共查询到18条相似文献，搜索用时 31 毫秒
1.
海洋立管复模态动力特性分析 总被引：1，自引：0，他引：1
考虑阻尼的影响,研究海洋立管的动力特性。通过分析管内流体及管外海洋环境荷载的共同作用,建立海洋立管涡激振动偏微分方程,进而得到立管动力特性方程,用复模态分析法求解动力特性方程得到立管考虑阻尼的自振频率。算例计算表明:考虑阻尼的立管自振频率略小于不考虑阻尼的立管自振频率;立管的自振频率随着内流流速的增加而减小,但内流流速不大时,影响较小;管道长度对立管的自振频率影响较大。 相似文献
2.
针对大长细比顶张力立管内外流共同作用时涡激振动的试验研究,考虑端部铰接和固接两种边界条件,设计了可施加张力和内流的铰接支座和固接支座,并对两种支座进行数值模拟及受力分析,最后用于深水立管的涡激振动试验。立管模型材料采用6.2 m长铜管,外径20 mm,壁厚1.5 mm,分别支撑在铰接支座和固接支座上,施加不同的顶部张力、外流流速和内流流速。通过在立管表面粘贴光纤光栅应变计获得动态应变数据,分别从动态响应幅值、频率等方面对不同边界条件立管的试验数据进行对比分析,得出在顶张力、内流速相同的情况下,外流速相等时两端铰接立管的振动幅值大于两端固接立管,随着外流速的增加,两端铰接立管比两端固接立管率先发生锁振现象。 相似文献
3.
通过大长细比海洋立管物理模型试验,研究内流对其顶张力的影响。在不同的外流流速下用电子流量计读出内流流速,用动态电阻应变片测试得到顶端张力;然后直接分析内流对顶张力的影响规律。试验研究表明:内流的增加会使顶张力减小;施加的初始顶张力较大时,内流的影响较小;施加的外流较小时,内流对顶张力的影响较大。 相似文献
4.
海洋环境荷载下输液立管的静、动力特性研究 总被引：1，自引：1，他引：1
考虑管内流动流体和管外海洋环境荷载共同作用 ,建立海洋立管侧向运动微分方程。用Hermite插值函数离散 ,在微机上编写海洋立管静、动力分析程序 ,通过计算分析研究管内流体对立管侧向变形和应力的作用 ;另外 ,探讨管内流体的流动速度和立管顶端的预张力对立管动力特性的影响。结果表明 ,立管变形和应力均随管内流体流动速度增加而增大 ,同时内流速度的增大会降低立管的固有频率 ,但适当增大立管顶端预张力会抵消内流流速增加引起的固有频率下降。 相似文献
5.
驳船横荡运动下海洋立管的动力响应 总被引：1，自引：0，他引：1
海洋浮式生产系统下立管的受力情况复杂,国内的研究大多集中于两端固支或简支的情况。本文则以水面驳船的横荡运动作为立管上端的动力边界条件,将Matteo Luca Facchinetti的尾流振子模型与考虑外流涡激振动作用下海洋立管运动微分方程相结合,得到管道与流体的耦合振动方程,用Hermit插值函数将方程进行有限元离散,并用Newmark时程分析法及迭代法求解,得到管道各点的位移时程曲线。结果表明:立管的振动频率主要由上端驳船的运动频率所确定,随着驳船运动频率的增加,立管中点的位移幅值先增加后减小;在有动边界存在的条件下,改变外流流速对立管中点的位移幅值影响不大。 相似文献
6.
海洋立管抑振装置优化布置的实验研究 总被引：1，自引：0，他引：1
设计1种梯形截面的三螺旋导板抑振装置,在实验室大型水槽进行海洋立管涡激振动实验.通过改变这种抑振装置的覆盖方式和覆盖范围,研究梯形截面螺旋导板的不同覆盖方式和覆盖范围对抑制海洋立管涡激振动的作用.实验时用动态电阻应变仪采集立管模型横向和顺流向的动态响应数据,并利用雨流计数法对模型进行疲劳分析.实验结果表明:在外流流速相同的条件下,三螺旋导板各种覆盖方案对涡激振动都有抑制作用;随着螺旋导板覆盖率的增加,立管的振动减弱,疲劳寿命增加;覆盖螺旋导板的立管顺流向振动频率明显降低,横向振动频率当覆盖率较高时有所降低,覆盖率较低时基本没有变化. 相似文献
7.
海洋立管的涡激振动会对立管结构的疲劳寿命产生严重的影响。提出1种月牙肋抑振装置,通过在室内水槽中进行物理模型试验,研究该装置在涡激振动情况下对立管的抑振作用。测得该装置在立管表面不同布置方式时顺流向及横流向振动的应变时程曲线,使用DASP软件对所测数据进行分析处理,得到立管的振动幅值和功率谱。试验结果表明:这种月牙肋抑振装置可明显降低立管模型的振动幅值,且对振动频率有一定的影响,同时也表明不同的布置方式对立管的抑振效果也不相同。 相似文献
8.
海洋输流立管耦合动力分析 总被引：1，自引：1，他引：0
综合考虑黏性内流以及立管轴向和流向的耦合效应等多种因素对立管动力响应的影响,基于Hamilton原理推导得出海洋立管耦合振动方程,采用Galerkin法进行数值求解。首先分析波流载荷与平台运动联合激励和仅在平台运动作用下立管动力响应的差异,然后讨论黏性内流和顶部张力对立管动力特性和响应峰值的影响。计算结果表明:波流与平台运动耦合作用和仅在平台运动作用下的立管各阶振动模态和振动峰值存在明显差异,波浪和海流对立管的直接作用不可忽略;内流运动黏性会改变立管振型峰值,立管流向一阶固有频率随内流流速增大而减小,流向和垂向振动峰值分别随之增加和减小,但这种影响很有限,且可以通过增大立管顶部预张力来抵消。 相似文献
9.
《中国海洋大学学报(自然科学版)》2010,(Z1)
基于MATLAB开发海洋立管涡激振动数值模拟系统NSVIV 1.0,系统采用尾流振子模型模拟外流对立管结构的作用,考虑内流对立管结构的影响,对立管的涡激振动动力响应和疲劳寿命进行预测分析。系统界面简洁清晰,使用方便,适用于顶张力立管,为进一步集成功能齐全的海洋立管设计分析软件打下基础。 相似文献
10.
管内流动会影响输流管的振动响应,目前关于输流弹性管涡激振动方面的研究较少。基于计算流体力学(CFD)方法,开展内外流对细长输流弹性管振动特性影响的研究。首先在不考虑内流的情况下将弹性管涡激振动数值预报结果与模型试验数据进行对比,验证了数值方法的可靠性。再者考虑内外流耦合作用情况下,对不同内流流速下细长输流弹性管振动位移时—空分布、顺流向最大平均偏移、振动轨迹、内部横向涡的形成与分布等进行了对比分析。结果发现,与外流流速相比,内流流速的增加虽然难以改变弹性管的主振模态,但对沿管体的振动强度影响显著。顺流向最大偏移处管体运动轨迹发生明显的变形和跳跃。在剪切外流和均匀内流对弹性管的联合作用下,沿管跨方向模态间能量转换频繁,伴随着间歇性出现或消失的沿弹性管传播的行波组分,这主要归因于复杂的双重流固耦合系统(外流—管体,内流—管体)。在内流以附加质量力、离心力和科氏力形式的激励下,弹性管内二次流现象明显。在振动过程中,内部横向涡沿管壁生成、脱落并逐渐散布于整个横截面。 相似文献
11.
In order to study the effect of internal flow on vortex-induced vibration of flexible riser, the experiment on the vortex-induced vibration of flexible riser transporting fluid in the current was conducted in the physical oceanography laboratory of Ocean University of China. Considering the internal flowing fluid and external marine environment, the dynamic response of the flexible riser was measured. The corresponding numerical simulation was performed using the wake oscillatory model considering the extensibility of the riser system. Both the experiment and the numerical simulation indicated that with the increase of internal flow speed, the response amplitude increases, while the response frequency decreases. 相似文献
12.
The vortex-induced vibration test of the deep-sea riser was carried out with different excitation water depths in the wave-current combined water flume.By dimensionally changing the multi-stage water depth and hydrodynamic parameters such as outflow velocity at various water depths,the dynamic response parameters such as dominant frequency,dimensionless displacement and vibration trajectory evolution process of the riser under different excitation water depths were explored to reveal the sensitive characteristics of the dynamic response of vortexinduced vibration of the risers under different excitation water depths.The results show that different excitation water depths will change the additional mass of the riser and the fluid damping and other parameters,which will affect the spatial correlation and stability of the vortex shedding behind the riser.In the lock-in region,the distribution range of the characteristic frequency becomes narrow and centered on the lock-in frequency.The increase of the excitation water depth gradually advances the starting point of the lock-in region of the riser,and at the same time promotes the excitation of the higher-order vibration frequency of the riser structure.Within the dimensionless excitation water depth,the dominant frequency and dimensionless displacement are highly insensitive to the excitation water depth at high flow velocity.The change of the excitation water depth will interfere with the correlation of the non-linear coupling of the riser.The“8-shaped”gradually becomes irregular,and the vibration trajectories of the riser show“O-shape”,“X-shape”and“Crescent-shape”. 相似文献
13.
Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed. 相似文献
14.
Dynamic and static analysis of a marine riser 总被引：1，自引：0，他引：1
A frequency domain normal mode solution is presented for the dynamic response of an unbuoyed marine riser subjected to periodic excitation from a surface vessel in the direction of wave propagation. The variable tension beam-column equation is solved in terms of normal modes of free vibration of the riser and the rigid body displacement. Drag forces on the riser are represented by Morison's formula taking account of the velocity of the riser and wave-induced fluid velocity. A periodic solution for the flexural motion of the riser and the bending stress is then obtained by means of an iterative solution of the frequency response function. The drag force induced stresses arising from a linearly varying current are also determined. The results presented compare favourably with those obtained by other methods. 相似文献
15.
基于控制尾流,阻止立管尾流漩涡脱落转换路径的涡激振动抑制机理,设计三角形尾翼、片状尾翼及交错尾翼等三种抑振装置。三种抑振装置分别安装于立管模型表面,立管模型采用外径为18 mm的透明有机玻璃管。通过在均匀流场中进行安装有该抑振装置的立管模型涡激振动试验,研究三种抑振装置对立管涡激振动的抑制效率,并通过与配重裸管的涡激振动数据对比,分析抑振装置对立管动力响应的影响规律。研究结果表明,三种抑振装置均取得了明显的抑振效果,与配重裸管相比,安装片状尾翼及交错尾翼的立管模型抑制效率可达90%以上,安装三角形尾翼后立管模型振动频率略有减小,而安装片状尾翼及交错尾翼的立管模型没有明显的主导频率。 相似文献
16.
An experimental investigation was conducted on a flexible riser with and without various strake arrangements. The aim of the present work was to further improve the understanding of the response performance of the vortex-induced vibration (VIV) of a riser with helical strakes. Two current profiles, including uniform and linearly sheared flows, were simulated. The uniform current was simulated by towing the riser model in one direction using the towing carriage, and the linearly sheared current was simulated by fixing one end of the riser and using a driven cantilever to traverse a circular arc. Based on the modal superposition method, the displacement responses were obtained from the measured strain. Strakes with different heights and pitches were analysed, and response parameters such as the displacement response and fatigue damage were studied. The results of the bare model test show that the lock-in phenomenon displays multi-order characteristics, and the VIV displacement decreases with an increased order of the lock-in regime. The results of the straked model test indicate that the response characteristics of a bare riser can be quite distinct from those of a riser with helical strakes, and the response performance depends closely on the geometry of the strake configuration. 相似文献
17.
《中国海洋工程》2015,(5)
Steel catenary riser(SCR) is the transmission device between the seabed and the floating production facilities. As developments move into deeper water, the fatigue life of the riser can become critical to the whole production system, especially due to the vortex-induced vibration(VIV), which is the key factor to operational longevity. As a result, experimental investigation about VIV of the riser was performed in a large plane pool which is 60 m long, 36 m wide and 6.5 m deep. Experiments were developed to study the influence of current speed and seabed on VIV of SCR. The results show that amplitudes of strain and response frequencies increase with the current speed both in cross-flow(CF) and in-line(IL). When the current speed is high, multi-mode response is observed in the VIV motion. The amplitudes of strain in IL direction are not much smaller than those in CF direction. The seabed has influence on the response frequencies of riser and the positions of damage for riser. 相似文献
18.
Steel catenary riser (SCR) is the transmission device between the seabed and the floating production facilities. As developments move into deeper water, the fatigue life of the riser can become critical to the whole production system, especially due to the vortex-induced vibration (VIV), which is the key factor to operational longevity. As a result, experimental investigation about VIV of the riser was performed in a large plane pool which is 60 m long, 36 m wide and 6.5 m deep. Experiments were developed to study the influence of current speed and seabed on VIV of SCR. The results show that amplitudes of strain and response frequencies increase with the current speed both in cross-flow (CF) and in-line (IL). When the current speed is high, multi-mode response is observed in the VIV motion. The amplitudes of strain in IL direction are not much smaller than those in CF direction. The seabed has influence on the response frequencies of riser and the positions of damage for riser. 相似文献