共查询到20条相似文献，搜索用时 281 毫秒
1.
Clayey rocks are frequently chosen as a geological barrier material for underground repositories. The inherent anisotropic mechanical behavior and the evolution of mechanical behavior with water content are two crucial material properties for the safety analysis of these structures. The present paper focuses on numerical modeling of the inherent anisotropy and the effect of water content, as well as the interactions of these properties in partially saturated clayey rocks with preferably oriented bedding planes. A discrete thermodynamic approach is adopted for describing the inherent anisotropic mechanical behavior, and the anisotropy of the elastic parameters, plastic evolution and damage evolution are considered. Capillary pressure is introduced to describe the effect of the water content with the help of the effective stress concept, and a procedure for the identification of the model parameters is presented. Finally, the proposed model is applied to a study of triaxial compression tests of argillite with different orientations of the bedding planes and variable water content. In summary, the main features of the studied material are well reproduced by the model. 相似文献
2.
Numerical models of ionic diffusion in one and three dimensions: application to dehydration of mantle olivine 总被引：1，自引：0，他引：1
The hydrogen content of nominally anhydrous minerals is of great interest, because it can influence many physical and mechanical properties of mantle rocks. Moreover, the hydrogen diffusion profiles can be used to constrain timescales related to magma eruptions. Here, we report models of ionic diffusion for trace elements in anisotropic crystals and apply them to hydrogen diffusing out of mantle-derived olivine. We first compare and discuss the characteristics of 1D and 3D models and show that only 3D anisotropic diffusion models can lead to diffusion profiles exhibiting non-equilibrium plateau at the center of the solid along the slowest axis, as measured in natural samples. In a second part, we discuss the differences between hydration and dehydration of olivine for diffusion that is linked to two different atomic sites involved in hydrogen mobility. Finally, we apply our 3D anisotropic model to previous results on mantle-derived olivine from Pali-aike to better characterize diffusion coefficients and their anisotropy that could be relevant for dehydration of olivine. Our results show that dehydration has to be strongly anisotropic, with a fast [100] axis and a significantly slower [001] axis. 相似文献
3.
The anisotropy effect is exhibited more prominently in sedimentary depositions, and it relates the soil’s mechanical specifications to the directions of imposed loads. Even though this phenomenon has been comprehensively explored in silica sands, few research has been conducted for studying the anisotropic behavior of marine carbonate sands. To bridge this gap, the present study investigates the anisotropy effect on the mechanical behavior of Bushehr carbonate sand acquired from the north shelf of the Persian Gulf in Iran. Toward this end, some undrained principal stress rotation tests are conducted using a hollow cylinder shear torsional apparatus in such a manner that the direction of the applied principal stresses are fixed along a desired orientation and the total mean stress and intermediate principal stress ratio are kept constant. Furthermore, prior to shearing, the samples are consolidated under three confining pressures and two isotropic and anisotropic states. The results show that dilative behavior is observed in all loading directions after initial contraction; this contradicts the response observed in silica sands. The anisotropy response of soil follows two different trends in the contractive and dilative phases. The relation of soil’s mechanical properties shows a descending trend with the angle of maximum principal stress in the contractive phase; on the other hand, the anisotropy behavior shows a dominant parabola trend in the dilative phase, where the maximum ultimate pore pressure and minimum soil strength occur in the stress direction with an angle of α?=?30°. By increasing the confining pressure in the soil element, the intensity of the anisotropy in some mechanical properties except the soil deformation is reduced. Furthermore, the deviatoric-to-effective mean stress ratio in the phase transformation state from contraction to dilation is independent of the loading direction and consolidation stress state, and it is considered one of the intrinsic properties of sand. 相似文献
4.
相同形貌结构面重复性剪切试验和各向异性剪切试验一直是岩体结构面剪切力学特性试验研究中的难点,而该问题对于工程岩体的开挖力学响应和稳定性分析、评价与控制至关重要,问题的关键在于同一种岩石的结构面形貌的再现。为此,基于3D扫描和3D雕刻技术,重复制备了3种不同粗糙度的大理岩结构面试样,开展了不同法向应力下相同形貌结构面的各向异性剪切试验。试验结果发现：（1）同一法向应力、不同剪切方向下,相同形貌结构面的剪切强度、剪胀和剪切破坏特征均呈现明显各向异性;（2）结构面粗糙度各向异性很大程度上决定了剪切强度的各向异性,两者具有较好的正相关性;（3）随着法向应力的升高,结构面剪切特征的各向异性有逐渐弱化的趋势。同时,研究还充分表明,3D雕刻技术是系统开展结构面剪切力学特征各向异性研究的可靠手段,可在将来研究中发挥更为重要的作用。 相似文献
5.
Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading 
下载免费PDF全文
下载免费PDF全文 A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
由于加荷方式不同,土体在复杂应力状态下在各主应力方向上应力-应变关系表现出显著应力各向异性,在常规三轴试验基础上,采用经典弹塑性理论各向同性土体模型对此不能合理描述。通过真三轴试验,总结应力各向异性柔度矩阵规律,结合试验规律进行相应理论研究,用非线性各向异性弹性矩阵代替弹塑性模型的弹性矩阵,用具有各向异性屈服准则的弹塑性模型描述塑性部分,建立非线性各向异性弹性-塑性模型,可以改善柔度矩阵矩阵形态,反映复杂应力状态下土体应力各向异性特征。 相似文献
7.
Existing solutions to Mandel's problem focus on isotropic, transversely isotropic, and orthotropic materials, the last two of which have one of the material symmetry axes coincide with the vertical loading direction. The classical plane strain condition holds for all these cases. In this work, analytical solution to Mandel's problem with the most general matrix anisotropy is presented. This newly derived analytical solution for fully anisotropic materials has all the three nonzero shear strains. Warping occurs in the cross sections, and a generalized plane strain condition is fulfilled. This solution can be applied to transversely isotropic and orthotropic materials whose material symmetry axes are not aligned with the vertical loading direction. It is the first analytical poroelastic solution considering mechanical general anisotropy of elasticity. The solution captures the effects of material anisotropy and the deviation of the material symmetry axes from the vertical loading direction on the responses of pore pressure, stress, strain, and displacement. It can be used to match, calibrate, and simulate experimental results to estimate anisotropic poromechanical parameters. This generalized solution is capable of reproducing the existing solutions as special cases. As an application, the solution is used to study the responses of transversely isotropic and orthotropic materials whose symmetry axes are not aligned with the vertical loading direction. Examples on anisotropic shale rocks show that the effects of material anisotropy are significant. Mandel-Cryer's effects are highly impacted by the degree of material anisotropy and the deviation of the material symmetry axes from the vertical loading direction. 相似文献
8.
An anisotropic geomechanical model for jointed rock mass is presented. Simultaneously with deriving the orthotropic anisotropy elastic parameters along the positive axis, the equivalent compliance matrix for the deflection axis orthotropic anisotropy was derived through a three-dimensional coordinate transformation. In addition, Singh’s analysis of the stress concentration effects of intermittent joints was adopted, based on two groups of intermittent joints and a set of cross-cutting joints in the jointed rock mass. The stress concentration effects caused by intermittent joints and the coupling effect of cross-cutting joints along the deflection-axis are also considered. The proposed anisotropic mechanics parameters method is applied to determine the deformation parameters of jointed granite at the Taishan Nuclear Power Station. Combined with the deterministic mechanical parameters of rock blocks and joints, the deformation parameters and their variability in jointed rock masses are estimated quantitatively. The computed results show that jointed granite at the Taishan Nuclear Power Station exhibits typical anisotropic mechanical characteristics; the elastic moduli in the two horizontal directions were similar, but the elastic modulus in the vertical direction was much greater. Jointed rock elastic moduli in the two horizontal and vertical directions were respectively about 24% and 37% of the core of rock, showing weakly orthotropic anisotropy; the ratio of elastic moduli in the vertical and horizontal directions was 1.53, clearly indicating the transversely isotropic rock mass mechanical characteristics. The method can be popularized to solve other rock mechanics problems in nuclear power engineering. 相似文献
9.
It is well known that soil is inherently anisotropic and its mechanical behavior is significantly influenced by its fabric anisotropy. Hypoplasticity is increasingly being accepted in the constitutive modeling for soils, in which many salient features, such as nonlinear stress-strain relations, dilatancy, and critical state failure, can be described by a single tensorial equation. However, within the framework of hypoplasticity, modeling fabric anisotropy remains challenging, as the fabric and its evolution are often vaguely assumed without a sound basis. This paper presents a hypoplastic constitutive model for granular soils based on the newly developed anisotropic critical state theory, in which the conditions of fabric anisotropy are concurrently satisfied along with the traditional conditions at the critical state. A deviatoric fabric tensor is introduced into the Gudehus-Bauer hypoplastic model, and a scalar-valued anisotropic state variable signifying the interplay between the fabric and the stress state is used to characterize its impact on the dilatancy and strength of the soils. In addition, fabric evolution during shearing can explicitly be addressed. Modifications have also been undertaken to improve the performance of the undrained response of the model. The anisotropic hypoplastic model can simulate experimental tests for sand under various combinations of principle stress direction, intermediate principal stress (or mode of shearing), soil densities, and confining pressures, and the associated drastic effect of different principal stress orientations in reference to the material axes of anisotropy can be well captured. 相似文献
10.
Stress-induced evolution of anisotropic thermal conductivity of dry granular materials 总被引：1，自引：1，他引：0
Jinhyun Choo Young Jin Kim Jung Hwoon Lee Tae Sup Yun Jangguen Lee Young Seok Kim 《Acta Geotechnica》2013,8(1):91-106
Various factors, such as the volumetric fraction of constituents, mineralogy, and pore fluids, affect heat flow in granular materials. Although the stress applied on granular materials controls the formation of major pathways for heat flow, few studies have focused on a detailed investigation of its significance with regard to the thermal conductivity and anisotropy of the materials. This paper presents a numerical investigation of the stress-induced evolution of anisotropic thermal conductivity of dry granular materials with supplementary experimental results. Granular materials under a variety of stress conditions in element testing are analyzed by the three-dimensional discrete element method, and quantitative variations in their anisotropic effective thermal conductivity are calculated via the network model and conductivity tensor measurements. Results show that the directional development of contact area and fabric under anisotropic stress conditions leads to the evolution of anisotropy in thermal conductivity. The anisotropy induced in thermal conductivity by shear stress is higher than that induced by compressive stress because shear stress causes more significant changes in microstructural configurations and boundary conditions. The shear-stress-induced evolution of anisotropy between principal thermal conductivities depends on dilatancy as well as shearing mode, and the shear-driven discontinuity localizes the conductivity. Factors involved in the stress-induced evolution and their implications on the thermal conductivity characterization are discussed. 相似文献
11.
12.
人工制备初始应力各向异性结构性土方法探讨 总被引：1，自引：0，他引：1
通过对结构性黏土的研究可以掌握天然土受荷过程中的变形破坏过程,从而为考虑土结构性的结构物的设计、地基加固等提供依据。近年来随着高、深和大型建筑的兴建,结构性黏土的研究变得尤为重要。天然土都具有结构性和各向异性。发展了一种能够考虑初始应力各向异性影响的结构性土的人工制样方法。通过对原料粉质黏土中添加水泥形成颗粒之间的胶结作用,添加盐粒并溶解后形成大孔隙组构分布和在水化过程中的侧限应力状态的结构性土样的端部施加竖向荷载,从而人工制备了具有初始应力各向异性的结构性土样。然后对初始均质结构性土样、初始应力各向异性结构性土样和重塑土样进行了三轴固结排水剪切试验,初步分析了初始应力对结构性土样的应力-应变特性的影响和初始应力各向异性结构性土的破损机制。 相似文献
13.
14.
Coal swelling/shrinkage during gas adsorption/desorption is a well-known phenomenon. For some coals the swelling/shrinkage shows strong anisotropy, with more swelling in the direction perpendicular to the bedding than that parallel to the bedding. Experimental measurements performed in this work on an Australian coal found strong anisotropic swelling behaviour in gases including nitrogen, methane and carbon dioxide, with swelling in the direction perpendicular to the bedding almost double that parallel to the bedding. It is proposed here that this anisotropy is caused by anisotropy in the coal's mechanical properties and matrix structure. The Pan and Connell coal swelling model, which applies an energy balance approach where the surface energy change caused by adsorption is equal to the elastic energy change of the coal solid, is further developed to describe the anisotropic swelling behaviour incorporating coal property and structure anisotropy. The developed anisotropic swelling model is able to accurately describe the experimental data mentioned above, with one set of parameters to describe the coal's properties and matrix structure and three gas adsorption isotherms. This developed model is also applied to describe anisotropic swelling measurements from the literature where the model was found to provide excellent agreement with the measurement. The anisotropic coal swelling model is also applied to an anisotropic permeability model to describe permeability behaviour for primary and enhanced coalbed methane recovery. It was found that the permeability calculation applying anisotropic coal swelling differs significantly to the permeability calculated using isotropic volumetric coal swelling strain. This demonstrates that for coals with strong anisotropic swelling, anisotropic swelling and permeability models should be applied to more accurately describe coal permeability behaviour for both primary and enhanced coalbed methane recovery processes. 相似文献
15.
In this paper, a simple bounding surface plasticity model is used to reproduce the yielding and stress–strain behavior of the structured soft clay found at Shanghai of China. A series of undrained triaxial tests and drained stress probe tests under isotropic and anisotropic consolidation modes were performed on undisturbed samples of Shanghai soft clay to study the yielding characteristics. The degradation of the clay structure is modeled with an internal variable that allows the size of the bounding surface to decay with accumulated plastic strain. An anisotropic tensor and rotational hardening law are introduced to reflect the initial anisotropy and the evolution of anisotropy. Combined with the isotropic hardening rule, the rotational hardening rule and the degradation law are incorporated into the bounding surface formulation with an associated flow rule. Validity of the model is verified by the undrained isotropic and anisotropic triaxial test and drained stress probe test results for Shanghai soft clay. The effects of stress anisotropy and loss of structure are well captured by the model. 相似文献
16.
17.
在岩土破损力学基础上,基于微观破损机制,提出了考虑各向异性的结构性砂土本构理论。采用Lade-Duncan强度准则考虑中主应力对抗剪强度的影响;采用考虑颗粒排列组构的各向异性状态变量A反映各向异性对土体强度和变形的影响;通过相似扩大重塑土的屈服面反映结构性对土性的影响;通过引入非相关联流动法则考虑各向异性和结构性对土体塑性变形的影响。同时,将基于微观力学机制的损伤演化规律引入结构性土的硬化规律;该硬化规律同时考虑了塑性体积应变和剪切应变对各向异性结构性土强度的影响。然后将该模型用于模拟室内三轴压缩试验,初步验证了该模型的合理性和适用性。 相似文献
18.
In order to simulate the soil response during principal stress rotation, anisotropic unified hardening (UH) model is developed within the framework of elastoplastic theory. Without introducing any additional mechanism to display the role of stress rotation specifically, this model achieves the simulation by considering the material anisotropy. The effect of inherent anisotropy is reflected using the anisotropic transformed stress method, but a new formula for the stress mapping is adopted to keep the mean stress unchanged. Analysis indicates that from the view of the transformed stress tensor, the anisotropic soil is subjected to loading during pure rotation of principal stress axes, so that plastic strains can be calculated. To represent the induced anisotropy, a fabric evolution law is proposed based on laboratory and numerical test results. At the critical state, the fabric tensor reaches a stable value determined by the stress state, while the critical state line is unique in the plane of void ratio versus mean stress. The anisotropic UH model has concise formulation and explicit elastoplastic flexibility matrix and can provide reasonable predictions for the deformation of anisotropic soils when principal stresses rotate. 相似文献
19.
R. K. Dubey 《Journal of the Geological Society of India》2018,91(1):109-114
The deformation and mechanical responses of rocks are prime concern in development of varieties of civil and mining engineering structures. The deformation and mechanical properties of both natural and artificial materials are strongly depend on mineral constituents and their arrangements, temperatures and pressures, stress rates and structural anisotropy. This study elaborates an understanding of structural anisotropy, compression rates and mechanical attributes relationship in rocks with specific examples of deformed rocksalt. The cubical samples (5X5X5 cm3) with three kinds of structural anisotropy were subjected to quasistatic compressive stress at rates 0.00035 MPa/min, 0.0035 MPa/min, 0.035 MPa/min, 0.35 MPa/min, 3.5MPa/min, 5 MPa/ min, 7MPa/min and 9 MPa/min on servo-controlled Material Testing System (MTS). The stress-strain curves prepared from deformation of rocksalt’s samples under different rates of compressions are used to determine major mechanical parameters viz., strengths, strains, and modulus of elasticity. A micromechanical en-echelon crack array model is proposed to explain the influence of structural anisotropy on deformation patterns and mechanical properties of rocksalt.According to the proposed model the deformation progresses due to different proportional contributions of tensile and shear crack arrays under the influence of structural anisotropy. The control of structural anisotropy loses with respect to increment in rate of compression with enhance contribution of shear crack arrays in comparison to tensile crack arrays and ultimately fails in shear where the structurally anisotropic rock show isotropic behaviour. 相似文献
20.
页岩力学各向异性特征是地应力、井壁稳定、水力裂缝扩展相关研究的重要基础参数。针对页岩力学各向异性宏观测试中存在样品制取困难、制样成功率低的特点,采用来源丰富的钻井岩屑或破碎岩块,通过研究纳米压痕实验原理、实验方法和数据解释方法,采用连续刚度测试方法对平行层理和垂直层理的页岩试样进行纳米压痕测试;基于硬度的分类准则将纳米压痕数据分为三类主要矿物基质进行合理解释,采用接触刚度法计算硬度、杨氏模量,采用能量法计算断裂韧性,得出了页岩粘土基质的杨氏模量、硬度和断裂韧性。测试结果表明这种基于硬度的分类准则处理纳米压痕数据是方便合理的。页岩粘土基质力学特性在纳米尺度上具有各向异性,纳米尺度力学参数与层理方向相关。页岩不同力学参数的各向异性表现不同,杨氏模量各向异性较弱,断裂韧性各向异性较强。平行层理方向断裂韧性为垂直层理方向断裂韧性的80%。 相似文献