共查询到20条相似文献，搜索用时 31 毫秒
1.
For regional models, the shallow water table surface is often used as a source/sink boundary condition, as model grid scale precludes simulation of the water table aquifer. This approach is appropriate when the water table surface is relatively stationary. Since water table surface maps are not readily available, the elevation of the water table used in model cells is estimated via a two-step process. First, a regression equation is developed using existing land and water table elevations from wells in the area. This equation is then used to predict the water table surface for each model cell using land surface elevation available from digital elevation models (DEM). Two methods of processing DEM for estimating the land surface for each cell are commonly used (value nearest the cell centroid or mean value in the cell). This article demonstrates how these two methods of DEM processing can affect the simulated water budget. For the example presented, approximately 20% more total flow through the aquifer system is simulated if the centroid value rather than the mean value is used. This is due to the one-third greater average ground water gradients associated with the centroid value than the mean value. The results will vary depending on the particular model area topography and cell size. The use of the mean DEM value in each model cell will result in a more conservative water budget and is more appropriate because the model cell water table value should be representative of the entire cell area, not the centroid of the model cell. 相似文献
2.
Sub-grid scale parameterisation of 2D hydrodynamic models of inundation in the urban area 总被引：1，自引：0，他引：1
This paper presents preliminary results from a study considering the parameterisation of coarse-grid 2D flood models to take
into account sub-grid scale flow patterns occurring in the urban area. A simulation of a severe flood in an urbanized coastal
floodplain is first run using a fine grid that can resolve the flow around and between buildings. Next, the same model is
run again using the same underlying topography, although stripped from any buildings, and a set of 7 values of the roughness
parameter (Manning’s n), all larger than (or equal to) the value used in the original run. A further set of simulations is carried out using a five-fold
increased grid cell size. It is found that while it may be possible to model the overall effects of the buildings using strongly
increased roughness parameter values, using a coarse grid otherwise has implications related to the loss of information about
the site topography that results in flood flow routes being incorrectly modelled. 相似文献
3.
4.
During the filling of surface microrelief depressions the precipitation excess (precipitation minus infiltration and interception) is divided between surface storage and runoff, i.e. runoff starts before the surface depressions are filled. Information on the division of precipitation excess is needed for modelling surface runoff during the filling of surface depressions. Furthermore, information on the surface of the area covered with water is needed for calculating infiltration of water stored in soil surface depressions. Thirty‐two soil surface microreliefs were determined in Danish erosion study plots. The slope was c. 10% for all plots. Data were treated initially by removing the slope, after which 20 ‘artificial’ slopes (1–20%) were introduced producing 640 new data sets. Runoff during filling of the microrelief storage was calculated for each of the 640 data sets using a model developed for calculating surface storage and runoff from grid elevation measurements. Runoff started immediately after the first addition of water for all data sets. On a field scale, however, runoff has to travel some distance as overland flow and storage in smaller and larger depressions below the runoff initiation point must be taken into consideration. The runoff increases by intermittent steps. Whenever a depression starts to overflow to the border of the plot, the runoff jumps accordingly. In spite of the jumps, the distribution between surface storage and runoff was closely related to the quotient between precipitation excess and depression storage capacity. Surface area covered with water was exponentially related to the amount of water stored in surface depressions. Models for calculating surface storage and runoff from grid elevation measurements are cumbersome and require time‐consuming measurements of the soil surface microrelief. Therefore, estimation from roughness indices requiring fewer measurements is desirable. New improved equations for such estimations are suggested. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
5.
《Advances in water resources》2005,28(1):1-14
Accurate coarse-scale soil moisture information is required for robust validation of current- and next-generation soil moisture products derived from spaceborne radiometers. Due to large amounts of land surface and rainfall heterogeneity, such information is difficult to obtain from existing ground-based networks of soil moisture sensors. Using ground-based field data collected during the Soil Moisture Experiment in 2002 (SMEX02), the potential for using distributed modeling predictions of the land surface as an upscaling tool for field-scale soil moisture observations is examined. Results demonstrate that distributed models are capable of accurately capturing a significant level of field-scale soil moisture heterogeneity observed during SMEX02. A simple soil moisture upscaling strategy based on the merger of ground-based observations with modeling predictions is developed and shown to be more robust during SMEX02 than upscaling approaches that utilize either field-scale ground observations or model predictions in isolation. 相似文献
6.
We propose an improvement of the overland‐flow parameterization in a distributed hydrological model, which uses a constant horizontal grid resolution and employs the kinematic wave approximation for both hillslope and river channel flow. The standard parameterization lacks any channel flow characteristics for rivers, which results in reduced river flow velocities for streams narrower than the horizontal grid resolution. Moreover, the surface areas, through which these wider model rivers may exchange water with the subsurface, are larger than the real river channels potentially leading to unrealistic vertical flows. We propose an approximation of the subscale channel flow by scaling Manning's roughness in the kinematic wave formulation via a relationship between river width and grid cell size, following a simplified version of the Barré de Saint‐Venant equations (Manning–Strickler equations). The too large exchange areas between model rivers and the subsurface are compensated by a grid resolution‐dependent scaling of the infiltration/exfiltration rate across river beds. We test both scaling approaches in the integrated hydrological model ParFlow. An empirical relation is used for estimating the true river width from the mean annual discharge. Our simulations show that the scaling of the roughness coefficient and the hydraulic conductivity effectively corrects overland flow velocities calculated on the coarse grid leading to a better representation of flood waves in the river channels. 相似文献
7.
Subsurface formations are characterized by heterogeneity over multiple length scales, which can have a strong impact on flow and transport. In this paper, we present a new upscaling approach, based on time-of-flight (TOF), to generate upscaled two-phase flow functions. The method focuses on more accurate representations of local saturation boundary conditions, which are found to have a dominant impact (in comparison to the pressure boundary conditions) on the upscaled two-phase flow models. The TOF-based upscaling approach effectively incorporates single-phase flow and transport information into local upscaling calculations, accounting for the global flow effects on saturation, as well as the local variations due to subgrid heterogeneity. The method can be categorized into quasi-global upscaling techniques, as the global single-phase flow and transport information is incorporated in the local boundary conditions. The TOF-based two-phase upscaling can be readily integrated into any existing local two-phase upscaling framework, thus more flexible than local–global two-phase upscaling approaches developed recently. The method was applied to permeability fields with different correlation lengths and various fluid-mobility ratios. It was shown that the new method consistently outperforms existing local two-phase upscaling techniques, including recently developed methods with improved local boundary conditions (such as effective flux boundary conditions), and provides accurate coarse-scale models for both flow and transport. 相似文献
8.
A.P. Nicholas 《地球表面变化过程与地形》2001,26(4):345-362
Results from a series of numerical simulations of two‐dimensional open‐channel flow, conducted using the computational fluid dynamics (CFD) code FLUENT, are compared with data quantifying the mean and turbulent characteristics of open‐channel flow over two contrasting gravel beds. Boundary roughness effects are represented using both the conventional wall function approach and a random elevation model that simulates the effects of supra‐grid‐scale roughness elements (e.g. particle clusters and small bedforms). Results obtained using the random elevation model are characterized by a peak in turbulent kinetic energy located well above the bed (typically at y/h = 0·1–0·3). This is consistent with the field data and in contrast to the results obtained using the wall function approach for which maximum turbulent kinetic energy levels occur at the bed. Use of the random elevation model to represent supra‐grid‐scale roughness also allows a reduction in the height of the near‐bed mesh cell and therefore offers some potential to overcome problems experienced by the wall function approach in flows characterized by high relative roughness. Despite these benefits, the results of simulations conducted using the random elevation model are sensitive to the horizontal and vertical mesh resolution. Increasing the horizontal mesh resolution results in an increase in the near‐bed velocity gradient and turbulent kinetic energy, effectively roughening the bed. Varying the vertical resolution of the mesh has little effect on simulated mean velocity profiles, but results in substantial changes to the shape of the turbulent kinetic energy profile. These findings have significant implications for the application of CFD within natural gravel‐bed channels, particularly with regard to issues of topographic data collection, roughness parameterization and the derivation of mesh‐independent solutions. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
9.
Digital elevation models (DEMs) at different resolutions (180, 360, and 720 m) are used to examine the impact of different levels of landscape representation on the hydrological response of a 690‐km2 catchment in southern Quebec. Frequency distributions of local slope, plan curvature, and drainage area are calculated for each grid size resolution. This landscape analysis reveals that DEM grid size significantly affects computed topographic attributes, which in turn explains some of the differences in the hydrological simulations. The simulations that are then carried out, using a coupled, process‐based model of surface and subsurface flow, examine the effects of grid size on both the integrated response of the catchment (discharge at the main outlet and at two internal points) and the distributed response (water table depth, surface saturation, and soil water storage). The results indicate that discharge volumes increase as the DEM is coarsened, and that coarser DEMs are also wetter overall in terms of water table depth and soil water storage. The reasons for these trends include an increase in the total drainage area of the catchment for larger DEM cell sizes, due to aggregation effects at the boundary cells of the catchment, and to a decrease in local slope and plan curvature variations, which in turn limits the capacity of the watershed to transmit water downslope and laterally. The results obtained also show that grid resolution effects are less pronounced during dry periods when soil moisture dynamics are mostly controlled by vertical fluxes of evaporation and percolation. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
Integrated river basin models should provide a spatially distributed representation of basin hydrology and transport processes to allow for spatially implementing specific management and conservation measures. To accomplish this, the Soil and Water Assessment Tool (SWAT) was modified by integrating a landscape routing model to simulate water flow across discretized routing units. This paper presents a grid‐based version of the SWAT landscape model that has been developed to enhance the spatial representation of hydrology and transport processes. The modified model uses a new flow separation index that considers topographic features and soil properties to capture channel and landscape flow processes related to specific landscape positions. The resulting model is spatially fully distributed and includes surface, lateral and groundwater fluxes in each grid cell of the watershed. Furthermore, it more closely represents the spatially heterogeneous distributed flow and transport processes in a watershed. The model was calibrated and validated for the Little River Watershed (LRW) near Tifton, Georgia (USA). Water balance simulations as well as the spatial distribution of surface runoff, subsurface flow and evapotranspiration are examined. Model results indicate that groundwater flow is the dominant landscape process in the LRW. Results are promising, and satisfactory output was obtained with the presented grid‐based SWAT landscape model. Nash–Sutcliffe model efficiencies for daily stream flow were 0.59 and 0.63 for calibration and validation periods, and the model reasonably simulates the impact of the landscape position on surface runoff, subsurface flow and evapotranspiration. Additional revision of the model will likely be necessary to adequately represent temporal variations of transport and flow processes in a watershed. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
11.
12.
Accurate estimations of water retention and detention are needed to simulate surface runoff and soil erosion following a rainfall event in a catchment. Several equations to estimate the amount of surface depressional storage, the fraction of the soil surface covered by water and the amount of rainfall excess needed to start surface runoff have been developed by Onstad (1984). The random roughness and slope gradient are needed for those estimations. Surface micro-elevation data have been gathered by a photographic method. The random roughness was determined from those elevation measurements. Several factors which have an impact on the soil surface roughness were taken into account. The main sources of influence are the type of land use, the crop stage within the growing period and tillage direction. Analyses of variance indicated that the variation in the RR-index could be explained mainly by type of land use, orientation and field type. The temporal variation was relatively small. Gradient data have been determined from a digital elevation model, constructed by digitizing contours. Combining the random roughness and the steepness of slope, the amounts of surface water retention and detention could be estimated. Knowledge of water retention and detention will improve the estimations of runoff and soil erosion modelling in catchments, such as those made with the LISEM model. The agricultural systems examined in this study have similar random roughness values in summer. Different soil erosion rates for several types of land use can not therefore be explained by the random roughness. 相似文献
13.
The coupling upscaling finite element method is developed for solving the coupling problems of deformation and consolidation of heterogeneous saturated porous media under external loading conditions. The method couples two kinds of fully developed methodologies together, i.e., the numerical techniques developed for calculating the apparent and effective physical properties of the heterogeneous media and the upscaling techniques developed for simulating the fluid flow and mass transport properties in heterogeneous porous media. Equivalent permeability tensors and equivalent elastic modulus tensors are calculated for every coarse grid block in the coarse-scale model of the heterogeneous saturated porous media. Moreover, an oversampling technique is introduced to improve the calculation accuracy of the equivalent elastic modulus tensors. A numerical integration process is performed over the fine mesh within every coarse grid element to capture the small scale information induced by non-uniform scalar field properties such as density, compressibility, etc. Numerical experiments are carried out to examine the accuracy of the developed method. It shows that the numerical results obtained by the coupling upscaling finite element method on the coarse-scale models fit fairly well with the reference solutions obtained by traditional finite element method on the fine-scale models. Moreover, this method gets more accurate coarse-scale results than the previously developed coupling multiscale finite element method for solving this kind of coupling problems though it cannot recover the fine-scale solutions. At the same time, the method developed reduces dramatically the computing effort in both CPU time and memory for solving the transient problems, and therefore more large and computational-demanding coupling problems can be solved by computers. 相似文献
14.
Hydrologic models often require correct estimates of surface macro‐depressional storage to accurately simulate rainfall–runoff processes. Traditionally, depression storage is determined through model calibration or lumped with soil storage components or on an ad hoc basis. This paper investigates a holistic approach for estimating surface depressional storage capacity (DSC) in watersheds using digital elevation models (DEMs). The methodology includes implementing a lumped DSC model to extract geometric properties of storage elements from DEMs of varying grid resolutions and employing a consistency zone criterion to quantify the representative DSC of an isolated watershed. DSC obtained using the consistency zone approach is compared to DSC estimated by “brute force” (BF) optimization method. The BF procedure estimates optimal DSC by calibrating DRAINMOD, a quasi‐process based hydrologic model, with observed streamflow under different climatic conditions. Both methods are applied to determine the DSC for relatively low‐gradient coastal plain watersheds on forested landscape with slopes less than 3%. Results show robustness of the consistency zone approach for estimating depression storage. To test the adequacy of the calculated DSC values obtained, both methods are applied in DRAINMOD to predict the daily watershed flow rates. Comparison between observed and simulated streamflow reveals a marginal difference in performance between BF optimization and consistency zone estimated DSCs during wet periods, but the latter performed relatively better in dry periods. DSC is found to be dependent on seasonal antecedent moisture conditions on surface topography. The new methodology is beneficial in situations where data on depressional storage is unavailable for calibrating models requiring this input parameter. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
15.
A new surface runoff parameterization with subgrid-scale soil heterogeneity for land surface models 总被引：7，自引：0，他引：7
Soil heterogeneity plays an important role in determining surface runoff generation mechanisms. At the spatial scales represented by land surface models used in regional climate model and/or global general circulation models (GCMs) for numerical weather prediction and climate studies, both infiltration excess (Horton) and saturation excess (Dunne) runoff may be present within a studied area or a model grid cell. Proper modeling of surface runoff is essential to a reasonable representation of feedbacks in the land–atmosphere system. In this paper, a new surface runoff parameterization that dynamically represents both Horton and Dunne runoff generation mechanisms within a model grid cell is presented. The new parameterization takes into account of effects of soil heterogeneity on Horton and Dunne runoff. A series of numerical experiments are conducted to study the effects of soil heterogeneity on Horton and Dunne runoff and on soil moisture storage under different soil and precipitation conditions. The new parameterization is implemented into the current version of the hydrologically based variable infiltration capacity (VIC) land surface model and tested over three watersheds in Pennsylvania. Results show that the new parameterization plays a very important role in partitioning the water budget between surface runoff and soil moisture in the atmosphere–land coupling system. Significant underestimation of the surface runoff and overestimation of subsurface runoff and soil moisture could be resulted if the Horton runoff mechanism were not taken into account. Also, the results show that the Horton runoff mechanism should be considered within the context of subgrid-scale spatial variability of soil properties and precipitation. An assumption of time-invariant spatial distribution of potential infiltration rate may result in large errors in surface runoff and soil moisture. In addition, the total surface runoff from the new parameterization is less sensitive to the choice of the soil moisture shape parameter of the distribution. 相似文献
16.
Using remotely-sensed data, various soil moisture estimation models have been developed for bare soil areas. Previous studies have shown that the brightness temperature (BT) measured by passive microwave sensors were affected by characteristics of the land surface parameters including soil moisture, vegetation cover and soil roughness. Therefore knowledge of vegetation cover and soil roughness is important for obtaining frequent and global estimations of land surface parameters especially soil moisture.In this study, a model called Simultaneous Land Parameters Retrieval Model (SLPRM) that is an iterative least-squares minimization method is proposed. The algorithm estimates surface soil moisture, land surface temperature and canopy temperature simultaneously in vegetated areas using AMSR-E (Advance Microwave Scanning Radiometer-EOS) brightness temperature data. The simultaneous estimations of the three parameters are based on a multi-parameter inversion algorithm which includes model construction, calibration and validation using observations carried out for the SMEX03 (Soil Moisture Experiment, 2003) region in the South and North of Oklahoma.Roughness parameter has also been included in the algorithm to increase the soil parameters retrieval accuracy. Unlike other methods, the SLPRM method works efficiently in all land covers types.The study focuses on soil parameters estimation by comparing three different scenarios with the inclusion of roughness data and selects the most appropriate one. The difference between the resulted accuracies of scenarios is due to the roughness calculation approach.The analysis on the retrieval model shows a meaningful and acceptable accuracy on soil moisture estimation according to the three scenarios.The SLPRM method has shown better performance when the SAR (Synthetic Aperture RADAR) data are used for roughness calculation. 相似文献
17.
Andrew Orr Edward Hanna Julian C.R. Hunt John Cappelen Konrad Steffen AG Stephens 《Pure and Applied Geophysics》2005,162(10):1747-1778
The main characteristic features of stable atmospheric flows over a large mountain plateau are summarised and then compared with mesoscale and synoptic scale numerical simulation, meteorological analysis, satellite imagery, and surface observations for the cases of flows over Southern Greenland for four wind directions. The detailed features are identified using the concepts and scaling of stably stratified flow over large mountains with variations in surface roughness, elevation, and heating. For westerly and easterly winds detached jets form at the southern tip, where coastal jets converge, which propagate large distances across the ocean. Near coasts katabatic winds can combine with barrier jets and wake flows generated by synoptic winds. Note how the approach flow rises/falls over southern Greenland for easterly/westerly winds, leading in both cases to more cloud on the western side. Some conclusions are drawn about the large-scale influences of these flows; detached jets in the atmosphere; air-sea interaction; formation of low pressure systems. For accurate simulations of these flows, mesoscale models are necessary with resolutions of order of 20 km or less. 相似文献
18.
Coupled groundwater–surface water (GW–SW) models are capable of simulating complex hydrological systems when used at fine resolutions. However, properly characterizing bulk GW–SW fluxes for either coarsely resolved integrated models or basin‐discretized surface water models remains a challenge. Loss of subgrid detail, while beneficially decreasing computational cost, leads to a decrease in model accuracy as scale effects become important. Ideally, coarse low‐resolution models should be informed by expected subgrid behaviour, reducing the impact of scale effects. Determining how to best represent these fine‐scale details in lower‐resolution models is important for improving the accuracy and appropriateness of these models. To investigate some of these scale effects, we here explore the relationships between area‐averaged hydraulic head and bulk GW–SW exchange fluxes (e.g. evapotranspiration and discharge), all of which are presumed to be controlled predominantly by subgrid topographic effects. These relationships may be useful for simply upscaling models without the complete loss of crucial fine‐resolution subgrid details. Using finely resolved simulation output from Modflow for a fine‐resolution simulation and post‐processed results generated to represent coarser resolutions, upscaled flux relationships (UFRs) are generated for multiple terrains; these UFRs define the relationships that exist between average hydraulic head and average fluxes in unconfined aquifer systems. It is found that, for steady‐flow regimes, similar one‐to‐one power law relationships consistently exist between area‐averaged hydraulic heads, exchange fluxes and saturated area for a variety of terrains. Additionally, when the averaged values are properly normalized, the generated steady‐state UFRs for a single terrain are independent of hydraulic conductivity and potential evapotranspiration rates and apparently insensitive to the presence of mild heterogeneity. While some hysteresis is apparent in the relationships under transient conditions, transient artefacts are shown to be minor under some circumstances, indicating that UFRs may be applied to both steady‐state and transient scenarios. Simpler tests performed under saturated and variably saturated conditions in a cross‐sectional model show similar trends, suggesting that the UFR representation is extendable to systems where the vadose zone plays a significant role. It is suggested that relatively simple UFRs such as these may find use as an alternative to direct point upscaling or multi‐resolution models for estimating GW–SW exchange fluxes in coarse‐scale models. They also appear to justify the functional form of some classical models of baseflow and evapotranspiration used in conceptual surface water models. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
19.
ABSTRACTThe impacts of changes in forest coverage on extreme floods have drawn much attention globally. This study quantifies the sensitivity of flood peaks to forest coverage and roughness changes. With this objective, a framework is first introduced that includes a variance-based sensitivity analysis approach and a water and energy budget-based distributed hydrological model with a vegetation module. The influence of forest coverage changes is simulated by altering land-use types that are based on physical parameters. A variance decomposition approach is used to quantify the contribution of influential factors, i.e. event size, forest coverage and roughness changes, to extreme flood peak variations. The results in a medium-sized river basin show forest coverage changes have little influence: variations in canopy interception, ground surface water retention, soil moisture and groundwater table resulting from changing forest coverage did not alter flood peaks considerably. In contrast, it is found that flood peaks are more sensitive to roughness variations. 相似文献
20.
Andries J. Paarlberg C. Marjolein Dohmen‐Janssen Suzanne J. M. H. Hulscher Paul Termes Ralph Schielen 《地球表面变化过程与地形》2010,35(15):1854-1866
This paper presents an approach to incorporate time‐dependent dune evolution in the determination of bed roughness coefficients applied in hydraulic models. Dune roughness is calculated by using the process‐based dune evolution model of Paarlberg et al. ( 2009 ) and the empirical dune roughness predictor of Van Rijn ( 1984 ). The approach is illustrated by applying it to a river of simple geometry in the 1‐D hydraulic model SOBEK for two different flood wave shapes. Calculated dune heights clearly show a dependency on rate of change in discharge with time: dunes grow to larger heights for a flood wave with a smaller rate of change. Bed roughness coefficients computed using the new approach can be up to 10% higher than roughness coefficients based on calibration, with the largest differences at low flows. As a result of this larger bed roughness, computed water depths can be up to 15% larger at low flow. The new approach helps to reduce uncertainties in bed roughness coefficients of flow models, especially for river systems with strong variations in discharge with time. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献