共查询到20条相似文献，搜索用时 31 毫秒
1.
Fabric and its evolution need to be fully considered for effective modeling of the anisotropic behavior of cohesionless granular sand. In this study, a three‐dimensional anisotropic model for granular material is proposed based on the anisotropic critical state theory recently proposed by Li & Dafalias [2012], in which the role of fabric evolution is highlighted. An explicit expression for the yield function is proposed in terms of the invariants and joint invariants of the normalized deviatoric stress ratio tensor and the deviatoric fabric tensor. A void‐based fabric tensor that characterizes the average void size and its orientation of a granular assembly is employed in the model. Upon plastic loading, the material fabric is assumed to evolve continuously with its principal direction tending steadily towards the loading direction. A fabric evolution law is proposed to describe this behavior. With these considerations, a non‐coaxial flow rule is naturally obtained. The model is shown to be capable of characterizing the complex anisotropic behavior of granular materials under monotonic loading conditions and meanwhile retains a relatively simple formulation for numerical implementation. The model predictions of typical behavior of both Toyoura sand and Fraser River sand compare well with experimental data. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
It is well known that soil is inherently anisotropic and its mechanical behavior is significantly influenced by its fabric anisotropy. Hypoplasticity is increasingly being accepted in the constitutive modeling for soils, in which many salient features, such as nonlinear stress-strain relations, dilatancy, and critical state failure, can be described by a single tensorial equation. However, within the framework of hypoplasticity, modeling fabric anisotropy remains challenging, as the fabric and its evolution are often vaguely assumed without a sound basis. This paper presents a hypoplastic constitutive model for granular soils based on the newly developed anisotropic critical state theory, in which the conditions of fabric anisotropy are concurrently satisfied along with the traditional conditions at the critical state. A deviatoric fabric tensor is introduced into the Gudehus-Bauer hypoplastic model, and a scalar-valued anisotropic state variable signifying the interplay between the fabric and the stress state is used to characterize its impact on the dilatancy and strength of the soils. In addition, fabric evolution during shearing can explicitly be addressed. Modifications have also been undertaken to improve the performance of the undrained response of the model. The anisotropic hypoplastic model can simulate experimental tests for sand under various combinations of principle stress direction, intermediate principal stress (or mode of shearing), soil densities, and confining pressures, and the associated drastic effect of different principal stress orientations in reference to the material axes of anisotropy can be well captured. 相似文献
3.
Alexandros L. Petalas Yannis F. Dafalias Achilleas G. Papadimitriou 《国际地质力学数值与分析法杂志》2019,43(1):97-123
SANISAND is the name of a family of bounding surface plasticity constitutive models for sand within the framework of critical state theory, which have been able to realistically simulate the sand behavior under conventional monotonic and cyclic loading paths. In order to incorporate the important role of evolving fabric anisotropy, one such model was modified within the framework of the new anisotropic critical state theory and named SANISAND-F model. Yet the response under continuous stress principal axes rotation requires further modification to account for the effect of ensuing noncoaxiality on the dilatancy and plastic modulus. This modification is simpler than what is often proposed in the literature, since it does not incorporate an additional plastic loading mechanism and/or multiple dilatancy and plastic modulus expressions. The new model named SANISAND-FN is presented herein and is validated against published data for loading that includes drained stress principal axes rotation on Toyoura sand. 相似文献
4.
采用离散元方法,利用半径扩展法和重力沉积法分别生成具有初始各向同性和各向异性内结构的试样,并开展三轴不排水压缩和拉伸试验,研究不同制样方法产生的初始各向异性对砂土宏微观力学特性及其临界状态的影响。运用组构张量对砂土的各向异性进行量化,分析不同初始组构各向异性对组构张量演化的影响并确定了组构张量的临界值。试验结果表明：初始组构各向异性对试样的剪胀性有重要影响,由于受重力影响形成初始各向异性,其各向异性程度越大、组构方向与加载方向越一致,剪胀性越显著;初始组构各向异性对试样的临界状态没有影响,砂土的组构张量具有唯一的临界状态值。 相似文献
5.
In order to simulate the soil response during principal stress rotation, anisotropic unified hardening (UH) model is developed within the framework of elastoplastic theory. Without introducing any additional mechanism to display the role of stress rotation specifically, this model achieves the simulation by considering the material anisotropy. The effect of inherent anisotropy is reflected using the anisotropic transformed stress method, but a new formula for the stress mapping is adopted to keep the mean stress unchanged. Analysis indicates that from the view of the transformed stress tensor, the anisotropic soil is subjected to loading during pure rotation of principal stress axes, so that plastic strains can be calculated. To represent the induced anisotropy, a fabric evolution law is proposed based on laboratory and numerical test results. At the critical state, the fabric tensor reaches a stable value determined by the stress state, while the critical state line is unique in the plane of void ratio versus mean stress. The anisotropic UH model has concise formulation and explicit elastoplastic flexibility matrix and can provide reasonable predictions for the deformation of anisotropic soils when principal stresses rotate. 相似文献
6.
适用于砂土循环加载分析的边界面塑性模型 总被引：1，自引：0，他引：1
基于临界状态土力学框架,建立了一个适用于砂土排水循环加载的边界面塑性模型。采用了考虑虚拟峰值应力比的偏应变硬化准则,初始加载阶段应力点位于边界面上,反向加载阶段以历史最大屈服面作为边界面,同时实现了对密砂软化现象的模拟和对历史所受最大应力的记忆。边界面采用修正的椭圆形,引入考虑密度与应力水平的状态相关剪胀函数,采用非相关联流动法则和以应力反向点作为映射中心的径向映射准则。模型仅有10个参数,通过常规三轴试验即可确定,并且使用一套参数可以模拟不同围压、密度的单调和循环加载情况。分别对饱和砂土的单调、循环排水三轴试验进行模拟,结果表明,该模型能够合理地反映饱和砂土排水条件下的应力-应变特性。 相似文献
7.
Consideration of fabric anisotropy is crucial to gaining an improved understanding of the behavior of granular materials. This paper presents a constitutive model to describe the sand behavior associated with fabric anisotropy within a framework of a strain space multiple mechanism model. In the proposed model, a second-order fabric tensor is extended by incorporating a new function that represents the effect of inherent (or initial fabric) anisotropy, along with three additional parameters: two of them, a1 and a2 , control the degree of anisotropy, and the second mode of inherent anisotropy can be expressed by introducing the parameter a2 as well as the first mode by the parameter a1 . The third parameter, θ0 , expresses the principal direction of inherent anisotropy (eg, the normal vector direction of bedding planes relative to horizontal axis). The formulation of the dilative component of dilatancy (ie, positive dilatancy) is also extended to consider the effect of inherent anisotropy based on the interlocking mechanism. Experimental data on the complex anisotropic responses of Fraser River sand and Toyoura sand under monotonic loading is used to validate this model. The proposed model is shown to successfully capture anisotropic responses, which become contractive or dilative depending on different principal-stress directions, with a single set of anisotropy parameters; thus, the model is considered to possess the capability to simulate the anisotropic behaviors of granular materials. In addition to different loadings on the same fabric, the effects of different fabric anisotropies upon the sand behavior under the same loadings are also investigated. 相似文献
8.
针对传统本构理论无法描述土体单剪试验非共轴变形的不足,采用非共轴修正模型进行改进。模型基于材料状态相关临界状态理论,采用宏-细观结合的方法,将1个新的各向异性状态变量引入本构模型来描述砂土的各向异性。考虑细观组构张量和应力张量的几何关系的变化,模型可以描述砂土在主应力轴旋转条件下材料状态的变化,材料状态变化直接导致模型的硬化规律和剪胀性发生变化,因此,模型可以描述该条件下原生向异性对砂土变形的影响。引入非共轴理论对本构模型进行修正,建立了三维非共轴各向异性模型。单剪试验的加载条件会造成主应力轴相对土体沉积面发生旋转,修正模型不但能够描述砂土在主应力轴旋转条件下其原生各向异性对变形的影响,而且可以描述主应力轴旋转造成的应力诱发各向异性对土体变形的影响,因此,该模型能够对整个单剪试验的变形规律进行描述,而且物理意义清晰。通过铝棒堆积体和Toyoura砂单剪试验验证表明,非共轴修正各向异性模型能对单剪试验的整个变形过程进行较好的模拟。 相似文献
9.
This paper presents a micro-mechanical study on the characteristics of shear-induced anisotropy in granular media. Based on three-dimensional Discrete Element Method (DEM) simulations, the distinct features associated with the evolution of internal granular structure and different anisotropy sources during drained/undrained shearing of granular samples are carefully examined. The study finds that static liquefaction occurs when the geometrical anisotropy in a sample dominates the mechanical anisotropy in the overall shear strength, and the weak force network features an exceptionally high proportion of sliding contacts and develops certain degree of anisotropy. Phase transformation corresponds to a transitional, unstable state associated with a dramatic change in both coordination number and the proportion of sliding contacts in all contacts. The critical state in a granular material is always associated with a highly anisotropic fabric structure wherein both the critical void ratio and critical fabric anisotropy are uniquely related to the mean effective stress. The relations provide a more comprehensive definition for the critical state in granular media with proper reference to the critical fabric anisotropy. 相似文献
10.
This paper analyses the influence of grain shape and angularity on the behaviour of granular materials from a two‐dimensional analysis by means of a discrete element method (Contact Dynamics). Different shapes of grains have been studied (circular, isotropic polygonal and elongated polygonal shapes) as well as different initial states (density) and directions of loading with respect to the initial fabric. Simulations of biaxial tests clearly show that the behaviour of samples with isotropic particles can be dissociated from that of samples with anisotropic particles. Indeed, for isotropic particles, angularity just tends to strengthen the behaviour of samples and slow down either local or global phenomena. One of the main results concerns the existence of a critical state for isotropic grains characterized by an angle of friction at the critical state, a critical void ratio and also a critical anisotropy. This critical state seems meaningless for elongated grains and the behaviour of samples generated with such particles is highly dependent on the direction of loading with respect to the initial fabric. The study of local variables related to fabric and particle orientation gives more information. In particular, the coincidence of the principal axes of the fabric tensor with those of the stress tensor is sudden for isotropic particles. On the contrary, this process is gradually initiated for elongated particles. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
11.
The stress–strain behavior of a granular material is dominated by its internal structure, which is related to the spatial connectivity of particles, and the force chain network. In this study, a series of discrete element simulations were carried out to investigate the evolution of internal structure and force chain networks in initially isotropic granular materials along various imposed stress paths. The fabric tensor of the strong sub-network, which is the bearing network toward loading, can be related to the applied stresses uniquely. The principal directions of fabric tensor of the strong sub-network coincide with those of stress tensor during the loading process in the Lode coordinate system. The fabric of the whole contact network in the pre- and post-peak deformation stages can be related to the applied stresses as \(q_{\phi } = B\left( {q/p} \right)^{z}\) (B and z are constants depending on loading condition, such as the stress paths and mean stress level) and \(\phi_{1} :\phi_{2} :\phi_{3} \approx \left( {\sigma_{1} } \right)^{0.4} :\left( {\sigma_{2} } \right)^{0.4} :\left( {\sigma_{3} } \right)^{0.4}\), respectively. At the critical stress state, the deviator of fabric tensor of the strong sub-network is much larger than that of the whole contact network. When plotted on the π-plane, the fabric state of the strong sub-network can be expressed as a Lade’s surface, while the fabric state of the whole network corresponds to an inverted Lade’s surface. 相似文献
12.
In this paper a micro‐polar continuum approach is proposed to model the essential properties of cohesionless granular materials like sand. The model takes into account the influence of particle rotations, the mean grain size, the void ratio, the stresses and couple stresses. The constitutive equations for the stresses and couple stresses are incrementally non‐linear and based on the concept of hypoplasticity. For plane strain problems the implementation of the model in a finite element program is described. Numerical studies of the evolution of micro‐polar effects within a granular strip under plane shearing are presented. It is shown that the location and evolution of shear localization is strongly influenced by the initial state and the micro‐polar boundary conditions. For large shearing the state quantities tend towards a stationary state for which a certain coupling between the norm of the stress deviator and the norm of the couple stress tensor can be derived. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
13.
14.
Alexandros I. Theocharis Emmanouil Vairaktaris Yannis F. Dafalias Achilleas G. Papadimitriou 《国际地质力学数值与分析法杂志》2019,43(12):2041-2055
According to classical critical state theory (CST) of granular mechanics, two analytical conditions on the ratio of stress invariants and the void ratio are postulated to be necessary and sufficient for reaching and maintaining critical state (CS). The present work investigates the sufficiency of these two conditions based on the results of a virtual three-dimensional discrete element method experiment, which imposes continuous rotation of the principal axes of stress with fixed stress principal values at CS. Even though the fixity of the stress principal values satisfies the two analytical CST conditions at the initiation of rotation, contraction and abandonment of CS occur, which proves that these conditions may be necessary but are not sufficient to maintain CS. But if fixity of stress and strain rate directions in regard to the sample is considered at CS, the two analytical conditions of CST remain both necessary and sufficient. The recently proposed anisotropic critical state theory (ACST) turned this qualitative requirement of fixity into an analytical condition related to the CS value of a fabric anisotropy variable A defined in terms of an evolving fabric tensor and the plastic strain rate direction, thus, enhancing the two CST conditions by a third. In this way, the three analytical conditions of ACST become both necessary and sufficient for reaching and maintaining CS. In addition, the use of A explains the observed results by relating the stress-strain response, in particular the dilatancy, to the evolution of fabric by means of the relevant equations of ACST. 相似文献
15.
16.
The cyclic behavior of soil–structure interface can be very important in dynamic problems. The cyclic behavior of soil–structure interface may be nonlinear, which includes hysteresis, hardening, degradation, and particle breakage. The breakage of granular soil particles during shearing of granular soil–structure interface is associated with cyclic degradation and can be critical to the dynamic behavior of soil–structure system. The critical state soil mechanics concept formerly used to simulate the nonlinear monotonic behavior of granular soil–structure interface was modified and extended to describe the cyclic behavior, especially soil‐particle breakage and degradation during cyclic shearing. Soil‐particle breakage was assumed to relate to the energy consumption during cyclic shearing and the critical state line of the soil–structure interface was assumed to translate with the consumption of shearing energy during cyclic shearing as the threshold value is attained. The model was formulated in the framework of generalized plasticity and is capable of describing the salient features of granular soil–structure interface under cyclic loading. Most of the model parameters have straightforward physical meanings and are calibrated using monotonic or cyclic interface test results. The proposed model was calibrated and validated against published test results. The dependency of interface behavior on stress path and cyclic degradation can be successfully described by the proposed model. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
This paper presents a micromechanics-based approach to investigate the effects of fabric anisotropy on the behavior of localized failure in granular materials. Based on a micromechanical analysis, the origin of deviatoric stress is decomposed into two components: contact force anisotropy and fabric anisotropy. Using a micro–macro approach, the back stress is interpreted as an contribution to the change of the fabric’s principal direction. The evolution of the back stress is deduced from the stress–fabric relationship and determined with reference to the deviation of the principal directions between the rate of the reduced stress tensor and the actual reduced stress tensor. With this micro–macro framework, a mixed (isotropic–kinematic) hardening model is developed based on the classical isotropic hardening theory. A laboratory simple shear test is first analyzed to validate the proposed model and illustrate the kinematic-hardening mechanism which is usually displayed under non-proportional loading. The analysis further focuses on the anisotropic aspect of localized failure. It has been discovered that the fabric anisotropy can play an important role in the occurrence of shear banding. An increasing degree of fabric anisotropy tends to delay the initiation of the strain localization and result in higher failure strength. The effects of fabric anisotropy have also been illustrated by comparing the theoretical predictions and measured results on the shear band inclination angle, shear strain level and dilatancy at bifurcation. 相似文献
18.
从发挥面的角度出发,分析论证各向异性是引起岩土材料出现非共轴现象的根本原因,得到与材料力学一致的结论。当共轭的两发挥面与沉积面的夹角不相等时,主应力面上将出现塑性应变增量的切向分量,所以塑性应变增量的主方向与应力的主方向非共轴。按照这一结论,对非共轴的数值模拟,也应当根据各向异性本构模型进行。为考虑各向异性影响新近提出的各向异性变换应力法,改变了各应力分量的相对大小,得到的各向异性变换应力张量与真实应力张量的主方向不一致,因此也能反映非共轴。利用各向异性变换应力法,能够在现有的弹塑性本构模型的框架下,描述土的非共轴现象。以各向异性UH模型为例,预测各种加载条件下的非共轴变形,验证了该方法的有效性。 相似文献
19.
This paper presents a constitutive model for describing the stress-strain response of sands under cyclic loading. The model, formulated using the critical state theory within the bounding surface plasticity framework, is an upgraded version of an existing model developed for monotonic behaviour of cohesionless sands. With modification of the hardening law, plastic volumetric strain increment and unloading plastic modulus, the original model was modified to simulate cyclic loading. The proposed model was validated against triaxial cyclic loading tests for Fuji River sand, Toyoura sand and Nigata sand. Comparison between the measured and predicted results suggests that the proposed modified model can capture the main features of cohesionless sands under drained and undrained cyclic loading. 相似文献
20.
This study explores the link between the monotonic and cyclic undrained behaviour of sands using the discrete element method (DEM). It is shown that DEM can effectively capture the flow deformation of sands sheared under both monotonic and cyclic undrained loading conditions. When subjected to cyclic shearing, flow-type failure is observed for a loose sample, while cyclic mobility is observed for a dense sample. A strong correlation between the monotonic and cyclic loading behaviour that has been revealed experimentally is also confirmed in DEM simulations: (a) flow deformation occurs in the compressive loading direction when the cyclic stress path intersects the monotonic compression stress path prior to the monotonic extension stress path, and vice versa; (b) the onset of flow deformation in q–\(p^{\prime }\) space is located in the zone bounded by the critical state line and the instability line determined from monotonic simulations. Hill’s condition of instability is shown to be effective to describe the onset of flow failure. Micro-mechanical analyses reveal that flow deformation is initiated when the index of redundancy excluding floating particles drops to below 1.0 under both monotonic and cyclic loading conditions. Flow deformation induced by either monotonic or cyclic loading is characterized by an abrupt change of structural fabric which is highly anisotropic. The reason why the dense sample dilated during monotonic loading but showed cyclic mobility (temporary liquefaction) during cyclic loading is attributed to the repeating reversal of loading direction, which leads to the periodic change of microstructure. 相似文献