共查询到20条相似文献，搜索用时 31 毫秒
1.
The critical state is significant to the mechanical behaviors of granular materials and the foundation of the constitutive relations. Using the discrete element method (DEM), the mechanical behaviors of granular materials can be investigated on both the macroscopic and microscopic levels. A series of DEM simulations under true triaxial conditions have been performed to explore the critical state and dilatancy behavior of granular materials, which show the qualitatively similar macroscopic responses as the experimental results. The critical void ratio and stress ratio under different stress paths are presented. A unique critical state line (CSL) is shown to indicate that the intermediate principal stress ratio does not influence the CSL. Within the framework of the unique critical state, the stress–dilatancy relation of DEM simulations is found to fulfill the state-dependent dilatancy equations. As a microscopic parameter to evaluate the static determinacy of the granular system, the redundancy ratio is defined and investigated. The results show that the critical state is very close to the statically determinate state. Other particle-level indexes, including the distribution of the contact forces and the anisotropies, are carefully investigated to analyze the microstructural evolution and the underlying mechanism. The microscopic analysis shows that both the contact orientations and contact forces influence the mechanical behaviors of granular materials. 相似文献
3.
颗粒材料离散颗粒模型的数值模拟结果与颗粒材料的数值样本密切相关,随着离散单元在颗粒材料数值模拟领域的广泛应用,颗粒材料的数值样本生成技术日益受到重视。基于RSA模型研究如何使随机生成的颗粒材料更密实,对均匀颗粒而言亦即如何在指定区域内生成更多的颗粒,讨论了4类修正方案,并建议了一种基于坐标排序的样本生成技术。研究表明,在传统的颗粒体随机生成技术基础上,通过对随机生成的x坐标序列或y坐标序列进行排序,可使生成的颗粒材料数值样本更密实。 相似文献
4.
Acta Geotechnica - A data-driven framework was used to predict the macroscopic mechanical behavior of dense packings of polydisperse granular materials. The discrete element method, DEM, was used... 相似文献
5.
In this paper, steady-state conditions for ideal monodisperse dry granular materials are both theoretically and numerically analysed. A series of discrete element (DEM) numerical simulations have been performed on a periodic cell by imposing stress paths characterized by different Lode angles, pressures, and deviatoric strain rates. The dependence of the material response on both inertial number and loading path has been discussed in terms of void ratio, fabric, and granular temperature. DEM numerical results have been finally compared with the prediction of an already conceived model based on both kinetic and critical state theories, here suitably modified to account for three-dimensional conditions. 相似文献
6.
Empirical evidence has shown that particle breakage affects the mechanical behaviour of granular materials. The source of this mechanism takes place at the particle scale, and the main consequence on the macromechanical behaviour is increasing compressibility. Due to the inverse correlation between particle size and particle crushing strength, coarse rockfill materials are particularly vulnerable to mechanical degradation due to particle breakage. However, such coarse materials do not fit in standard laboratory devices, and the alternative of large sample testing is usually unavailable or too expensive. Alternatively, recent works have proposed multi-scale approaches using the discrete element method (DEM) to carry out numerical testing of coarse crushable materials, although few studies have focused on size effects. This article presents the application of a DEM bonded-cell model to study particle size-strength correlation on angular rock aggregates. Each particle is modelled by a cluster of perfectly rigid polyhedral cells with Mohr–Coulomb contact law. Constant cell density within particles implies that the presence of potential fragmentation planes increases with size. Therefore, particle strength decreases with size. A comprehensive sensitivity analysis was carried out through 1477 particle crushing simulations in a given particle size. Based on published experimental data on calcareous rock aggregates, part of the simulations were used for calibration, and 97 additional simulations of a coarser size fraction were performed for validation. The results show a good agreement with the empirical data in terms of size effect and data scatter through Weibull statistics. 相似文献
8.
Presented is a study on the geometrical characteristics of sand particles and the mechanical behavior of sand material under external loading. Based on computed tomography technique, a reconstruction method of granular particles was developed and used to build a database of 3D geometrical models for sand particles. The studied sand particles showed good regularities in morphological characteristics and thus were suitable to be used for the random generation of numerical samples. DEM tests using realistically shaped particles were proven to better simulate the mechanical behavior of the sample during elastoplastic loading stage, which was an issue for the simplified spherical particles. The generation, extension, and breakage of the force chains controlled the strain softening behavior of sands. Anisotropy analysis using the spherical harmonic series showed that the evolution of anisotropy directions and parameters corresponded well with the macroscopic mechanical behavior of the material. Pore volume computation based on Voronoi diagram was performed to illustrate the formation and evolution of localized shear zone. The mesoscopic analysis showed that particle shape significantly influences the mechanical behavior of sands and thus should be properly modeled in numerical simulations. 相似文献
9.
In an effort to study undrained post-liquefaction shear deformation of sand, the discrete element method (DEM) is adopted to conduct undrained cyclic biaxial compression simulations on granular assemblies consisting of 2D circular particles. The simulations are able to successfully reproduce the generation and eventual saturation of shear strain through the series of liquefaction states that the material experiences during cyclic loading after the initial liquefaction. DEM simulations with different deviatoric stress amplitudes and initial mean effective stresses on samples with different void ratios and loading histories are carried out to investigate the relationship between various mechanics- or fabric-related variables and post-liquefaction shear strain development. It is found that well-known metrics such as deviatoric stress amplitude, initial mean effective stress, void ratio, contact normal fabric anisotropy intensity, and coordination number, are not adequately correlated to the observed shear strain development and, therefore, could not possibly be used for its prediction. A new fabric entity, namely the Mean Neighboring Particle Distance (MNPD), is introduced to reflect the space arrangement of particles. It is found that the MNPD has an extremely strong and definitive relationship with the post-liquefaction shear strain development, showing MNPD’s potential role as a parameter governing post-liquefaction behavior of sand. 相似文献
10.
This paper presents a fabric tensor-based bounding surface model accounting for anisotropic behaviour (e.g. the dependency of peak strength on loading direction and non-coaxial deformation) of granular materials. This model is developed based on a well-calibrated isotropic bounding surface model. The yield surface is modified by incorporating the back stress which is proportional to a contact normal-based fabric tensor for characterising fabric anisotropy. The evolution law of the fabric tensor, which is dependent on both rates of the stress ratio and the plastic strain, rules that the material fabric tends to align with the loading direction and evolves towards a unique critical state fabric tensor under monotonic shearing. The incorporation of the evolution law leads to a rotational hardening of the yield surface. The anisotropic critical state is assumed to be independent of the initial values of void ratio and fabric tensor. The critical state fabric tensor has the same intermediate stress ratio (i.e. b value) and principal directions as the critical state stress tensor. A non-associated flow rule in the deviatoric plane is adopted, which is able to predict the non-coaxial flow naturally. The stress–strain relation and fabric evolution of model predictions show a satisfactory agreement with DEM simulation results under monotonic shearing with different loading directions. The model is also validated by comparing with laboratory test results of Leighton Buzzard sand and Toyoura sand under various loading paths. The comparison results demonstrate encouraging applicability of the model for predicting the anisotropic behaviour of granular materials. 相似文献
11.
Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
12.
A homogenization strategy for granular materials is presented and applied to a three-dimensional discrete element method (DEM), that uses superellipsoids as particles. Macroscopic quantities are derived from the microscopic quantities resulting from a DEM simulation by averaging over representative volume elements (RVEs). The implementation of an RVE is described in detail regarding the definition and discretization of the RVE boundary. The homogenization strategy is validated by DEM simulations of compression and shear tests of cohesionless granular assemblies. Finally, an elasto-plastic material model is fitted to the resulting stress–strain curves. 相似文献
14.
In recent years, binary mixtures have been the subject of numerous experimental and numerical studies. However, few attempts have been made on investigating the effect of fines content (fc) on the non-associated plasticity of binary mixtures, which is significant for constitutive modelling of such material. Thanks to 2D DEM simulations, this study aims to provide an understanding of how fc affects the non-associated character of the flow rule and the resulting material instability in binary mixtures. For under-filled materials (where coarse grains constitute most of the load-bearing skeleton), fine grains help to stabilize the granular assembly (1) by limiting macroscopic plastic deformations, which results in strain hardening, and (2) by reducing contractive microstructure reorganizations, which reduces the gap between the associated and non-associated flow rule directions. Fines content influences the plastic flow direction but has no influence on normal direction of yield surface. Eventually, perspectives on mesoscale mechanisms are given to highlight the role of fine grains in the geometrical and mechanical properties of granular materials. 相似文献
15.
A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior. 相似文献
16.
The discrete element method (DEM) is crucial in investigating and modeling the elementary behavior of granular materials under varying loading conditions, especially those that cannot be adequately investigated via conventional laboratory testing. However, the application of the DEM in simulations that involve complex loading paths under undrained conditions is scarce, primarily owing to the inability to maintain a constant-volume condition. This paper presents a unified discrete element approach that can apply arbitrary loading paths while satisfying the equivalent undrained condition. The proposed method comprises two parts: (1) a novel strategy that determines the virtual pore pressure under complex undrained loading conditions, and (2) an advanced undrained servomechanism that can simultaneously control each stress component independently. Numerical algorithms corresponding to three new undrained loading paths, that is, true triaxial test, rotational shear, and traffic loading path that have never been simulated using DEM are successfully implemented in a unified manner. Macroscale simulation results under these loading paths are qualitatively in good agreement with their experimental counterparts, thereby confirming the practicality and robustness of the proposed approach. Furthermore, in-depth discussions on the DEM results from these three new loading paths are presented from microscopic perspective. 相似文献
17.
We present a numerical analysis on injection-induced crack propagation and coalescence in brittle rock. The DEM network coupling model in PFC is modified to capture the evolution of fracture geometry. An improved fluid flow model for fractured porous media is proposed and coupled with a bond-based DEM model to simulate the interactions among cracks induced by injecting fluid in two nearby flaws at identical injection rates. The material parameters are calibrated based on the macro-properties of Lac du Bonnet granite and KGD solution. A grain-based model, which generates larger grains from assembles of particles bonded together, is calibrated to identify the microscopic mechanical and hydraulic parameters of Lac du Bonnet granite such that the DEM model yields a ratio between the compressive and tensile strength consistent with experiments. The simulations of fluid injection reveal that the initial flaw direction plays a crucial role in crack interaction and coalescence pattern. When two initial flaws are aligned, cracks generally propagate faster. Some geometrical measures from graph theory are used to analyze the geometry and connectivity of the crack network. The results reveal that initial flaws in the same direction may lead to a well-connected crack network with higher global efficiency. 相似文献
18.
The behavior of model granular materials (glass beads) wetted by a small quantity of liquid forming capillary bridges is studied by one-dimensional compression test combined with X-ray computed tomography (XRCT) observation. Special attention is paid to obtain very loose initial states (initial void ratio of about 2.30) stabilized by capillary cohesion. XRCT-based analyses involve spherical particle detection adapted to relatively low-resolution images, which enable heterogeneities to be visualized and microstructural information to be collected. This study on an ideal material provides an insight into the macroscopic compression behavior of wet granular materials based on the microstructural change, such as pore distance distribution, coordination number of contacts, coordination number of neighbors and number of contacts per grain. 相似文献
19.
Discrete Element Modeling (DEM) of cyclic behavior of granular material has been attempted to understand liquefaction behavior of sands. A series of cyclic biaxial tests in both undrained and drained conditions with constant stress and strain amplitudes were performed on assemblage of loose and dense systems. Tests are conducted on monodisperse (uniform) and polydisperse (well graded) samples. From this study, it has been shown that DEM can simulate the cyclic behavior of sands very satisfactorily. Characteristic features, i.e., occurrence of large plastic strains and changing over from contractile to dilative behavior beyond the phase transformation angle, anisotropy of reduced strength on the extension side etc are very well reflected in numerical simulations. Liquefaction of loose assemblage seems to be mainly due to continued and cumulative loss of co-ordination number under each cycle as there is a reversal of loading direction and hence a continuous reorientation of fabric. There is no cumulative loss of co-ordination number in dense states because the stress ratios are mostly higher than the phase transformation level where the fabric has reached a limiting orientation. Micro mechanical explanations to the macroscopic behavior of the disc assemblage under cyclic loading are presented in terms of the force and fabric anisotropy coefficients. 相似文献
20.
The effects of initial soil fabric on behaviors of granular soils are investigated by using Distinct Element Method (DEM) numerical simulation. Soil specimens are represented by an assembly of non-uniform sized spheres with different initial contact normal distributions. Isotropically consolidated triaxial compression loading and extension unloading in both undrained and drained conditions are simulated for vertically- and horizontally-sheared specimens. The numerical simulation results are compared qualitatively with the published experimental data and the effects of initial soil fabric on resulting soil behaviors are discussed, including the effects of specimen reconstitution methods, effects of large preshearing, and anisotropic characteristics in undrained and drained conditions. The effects of initial soil fabric and mode of shearing on the quasi-steady state line are also investigated. The numerical simulation results can systematically explain that the observed experimental behaviors of granular soils are due principally to their conditions of the initial soil fabric. This outcome provides insights into the observed phenomena in microscopic view. 相似文献
|
下载免费PDF全文