首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 718 毫秒
1.
Multiscale simulation of fluvio‐deltaic stratigraphy was used to quantify the elements of the geometry and architectural arrangement of sub‐seismic‐scale fluvial‐to‐shelf sedimentary segments. We conducted numerical experiments of fluvio‐deltaic system evolution by simulating the accommodation‐to‐sediment‐supply (A/S) cycles of varying wavelength and amplitude with the objective to produce synthetic 3‐D stratigraphic records. Post‐processing routines were developed in order to investigate delta lobe architecture in relation to channel‐network evolution throughout A/S cycles, estimate net sediment accumulation rates in 3‐D space, and extract chronostratigraphically constrained lithosomes (or chronosomes) to quantify large‐scale connectivity, that is, the spatial distribution of high net‐to‐gross lithologies. Chronosomes formed under the conditions of channel‐belt aggradation are separated by laterally continuous abandonment surfaces associated with major avulsions and delta‐lobe switches. Chronosomes corresponding to periods in which sea level drops below the inherited shelf break, that is, the youngest portions of the late falling stage systems tract (FSST), form in the virtual absence of major avulsions, owing to the incision in their upstream parts, and thus display purely degradational architecture. Detailed investigation of chronosomes within the late FSST showed that their spatial continuity may be disrupted by higher‐frequency A/S cycles to produce “stranded” sand‐rich bodies encased in shales. Chronosomes formed during early and late falling stage (FSST) demonstrate the highest large‐scale connectivity in their proximal and distal areas, respectively. Lower‐amplitude base level changes, representative of greenhouse periods during which the shelf break is not exposed, increase the magnitude of delta‐lobe switching and favour the development of system‐wide abandonment surfaces, whose expression in real‐world stratigraphy is likely to reflect the intertwined effects of high‐frequency allogenic forcing and differential subsidence.  相似文献   

2.
Formation of alluvial stratigraphy is controlled by autogenic processes that mix their imprints with allogenic forcing. In some alluvial successions, sedimentary cycles have been linked to astronomically‐driven, cyclic climate changes. However, it remains challenging to define how such cyclic allogenic forcing leads to sedimentary cycles when it continuously occurs in concert with autogenic forcing. Accordingly, we evaluate the impact of cyclic and non‐cyclic upstream forcing on alluvial stratigraphy through a process‐based alluvial architecture model, the Karssenberg and Bridge (2008) model (KB08). The KB08 model depicts diffusion‐based sediment transport, erosion and deposition within a network of channel belts and associated floodplains, with river avulsion dependent on lateral floodplain gradient, flood magnitude and frequency, and stochastic components. We find cyclic alluvial stratigraphic patterns to occur when there is cyclicity in the ratio of sediment supply over water discharge (Qs/Qw ratio), in the precondition that the allogenic forcing has sufficiently large amplitudes and long, but not very long, wavelengths, depending on inherent properties of the modelled basin (e.g. basin subsidence, size, and slope). Each alluvial stratigraphic cycle consists of two phases: an aggradation phase characterized by rapid sedimentation due to frequent channel shifting and a non‐deposition phase characterized by channel belt stability and, depending on Qs/Qw amplitudes, incision. Larger Qs/Qw ratio amplitudes contribute to weaker downstream signal shredding by stochastic components in the model. Floodplain topographic differences are found to be compensated by autogenic dynamics at certain compensational timescales in fully autogenic runs, while the presence of allogenic forcing clearly impacts the compensational stacking patterns.  相似文献   

3.
Peat horizons are characteristic features of delta plains worldwide. In this study, we tested the use of peat‐based correlations to assess the deformation of Holocene strata in the Po coastal plain (Northern Italy). The Holocene stratigraphy, about 30 km inland from the modern coastline consists of a peat‐bearing, estuarine and deltaic succession, up to 23 m thick. Through the analysis of 31 core data and 100 piezocone penetration tests, we identified and mapped three 10–40 cm‐thick peat layers (T1–T3) dated to 6.6–5.8, 5.5–5.0 and 3.3–2.7 cal kyr BP respectively. These peat horizons were found to be suitable stratigraphic markers within the Holocene succession over an area of about 200 km2. The mid‐late Holocene palaeogeography, reconstructed through high‐resolution peat correlation, supported by 72 radiocarbon dates, highlights a typical upper delta plain environment, with ribbon‐shaped distributary channels and swamp interdistributary areas. Peat layers are inclined towards E‐NE with gradients that increase downsection from ~0.016% (T3) to 0.021% (T1). The gradient of the oldest peat horizon is one order of magnitude larger than the slope of the modern delta plain (~0.0025%). We infer that peat horizons accumulated during periods of low sediment supply mainly controlled by autogenic processes and were deformed after deposition. Differential compaction of underlying sedimentary strata and recent tectonic activity of the buried Apenninic thrust systems are the most likely drivers of strata deformation. Based on isochore maps, we document that higher sedimentation rates in topographically depressed areas compensated, in part at least, the ongoing deformation, keeping unaltered the topographic gradient and the depositional environment. This study demonstrates that peat‐based correlation and mapping can shed lights on the mechanisms of strata accumulation and deformation in deltaic settings, constituting a robust basis for reconstructing delta evolution.  相似文献   

4.
The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

5.
This article reports a stratigraphic and structural analysis of the Neogene‐Quaternary Valdelsa Basin (Central Italy), filled with up to 1000 m of uppermost Miocene to lower Pleistocene strata. The succession is subdivided into seven unconformity‐bounded stratigraphic units (synthems, or large‐scale depositional sequences) that include fluvio‐deltaic and shallow‐marine deposits. Structures related to basin shoulders and internal boundaries controlled the Neogene location and geometry of different depocentres. During the Tortonian‐Messinian, a buried NE‐trending high related to regional, basin‐transverse lineaments separated two adjacent sub‐basins. During the lower Pliocene, compressional displacement along NW‐trending, thrust‐related highs controlled the distribution of depocentres and dispersal of sediment. Extensional tectonics, although previously considered the dominant deformation style affecting the rear of the Northern Apennines since the late Miocene, is no longer considered a dominant control on tectono‐sedimentary development of the Valdelsa basin. Instead, the Valdelsa Basin shares features with continental hinterland basins of orogenic belts where compression, extension, and transcurrent stress fields determine a complex spatial and temporal record of accommodation and sediment supply. In the Valdelsa Basin tectonics and eustatic sea‐level fluctuations were dominant in forcing the deposition of sedimentary cycles at several scales. Zanclean and Gelasian large‐scale depositional sequences were mainly controlled by crustal shortening, whereas a eustatic signal was preferentially recorded during the Piacenzian. Smaller scale depositional sequences, common to most synthems, were controlled by orbitally forced glacio‐eustatic cycles.  相似文献   

6.
《Basin Research》2018,30(4):783-798
When we model fluvial sedimentation and the resultant alluvial stratigraphy, we typically focus on the effects of local parameters (e.g., sediment flux, water discharge, grain size) and the effects of regional changes in boundary conditions applied in the source region (i.e., climate, tectonics) and at the shoreline (i.e., sea level). In recent years this viewpoint has been codified into the “source‐to‐sink” paradigm, wherein major shifts in sediment flux, grain‐size fining trends, channel‐stacking patterns, floodplain deposition and larger stratigraphic systems tracts are interpreted in terms of (1) tectonic and climatic signals originating in the hinterland that propagate downstream; and (2) eustatic fluctuation, which affects the position of the shoreline and dictates the generation of accommodation. Within this paradigm, eustasy represents the sole means by which downstream processes may affect terrestrial depositional systems. Here, we detail three experimental cases in which coastal rivers are strongly influenced by offshore and slope transport systems via the clinoform geometries typical of prograding sedimentary bodies. These examples illustrate an underdeveloped, but potentially important “sink‐to‐source” influence on the evolution of fluvial‐deltaic systems. The experiments illustrate the effects of (1) submarine hyperpycnal flows, (2) submarine delta front failure events, and (3) deformable substrates within prodelta and offshore settings. These submarine processes generate (1) erosional knickpoints in coastal rivers, (2) increased river channel occupancy times, (3) rapid rates of shoreline movement, and (4) localized zones of significant offshore sediment accumulation. Ramifications for coastal plain and deltaic stratigraphic patterns include changes in the hierarchy of scour surfaces, fluvial sand‐body geometries, reconstruction of sea‐level variability and large‐scale stratal geometries, all of which are linked to the identification and interpretation of sequences and systems tracts.  相似文献   

7.
The role of spatiotemporally varying tectonic forcing in the development of stratigraphic patterns along passive margins and continental rift basins has been recognized for decades, but the exact nature of the stratigraphic response is still debated. This study develops a coupled tectonic‐stratigraphic numerical model with a fixed absolute lake level and constant climate conditions to quantify the signatures of spatiotemporally varying tectonic forcing on the stratigraphic record. This model consists of a three‐dimensional rift basin with a range of geomorphic features and produces a number of well‐recognized stratigraphic patterns, which are commonly interpreted to be caused by lake‐/sea‐level or climate fluctuations. This study demonstrates that the shoreline and grain‐size front are decoupled through the adjustment of the depositional slope and sediment dispersal under spatiotemporally varying tectonic forcing, especially in underfilled basins. Under such a decoupled situation, the pathway of the migrating subsidence centre correlates with the pathway of the grain‐size front, a result of competition between spatiotemporally varying tectonic forcing and autogenic sediment transport. The model results also highlight the significance of three‐dimensional variability in the stratigraphic response to tectonic forcing, which may be overlooked or misinterpreted and suggests a high degree of uncertainty in re‐establishing the base‐level cycles from the stratigraphic record alone. Moreover, spectral analysis of the modelled stratigraphy and tectonic forcing suggests that low‐frequency tectonic signals are more likely to be recorded in the stratigraphy with a lag time, whereas high‐frequency tectonic signals are likely to be shredded, mixed with autogenic signals, or buffered through sediment‐routing systems. Finally, quantitative measurements of the stratigraphic architecture of the Nanpu sag in the Bohai Bay Basin, China are used to tune the numerical model of this study to illustrate how to evaluate the role of tectonic forcing on the development of characteristic stratigraphic sequences.  相似文献   

8.
Results from analyses of the Arles‐Piton sediment core, retrieved from the apex of the Rhône Delta, highlight processes of Holocene deltaic construction controlled mainly by hydrosedimentary variability and channel avulsions. The alluvial suite was investigated for grain size, sedimentary structures, CaCO3, organic matter, heavy minerals and chrono‐stratigraphy (14C and archaeological/historical dates). The study shows the succession of six facies associations: a distributary channel (before 6157‐5843 BC), a swamp (5719‐5530/4796‐4463 BC), a distal flood plain (5719‐5530/4796‐4463 BC), a distributary channel (4796‐4463/2900‐2503 BC), a proximal flood plain (2900‐2503 BC/AD 270‐290), and a crevasse splay (after AD 270‐290). Substantial changes in hydrodynamics are strongly linked to three channel avulsions (before 6157‐5843 BC, after 4796‐4463 BC and after 2900‐2503 BC). A correlation with the whole channel avulsion history of the Rhône Delta allowed us to propose an average rhythm of channel avulsion of c. 1450 years. From 5719‐5530 BC to AD 270‐290, the flood plain aggraded at the average rate of 2.5 mm/a. The aggradation rates were higher both in the proximal and distal flood plains, where sedimentation process is continuous. They were lower both in the active distributary channels, because of frequent truncation of the alluvial suite, and the abandoned channels where detritic inputs are minimum. The sediment supply arriving to the upper Rhône Delta was derived mainly from proximal source areas (Massif Central, Southern Alps) during the last 8000 years, except during the hydrological changes of Roman antiquity during which detritic inputs were derived firstly from the Northern Alps and Southern Alps, and secondly from the Massif Central.  相似文献   

9.
Quantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: >450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: >1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.  相似文献   

10.
Sequence stratigraphy for clastic continental margins predicts the development of sand-rich turbidite deposits during specific times in relation to base-level cycles. It is now widely understood that deltas can extend to the shelf-edge forced by high sediment flux and/or base level, providing a direct connection to transfer sediment and sand to the slope and basin floor even during high base level periods. Herein, we build a stratigraphic forward model for the last 120 kyr of the fluvio-deltaic to deep-water Brazos system (USA) where sediment partitioning along an Icehouse continental margin can be evaluated. The reduced-complexity stratigraphic forward model employs geologically constrained input parameters and mass balance. The modelled architecture is consistent with the location of depositional units previously mapped in the shelf. Sand bypasses the shelf and upper slope between 35 to 15 kyr before present and only about 20%–30% of all the sediment and sand supplied to the system is transferred to deep water. Several scenarios based on the initial Brazos model investigate the relationships between base level and deep-water sand ratio (DWSR). DWSR is defined as the relative amount of sand transferred to the deep-water portions of the system subdivided by the total sand input to the model. Linear correlations between DWSR and base level change rates or base level are very poor. Short-term variability due to local processes (for example avulsions) is superimposed to the long-term trends and mask the base level signal. DWSR for an entire base-level cycle is mainly controlled by the proportion of time the delta stays docked at the shelf-edge. Stratigraphic forward models are useful to complement field observations and quantify how different processes control stratigraphy, which is important for making predictions in areas with limited information.  相似文献   

11.
The Po River Basin, where accumulation and preservation of thick sedimentary packages are enhanced by high rates of tectonic subsidence, represents an ideal site to assess the relations between vertical changes in stratigraphic architecture and sediment accumulation rates. Based on a large stratigraphic database, a markedly contrasting stratigraphy of Late Pleistocene and Holocene deposits is reconstructed from the subsurface of the modern alluvial and coastal plains. Laterally extensive fluvial channel bodies and related pedogenically modified muds of latest Pleistocene age are unconformably overlain by Holocene overbank fines, grading seaward into paralic and nearshore facies associations. In the interfluvial areas, a stiff paleosol, dating at about 12.5–10 cal ky BP, marks the Pleistocene–Holocene boundary. Across this paleosol, aggradation rates (ARs) from 16 radiocarbon‐dated cores invariably show a sharp increase, from 0.1–0.9 mm year?1 to 0.9–2.9 mm year?1. Comparatively lower Pleistocene values are inferred to reflect fluvial activity under a low‐accommodation (lowstand and early transgressive) regime, whereas higher ARs during the Holocene are related to increasing accommodation under late transgressive and highstand conditions. Holocene sediment accumulation patterns vary significantly from site to site, and do not exhibit common trends. Very high accumulation rates (20–60 mm year?1) are indicated by fluvial channel or progradational delta facies, suggesting that extremely variable spatial distribution of Holocene ARs was primarily controlled by autogenic processes, such as fluvial channel avulsion or delta lobe switching. Contrasting AR between uppermost Pleistocene and Holocene deposits also are reported from the interfluves of several coeval, alluvial‐coastal plain systems worldwide, suggesting a key control by allogenic processes. Sediment accumulation curves from adjacent incised valley fills show, instead, variable shapes as a function of the complex mechanisms of valley formation and filling.  相似文献   

12.
The Holocene avulsion history of the lower Brazos alluvial valley of east Texas, USA, was studied using 10 drill cores, 26 radiocarbon dates, aerial photos, and a digital elevation model. This study shows that two long-term processes, aggradation and localized valley tilting (along a normal listric fault), are responsible for generating two styles of avulsion. The first process precedes avulsion-by-progradation, while the second process precedes avulsion-by-annexation. As valley aggradation migrated updip over the last 7.5 ka, three regional backstepping avulsions occurred along the lower 140 km of the valley and each generated sizable deposits. A pattern emerges of landward stepping progradational avulsions tracking the locus of valley aggradation and of valley aggradation migrating inland even after the rate of sea level rise diminishes. At the same time, several local nodal avulsions occurred between 50 and 55 km updip of the current highstand shoreline but generated no observable deposits. Geomorphic evidence indicates that, since the late Pleistocene, active movement along a previously undocumented normal listric fault has occurred at the location of the nodal avulsion. These two long-term processes do not operate mutually exclusive of each other to promote avulsions; rather, they operate concurrently. Only aggradation promotes avulsions that affect floodplain alluviation, although the total volume of these deposits comprises a small portion of the valley fill.  相似文献   

13.
ABSTRACT This paper investigates syn‐rift stratigraphic architecture and facies relationships along a 7 km long strike section towards the tip of a major, basin‐bounding normal fault segment (Thal Fault) in the Suez Rift, Egypt. In this location, the fault is composed of two precursor fault strands, Gushea and Abu Ideimat, linked by a jog or transfer fault. We document a Miocene syn‐rift succession, deposited more than c. 5.5 Myr after rift initiation, that is composed of a range of carbonate‐clastic facies associated with coarse‐grained deltaic, shoreface and offshore depositional systems. Key regionally correlatable stratal surfaces within this succession define time equivalent stratal units that exhibit variability in thickness and architecture, related to the interplay of both regional and local controls, in particular, the evolution of two, small‐scale (<6 km long) precursor fault strands (Gushea and Abu Ideimat). Integration of structural and stratigraphic data indicates that the boundary (relay ramp) between these two fault strands was a relative high during much of the rift event, with hard‐linkage and considerable displacement accumulation not occurring until at least c. 7.5 Myr after rift initiation. This is because: (i) the preserved stratigraphy is thinner in the hanging wall of the strand boundary; (ii) a eustatic sea‐level fall with an amplitude of 100 m generated more than 25 m of incision at the strand boundary, a region that has a final fault displacement of c. 600 m; and (iii) the fault strand boundary persisted as a footwall low and transport pathway for coarse‐grained deltas entering the basin. This study indicates that variability in stratal thickness and stratigraphic architecture towards the tip of the Thal Fault was related to the linkage history of two small‐scale (c. 6 km long) precursor fault segments. We suggest that similar, small‐scale stratal variability may occur repeatedly along the entire length of major basin‐bounding fault segments due to the process of fault growth by the linkage of smaller scale precursor strands.  相似文献   

14.
Grade index (Gindex) is a dimensionless number given as the volume-in-unit-time ratio of subaerial allocation to both subaerial and subaqueous allocations of sediment supplied to a delta from upstream. It was originally proposed for understanding the effect of basin water depth on the morphodynamics of delta distributary channels under stationary relative sea level. We here examine how rising relative sea level modulates the Gindex, using geometrical reasoning and numerical simulations. We find that the grade index model can account for autoretreat of the deltaic shoreline, autodrowning of the whole system, and autobreak of the deltaic sedimentation, all of which are the consequences of autogenic nonequilibrium responses to steadily rising relative sea level. The regressive-to-transgressive threshold (i.e. the onset of autoretreat) is crossed when the delta plain's dimensionless basal area (At*) encounters a critical value that is expressed in terms of Gindex: regression and transgression are sustained when At* is below and above the threshold, respectively. The mode of transgression depends on the slope conditions. If the hinterland slope (γ) is steeper than the foreset slope (β), both At* and Gindex decrease as the relative sea-level rises. Eventually, the depositional system experiences autodrowning when At* = Gindex = 0. If γ < β; on the other hand, both At* and Gindex increase. This latter slope condition eventually causes autobreak of the deltaic sedimentation, afterward of which At* = Gindex = 1. The grade index model is useful for interpreting and predicting the stratigraphic responses of natural deltaic clinoforms in conditions of rising relative sea level.  相似文献   

15.
Recent advances in our understanding of palaeovalleys are largely guided by examples from passive margins, in which accommodation increases down depositional dip. This study tests these models against a dataset from the Pennsylvanian Breathitt Group of the central Appalachian foreland basin, USA. This fluvio‐deltaic succession contains extensive erosionally based fluvio‐estuarine sand bodies that can be tracked over 80 km down depositional dip from a proximal zone of high accommodation close to the orogenic margin to a distal, lower accommodation zone close to the cratonic margin of the basin. The sand bodies are up to 25 m thick, multi‐storey and characterized in their lower parts by strongly amalgamated storeys containing sandy fluvial to estuarine bar accretion elements, and in their middle to upper parts by more fully preserved storeys up to 10 m thick and laterally extensive over 100s of metres. The upper storeys include abandonment channel‐fills of heterolithic marine or marginal marine deposits or muddy to sandy point‐bar elements. Three major regional‐scale architectures include: (i) Tabular sand bodies that everywhere incise open marine prodelta and mouth bar facies and are interpreted as palaeovalleys formed during falling stage and lowstand systems tracts, when eustatic sea‐level fall outpaced tectonic subsidence across the entire study area. (ii) Sand bodies that incise genetically related floodplain lake and/or bay‐fill minor mouth bar deposits up depositional dip and open marine prodelta and mouth bar facies down dip. These stacked distributary channel deposits map down dip into palaeovalleys and formed when up dip subsidence rate resulted in positive, but reduced rate of accommodation creation, while lower tectonic subsidence rate down‐dip resulted in incision. (iii) Sand bodies that incise genetically related floodplain, lake and/or bay‐fill minor mouth bars up dip and pass down‐dip into genetically related unconfined floodplain, prodelta and mouth bar deposits. These sand bodies represent stacked distributary channel fills and channel amalgamation was the product of high rates of lateral migration, typical of the behaviour of channels above their backwater reach. Case (2) sand bodies demonstrate that in rapidly subsiding foreland basins, cross‐shelf palaeovalleys may form down depositional dip from aggradational, distributive fluival strata. Additionally, the genetic relationship between stacked distributary channels and palaeovalleys supports recent models for palaeovalley formation that emphasize diachronous, cut‐and‐fill during falling stage and lowstands of relative sea level.  相似文献   

16.
Abstract Low‐angle detachment faults and thrust‐sheet top basins are common features in foreland basins. However, in stratigraphic analysis their influence on sequence architecture is commonly neglected. Usually, only eustatic sea level and changing flexural subsidence are accounted for, and when deformation is considered, the emphasis is on the generation of local thrust‐flank unconformities. This study analyses the effects of detachment angle and repetitive detachment activation on stratigraphic stacking patterns in a large thrust‐sheet top basin by applying a three‐dimensional numerical model. Model experiments show that displacement over low‐angle faults (2–6°) at moderate rates (～5.0 m kyr?1) results in a vertical uplift component sufficient to counteract the background flexural subsidence rate. Consequently, the basin‐wide accommodation space is reduced, fluvio‐deltaic systems carried by the thrust‐sheet prograde and part of the sediment supply is spilled over towards adjacent basins. The intensity of the forced regression and the interconnectedness of fluvial sheet sandstones increases with the dip angle of the detachment fault or rate of displacement. In addition, the delta plain is susceptible to the formation of incised valleys during eustatic falls because these events are less compensated by regional flexural subsidence, than they would be in the absence of fault displacement.  相似文献   

17.
《Basin Research》2018,30(Z1):101-123
Due to the multiple controlling factors involved, it is a challenging task to identify and quantify the processes influencing the distribution and heterogeneity of marine organic‐rich rocks. To improve our understanding of these deposits, we model their burial history and stratigraphic evolution as well as processes linked to marine organic matter history throughout the Lower Jurassic in of the Northern Lusitanian Basin (Western Iberian Margin). This 15‐Ma‐long interval is modelled using 100‐kyr time steps to simulate lithologies and organic matter heterogeneity as layers with a thickness of 2–5 m, depending on the sedimentation rate in the basin. The model is calibrated by well and outcrop data which provide structural and biostratigraphic constraints, as well as information on the depositional facies and geochemistry of the sediments. The results show that the presence of organic‐rich intervals is linked to first‐order variations in the basin geometry and sedimentation rates. Without considering any variation of primary productivity or oxygen content in surface sea waters, the parameters of basin geometry and sedimentation rate are sufficient to predict the main characteristics of source rocks, i.e. their occurrence, thickness and mineralogy at the basin scale. However, to fit the measured organic carbon contents, we need to take account of other parameters such as variations of primary productivity or changes in dissolved oxygen concentration.  相似文献   

18.
ABSTRACT The Eridanos fluvio‐deltaic system, draining most of north‐western Europe, developed during the Late Cenozoic as a result of simultaneous uplift of the Fennoscandian shield and accelerated subsidence in the North Sea Basin. This seismo‐stratigraphic study aims to reconstruct the large‐scale depositional architecture of the deltaic portion of the basin fill and relate it to external controls. A total of 27 units have been recognized. They comprise over 62×103 km3 in the Southern North Sea Basin alone, and have an average delta surface area of 28×103 km2, which suggests that the size of the drainage area was about 1.1×106 km2. Water depth in the depocentre is seen to decrease systematically over time. This trend is interrupted by a deepening phase between 6.5 and 4.5 Ma that can be correlated with the simultaneous occurrence of increased uplift of the Fennoscandian shield, increased subsidence of the Southern North Sea Basin, and a long‐term eustatic highstand. All these observations point to a tectonic control on long‐term average rates of accommodation and supply. Controls on short‐term variations are inferred from variations in rates of sediment supply and bifurcation of the delta channel network. Both rates were initially low under warm, moist, relatively stable climate conditions. The straight wave‐dominated delta front gradually developed into a lobate fluvial‐dominated delta front. Two high‐amplitude sea‐level falls affected the Pliocene units, which are characterized by widespread delta‐front failures. Changes in relative sea level and climate became more frequent from the late Pliocene onward, as the system experienced the effects of glacial–interglacial transitions. Peaks in sedimentation and bifurcation rates were coeval with cold (glacial) conditions. The positive correlation between rates of supply and bifurcation on the one hand, and climate proxies (pollen and δ18O records) on the other hand is highly significant. The evidence presented in this study convincingly demonstrates the control of climate on time‐averaged sediment supply and channel‐network characteristics, despite the expected nonuniformity and time lags in system response. The presence of a clearly discernible climate signal in time‐averaged sediment supply illustrates the usefulness of integrated seismo‐stratigraphic studies for basin‐wide analysis of delta evolution on geological time scales.  相似文献   

19.
A Bayesian approach to inverse modelling of stratigraphy, part 1: method   总被引：2，自引：0，他引：2  
The inference of ancient environmental conditions from their preserved response in the sedimentary record still remains an outstanding issue in stratigraphy. Since the 1970s, conceptual stratigraphic models (e.g. sequence stratigraphy) based on the underlying assumption that accommodation space is the critical control on stratigraphic architecture have been widely used. Although these methods considered more recently other possible parameters such as sediment supply and transport efficiency, they still lack in taking into account the full range of possible parameters, processes, and their complex interactions that control stratigraphic architecture. In this contribution, we present a new quantitative method for the inference of key environmental parameters (specifically sediment supply and relative sea level) that control stratigraphy. The approach combines a fully non‐linear inversion scheme with a ‘process–response’ forward model of stratigraphy. We formulate the inverse problem using a Bayesian framework in order to sample the full range of possible solutions and explicitly build in prior geological knowledge. Our methodology combines Reversible Jump Markov chain Monte Carlo and Simulated Tempering algorithms which are able to deal with variable‐dimensional inverse problems and multi‐modal posterior probability distributions, respectively. The inverse scheme has been linked to a forward stratigraphic model, BARSIM (developed by Joep Storms, University of Delft), which simulates shallow‐marine wave/storm‐dominated systems over geological timescales. This link requires the construction of a likelihood function to quantify the agreement between simulated and observed data of different types (e.g. sediment age and thickness, grain size distributions). The technique has been tested and validated with synthetic data, in which all the parameters are specified to produce a ‘perfect’ simulation, although we add noise to these synthetic data for subsequent testing of the inverse modelling approach. These tests addressed convergence and computational‐overhead issues, and highlight the robustness of the inverse scheme, which is able to assess the full range of uncertainties on the inferred environmental parameters and facies distributions.  相似文献   

20.
We developed a seismic geomorphology-based procedure to enhance traditional trajectory analysis with the ability to visualize and quantify lateral variability along carbonate prograding-margin types (ramps and rimmed shelves) in 3D and 4D. This quantitative approach analysed the shelf break geometric evolution of the Oligo-Miocene carbonate clinoform system in the Browse Basin and delineated the feedback between antecedent topography and carbonate system response as controlling factor on shelf break rugosity. Our geometrical analysis identified a systematic shift in the large-scale average shelf break strike direction over a transect of 10 km from 62° to 55° in the Oligo-Miocene interval of the Browse Basin, which is likely controlled by far-field allogenic forcing from the Timor Trough collision zone. Plotting of 3D shelf break trajectories represents a convenient way to visualize the lateral variability in shelf break evolution. Shelf break trajectories that indicate contemporaneous along-strike progradation and retrogradation correlate with phases of autogenic slope system re-organization and may be a proxy for morphological stability of the shelf break. Shelf break rugosity and shelf break trajectory rugosity are not inherited parameters and antecedent topography does not dictate long-term differential movement of the shelf margin through successive depositional sequences. The autogenic carbonate system response to antecedent topography smooths high-rugosity areas by filling accommodation and maintains a relatively constant shelf break rugosity of ~150 m. Color-coding of the vertical component in the shelf break trajectory captures the creation and filling of accommodation, and highlights areas of the transect that are likely to yield inconsistent 2D sequence stratigraphic interpretations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号