共查询到20条相似文献，搜索用时 109 毫秒
1.
为研究海洋立管涡激振动响应并预测其疲劳寿命,在中国海洋大学物理海洋实验室大型风-浪-流水槽进行海洋立管涡激振动模型试验.考虑管内流体的流动,运用相似理论将实际海洋立管缩放为试验模型,施加不同流速的外流,测得立管在涡旋脱落时顺流向及横向振动的应变时程曲线,根据实测结果,采用Miner理论对立管进行疲劳寿命分析.结果表明:立管横向振动比顺流向振动强烈,大约高一个数量级;随骀着外流流速的增加,管道横向及顺流向振动明显增加,立管的疲劳寿命降低;立管中部及端部振动比较强烈,疲劳寿命较其它位置处低,容易发生疲劳破坏. 相似文献
2.
考虑流固耦合时的海底管道悬跨段非线性动力分析 总被引：6，自引：0，他引：6
通过对管道的涡激振动试验,提出了考虑流固耦合的非线性涡激升力表达式,并用该式进行了海底管线悬跨段非线性动力响应时程分析。对考虑流固耦合与未考虑流固耦合情况下得到的管道动力响应时程进行对比,算例表明:当管外流场流速与管道顺流向振动速度值较接近时,不考虑流固耦合时的计算结果明显小于考虑流固耦合时的计算结果。分析认为,在管外流场流速与管道顺流向振动速度值较接近的情况下,管道的涡激振动计算宜采用非线性涡激力模型。 相似文献
3.
海洋立管抑振装置优化布置的实验研究 总被引：1，自引：0，他引：1
设计1种梯形截面的三螺旋导板抑振装置,在实验室大型水槽进行海洋立管涡激振动实验.通过改变这种抑振装置的覆盖方式和覆盖范围,研究梯形截面螺旋导板的不同覆盖方式和覆盖范围对抑制海洋立管涡激振动的作用.实验时用动态电阻应变仪采集立管模型横向和顺流向的动态响应数据,并利用雨流计数法对模型进行疲劳分析.实验结果表明:在外流流速相同的条件下,三螺旋导板各种覆盖方案对涡激振动都有抑制作用;随着螺旋导板覆盖率的增加,立管的振动减弱,疲劳寿命增加;覆盖螺旋导板的立管顺流向振动频率明显降低,横向振动频率当覆盖率较高时有所降低,覆盖率较低时基本没有变化. 相似文献
4.
针对大长细比顶张力立管内外流共同作用时涡激振动的试验研究,考虑端部铰接和固接两种边界条件,设计了可施加张力和内流的铰接支座和固接支座,并对两种支座进行数值模拟及受力分析,最后用于深水立管的涡激振动试验。立管模型材料采用6.2 m长铜管,外径20 mm,壁厚1.5 mm,分别支撑在铰接支座和固接支座上,施加不同的顶部张力、外流流速和内流流速。通过在立管表面粘贴光纤光栅应变计获得动态应变数据,分别从动态响应幅值、频率等方面对不同边界条件立管的试验数据进行对比分析,得出在顶张力、内流速相同的情况下,外流速相等时两端铰接立管的振动幅值大于两端固接立管,随着外流速的增加,两端铰接立管比两端固接立管率先发生锁振现象。 相似文献
5.
海底管道管跨段在内外流体作用下的竖向动力特性研究 总被引：2，自引：0，他引：2
根据在复杂的海洋环境条件下，管道的动力特性受到内外流体的综合作用影响，呈现与陆地管道不同的特点。研究了结构受到外界流体所产生的涡激作用，同时考虑管内恒定流的影响，利用有限元方法对海底管道管跨段竖向振动的微分方程进行求解。在此基础上得出了管跨段在不同外流流速情况下，内流流速与结构动力响应幅值的关系及其对管跨段振动频率的影响，并进一步探讨了管跨失稳时的极限管内流速与跨长的关系，这些结论对于海底管道设计具有一定实际指导意义。 相似文献
6.
悬跨海底电缆作为细长柔性结构,在静力平衡状态下具有一定的垂度,在水流作用下的涡激振动特性与海底管线和海洋立管等结构也有很大的不同,其振动模态受垂跨比影响很大。通过物理模型试验开展了不同垂跨比下悬跨海缆的涡激振动和疲劳损伤特性研究。试验模型按照水弹性相似准则设计,试验中测量了不同流速下海缆模型产生涡激振动时的应变历时数据,采用模态分析法获得了模型涡激振动时的振动模态和振幅。分析了不同流速下海缆模型的振动模态、应变和疲劳损伤的变化和分布特征。试验结果表明：垂跨比显著影响了海缆的涡激振动模态和应变幅值大小。在本试验流速范围内,对一定长度的悬跨海缆模型,当垂跨比较大时,随着流速的增大,模型涡激振动的主响应振动依次出现反对称1阶和对称1阶模态;当垂跨比较小时,模型涡激振动的主响应模态依次出现反对称1阶和对称2阶模态。当涡激振动主响应模态为反对称1阶时,疲劳损伤最大值达到0. 1~0.7。 相似文献
7.
深海柔性立管涡激振动问题广受关注,其中多立管涡激振动较传统单立管涡激振动更为复杂。使用基于Open FOAM自主开发的深海柔性立管流固耦合求解器viv-FOAM-SJTU,对阶梯流中串列双立管涡激振动展开研究。首先针对阶梯流中串列双立管模型试验工况开展验证计算,下游立管的位移响应以及频率响应与试验结果基本吻合;而后改变立管浸没长度,分别选取浸没长度为0.4L(工况1)、0.55L(工况2)以及0.7L(工况3)的三种工况进行数值计算,其中L为立管长度。数值结果表明:3种浸没长度下,上下游立管的横流向振动均为一阶模态,且工况2和工况3中上下游立管的横流向位移均方根均大于工况1;上下游立管的顺流向主振模态在工况2和工况3中均为二阶,而在工况1中为一阶,且下游立管在工况2和工况3中的顺流向振动均表现出明显的多模态振动特性。 相似文献
8.
9.
海洋立管复模态动力特性分析 总被引：1，自引：0，他引：1
考虑阻尼的影响,研究海洋立管的动力特性。通过分析管内流体及管外海洋环境荷载的共同作用,建立海洋立管涡激振动偏微分方程,进而得到立管动力特性方程,用复模态分析法求解动力特性方程得到立管考虑阻尼的自振频率。算例计算表明:考虑阻尼的立管自振频率略小于不考虑阻尼的立管自振频率;立管的自振频率随着内流流速的增加而减小,但内流流速不大时,影响较小;管道长度对立管的自振频率影响较大。 相似文献
10.
大长细比柔性杆件涡激振动实验 总被引：3，自引：1，他引：2
涡激振动(vortex-induced vibration,VIV)是导致深海细长柔性立管发生疲劳破坏的重要因素。采用实验观测手段研究了长细比为1 750的柔性立管多模态涡激振动特性。实验中,通过采用拖车拖拉立管模型在水池中匀速行进来模拟均匀流作用下的涡激振动响应。利用光纤光栅传感器测量立管模型在横流向(cross-flow,CF)和顺流向(in-line,IL)的应变,进而通过模态分解的方法,获得立管模型涡激振动的位移。在此基础上,研究了CF以及IL方向的响应频率、位移标准差的平均值和最大值等随流速的变化规律,并分析了立管模型上测点的运动轨迹及其影响因素。 相似文献
11.
Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed. 相似文献
12.
Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow. 相似文献
13.
The dynamic characteristics of marine risers/pipes often present serried modes with various frequencies due to high levels of structural flexibility and slenderness, especially when the flow velocity is non-uniformly distributed along the span. Therefore, the vortex-induced vibration (hence VIV) for slender risers/pipes is usually characterized by multi-mode motions. In this paper, by means of a newly developed empirical mode decomposition (EMD) method which contributes to more efficient instantaneous multi-mode identification and analysis, new characteristics of a multi-mode “lock-in” vibration process of a large-scale flexible pipe subject to shear flow were discussed. Because the two-degree vibration along the span can be analyzed simultaneously, the effects of multi-mode VIV were investigated systematically. From the given illustrative examples, it was found that the vibration energy diffusion between the fluid and the structure, and among the participating modes, may be repeatable and reversible, or even irreversible, which causes VIV to be highly intricate. The coexistence of multiple modes, energy transfer, and mode switching/jump is observed when the reduced velocity is relatively high. The multi-dominant mode phenomenon is also found in both cross-flow (CF) and in-line (IL) VIVs. Energy transfers between the CF and IL directions occasionally occur, and CF VIV is apt to dominate the vibration process, because it is superior to IL VIV with the increment of the reduced velocity. 相似文献
14.
We report a theoretical investigation of an elastic and slender fluid-conveying pipe with a top-end excitation subjected to uniform cross flows. Considering the mean drag force and the time varying vortex-induced lift force which is modeled using a nonlinear van der Pol oscillator, the nonlinear partial differential equations of the motion of coupled fluid-structure system are constructed and simplified to a reduced-order model through the Galerkin-type discretization. By virtue of quasi-static displacement conditions, the characteristics of vortex-induced vibration of the pipe are evaluated for the first two lock-in modes. The results show that the top-end excitation can increase the vibration amplitude of the pipe when the cross-flow speed is out of the lock-in regions. When the cross-flow speed is within the lock-in region, however, the top-end oscillation causes a transition between quasi-periodic and periodic in the responses of the pipe, significantly reducing or increasing the vibration amplitudes depending on the excitation acceleration and frequency. This finding has an important guidance in suppressing vortex-induced vibrations by balancing the internal fluid velocity and the top-end excitation. 相似文献
15.
Ji-ning Song Lin Lu Bin Teng Han-il Park Guo-qiang Tang Hao Wu 《Ocean Engineering》2011,38(11-12):1308-1322
Laboratory tests have been conducted on vortex-induced vibration (VIV) of a long flexible riser towed horizontally in a wave basin. The riser model has an external diameter of 16 mm and a total length of 28.0 m giving an aspect ratio of about 1750. Reynolds numbers ranged from about 3000 to 10,000. Fiber optic grating strain gages are adopted to measure the dynamic response in both cross-flow and in-line directions. The cross-flow vibrations were observed to vibrate at modes up to 6 and the in-line reached up to 12. The fundamental response frequencies can be predicted by a Strouhal number of about 0.18. Multi-mode responses and the asymmetry of the bare pipe response in uniform flow were observed and analyzed. The experimental results confirmed that the riser pipe vibrated multi-modally despite it being subject to a uniform current profile and all of the excited modes vibrated at the Strouhal frequency. The asymmetrical distribution of displacement mainly resulted from the modal composition. Higher harmonics of the VIV response such as the third, fourth and fifth harmonics frequencies were found to be steady over the entire duration of the test even if they varied along the length of the riser pipe. 相似文献
16.
Experimental Study on Coupled Cross-Flow and in-Line Vortex-Induced Vibration of Flexible Risers 总被引：1，自引：1，他引：0
In this work, we study the coupled cross-flow and in-line vortex-induced vibration （VIV） of a fixedly mounted flexible pipe, which is free to move in cross-flow （ Y- ） and in-line （ X- ） direction in a fluid flow where the mass and natural frequencies are precisely the same in both X- and Y-direction. The fluid speed varies from low to high with the corresponding vortex shedding frequency varying from below the first natural frequency to above the second natural frequency of the flexible pipe. Particular emphasis was placed on the investigation of the relationship between in-line and cross-flow vibration. The experimental results analyzed by using these measurements exhibits several valuable features. 相似文献
17.
It is expected that the vortex-induced vibration response of long flexible tubular structures exposed to a shear current will consist of multiple modes of standing and traveling waves simultaneously. The vibration characteristics of traveling wave caused by VIV and its effect on the vibration form for a flexible pipe model are presented in this paper. Two methods are proposed to reveal the characteristics of standing and traveling waves from the perspective of an instantaneous illustration and a time-averaged statistical analysis separately. The first is associated with the adoption of an illustration method depending upon an instantaneous local upper envelope to identify the dominance of the standing or traveling wave. It is found that the in-line and cross-flow wave types show synchronization in that the wave types are mostly changeless or occasionally transform from one type to the other nearly simultaneously. In both the in-line and cross-flow directions, it is evident that the vibration response is not dominated by the standing wave characteristics but can often be characterized by the alternate presence of a traveling wave and a hybrid standing-traveling wave. The second method is associated with the adoption of the significant strain peak concept proposed to estimate the occurrence of the peak strain response and fatigue damage risk. It is found that the strain peak value attributed to in-line static strain accounts for a large proportion of the final equivalent significant strain peak near the pipe end with high reduced velocities, especially when the flow velocity is high. With the occurrence of a hybrid pattern of standing-traveling wave for higher velocities, the distribution of the significant cross-flow strain peak becomes uniform and its corresponding wave shape is apt to be flat. 相似文献
18.
深海悬垂取水管的设计趋向于大直径、高内流流速,内流对取水管振动特性的影响不可忽略,分析内部流动引起的管道动态失稳行为以及评估失稳临界流速具有重要工程意义。基于小尺度模型试验,研究内流对深海悬垂取水管道振动特性的影响规律,结果表明：随着内流流速增加,取水管模型会发生动态失稳行为,表现为一种间歇性的近周期运动,该运动主要由管道一阶弯曲模态引起的不稳定性诱导。管道材料、顶端连接方式及底部配重块均影响其动态稳定性,顶端固定连接时质量比小的管道更易发生动态失稳;顶端变为铰接时,质量比大的管道失稳临界流速变小,质量比小的管道失稳临界流速变大。相比顶端边界条件,底部配重块对管道失稳临界流速影响不显著但可以减小其振动幅值。 相似文献
19.
In order to study the effect of internal flow on vortex-induced vibration of flexible riser, the experiment on the vortex-induced vibration of flexible riser transporting fluid in the current was conducted in the physical oceanography laboratory of Ocean University of China. Considering the internal flowing fluid and external marine environment, the dynamic response of the flexible riser was measured. The corresponding numerical simulation was performed using the wake oscillatory model considering the extensibility of the riser system. Both the experiment and the numerical simulation indicated that with the increase of internal flow speed, the response amplitude increases, while the response frequency decreases. 相似文献
20.
A mechanistic study is performed to examine the coupling between the in-line and the cross-flow motion of a cylindrical structure subjected to current forces. The structure represents a free span pipeline but concerns marine risers as well.A time domain model is formulated in which the in-line and cross-flow deflections are coupled through the axial tension which in turn is computed from the pipeline prolongation at any time. This formulation introduces time dependent tensions and non-linearity into the problem.Preliminary validation of the model simulations vs. physical test data are carried out for one specific case to ensure that the sag and the in-line deflection are correctly resolved by the model. Using this as the initial condition a series of calculations are carried out to examine cross-flow induced deflections induced by an in-line prescribed deflection and vice versa. Finally, an idealistic simulation of flow induced vibration is presented.The model simulations demonstrate that the coupling varies with the mode shape and with which component it is initially introduced into. However, it is evident that the coupling effects may be significant and not negligible. 相似文献