrete, Mu-San sandstone and granite, which reveal that the proposed failure criterion captures experimental trend quite well. 相似文献
4.
The plane strain condition is a common, but polyaxial stress state for geotechnical structure designs, in which the selection of an appropriate yield or failure criterion is crucial to reasonably account for the intermediate principal stress. Under plane strain condition, a unified linear yield criterion for seven commonly used geotechnical yield criteria is presented in conjunction with the inductive method. These seven yield criteria considered in this study are the Mohr–Coulomb, Tresca, Drucker–Prager, Mogi–Coulomb, Extended Matsuoka–Nakai, Extended Lade–Duncan criteria, and the Unified Strength Theory. The generalized analytical solutions for earth pressure of retaining walls, critical load of strip foundations as well as stress and displacement of circular tunnels are derived on the basis of the proposed unified yield criterion, and their respective theoretical significance is analyzed. Thereafter, the critical load of strip foundations obtained herein is compared with two numerical results from the literature. Furthermore, the effect of strength theory on result differences of the three typical geotechnical problems by simply selecting constants, which conform to different yield criteria, is explored through a parametric study. It is found that the proposed unified yield criterion is convenient for investigating analytical solutions of the aforementioned geotechnical structures. The strength theory effect due to adopting different yield criteria is considerably significant, which cannot be ignored. Additionally, recommendations are provided on how to make use of these seven yield criteria for an optimum design. 相似文献
5.
The influence of the plastic potential on plane strain failure 总被引：1，自引：0，他引：1
The influence of the shape of the plastic potential in the deviatoric plane on plane strain collapse is investigated. The most commonly employed elastic‐perfect plastic models are considered, which adopt well‐known failure criteria for defining the yield and plastic potential surfaces, namely the von Mises, the Drucker–Prager, the Tresca, the Mohr–Coulomb and the Matsuoka–Nakai criteria. Finally, the conclusions are also extended to strain hardening/softening models. For simple constitutive models based on perfect plasticity, it is shown that the value of the Lode's angle at plastic collapse in plane strain conditions strongly depends on the specific failure surface adopted for reproducing the plastic potential surface. If the value of the Lode's angle at yield coincides with the failure value prescribed by the plastic potential, the stress–strain curves exhibit the typical perfect plastic behaviour with yield coinciding with failure, otherwise the stress changes after yield and the stress‐strain curves resemble those of strain hardening/softening models. The infinite strength which is in some situations exhibited by the Drucker–Prager model in plane strain condition is investigated and explained, and it is shown that this can also affect strain hardening/softening models. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
6.
Barodesy is a new approach to constitutive modelling of soil. It is based on Goldscheider's principles and maps stretching directions onto corresponding stress directions with the help of a simple exponential function. This mapping also determines a critical state surface in principal stress space. The article investigates this surface and relates it to the well‐known Matsuoka–Nakai failure criterion. It turns out that the difference between these two surfaces is negligible for practical applications. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
7.
In this note, a new method to calculate the equivalent Mohr–Coulomb friction angle ?′mc for cohesive and frictional materials is presented. This method makes a transformation from the failure surface for cohesive materials to the failure surface for cohesionless materials and obtains ?′mc as well as the principal stress ratio σ′1/σ′3 for cohesionless materials in the transformed space first, then obtains ?′mc for cohesive materials by linking σ′1/σ′3 in the transformed space and in the original space. In the application example, an analytical solution of the invariant stress ratio L is derived from the failure function in the transformed space. The influence of the intermediate effective principal stress σ′2 is also demonstrated using the already calculated ?′mc. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
8.
The Mohr–Coulomb, Tresca and Von Mises criteria are classical failure criteria, widely accepted and used for various materials. To take into account the influence of intermediate principal stress on the strength of soil, Bishop, Lade–Duncan and Matsuoka proposed criteria in terms of three principal stresses or three stress invariants. This note describes an expression with two parameters for modeling the shape of the failure surface in the octahedral plane. By studying the roles of these two parameters and comparing the new criterion with the aforementioned criteria, the advantage and flexibility of the proposed function is explored. Application of the function is demonstrated by fitting the new surface to experimental data for various soils. 相似文献
9.
The ground response to tunnel excavation is usually described in terms of the characteristic line of the ground (also called ‘ground response curve’, GRC), which relates the support pressure to the displacement of the tunnel wall. Under heavily squeezing conditions, very large convergences may take place, sometimes exceeding 10–20% of the excavated tunnel radius, whereas most of the existing formulations for the GRC are based on the infinitesimal deformation theory. This paper presents an exact closed‐form analytical solution for the ground response around cylindrical and spherical openings unloaded from isotropic and uniform stress states, incorporating finite deformations and linearly elastic‐perfectly plastic rock behaviour obeying the Mohr–Coulomb failure criterion with a non‐associated flow rule. Additionally, the influence of out‐of‐plane stress in the case of cylindrical cavities under plane‐strain conditions is examined. The solution is presented in the form of dimensionless design charts covering the practically relevant parameter range. Finally, an application example is included with reference to a section of the Gotthard Base tunnel crossing heavily squeezing ground. The expressions derived can be used for preliminary convergence assessments and as valuable benchmarks for finite strain numerical analyses. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
10.
In this study, upper bound finite element (FE) limit analysis is applied to stability problems of slopes using a nonlinear criterion. After formulating the upper bound analysis as the dual form of a second-order cone programming (SOCP) problem, the stress field and corresponding shear strength parameters can be determined iteratively. Thus, the nonlinear failure criterion is represented by the shear strength parameters associated with stress so that the analysis of slope stability using a nonlinear failure criterion can be transformed into the traditional upper bound method with a linear Mohr–Coulomb failure criterion. Comparison with published solutions illustrates the accuracy and feasibility of the proposed method for a simple homogeneous slope stability problem. The proposed approach is also applied to a seismic stability problem for a rockfill dam to study the influence of different failure criterions on the upper bound solutions. The results show that the seismic stability coefficients obtained using two different nonlinear failure criteria are similar but that the convergence differs significantly. 相似文献
11.
In this paper, a study is made of the generalization of constitutive models for geomaterials from two‐dimensional stress and strain states to three‐dimensional stress and strain states. Existing methods of model generalization are reviewed and their deficiencies are highlighted. A new method is proposed based on geometries of the model imprints on two normal planes. Using the proposed method, various three‐dimensional failure criterions suitable for geomaterials are implemented directly into a two‐dimensional model and the generalized model is identical to its original form for the axially symmetric condition. To demonstrate the application of the proposed method, the Modified Cam Clay model is extended using the Matsuoka–Nakai failure criterion. Simulations of soil behaviour for loading in the principal stress space are presented and analysed. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
12.
The Mohr–Coulomb (M–C) failure criterion is one of the most widely used failure criteria in rock mechanics, although it has a number of shortcomings such as neglecting the nonlinear strength observed in rock or the effect of the intermediate principal stress σ 2. Other failure criteria have been proposed to effectively include in the predictions of failure the non-linear response of rock to confinement or the effects of the intermediate principal stress. The M–C criterion is still widely used, and it is arguably the criterion most used in practice. For example, stability evaluations of shallow rock structures such as slopes and foundations are routinely carried out by estimating a friction angle and a cohesion of the rock mass. To include the dependency of cohesion and friction angle on stresses, efforts are being made to estimate equivalent values of the M–C parameters for the range of stresses applicable to a particular design. The paper suggests a new and convenient approach to find the equivalent friction angle and cohesion from any failure criterion that can be expressed in terms of the Nayak and Zienkiewicz’s stress invariants. To demonstrate the capabilities and application of the methodology, the new approach is applied to two failure criteria: the Hoek–Brown (H–B) criterion and the Hoek–Brown and Willam–Warnke (HB–WW) criterion, 2-D and 3-D failure criteria, respectively. Results from the new method, in terms of equivalent friction and cohesion for the H–B criterion, are exactly the same as the results obtained from Balmer’s theory, which confirms the validity of the new method. The predicted equivalent friction and cohesion for the HB–WW criterion show a dependency on σ 2, which does not occur for a 2-D failure criterion. 相似文献
13.
The equivalent Mohr–Coulomb (M‐C) friction angle ? (J. Geotech. Eng. 1990; 116 (6):986–999) of the extended Matsuoka–Nakai (E‐M‐N) criterion has been examined under all possible stress paths. It is shown that ? depends only on the ratio of cohesion to confining stress c′/σ and the frictional angle ?, where ? is the friction angle measured in triaxial compression (or extension) to which the E‐M‐N surface is fitted. It is also shown that ? is independent of c′, when σ=0 and of σ when c′=0, with the former representing an upper bound and the latter a lower bound of ? for any particular stress path. The closest point projection method has also been implemented successfully with the E‐M‐N criterion, and plane strain and axisymmetric element tests performed to verify some theoretical predictions relating to failure and post‐yielding behavior. Finally, a bearing capacity problem was analyzed using both E‐M‐N and M‐C, highlighting the conservative nature of M‐C for different friction angles. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
14.
Sylvain Plumey Aurelio Muttoni Laurent Vulliet Vincent Labiouse 《国际地质力学数值与分析法杂志》2011,35(9):1019-1033
This paper investigates the load‐bearing capacity of a perfectly smooth retaining wall laterally supported at both ends assuming that the wall fails by the development of three plastic hinges. The study considers the case of a cohesionless elastic–perfectly plastic backfill with a Mohr–Coulomb yield criterion and an associative flow rule in drained conditions. A kinematically admissible soil–structure failure mechanism is proposed and compared with the conventional solutions and with results from a numerical finite element modelling. The study shows that the proposed solution and the numerical solution are in good agreement. These solutions are found to be much more favourable for the wall than the conventional solutions. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
R. Baker 《国际地质力学数值与分析法杂志》2003,27(5):379-401
Most conventional slope stability calculations are based on the linear Mohr–Coulomb failure criterion. However, a substantial amount of experimental evidence suggests that failure criteria of many soils are not linear particularly in the range of small normal stresses. This departure from linearity is significant for slope stability calculations since for a wide range of practical stability problems, critical slip surfaces are shallow and normal stresses acting on such surfaces are small. There exists a technical difficulty in performing strength measurements in the range of small normal stresses relevant to such slope stability problems. As a result, in many practical situations strength measurements are performed at much larger normal stresses then those relevant for the stability problem under consideration. When this is the case, use of the Mohr–Coulomb criterion amounts to a linear extrapolation of experimental information (obtained at large normal stresses), into the range of small normal stresses, which is relevant to the problem. This extrapolation results with very significant overestimation of calculated safety factors in cases when there is large mismatch between experimental and relevant ranges of normal stresses. The present work delineates the extent of this problem and suggests a practical way to overcome it. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
16.
Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
17.
土的三重屈服面应力应变模型在国内有一定的影响力,它把土的塑性应变分成3部分,每一部分对应一个屈服面,分别为压缩屈服面、剪切屈服面和剪胀屈服面,从而在一定程度上反应了土的基本特性。但它在由三轴压缩应力状态向其它应力状态转化时,塑性系数需要重新确定,比较繁琐。而SMP准则能合理反映土的破坏特性,在国际上有一定的影响力。借用应力变换三维化方法,通过把土的三重屈服面应力应变模型和SMP准则相结合,使得原有的模型在不做任何假设的条件下,采用统一的塑性系数,由三轴压缩应力状态简单地转化到一般应力状态,并且能够考虑应变的分叉特性,能合理地预测已有的试验数据。 相似文献
18.
岩土体剪切破坏时剪切破坏角是一个一直在探讨的问题,传统理论解为Mohr-Coulomb解和Roscoe解,基于试件的宏观破坏现象受微观破坏概率的分布制约这一前提,从岩土体试件内部破坏概率分布函数的角度重新研究了这一问题。通过对试件内部微观破坏概率由微观到宏观的统计分析与坐标变换,发现在形式上破坏概率主轴即相当于主应力,并基此给出了破坏概率破坏莫尔圆。还对Mohr-Coulomb破坏准则与微观破坏概率统计之间的关系开展了探索分析,结果表明Mohr-Coulomb准则是描述试件剪切破坏时大量微破坏行为共同作用的统计结果,Weibull分布仅是岩土试件内部破坏概率分布形式的一种描述,基于数学概率推导的岩土试件破坏模型能更好的与试件的破坏准则联系起来。 相似文献
19.
An analytical solution is presented for the stress and strain fields in a Mohr–Coulomb material in plane strain around a circular hole when it is compressed by an axisymmetric far-field pressure. It is shown that several solutions arise involving one to three plastic zones depending on the values of Poisson's ratio and the friction angle. The solution chosen for presentation was obtained and used to validate the functioning of the Mohr–Coulomb yield condition that was added to the NONSAP finite element code. Stress and strain field comparisons are made. 相似文献
20.
A hypoplastic constitutive model for clays 总被引：3，自引：0，他引：3
D. Ma&#x;ín 《国际地质力学数值与分析法杂志》2005,29(4):311-336
This paper presents a new constitutive model for clays. The model is developed on the basis of generalized hypoplasticity principles, which are combined with traditional critical state soil mechanics. The positions of the isotropic normal compression line and the critical state line correspond to the Modified Cam clay model, the Matsuoka–Nakai failure surface is taken as the limit stress criterion and the non‐linear behaviour of soils with different overconsolidation ratios is governed by the generalized hypoplastic formulation. The model requires five constitutive parameters, which correspond to the parameters of the Modified Cam clay model and are simple to calibrate on the basis of standard laboratory experiments. This makes the model particularly suitable for practical applications. The basic model may be simply enhanced by the intergranular strain concept, which allows reproducing the behaviour at very small strains. The model is evaluated on the basis of high quality laboratory experiments on reconstituted London clay. Contrary to a reference hypoplastic relation, the proposed model may be applied to highly overconsolidated clays. Improvement of predictions in the small strain range at different stress levels is also demonstrated. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献