首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Ericson Formation was deposited in the distal foredeep of the Cordilleran foreland basin during Campanian time. Isopach data show that it records early dynamic subsidence and the onset of basin partitioning by Laramide uplifts. The Ericson Formation is well exposed around the Rock Springs uplift, a Laramide structural dome in southwestern Wyoming; the formation is thin, regionally extensive, and does not display the wedge‐shaped geometry typical of foredeep deposits. Sedimentation in this area was controlled both by activity in the thrust belt and by intraforeland tectonics. The Ericson Formation is ideally situated both spatially and temporally to study the transition from Sevier to Laramide (thin‐ to thick‐skinned) deformation which corresponded to the shift from flexural to dynamic subsidence and the demise of the Cretaceous foreland basin system. We establish the depositional age of the Ericson Formation as ca. 74 Ma through detrital zircon U–Pb analysis. Palaeocurrent data show a generally southeastward transport direction, but northward indicators near Flaming Gorge Reservoir suggest that the intraforeland Uinta uplift was rising and shedding sediment northward by late Campanian time. Petrographic data and detrital zircon U–Pb ages indicate that Ericson sediment was derived from erosion of Proterozoic quartzites and Palaeozoic and Mesozoic quartzose sandstones in the Sevier thrust belt to the west. The new data place temporal and geographic constraints on attempts to produce geodynamic models linking flat‐slab subduction of the oceanic Farallon plate to the onset of the Laramide orogenic event.  相似文献   

2.
Foreland basin systems   总被引：32，自引：1，他引：32  
A foreland basin system is defined as: (a) an elongate region of potential sediment accommodation that forms on continental crust between a contractional orogenic belt and the adjacent craton, mainly in response to geodynamic processes related to subduction and the resulting peripheral or retroarc fold-thrust belt; (b) it consists of four discrete depozones, referred to as the wedge-top, foredeep, forebulge and back-bulge depozones – which of these depozones a sediment particle occupies depends on its location at the time of deposition, rather than its ultimate geometric relationship with the thrust belt; (c) the longitudinal dimension of the foreland basin system is roughly equal to the length of the fold-thrust belt, and does not include sediment that spills into remnant ocean basins or continental rifts (impactogens). The wedge-top depozone is the mass of sediment that accumulates on top of the frontal part of the orogenic wedge, including ‘piggyback’ and ‘thrust top’ basins. Wedge-top sediment tapers toward the hinterland and is characterized by extreme coarseness, numerous tectonic unconformities and progressive deformation. The foredeep depozone consists of the sediment deposited between the structural front of the thrust belt and the proximal flank of the forebulge. This sediment typically thickens rapidly toward the front of the thrust belt, where it joins the distal end of the wedge-top depozone. The forebulge depozone is the broad region of potential flexural uplift between the foredeep and the back-bulge depozones. The back-bulge depozone is the mass of sediment that accumulates in the shallow but broad zone of potential flexural subsidence cratonward of the forebulge. This more inclusive definition of a foreland basin system is more realistic than the popular conception of a foreland basin, which generally ignores large masses of sediment derived from the thrust belt that accumulate on top of the orogenic wedge and cratonward of the forebulge. The generally accepted definition of a foreland basin attributes sediment accommodation solely to flexural subsidence driven by the topographic load of the thrust belt and sediment loads in the foreland basin. Equally or more important in some foreland basin systems are the effects of subduction loads (in peripheral systems) and far-field subsidence in response to viscous coupling between subducted slabs and mantle–wedge material beneath the outboard part of the overlying continent (in retroarc systems). Wedge-top depozones accumulate under the competing influences of uplift due to forward propagation of the orogenic wedge and regional flexural subsidence under the load of the orogenic wedge and/or subsurface loads. Whereas most of the sediment accommodation in the foredeep depozone is a result of flexural subsidence due to topographic, sediment and subduction loads, many back-bulge depozones contain an order of magnitude thicker sediment fill than is predicted from flexure of reasonably rigid continental lithosphere. Sediment accommodation in back-bulge depozones may result mainly from aggradation up to an equilibrium drainage profile (in subaerial systems) or base level (in flooded systems). Forebulge depozones are commonly sites of unconformity development, condensation and stratal thinning, local fault-controlled depocentres, and, in marine systems, carbonate platform growth. Inclusion of the wedge-top depozone in the definition of a foreland basin system requires that stratigraphic models be geometrically parameterized as doubly tapered prisms in transverse cross-sections, rather than the typical ‘doorstop’ wedge shape that is used in most models. For the same reason, sequence stratigraphic models of foreland basin systems need to admit the possible development of type I unconformities on the proximal side of the system. The oft-ignored forebulge and back-bulge depozones contain abundant information about tectonic processes that occur on the scales of orogenic belt and subduction system.  相似文献   

3.
Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia   总被引：3，自引：1，他引：3  
Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.  相似文献   

4.
The Andean Orogen is the type‐example of an active Cordilleran style margin with a long‐lived retroarc fold‐and‐thrust belt and foreland basin. Timing of initial shortening and foreland basin development in Argentina is diachronous along‐strike, with ages varying by 20–30 Myr. The Neuquén Basin (32°S to 40°S) contains a thick sedimentary sequence ranging in age from late Triassic to Cenozoic, which preserves a record of rift, back arc and foreland basin environments. As much of the primary evidence for initial uplift has been overprinted or covered by younger shortening and volcanic activity, basin strata provide the most complete record of early mountain building. Detailed sedimentology and new maximum depositional ages obtained from detrital zircon U–Pb analyses from the Malargüe fold‐and‐thrust belt (35°S) record a facies change between the marine evaporites of the Huitrín Formation (ca. 122 Ma) and the fluvial sandstones and conglomerates of the Diamante Formation (ca. 95 Ma). A 25–30 Myr unconformity between the Huitrín and Diamante formations represents the transition from post‐rift thermal subsidence to forebulge erosion during initial flexural loading related to crustal shortening and uplift along the magmatic arc to the west by at least 97 ± 2 Ma. This change in basin style is not marked by any significant difference in provenance and detrital zircon signature. A distinct change in detrital zircons, sandstone composition and palaeocurrent direction from west‐directed to east‐directed occurs instead in the middle Diamante Formation and may reflect the Late Cretaceous transition from forebulge derived sediment in the distal foredeep to proximal foredeep material derived from the thrust belt to the west. This change in palaeoflow represents the migration of the forebulge, and therefore, of the foreland basin system between 80 and 90 Ma in the Malargüe area.  相似文献   

5.
A two‐dimensional mathematical model considering coupling between a deforming elasto‐visco‐plastic fold–thrust belt, flexural subsidence and diffusional surface processes is solved using the Finite Element Method to investigate how the mechanical behaviour of brittle–ductile wedges influences the development of foreland basins. Results show that, depending mainly on the strength of the basal décollement, two end‐member types of foreland basin are possible. When the basal detachment is relatively strong, the foreland basin system is characterised by: (1) Highly asymmetrical orogen formed by thrusts concentrated in the incoming pro‐wedge. (2) Sedimentation on retro‐side takes place in one major foredeep basin which grows throughout orogen evolution. (3) Deposition on the pro‐side occurs initially in the foredeep, and continues in the wedge‐top before isolated basins are advected towards the orogen core where they become uplifted and exhumed. (4) Most pro‐wedge basins show an upward progression from low altitude, foredeep deposits at the base to high altitude, wedge‐top deposits near the surface. In contrast, when the basal detachment behaves weakly due to the presence of low viscosity material such as salt, the foreland basin system is characterised by (1) Broad, low relief orogen showing little preferential vergence and predominance of folding relative to faulting. (2) Deposition mainly in wedge‐top basins showing growth strata. (3) Many basins are initiated contemporaneously but form discontinuously due to the locus of active deformation jumping back and forth between different structures. Model results successfully reproduce first order observations of deforming brittle–ductile wedges and foreland basins. Moreover, the results support and provide a framework for understanding the existence of two main end‐member foreland basin types, simple and complex, associated with fold–thrust belts whose detachments are relatively strong and weak, respectively.  相似文献   

6.
Pro- vs. retro-foreland basins   总被引：1，自引：0，他引：1  
Alpine‐type mountain belts formed by continental collision are characterised by a strong cross‐sectional asymmetry driven by the dominant underthrusting of one plate beneath the other. Such mountain belts are flanked on either side by two peripheral foreland basins, one over the underthrust plate and one over the over‐riding plate; these have been termed pro‐ and retro‐foreland basins, respectively. Numerical modelling that incorporates suitable tectonic boundary conditions, and models orogenesis from growth to a steady‐state form (i.e. where accretionary influx equals erosional outflux), predicts contrasting basin development to these two end‐member basin types. Pro‐foreland basins are characterised by: (1) Accelerating tectonic subsidence driven primarily by the translation of the basin fill towards the mountain belt at the convergence rate. (2) Stratigraphic onlap onto the cratonic margin at a rate at least equal to the plate convergence rate. (3) A basin infill that records the most recent development of the mountain belt with a preserved interval determined by the width of the basin divided by the convergence rate. In contrast, retro‐foreland basins are relatively stable, are not translated into the mountain belt once steady‐state is achieved, and are consequently characterised by: (1) A constant tectonic subsidence rate during growth of the thrust wedge, with zero tectonic subsidence during the steady‐state phase (i.e. ongoing accretion‐erosion, but constant load). (2) Relatively little stratigraphic onlap driven only by the growth of the retro‐wedge. (3) A basin fill that records the entire growth phase of the mountain belt, but only a condensed representation of steady‐state conditions. Examples of pro‐foreland basins include the Appalachian foredeep, the west Taiwan foreland basin, the North Alpine Foreland Basin and the Ebro Basin (southern Pyrenees). Examples of retro‐foreland basins include the South Westland Basin (Southern Alps, New Zealand), the Aquitaine Basin (northern Pyrenees), and the Po Basin (southern European Alps). We discuss how this new insight into the variability of collisional foreland basins can be used to better interpret mountain belt evolution and the hydrocarbon potential of these basins types.  相似文献   

7.
We present field and seismic evidence for the existence of Coniacian–Campanian syntectonic angular unconformities within basal foreland basin sequences of the Austral or Magallanes Basin, with implications for the understanding of deformation and sedimentation in the southern Patagonian Andes. The studied sequences belong to the mainly turbiditic Upper Cretaceous Cerro Toro Formation that includes a world‐class example of conglomerate‐filled deep‐water channel bodies deposited in an axial foredeep depocentre. We present multiple evidence of syntectonic deposition showing that the present internal domain of the fold‐thrust belt was an active Coniacian–Campanian wedge‐top depozone where deposition of turbidites and conglomerate channels of Cerro Toro took place. Cretaceous synsedimentary deformation was dominated by positive inversion of Jurassic extensional structures that produced elongated axial submarine trenches separated by structural highs controlling the development and distribution of axial channels. The position of Coniacian‐Campanian unconformities indicates a ca. 50–80 km advance of the orogenic front throughout the internal domain, implying that Late Cretaceous deformation was more significant in terms of widening the orogenic wedge than all subsequent Andean deformation stages. This south Patagonian orogenic event can be related to compressional stresses generated by the combination of both the collision of the western margin of Rocas Verdes Basin during its closure, and Atlantic ridge push forces due to its accelerated opening, during a global‐scale plate reorganization event.  相似文献   

8.
The propagation of the deformation front in foreland systems is typically accompanied by the incorporation of parts of the basin into wedge‐top piggy‐back basins, this process is likely producing considerable changes to sedimentation rates (SR). Here we investigate the spatial‐temporal evolution of SR for the Tremp–Jaca Basin in the Southern Pyrenees during its evolution from a wedge‐top, foreredeep, forebulge configuration to a wedge‐top stage. SR were controlled by a series of tectonic structures that influenced subsidence distribution and modified the sediment dispersal patterns. We compare the decompacted SR calculated from 12 magnetostratigraphic sections located throughout the Tremp–Jaca Basin represent the full range of depositional environment and times. While the derived long‐term SR range between 9.0 and 84.5 cm/kyr, compiled data at the scale of magnetozones (0.1–2.5 Myr) yield SR that range from 3.0 to 170 cm/kyr. From this analysis, three main types of depocenter are recognized: a regional depocenter in the foredeep depozone; depocenters related to both regional subsidence and salt tectonics in the wedge‐top depozone; and a depocenter related to clastic shelf building showing transgressive and regressive trends with graded and non‐graded episodes. From the evolution of SR we distinguish two stages. The Lutetian Stage (from 49.1–41.2 Ma) portrays a compartmentalized basin characterized by variable SR in dominantly underfilled accommodation areas. The markedly different advance of the deformation front between the Central and Western Pyrenees resulted in a complex distribution of the foreland depozones during this stage. The Bartonian–Priabonian Stage (41.2–36.9 Ma) represents the integration of the whole basin into the wedge‐top, showing a generalized reduction of SR in a mostly overfilled relatively uniform basin. The stacking of basement units in the hinterland during the whole period produced unusually high SR in the wedge‐top depozone.  相似文献   

9.
The Northern Apennines provide an example of long‐term deep‐water sedimentation in an underfilled pro‐foreland basin first linked to an advancing orogenic wedge and then to a retreating subduction zone during slab rollback. New palaeobathymetric and geohistory analyses of turbidite systems that accumulated in the foredeep during the Oligocene‐Miocene are used to unravel the basin subsidence history during this geodynamic change, and to investigate how it interplayed with sediment supply and basin tectonics in controlling foredeep filling. The results show an estimated ca. 2 km decrease in palaeowater depth at ca. 17 Ma. Moreover, a change in basin subsidence is documented during Langhian time, with an average decompacted subsidence rate, during individual depocentre life, that increased from <0.3 to 0.4–0.6 mm y?1, together with the appearance of a syndepositional backstripped subsidence bracketed between 0.1 and 0.2 mm y?1. This change prevented the basin from complete filling during late Miocene and is interpreted as the foredeep response to initial rollback of the downgoing Adriatic slab. Thus, the Northern Apennine system provides an example of a pro‐foreland basin that experienced both a slow‐ and high‐subsidence regime as a consequence of the advancing then retreating evolution of the collisional system.  相似文献   

10.
Reconstructions of grain-size trends in alluvial deposits can be used to understand the dominant controls on stratal architecture in a foreland basin. Different initial values of sediment supply, tectonic subsidence and base-level rise are investigated to constrain their influence on stratal geometry using the observed grain-size trends as a proxy of the goodness of fit of the numerical results to the observed data. Detailed measurements of grain-size trends, palaeocurrent indicators, facies and thickness trends, channel geometries and palynological analyses were compiled for the middle Campanian Castlegate Sandstone of the Book Cliffs and its conglomerate units in the Gunnison and Wasatch plateaus of central Utah. They define the initial conditions for a numerical study of the interactions between large-scale foreland basin and small-scale sediment transport processes. From previous studies, the proximal foreland deposits are interpreted as recording a middle Campanian thrusting event along the Sevier orogenic belt, while the stratal architecture in the Book Cliffs region is interpreted to be controlled by eustatic fluctuation with local tectonic influence. Model results of stratal geometry, using a subsidence curve with a maximum rate of ≈45 m Myr?1 for the northern Wasatch Plateau region predict the observed grain-size trends through the northern Book Cliffs. A subsidence curve with a maximum rate of ≈30 m Myr?1 in the Gunnison–Wasatch Plateaus best reproduces the observed grain-size trends in the southern transect through the southern Wasatch Plateau. Eustasy is commonly cited as controlling Castlegate deposition east of the Book Cliffs region. A eustatic rise of 45 m Myr?1 produces grain-size patterns that are similar to the observed, but a rate of eustatic rise based on Haq et al. (1988) will not produce the observed stratal architecture or grain-size trends. Tectonic subsidence alone, or a combined rate of tectonic subsidence and a Haq et al. (1988) eustatic rise, can explain the stratal and grain-size variations in the proximal and downstream regions.  相似文献   

11.
The transition to a post‐orogenic state in mountain ranges has been identified by a change from active subsidence to isostatic rebound of the foreland basin. However, the nature of the interplay between isostatic rebound and sediment supply, and their impact on the topographic evolution of a range and foreland basin during this transition, has not been fully investigated. Here, we use a box model to explore the syn‐ to post‐orogenic evolution of foreland basin/thrust wedge systems. Using a set of parameter values that approximate the northern Pyrenees and the neighbouring Aquitaine foreland basin, we evaluate the controls on sediment drape over the frontal parts of the retro‐wedge following cessation of crustal thickening. Conglomerates preserved at approximately 600‐m elevation, which is ~ 300 m above the present mountain front in the northern Pyrenees are ca. 12 Ma, approximately 10 Myrs younger than the last evidence of crustal thickening in the wedge. Using the model, this post‐orogenic sediment drape is explained by the combination of a sustained, high sediment influx from the range into the basin relative to the efflux out of the basin, combined with cessation of the generation of accommodation space through basin subsidence. Post‐orogenic sediment drape is considered a generic process that is likely to be responsible for elevated low‐gradient surfaces and preserved remnants of continental sedimentation draping the outer margins of the northern Pyrenean thrust wedge.  相似文献   

12.
A synthesis has been undertaken based on regionally compiled data from the post early Eocene foreland basin succession of Svalbard. The aim has been to generate an updated depositional model and link this to controlling factors. The more than kilometer thick progradational succession includes the offshore shales of the Gilsonryggen Member of the Frysjaodden Formation, the shallow marine sandstones of the Battfjellet Formation and the predominantly heterolithic Aspelintoppen Formation, together recording the progressive eastwards infill of the foredeep flanking the West Spitsbergen fold‐and‐thrust belt. Here we present a summary of the paleo‐environmental depositional systems across the basin, their facies and regional distribution and link these together in an updated depositional model. The basin‐margin system prograded with an ascending shelf‐edge trajectory in the order of 1°. The basin fill was bipartite, with offset stacked shelf and shelf‐edge deltas, slope clinothems and basin floor fans in the western and deepest part and a simpler architecture of stacked shelf‐deltas in the shallower eastern part. We suggest a foredeep setting governed by flexural loading, likely influenced by buckling, and potentially developing into a wedge top basin in the mature stage of basin filling. High‐subsidence rates probably counteracted eustatic falls with the result that relative sea‐level falls were uncommon. Distance to the source terrain was small and sedimentation rates was temporarily high. Time‐equivalent deposits can be found outbound of Stappen High in the Vestbakken Volcanic Province and the Sørvestsnaget Basin 300 km further south on the Barents Shelf margin. We cannot see any direct evidence of coupling between these more southerly systems and the studied one; southerly diversion of the sediment‐routing, if any, may have taken place beyond the limit of the preserved deposits.  相似文献   

13.
Isopach and sedimentary facies maps of Upper Devonian (upper Frasnian and lower Famennian) strata deposited in a part of the central Appalachian foreland basin (eastern United States) during the Acadian orogeny show a significant change in depositional style over time. Maps of two successive upper Frasnian intervals show steady thickening to the east towards the hinterland. Coarser‐grained sediment was deposited in distinct tongues in front of the Augusta lobe, a previously recognized locus of sediment input in the central Appalachian basin. Maps of two subsequent lower Famennian stratigraphic intervals show distinct depocentres in the study area. Famennian strata thin eastward (by about 50%) over a distance of about 90 km from these depocentres to the limit of mapping at the Allegheny structural front. This is towards the Acadian sediment source and in contrast to general Upper Devonian thickening in that direction. The axes of these lower Famennian depocentres are stacked on top of each other. Also, coarser‐grained lower Famennian sediment is concentrated in strike trends just east of the axes of the depocentres, and no coarser tongues exist in front of the Augusta lobe, in contrast to the underlying (upper Frasnian) strata. The duration of each of the four study intervals is estimated to be between 0.5 and 3.0 Myr. The early Famennian depocentres may be in a back‐bulge basin, with a forebulge uplifted to the east of the study area. Earlier deposition may have occurred in a basin with a subtle, subdued, and longer wavelength forebulge (perhaps located west of the study area). Previously published regional isopachs of Upper Devonian strata suggest that the main axis of subsidence of the Acadian foreland basin (foredeep depozone) at this time was over 350 km east of the study area. Examination of published quantitative flexural models of other foreland basins with flexural rigidities close to published rigidities calculated for the Appalachian basin suggests that the proposed back‐bulge basin is in the correct location, relative to the suggested position of the foredeep at that time. Several previously recognized structural features of the northern Appalachian basin support the interpretations presented herein. Much of the Acadian foreland basin may be eroded in the central Appalachian basin. The present study demonstrates the difficulties in recognizing foreland basin depozones in partially preserved orogens.  相似文献   

14.
Stable isotope measurements (O, C, Sr), microthermometry and salinity measurements of fluid inclusions from different fracture populations in several anticlines of the Sevier‐Laramide Bighorn basin (Wyoming, USA) were used to unravel the palaeohydrological evolution. New data on the microstructural setting were used to complement previous studies and refine the fracture sequence at basin scale. The latter provides the framework and timing of fluid migration events across the basin during the Sevier and Laramide orogenic phases. Since the Sevier tectonic loading of the foreland basin until its later involvement into the Laramide thick‐skinned orogeny, three main fracture sets (out of seven) were found to have efficiently enhanced the hydraulic permeability of the sedimentary cover rocks. These pulses of fluid are attested by calcite crystals precipitated in veins from hydrothermal (T > 120 °C) radiogenic fluids derived from Cretaceous meteoric fluids that interacted with the Precambrian basement rocks. Between these events, vein calcite precipitated from formational fluids at chemical and thermal equilibrium with surrounding environment. At basin scale, the earliest hydrothermal pulse is documented in the western part of the basin during forebulge flexuring and the second one is documented in basement‐cored folds during folding. In addition to this East/West diachronic opening of the cover rocks to hydrothermal pulses probably controlled by the tectonic style, a decrease in 87/86Sr values from West to East suggests a crustal‐scale partially squeegee‐type eastward fluid migration in both basement and cover rocks since the early phase of the Sevier contraction. The interpretation of palaeofluid system at basin scale also implies that joints developed under an extensional stress regime are better vertical drains than joints developed under strike‐slip regime and enabled migration of basement‐derived hydrothermal fluids.  相似文献   

15.
This integrated study (field observations, micropalaeontology, magnetostratigraphy, geochemistry, borehole data and seismic profiles) of the Messinian–Zanclean deposits on Zakynthos Island (Ionian Sea) focuses on the sedimentary succession recording the pre‐evaporitic phase of the Messinian salinity crisis (MSC) through the re‐establishment of the marine conditions in a transitional area between the eastern and the western Mediterranean. Two intervals are distinguished through the palaeoenvironmental reconstruction of the pre‐evaporitic Messinian in Kalamaki: (a) 6.45–6.122 Ma and (b) 6.122–5.97 Ma. Both the planktonic foraminifer and the fish assemblages indicate a cooling phase punctuated by hypersalinity episodes at around 6.05 Ma. Two evaporite units are recognized and associated with the tectonic evolution of the Kalamaki–Argassi area. The Primary Lower Gypsum (PLG) unit was deposited during the first MSC stage (5.971–5.60 Ma) in late‐Messinian marginal basins within the pre‐Apulian foreland basin and in the wedge‐top (<300 m) developed over the Ionian zone. During the second MSC stage (5.60–5.55 Ma), the PLG evaporites were deeply eroded in the forebulge–backbulge and the wedge‐top areas, and supplied the foreland basin's depocentre with gypsum turbidites assigned to the Resedimented Lower Gypsum (RLG) unit. In this study, we propose a simple model for the Neogene–Pliocene continental foreland‐directed migration of the Hellenide thrusting, which explains the palaeogeography of the Zakynthos basin. The diapiric movements of the Ionian Triassic evaporites regulated the configuration and the overall subsidence of the foreland basin and, therefore, the MSC expression in this area.  相似文献   

16.
Facies distributions, stratal geometry and regional erosional bevelling surfaces in Upper Cretaceous (Cenomanian-Santonian) strata of the Alberta foreland basin are interpreted in terms of high-frequency (probably eustatic) relative changes in sea level, superimposed on longer-term basin-floor warping, related to episodic tectonic loading. Thick marine shales correspond to periods of rapid subsidence whereas thin but extensive strandplain sandstones record rapid progradation during slow subsidence. Westward-thickening wedges of coastal plain strata were deposited during initial downwarping of a near-horizontal strandplain, prior to marine transgression. Surfaces of erosional bevelling beneath which between 40 and >160m of strata have been removed extend at least 300 km from the present deformation front and are interpreted to reflect forebulge uplift in the east. Uplift appears to have lagged about 0.25-0.5 Myr behind the onset of accelerated loading. Thin marine sandstones which grade westward into mudstone are interpreted as material winnowed from the crest of the rising forebulge. Subsidence and/or westward migration of the forebulge allowed the sea to flood westward across the eastern flank of the eroded forebulge. The transgressive shoreface cut asymmetric notches which were later blanketed by marine shales which lap out from east to west. The two unconformities which embody the largest erosional vacuity are veneered locally with oolitic ironstone which accumulated in a shallow, sediment-starved setting on the crest of the forebulge. The consistent pattern of erosional bevelling and lap-out of transgressive shales might be interpreted as evidence that the forebulge migrated towards the thrust load over a period of <1 Myr.  相似文献   

17.
The main Karoo Basin of South Africa is a Late Carboniferous–Middle Jurassic retroarc foreland fill, developed in front of the Cape Fold Belt (CFB) in relation to subduction of the palaeo-Pacific plate underneath the Gondwana plate. The Karoo sedimentary fill corresponds to a first-order sequence, with the basal and top contacts marking profound changes in the tectonic setting, i.e. from extensional to foreland and from foreland to extensional, respectively. Sedimentation within the Karoo Foreland Basin was closely controlled by orogenic cycles of loading and unloading in the CFB. During orogenic loading, episodes of subsidence and increase in accommodation adjacent to the orogen correlate to episodes of uplift and decrease in accommodation away from the thrust-fold belt. During orogenic unloading the reverse occurred. As a consequence, the depocentre of the Karoo Basin alternated between the proximal region, during orogenic loading, and the distal region, during orogenic unloading. Orogenic loading dominated during the Late Carboniferous–Middle Triassic interval, leading to the accumulation of thick foredeep sequences with much thinner forebulge correlatives. The Late Triassic–Middle Jurassic interval was dominated by orogenic unloading, with deposition taking place in the distal region of the foreland system and coeval bypass and reworking of the older foredeep sequences. The out of phase history of base-level changes generated contrasting stratigraphies between the proximal and distal regions of the foreland system separated by a stratigraphic hinge line. The patterns of hinge line migration show the flexural peripheral bulge advancing towards the craton during the Late Carboniferous–Permian interval in response to the progradation of the orogenic front. The orogenward migration of the foreland system recorded during the Triassic–Middle Jurassic may be attributed to piggyback thrusting accompanied by a retrogradation of the centre of weight within the orogenic belt during orogenic loading (Early Middle Triassic) or to the retrogradation of the orogenic load through the erosion of the orogenic front during times of orogenic unloading (Late Triassic–Middle Jurassic).  相似文献   

18.
The Molasse Basin of Switzerland evolved through a distinct late Neogene history with initial development as a classic foredeep or foreland basin in response to loading of the lithosphere by the Alpine orogen. In the central and western foreland, the foredeep behaviour was terminated by deformation and uplift of the Jura Mountains in the distal regions of the foredeep. Following the Jura deformation the Plateau Molasse remained largely undeformed as it rode ‘piggy‐back’ style above the decollement feeding displacement into the Jura. Sediment accumulation data for the Molasse suggests that sedimentation in the Plateau Molasse region continued until the basin was inverted at about 5 Ma. We present a mechanical model for this sequence of events in which deformation jumps across much of the basin to the distal Jura because of the dip on the weak evaporitic decollement and the wedge‐shape of the foredeep basin. Subsequently, the Plateau Molasse remained largely undeformed as a result of continued sedimentation in a wedgetop basin, where the physical properties and geometry of the orogenic wedge combine to produce a critical wedge whose critical surface slope would be less than zero and thus should dip towards the Alpine interior. Accommodation space is created over this negative surface–slope segment of the wedge and sedimentation maintains this slope near zero, stabilizing the wedge. We present a simple analytical theory for the necessary conditions for such a ‘negative‐alpha basin’ to develop and be maintained. We compare this theory to the late Neogene evolution of the Alps, Molasse Basin and Jura Mountains and infer physical properties for the decollement.  相似文献   

19.
The stratigraphy of the Eocene-Miocene peripheral foreland basin in Switzerland consists of basal deposits of Nummulitic Limestones and Globigerina Marls representing a phase of deepening, followed by two shallowing-up megacycles culminating in fully continental sedimentation. The onset of sedimentation was diachronous and took place on an unconformity surface with increasing stratigraphic gap to the north and west. In the Ultrahelvetic units, which were derived from the south and have a provenance between the Helvetic shelf and the Penninic ocean, the stratigraphic gap is minimal. This restricts the initiation of erosion of the southern European margin due to emersion to post-Maastrichtian and pre-late Palaeocene. This coincides with the final closing of the Valais trough and may therefore be interpreted as the point at which continental flexure s. s. started. In the autochthon, the subcrop map of the unconformity surface shows that the regional pattern of subcropping units is oblique to both neo-Alpine tectonic structures and Helvetic (Mesozoic) passive margin structures. There are local zones of disruption to the broad regional pattern suggesting that the basal unconformity was corrugated. Both the paliaspastic restoration of the autochthon relative to the thrust front during the Palaeocene, and the regional pattern of erosion indicate that the basal unconformity may be due to erosion of a flexural forebulge. Following deposition of the shallow water Nummulitic Limestones and the deeper water Globigerina Marls, clastic sediments were shed from the orogenic wedge in the south. These turbidites, the Taveyannaz Sandstones, filled both ponded basins at the contemporaneous thrust front and the frontal trench or foredeep. Evidently, early thrusts drove at a shallow level into the embryonic basin as ‘front-runners’, whereas most shortening and uplift continued to take place within the main part of the orogenic wedge further to the south. Eventually, the frontal palaeohighs, together with the turbidite basins, were buried by the northward emplacement of surface mud-slides, and sediment depocentres were translated northwards onto the foreland. The most likely cause of the underfilled ‘Flysch’ stage is the rapid advance of a submarine thrust wedge over the flexed European plate which resulted in (i) low sediment fluxes and (ii) high subsidence rates associated with the rapid migration of the load and depocentre. Later, as the rate of advance slowed and the wedge became subaerially exposed, the basin rapidly filled with coarse-grained detritus representing the ‘Molasse’ stage.  相似文献   

20.
Achieving a reliable closure time of a back-arc ocean is an essential aspect in studies on detailed tectonic processes of an active continental margin and arc–continent collision. This is particularly the case for the northern Qinling Orogen, which records the accretion of the North Qinling Arc (NQA) onto the North China Block (NCB) after the Erlangping back-arc ocean closure. Sedimentological, petrological and geochronological signatures from the Ordovician successions in the southern Ordos reveal a tectonic transition from passive continental margin to peripheral foreland in the southern NCB at the beginning of Katian. Sedimentological and geochronological investigations reveal an abrupt shift of accelerating basin subsidence and deepening at the earliest Katian, separating ca. 300-m-thick shallow-marine carbonate shelf assemblages from overlying ca. 2000-m-thick deep-water carbonate slope and turbidite associations. Zircon age spectra of the Katian turbidites are characterized by early-Palaeozoic and Neoproterozoic age clusters, which are different from those of the Middle Ordovician quartz arenites sourced merely from the NCB basement. Instead, these age patterns match well with those of the coeval successions in the northern NQA, indicating a spatially linked abyssal deposystem. Stratigraphic architecture deciphers a typical foreland basin geometry, involving, from south to north, northward-propagating turbiditic wedge, northward-backstepping carbonate slope and progressively shoaling carbonate platform, embodying foredeep, forebulge and backbulge, respectively. These characteristics of basin-fill evolution reflect the northward migration of the flexural wave as a dynamic response to the northward expansion of the thickened NQA thrust wedge. Together with the other geological and geochronological data, our new insights indicate a southward subduction polarity of the Erlangping back-arc oceanic crust followed by its termination at ca. 450 Ma, which was earlier than that of the main Proto-Tethyan Shangdan Ocean between the NCB and South China Block. Our new data provide an updated view of the complex history of the Proto-Tethys closure during the Gondwana assembly.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号