共查询到20条相似文献，搜索用时 22 毫秒
1.
《Quaternary Science Reviews》2007,26(22-24):2823-2843
Fluvial and karstic data sets indicating Late Cenozoic surface uplift in the eastern United States are modelled for the first time using a technique, incorporating coupling between surface processes and flow in the lower continental crust, which has been extensively used for modelling similar data sets elsewhere in the world, notably in Europe. Distinct phases of lower-crustal flow forcing, starting in the early Middle Miocene, Late Pliocene, and late Early Pleistocene, are evident, as observed elsewhere, and relate to combinations of cyclic surface loading (by sea-level variations and ice loads) and to variations in regional erosion rates, as elsewhere. However, the detailed uplift histories inferred are rather different from those indicated in many other regions, notably Europe, primarily because of different properties of the crust. In particular, in the Late Proterozoic/Phanerozoic crust of the Appalachians, the mobile lower-crustal layer seems to be relatively thick, causing a prolonged uplift response for each phase of lower-crustal flow forcing, whereas in the Early Proterozoic crust of the Yavapai crustal province farther west, underlain by a thick basal mafic layer, this mobile layer is much thinner, leading to a very different response consisting of abrupt alternations of uplift and subsidence, as is also observed in other regions of Early Proterozoic crust. Another important difference relative to western and central Europe is the much smaller number of terraces in the eastern US rivers that have been studied. The general applicability of this type of physics-based modelling technique is thus confirmed. 相似文献
2.
Two-dimensional thermal-mechanical numerical models show that Rayleigh-Taylor-type （RT） gravitational removal of high-density lithosphere may produce significant surface deformation （vertical deflection 〉1000 m） in the interior of a continental plate.A reasonable range of crustal strengths and thicknesses,representing a variation from a stable continental interior to a hot orogen with a thick crust,is examined to study crustal deformation and the surface deflection in response to an RT instability.In general,three types of surface deflection are observed during the RT drip event：（1） subsidence and negative topography; （2） uplift and positive topography; （3） subsidence followed by uplift and inverted topography.One key factor that determines the surface expression is the crustal thickness.Models with a thin crust mainly show subsidence and develop a basin.In the thick crust models,surface expressions are more variable,depending on the crustal strength and depth of highdensity anomaly.With weak crust and a deep high-density anomaly,the RT drip is decoupled from the overlying crust,and the surface exhibits uplift or little deflection,as the RT drip induces contraction and thickening of the overlying crust.In contrast,with a strong crust and shallow anomaly,the surface is more strongly coupled with the drip and undergoes subsidence,followed by uplift. 相似文献
3.
Surface uplift is widely observed in subaerial regions of continental crust that are distant from plate boundaries, often revealed by river terrace staircases with altitude ranges of several hundred metres, which typically span the Quaternary. This characteristic geomorphology has been explained by forcing of flow in the weak lower‐crustal layer by surface processes: non‐steady‐state erosion and cyclical loading by ice‐sheets and sea‐level fluctuations. This study tests this interpretation, by showing that analogous river‐terrace staircases are absent in Archaean crust, which lacks the weak lower‐crustal layer found elsewhere. 相似文献
4.
M.H.P. Bott 《Tectonophysics》1976,36(1-3)
A mechanism for causing graben-like subsidence by crustal stretching in response to tension is suggested, based partly on previous hypotheses of Vening Meinesz, Artemjev and Artyushkov, Bott and Fuchs. The mechanism requires rheological subdivision of the crust into a brittle upper layer about 10–20 km thick overlying a ductile lower crust. The brittle layer responds to tension by normal faulting and wedge subsidence; the ductile layer responds by local or regional thinning and by lateral flow of material from beneath the subsiding wedge causing complementary uplift by horst formation or elastic upbending. A graben width of between 30 and 60 km is predicted in absence of basement inhomogeneity. Computations of the energy budget indicate that sedimentary basins of more than 5 km thickness can form by the mechanism provided that water pressure reduces the friction on the faults. The mechanism can explain relatively rapid beginning and end of subsidence, and spasmodic sinking may occur. A wide variety of observed graben-like basins can be explained by the hypothesis, including classical rift valleys and the Mesozoic basins of UK and the North Sea, but it is inapplicable to broad unfaulted cratonic or shelf subsidence. 相似文献
5.
ROB WESTAWAY 《Boreas: An International Journal of Quaternary Research》2009,38(2):261-284
Prior to its disruption during the Anglian glaciation (MIS 12), the Ingham or Bytham River used to flow eastwards across central England and East Anglia into the southern North Sea. It thus had a much larger catchment than any extant river system in Britain; its headwaters may well have been as far away as North Wales and/or NW England. Terrace deposits of this former river system crop out across East Anglia and, as for any other river, can be used to investigate uplift, landscape evolution and the physical properties of the underlying continental crust. However, such an investigation has hitherto been hampered by inconsistencies between different authors' terrace schemes; furthermore, and controversially, one such scheme has formed the basis for the inference that the region was affected by a pre‐Anglian (MIS 16) glaciation. By re‐examining the raw data, the Ingham River deposits are shown to be disposed in three terraces, inferred to date from MIS 16, 14 and 12. The evidence previously attributed to pre‐Anglian glaciation is associated with the youngest of these terraces, and thus marks the MIS 12 (i.e. Anglian) glaciation; the argument for glaciation of the region in MIS 16 is thus an artefact of previous miscorrelation of the terrace deposits. It is inferred that development of the very large Ingham River was synchronous with decapitation of the former ‘Greater Thames’, or ‘High‐level Kesgrave Thames’ river, some time between MIS 18 and MIS 16. Uplift histories at representative localities across East Anglia have been modelled using composite data sets, combining the terrace deposits of the Ingham River and of the post‐Anglian rivers Lark and Waveney. The sites modelled are typefied by much faster uplift in the early Middle Pleistocene than in the late Middle Pleistocene; this effect is shown to be a consequence of the relative thinness (no more than ～7–8 km thick) of the mobile lower‐crustal layer, itself a consequence of the low surface heat flow in the London Platform crustal province. The post‐Early Pleistocene uplift tapers eastward, consistent with the observed downstream convergence of the Ingham and Waveney terraces, and is close to zero near the modern coastline around Lowestoft and Great Yarmouth. Stratigraphic relationships between the Ingham terrace deposits and temperate‐stage marine and terrestrial deposits in this coastal area allow sites to be dated; thus, Pakefield and Corton date from MIS 15, whereas Norton Subcourse dates from MIS 17. The oldest known Lower Palaeolithic sites in the region, characterized by flake artefacts, are Pakefield (MIS 15) and Hengrave (?MIS 14); younger pre‐Anglian sites that have yielded handaxes and/or fossil material of the water vole Arvicola cantiana date from MIS 13. The minimal vertical crustal motion in this coastal area, where temperate‐stage deposits from different climate cycles crop out close to present‐day sea level, does not imply high crustal stability; instead, it indicates a ‘hinge zone’ between the uplifting hinterland and the subsiding depocentre in the southern North Sea. 相似文献
6.
半地堑盆地演化机制的粘弹塑数值模拟 总被引：2，自引：1，他引：1
利用新近完成的粘弹塑构造模拟软件包对盆地的动力学演化进行了一系列模拟。文中主要概述不同厚度的上地壳中由高角度平面正断层界定的半地堑盆地的演化模拟。模拟时上地壳被考虑成具有Byerlee型强度包络 ,并且位于无粘性基底之上 ,盆地中由密度比地壳密度小的沉积物充填。计算了以一定增量逐渐拉伸上地壳层时各个阶段的非静岩应力 (Nonlitho staticstress)、塑性破裂 (Plasticfailure)分布及挠曲剖面 (Flexureprofile)。塑性变形使得有效弹性厚度减小。到切穿破裂出现以前 ,断层断距一直增加 ,之后 ,断距基本停止增加。所以 ,地壳强度使沉降量和隆升量均有极限。上地壳层厚度和沉积物密度是控制盆地宽度和极限深度的两个重要因素 ,上地壳层厚度增加或者沉积物密度加大都使盆地宽度和深度增大。模拟结果可以解释一些大陆裂谷盆地的宽度和沉积深度。 相似文献
7.
Eugene V. Artyushkov Michael A. Baer Peter A. Chekhovich Nils-Axel Mrner 《Tectonophysics》2000,320(3-4):271-310
An analysis is presented of the mechanisms of tectonic evolution of the southern part of the Urals between 48N and 60N in the Carboniferous–Triassic. A low tectonic activity was typical of the area in the Early Carboniferous — after closure of the Uralian ocean in the Late Devonian. A nappe, ≥10–15 km thick, overrode a shallow-water shelf on the margin of the East European platform in the early Late Carboniferous. It is commonly supposed that strong shortening and thickening of continental crust result in mountain building. However, no high mountains were formed, and the nappe surface reached the altitude of only ≤0.5 km. No high topography was formed after another collisional events at the end of the Late Carboniferous, in the second half of the Early Permian, and at the start of the Middle Triassic. A low magnitude of the crustal uplift in the regions of collision indicates a synchronous density increase from rapid metamorphism in mafic rocks in the lower crust. This required infiltration of volatiles from the asthenosphere as a catalyst. A layer of dense mafic rocks, 20 km thick, still exists at the base of the Uralian crust. It maintains the crust, up to 60 km thick, at a mean altitude 0.5 km. The mountains, 1.5 km high, were formed in the Late Permian and Early Triassic when there was no collision. Their moderate height precluded asthenospheric upwelling to the base of the crust, which at that time was 65–70 km thick. The mountains could be formed due to delamination of the lower part of mantle root with blocks of dense eclogite and/or retrogression in a presence of fluids of eclogites in the lower crust into less dense facies.
The formation of foreland basins is commonly attributed to deflection of the elastic lithosphere under surface and subsurface loads in thrust belts. Most of tectonic subsidence on the Uralian foreland occurred in a form of short impulses, a few million years long each. They took place at the beginning and at the end of the Late Carboniferous, and in the Late Permian. Rapid crustal subsidence occurred when there was no collision in the Urals. Furthermore, the basin deepened away from thrust belt. These features preclude deflection of the elastic lithosphere as a subsidence mechanism. To ensure the subsidence, a rapid density increase was necessary. It took place due to metamorphism in the lower crust under infiltration of volatiles.
The absence of flexural reaction on the Uralian foreland on collision in thrust belt together with narrow-wavelength basement deformations under the nappe indicate a high degree of weakening of the lithosphere. Such deformations took also place on the Uralian foreland at the epochs of rapid subsidences when there was no collision in thrust belt. Weakening of the lithosphere can be explained by infiltration of volatiles into this layer from the asthenosphere and rapid metamorphism in the mafic lower crust. Lithospheric weakening allowed the formation of the Uralian thrust belt under convergent motions of the plates which were separated by weak areas. 相似文献
8.
E.V. Artyushkov S.P. Korikovsky H.-J. Massonne P.A. Chekhovich 《Russian Geology and Geophysics》2018,59(11):1389-1409
Precambrian cratons cover about 70% of the total continental area. According to a large volume of geomorphological, geological, paleontological, and other data for the Pliocene and Pleistocene, these cratons have experienced a crustal uplift from 100-200 m to 1000-1500 m, commonly called the recent or Neotectonic uplift. Shortening of the Precambrian crust terminated half a billion years ago or earlier, and its uplift could not have been produced by this mechanism. According to the main models of dynamic topography in the mantle, the distribution of displacements at the surface is quite different from that of the Neotectonic movements. According to seismic data, there is no magmatic underplating beneath most of the Precambrian cratons. In most of cratonic areas, the mantle lithosphere is very thick, which makes its recent delamination unlikely. Asthenospheric replacement of the lower part of the mantle lithosphere beneath the Precambrian cratons might have produced only a minor part of their Neotectonic uplifts. Since the above mechanisms cannot explain this phenomenon, the rock expansion in the crustal layer is supposed to be the main cause of the recent uplift of Precambrian cratons. This is supported by the strong lateral nonuniformity of the uplift, which indicates that expansion of rocks took place at a shallow depth. Expansion might have occurred in crustal rocks that emerged from the lower crust into the middle crust with lower pressure and temperature after the denudation of a thick layer of surface rocks. In the dry state, these rocks can remain metastable for a long time. However, rapid metamorphism accompanied by expansion of rocks can be caused by infiltration of hydrous fluids from the mantle. Analysis of phase diagrams for common crustal rocks demonstrates that this mechanism can explain the recent crustal uplift of Precambrian cratons. 相似文献
9.
Sébastien Gac Ritske S. Huismans Nina S. C. Simon Yuri Y. Podladchikov Jan Inge Faleide 《地学学报》2013,25(6):459-464
The origin of large subsidence in intracratonic basins is still under debate. We propose a new and self‐consistent model for the formation of those basins, where lithospheric shortening/buckling triggers metamorphism and densification of crustal mafic heterogeneities. We use a forward thermo‐mechanical finite element technique to evaluate this mechanism for the typical example of the East Barents Sea basin (EBB) where a very large and compensated subsidence, accommodating an up to 20‐km‐thick sediment succession, is observed. The lower crust in the dynamic model is modelled with petrologic‐consistent densities for a wet mafic gabbroic composition that depend on pressure and temperature taking into account dehydration at high PT conditions. The model successfully explains the main characteristics of the EBB, notably the large anomalous and fast subsidence during the Late Permian–Early Triassic, its present‐day geometry and the absence of a significant gravity anomaly. 相似文献
10.
The relatively low elevation and thick crust in the Altiplano, in comparison to the higher elevation, but thinner crust in the Puna plateau, together with geophysical data, suggests that isostatic equillibrium is achieved by cooler and denser lithospheric mantle in the Altiplano. Excess density in the Altiplano mantle could create differential horizontal stress in the order of 25 MPa between both lithospheric columns. Numerical models accounting for pressure and temperature-dependent rheology show that such stress can induce horizontal ductile flow in the lower crust, from the Puna towards the Altiplano. With a minimum viscosity of 1019 Pa s, this flow reaches 1 cm/year, displacing more than 50 km of material within 5 Ma. If the lower crust viscosity is smaller, the amount of orogeny-parallel lower crustal flow can be even greater. Such a mechanism of channel flow may explain that different amounts of crustal material have been accommodated by shortening in the Altiplano and in the Puna. Because of the strength of the elastic-brittle upper crust, this channel flow does not necessitate large amounts of surface deformation (except vertical uplift), making it difficult to detect from the geology. 相似文献
11.
The crustal structure of the western Arabian platform is derived using the spectral analysis of long-period P-wave amplitude ratios. The ratio of the vertical to the horizontal component is used to obtain the crustal transfer function based on thickness variations, crustal velocities, densities and the angle of emergence at the lower crust and upper mantle interface. Eleven well-defined earthquakes recorded at the long-period RYD station during the period from 1985 to 1994 were selected for analysis based on the following criteria: focal depths with a range between 7 and 89 km, body-wave magnitudes greater than 4.7, epicentral distances with a range from 8.8° to 26.5°, and back azimuthal coverage from 196° to 340°. Spectral analysis calculations were based on the comparison of the observed spectral ratios with those computed from theoretical P-wave motion obtained using the Thomson–Haskell matrix formulation for horizontally layered crustal models. The selection of the most suitable model was based on the identification of the theoretical model which exhibits the highest cross-correlation coefficient with the observed transfer function ratio. By comparing the spectral peak positions of the observed and theoretical values, the thickness and velocity can be resolved within 3 km and 1 km/s, respectively, of the observed values. The spectral analysis of long-period P-waves can detect a thin layer near the surface of about 1.6 km thick and a velocity contrast of about 10% with that of the underlying layer. A strong velocity gradient of about 0.05 km/s per km was found in the upper crust and 0.02 km/s per km in the lower crust. The derived crustal model is not unique due to the theoretical assumptions (horizontal layering, constant densities and velocities in each layer), quality of the data and complexities of the crustal structure. The crustal model suggests that the crust consists of five distinct layers. The upper crustal layer has a P-wave velocity of about 5.6 km/s and is about 1.6 km thick. The second layer has a velocity of about 6.2 km/s and is 10.2 km thick. The third layer shows a velocity of 6.6 km/s and is 6.8 km thick. The fourth layer has a velocity of about 6.8 km/s and is 12.3 km thick. The lower crustal layer has a velocity of about 7.5 km/s and is 9.3 km thick. The Mohorovicic discontinuity beneath the western Arabian platform indicates a velocity of 8.2 km/s of the upper mantle and 42 km depth. 相似文献
12.
沉积盆地的地层形态、岩相类型以及空间配置样式是构造事件的重要标识，沉积序列中特征岩石组分的出现标志着毗邻造山带隆升的初始启动时间，与物源区地层单元垂向叠置序列相反或相同的岩屑组分剖面分布则是幕式构造旋回的反映，在前陆盆地中砾石层的出现被认为是冲断岩席活动的记录，而在断陷盆地和走滑拉分盆地中通常可识别出100m级的向上变粗和向上变细的旋回层，它们被解释为构造高地重复姓升和溯源侵蚀的结果，最近的研究工作表明，急剧的构造沉降主要是通过细粒级河湖相沉积补偿的，广泛的砾岩进积发生在构造活动的平静期，构造驱动的山脉隆升表现为砾岩地层呈楔状体，纵向河流水系发育；重力均衡回返所导致的山系隆升则形成以横向河流水系为主的板状砾岩沉积，从青藏高原腹地、周缘和外延海洋盆地的沉积记录中可获得取重大构造变革时期的信息，也许是解决目前有关印度与亚洲大陆碰撞、高原隆升等时性或穿时性以及限定陆内变形调节机制的一个重要手段。 相似文献
13.
沉积盆地的地层形态、岩相类型以及空间配置样式是构造事件的重要标识.沉积序列中特征岩石组分的出现标志着毗邻造山带隆升的初始启动时间,与物源区地层单元垂向叠置序列相反或相同的岩屑组分剖面分布则是幕式构造旋回的反映.在前陆盆地中砾石层的出现被认为是冲断岩席活动的记录,而在断陷盆地和走滑拉分盆地中通常可识别出100m级的向上变粗和向上变细的旋回层,它们被解释为构造高地重复隆升和溯源侵蚀的结果.最近的研究工作表明,急剧的构造沉降主要是通过细粒级河湖相沉积补偿的,广泛的砾岩进积发生在构造活动的平静期.构造驱动的山脉隆升表现为砾岩地层呈楔状体,纵向河流水系发育;重力均衡回返所导致的山系隆升则形成以横向河流水系为主的板状砾岩沉积.从青藏高原腹地、周缘和外延海洋盆地的沉积记录中可获取重大构造变革时期的信息,也许是解决目前有关印度与亚洲大陆碰撞、高原隆升等时性或穿时性以及限定陆内变形调节机制的一个重要手段. 相似文献
14.
LI Yong YAN Zhaokun ZHOU Rongjun YAN Liang DONG Shunli SHAO Chongjian LAURENCE Svirchev 《《地质学报》英文版》2018,92(1):56-73
This study examines the relationship between high positive isostatic gravity anomalies (IGA), steep topography and lower crustal extrusion at the eastern margin of the Tibetan Plateau. IGA data has revealed uplift and extrusion of lower crustal flow in the Longmen Shan Mountains (the LMS). Firstly, The high positive IGA zone corresponds to the LMS orogenic belt. It is shown that abrupt changes in IGA correspond to zones of abrupt change of topography, crustal thickness and rock density along the LMS. Secondly, on the basis of the Airy isostasy theory, simulations and inversions of the positive IGA were conducted using three-dimensional bodies. The results indicated that the LMS lacks a mountain root, and that the top surface of the lower crust has been elevated by 11 km, leading to positive IGA, tectonic load and density load. Thirdly, according to Watts’s flexural isostasy model, elastic deflection occurs, suggesting that the limited (i.e. narrow) tectonic and density load driven by lower crustal flow in the LMS have led to asymmetric flexural subsidence in the foreland basin and lifting of the forebulge. Finally, based on the correspondence between zones of extremely high positive IGA and the presence of the Precambrian Pengguan-Baoxing complexes in the LMS, the first appearance of erosion gravels from the complexes in the Dayi Conglomerate layer of the Chengdu Basin suggest that positive IGA and lower crustal flow in the LMS took place at 3.6 Ma or slightly earlier. 相似文献
15.
The superdeep North Caspian, South Caspian, and Barents basins have their sedimentary fill much thicker and the Moho, correspondingly, much deeper than it is required for crustal subsidence by lithospheric stretching. In the absence of large gravity anomalies, this crustal structure indicates the presence under the Moho of a thick layer of eclogite which is denser than mantle peridotite. Crustal subsidence in the basins can be explained by high-grade metamorphism of mafic lower crust. The basins produced by lithospheric stretching normally subside for the first ～100 myr of their history, while at least half of the subsidence in the three basins occurred after that period, which is another evidence against the stretching formation mechanism. According to the seismic reflection profiling data, stretching can be responsible for only a minor part of the subsidence in the Caspian and Barents basins. As for the South Caspian basin, there has been a large recent subsidence event in a setting of compression. Therefore, eclogitization appears to be a realistic mechanism of crustal subsidence in superdeep basins. 相似文献
16.
It is speculated that until Late Carboniferous time the region of Hercynian Europe was occupied by an elongated island arc system underlain by a segment of continental crust. In the Upper Carboniferous, two subduction zones are assumed to have extended from the north and south beneath Hercynian Europe. An extensive zone of hot, partially molten upper mantle lay above and between these, and diapiric uprise of portions of this material led to separation of mafic magmas, widespread partial melting in the lower and middle crust, high temperature-low pressure metamorphism in crustal rocks, and regional uplift and extension of the crust, as indicated by intermontane troughs and their associated volcanic rocks.In Visean to Westphalian time Hercynian Europe collided with both the large neighbouring plates North America-Europe and Africa. During these diachronous collisions and owing to reduced rigidity of the relatively hot island arc crust, the irregular continental margins of the larger and thicker continental plates induced oroclinal bending of Hercynian Europe. After the collision processes had been terminated, processes of upper mantle activity continued, causing further crustal uplift and even, enhanced crustal extension for several tens of million years into the Lower Permian. Decline of the upper mantle activity beneath Hercynian Europe is indicated by crustal subsidence and formation of a peneplain in Permian time followed by the Upper Permian transgression of both the Zechstein sea and the Tethys sea which mark the end of the Hercynian geodynamic cycle. 相似文献
17.
《Russian Geology and Geophysics》2014,55(5-6):649-667
Consolidated crust in the North Barents basin with sediments 16–18 km thick is attenuated approximately by two times. The normal faults in the basin basement ensure only 10-15% stretching, which caused the deposition of 2–3 km sediments during the early evolution of the basin. The overlying 16 km of sediments have accumulated since the Late Devonian. Judging by the undisturbed reflectors to a depth of 8 s, crustal subsidence was not accompanied by any significant stretching throughout that time. Dramatic subsidence under such conditions required considerable contraction of lithospheric rocks. The contraction was mainly due to high-grade metamorphism in mafic rocks in the lower crust. The metamorphism was favored by increasing pressure and temperature in the lower crust with the accumulation of a thick layer of sediments. According to gravity data, the Moho in the basin is underlain by large masses of high-velocity eclogites, which are denser than mantle peridotites. The same is typical of some other ultradeep basins: North Caspian, South Caspian, North Chukchi, and Gulf of Mexico basins. From Late Devonian to Late Jurassic, several episodes of rapid crustal subsidence took place in the North Barents basin, which is typical of large petroleum basins. The subsidence was due to metamorphism in the lower crust, when it was infiltrated by mantle-source fluids in several episodes. The metamorphic contraction in the lower crust gave rise to deep-water basins with sediments with a high content of unoxidized organic matter. Along with numerous structural and nonstructural traps in the cover of the North Barents basin, this is strong evidence that the North Barents basin is a large hydrocarbon basin. 相似文献
18.
Tectonically active Vindhyan intracratonic basin situated in central India, forms one of the largest Proterozoic sedimentary basins of the world. Possibility of hydrocarbon occurrences in thick sediments of the southern part of this basin, has led to surge in geological and geophysical investigations by various agencies. An attempt to synthesize such multiparametric data in an integrated manner, has provided a new understanding to the prevailing crustal configuration, thermal regime and nature of its geodynamic evolution. Apparently, this region has been subjected to sustained uplift, erosion and magmatism followed by crustal extension, rifting and subsidence due to episodic thermal interaction of the crust with the hot underlying mantle. Almost 5–6 km thick sedimentation took place in the deep faulted Jabera Basin, either directly over the Bijawar/Mahakoshal group of mafic rocks or high velocity-high density exhumed middle part of the crust. Detailed gravity observations indicate further extension of the basin probably beyond NSL rift in the south. A high heat flow of about 78 mW/m2 has also been estimated for this basin, which is characterized by extremely high Moho temperatures (exceeding 1000 °C) and mantle heat flow (56 mW/m2) besides a very thin lithospheric lid of only about 50 km. Many areas of this terrain are thickly underplated by infused magmas and from some segments, granitic–gneissic upper crust has either been completely eroded or now only a thin veneer of such rocks exists due to sustained exhumation of deep seated rocks. A 5–8 km thick retrogressed metasomatized zone, with significantly reduced velocities, has also been identified around mid to lower crustal transition. 相似文献
19.
《Quaternary Science Reviews》2007,26(22-24):2694-2700
Data on fluvial sequences from around the world, collected as part of IGCP 449, has allowed comparison between such records with the purpose of searching for meaningful patterns. A key finding has been that fluvial incision rates, as measured by the vertical separations of well-dated terrace deposits one from another, and from the modern valley floor (which can be used as a proxy for uplift), are often very similar in different parts of the world but vary significantly between systems on different types of crust. The collection that this paper introduces, coupled with previous IGCP 449 publications cited, confirms that the aim of a worldwide compilation of fluvial archives has been achieved, with a number of syntheses already published. 相似文献
20.
阿尔金山位于青藏高原北部边缘,在高原隆升和演化过程中扮演着重要的角色。但是,关于它的新生代隆升历史现今仍存在较大的争议。阿尔金山北麓若羌凹陷新生代接受来自山脉的剥蚀物质。因此,凹陷内的沉积特征记录了阿尔金山新生代隆升的重要信息。本文利用石油钻井编录资料及地震剖面,通过对盆地区新生代各个地层之间的接触关系、沉积相组合和沉积速率变化进行研究,结果显示阿尔金山34Ma以来的隆升分为两阶段:第一阶段为34~20.4Ma,持续低速隆升;第二阶段为16Ma至现今,急剧快速隆升。结合前人研究成果,认为渐新世—早中新世,阿尔金断裂作为一个局限在中、下地壳的韧性剪切带造成阿尔金山一带产生大范围的地表隆起,控制了山脉在第一阶段的持续低速隆升;中中新世以来,阿尔金断裂大规模左行走滑,青藏高原北缘主要通过地壳缩短的形式释放应力,控制了山脉在第二阶段的急剧快速隆升。 相似文献