共查询到20条相似文献，搜索用时 62 毫秒
1.
颅内动脉狭窄（ICAS）导致的缺血性脑卒中,具有高致残率和致死率的特点。临床上常规检查方法包括经颅多普勒超声、CT血管造影、磁共振血管造影和X射线数字减影血管造影等,上述方法都是针对血管狭窄,不能显示血管壁病变。高分辨磁共振血管壁成像技术（HR-VWI）是一种新出现的影像学检查手段,能够无创性显示血管壁病变,对判断ICAS病变性质具有重要价值。本文针对HR-VWI在ICAS病因鉴别中的应用研究进展进行综述。 相似文献
2.
光学弱相干层析成像进展 总被引：6，自引：0，他引：6
光学弱相干层析成像技术结合了共焦、弱相干、光外差及扫描层析成像等技术的优点,可实现无损伤、在体检测,具有较高的探测灵敏度和分辨率,可望在生物组织活检中获得广泛应用。本文在讨论ＯＣＴ基本原理的基础上,介绍了ＯＣＴ系统的若干应用,如龋齿、体内器官粘膜的成像检测和对血管结构与血流动力学的成像检测等。 相似文献
3.
Wang Weidong Bai Kezhuang Zu Donglin Bao Shanglian Jerome Z. Liang )The Biomedical engineering research office Chinese PLA General Hospital Beijing )Beijing document service Beijing )The 《CT理论与应用研究》1998,7(4):44-49
许多共振成像（ＭＲＩ）的应用,要求人体组织磁化强度的空间分布Ｆｏｕｒｉｅｒ变换的幅度和相位的精确分离,及利用正交双通道采集时间和空间高分辨图象序列。在传统的基于Ｆｏｕｒｉｅｒ变换的成象方法中,图象序列从一帧空间编码独立地重建得到,因此给定空间分辨率的情况下,每帧空间编码的数量限制了图象序列的时间分辨力;又常通过牺牲空间分辨率来提高图象序列的空间分辨录。由于传统Ｆｏｕｒｉｅｒ变换的核函数是线性相位,若变换ＭＲＩ技术必须很好地满足主磁场均匀性和梯度场线性的条件,因此传统Ｆｏｕｒｉｅｒ变换成象方法对临床应用中常出现ＭＲ信号相位失真极为敏感。本文提出：利用主磁场中组织的磁化强度不变,能很好消除图象的相位失真。 相似文献
4.
在地层孔隙度比较低的情况下,由于受放射性统计涨落以及地层中其它核反应所产生的伽马射线的影响,传统的碳氧比能谱测井解释的分辨率不高。这些伽马射线形成了碳氧比能谱测井的本底,本底越高,碳氧比值精度越差。因此,必须设法降低本底值来提高谱线的分辨率。本文通过反褶积技术来提高谱线的分辨率,应用修正的高斯函数作为系统响应函数对测井曲线进行反褶积;采用修正的 Blackman 窗函数来消除放射性统计涨落的高频噪声,通过实际资料验证,利用"反褶积-开窗"法对碳氧比能谱测井的谱线进行处理以及用变系数法求取非弹性散射伽马谱,提高了测井资料对油、水储集层的分辨率,对油田的合理开发及油藏管理具有重要的现实意义。 相似文献
5.
《地球物理学进展》2020,(3)
随着我国主要海域的天然气水合物勘探逐步进入详查和开采阶段,对深海天然气水合物矿体空间分布的探查精度要求显著提高,而海洋常规多道地震探测系统分辨率不足,难以满足现阶段深海天然气水合物资源详查、勘探和开发的需要.本文详细阐述了深拖多道高分辨率地震探测技术探测方式及其特点,分析对比了深拖多道地震技术与常规海洋多道地震技术、短排列小道距地震技术及OBC地震技术相比的优越性;总结了国外深拖多道高分辨率地震探测装备以及在精细识别BSR、海底冷泉及海底麻坑等的应用效果.因为深拖多道高分辨率地震探测技术是将震源与采集缆拖曳与近海底(约100 m)且震源具有高主频、宽频带的特点,从而降低了勘探海洋噪声对地震信号的影响,缩短了与被探测目标的距离,降低了地震信号在传播过程中海水的吸收衰减,并且能够克服海面拖曳地震勘探中多次波、气泡效应的影响,所以其具有很高的纵向分辨率和横向分辨率以及高信噪比特点,将在天然气水合物勘探以及海洋工程领域具有极大的应用价值. 相似文献
6.
工业CT技术在卫星产品检测中的应用 总被引：2，自引：0，他引：2
卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。 相似文献
7.
探地雷达(Ground Penetrating Radar, GPR)以其快速、无损和高分辨率等优势已被广泛应用于道路地下病害体的排查应用.针对传统时域单主频天线GPR在勘探深度和分辨率上的局限性,本文提出了一种基于双主频高动态GPR检测系统的道路地下病害检测方法,通过二维正演,模拟道路地下典型病害体的电磁响应,获得病害体的典型GPR特征图谱,为实际病害的客观判读和科学解译提供理论依据.并以某区道路地下病害的实测GPR数据为例,给出了双主频高动态GPR采集的参数设置及数据分析流程.钻探验证结果表明,高频回波信号对浅部薄层具有较高分辨率,能较清晰地识别3 m以上浅部病害体,低频回波信号具有较高信噪比,能有效识别3 m以下深部病害体,兼顾了探测深度和纵向分辨率的双主频GPR检测系统,能较好地识别地下病害类型、位置、埋深及影响范围,可为城市道路病害排查与防治提供技术支持. 相似文献
8.
时频分析技术是描述和分析非平稳信号的有效工具,如何提高谱分解的时-频分辨率受到了国内外学者的广泛关注.基于稀疏约束反演的谱分解方法(ISD)是近些年提出的一种具有高时-频分辨率的谱分解方法.然而传统ISD方法采用复雷克子波作为母小波函数,很大程度限制了信号分析的分辨率和精度.本文创新性地将传统ISD方法拓展到其他线性变换当中,提高了ISD方法的适用性.利用合成数据测试并对比了传统方法与ISD方法的时频分析结果,研究表明ISD方法不但能提供高分辨率的振幅谱,还能提供可靠的时-频相位谱信息.在此基础上,本文提出将高时-频分辨率的ISD方法与频变AVO(FAVO)反演相结合,得到能指示流体的地震波频散属性.将该方法应用于实际资料,结果表明基于ISD时频方法的FAVO反演结果具有更高的分辨率和准确度,对于储层油气具有更好的指示作用. 相似文献
9.
叠后地震数据的谱反演处理技术及其应用浅析 总被引：1，自引：0，他引：1
受限于现有三维地震资料的分辨能力,薄储层、小断裂等小尺度地质目标识别难题始终影响着岩性油气藏勘探开发的精度.基于高分辨地震分频技术的谱反演处理技术为提高薄层识别与预测精度提供了一条新的思路和方法.在原始叠后地震数据基础上开展谱反演处理,可获得全频带地震反射系数序列数据.该数据具有很高的分辨率,完全可以用于微小级别地质体及地质体内部细节的描述与形态刻画.本文对谱反演处理技术的基本原理和实现方法进行了简要阐述,并将其应用到实际生产资料中.实例应用表明,谱反演处理获得的反射系数数据成果分辨率非常高,可清晰识别目标薄储层反射特征及各类层序变化边界,有较强的实用和应用价值. 相似文献
10.
首先分析了获取数字高程模型(DEM)的高分遥感立体测量、合成孔径雷达干涉测量技术、激光雷达测距技术和运动重建技术等技术手段,以及现阶段高空间分辨率数字高程模型(VHR DEM)提取技术的主要特点,实际应用中需根据研究区地形地貌特点选择合适的VHR DEM获取技术;然后,结合最新研究成果着重阐述了VHR DEM在活断层识别及几何结构分析、同震位移与累积位移获取和古地震研究等领域的最新应用;最后指出,VHR DEM由于其高精度、高空间分辨率的特点,正逐步改变传统活断层的研究方法,使得对活断层的研究进入到了前所未有的精细化水平. 相似文献
11.
12.
M. N. French R. L. Bras W. F. Krajewski 《Stochastic Environmental Research and Risk Assessment (SERRA)》1992,6(1):27-45
A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities. 相似文献
14.
《地震工程与工程振动(英文版)》2014,(4)
正This journal is established by the Institute of Engineering Mechanics(IEM),China Earthquake Administration,to promote scientific exchange between Chinese and foreign scientists and engineers so as to improve the theory and practice of earthquake hazards mitigation,preparedness,and recovery.To accomplish this purpose,the journal aims to attract a balanced number of papers between Chinese and 相似文献
15.
O. Martins 《水文研究》1988,2(1):19-29
Water quality analyses for the Niger River for the 1980/81 hydrological year are presented. The samples were collected from the main river at Lokoja, and from two main tributaries, the Kaduna and the Benue Rivers. Different water types were distinguished by the concentrations of major ions. The type Ca > Na > Mg > K - HCO3 > SO4 > Cl was represented at all stations during at least part of the year. Chloride was found to dominate the sulphate ion in the Kaduna and Niger, while the Benue maintained a higher concentration of sulphate relative to chloride all year round. Distinct patterns of seasonal variation in the ion concentrations were observed, particularly for the samples collected at Lokoja. Low ion concentrations were prominent during periods of high discharge, while low flow periods coincided with high dissolved ion concentrations. The contribution of rainwater to the total dissolved solids in the river waters was assessed indirectly using rainwater chemistry data from the Gulf of Guinea. The estimated rainwater contribution to the Lower Niger amounts to 5.15 mg 1?1. Geochemical weathering calculations involving reactions of the four major minerals of granitic rocks - anorthite, biotite, albite, and K-feldspar - with carbon dioxide and water, can account for the average water composition of the Lower Niger. The proportion of the ionic components was also related to the occurrence of the respective element in the minerals. 相似文献
16.
Historical earthquakes noted in the written records of the South China region, including Hong Kong, are not well delineated along identified prominent fault sources. Despite the lack of any definitive, localised trend in the spatial distribution of seismic activity in the region, there does appear to be some major disparity in the seismic activity rates (especially for large magnitude earthquakes) between the near-field and the far-field regions of Hong Kong. Despite this observation, previous studies of the regional seismic activity and seismic ground motion hazard (the latter using a probabilistic seismic hazard assessment, PSHA) have considered very broad source zone regions, in which uniform levels of seismic activity have been assumed. The present paper further scrutinises this broad source zone (BSZ) approach by adopting a novel expanding circular disc (ECD) method to determine the rates of earthquake recurrence. Such a method is intended to counter-check previously developed models by determining earthquake scenario events in terms of magnitude–distance (M–R) pairs or combinations, having defined values of average return period. Unlike the BSZ approach, the ECD method specifically accounts for the supposed variations in the seismic activity rates between events in the near-field and the far-field of Hong Kong.The form of the developed method is particularly suited to the determination of design-level earthquake ground motions for bedrock sites, since it assumes a directionally-independent attenuation model as described in the companion paper. It is found that, whilst the BSZ approach may indicate the overall average levels of hazard that are representative of the South China region as a whole, it does not capture the large disparity in seismic activity rates between near-field and far-field events. This important feature is expected to have a significant impact upon engineering assessments of the seismic safety of structures in Hong Kong and elsewhere in the South China region. For example, it is found that for events with M≥6, the seismic activity rate (normalised by time and area) in the very far-field is around 3.5 times larger than in the near-field and medium-field of Hong Kong. The resulting design M-R combinations, covering a range of return periods from 70 to 2500 years, are limited, for very long return periods and for distant events, by the maximum credible earthquake (MCE) magnitude. Intensive research to determine this seismic hazard parameter is recommended, in order to refine further the results of the ECD analysis, which presently conservatively assumes the MCE to range between M=6 in the near-field of Hong Kong to M=8 in the very far-field, at distances greater than 280 km from Hong Kong. 相似文献
17.
Depositional ages and characteristics of Middle–Upper Jurassic and Lower Cretaceous lacustrine deposits in southeastern Mongolia 
下载免费PDF全文
下载免费PDF全文 Hitoshi Hasegawa Hisao Ando Noriko Hasebe Niiden Ichinnorov Tohru Ohta Takashi Hasegawa Masanobu Yamamoto Gang Li Bat‐Orshikh Erdenetsogt Ulrich Heimhofer Takayuki Murata Hironori Shinya G. Enerel G. Oyunjargal O. Munkhtsetseg Noriyuki Suzuki Tomohisa Irino Koshi Yamamoto 《Island Arc》2018,27(3)
Lower Cretaceous lacustrine oil shales are widely distributed in southeastern Mongolia. Due to the high organic carbon content of oil shale, many geochemical studies and petroleum exploration have been conducted. Although most of the oil shales are considered to be Early Cretaceous in age, a recent study reveals that some were deposited in the Middle Jurassic. The present study aims at establishing depositional ages and characteristics of the Jurassic and Cretaceous lacustrine deposits in Mongolia. The Lower Cretaceous Shinekhudag Formation is about 250 m thick and composed of alternating beds of shale and dolomite. The Middle Jurassic Eedemt Formation is about 150 m thick and composed of alternating beds of shale, dolomitic marl, and siltstone. The alternations of shale and dolomite in both formations were formed by lake level changes, reflecting precipitation changes. Shales were deposited in the center of a deep lake during highstand, while dolomites were formed by primary precipitation during lowstand. Based on the radiometric age dating, the Shinekhudag Formation was deposited between 123.8 ±2.0 Ma and 118.5 ±0.9 Ma of the early Aptian. The Eedemt Formation was deposited at around 165–158 Ma of Callovian–Oxfordian. The calculated sedimentation rate of the Shinekhudag Formation is between 4.7 ±2.6 cm/ky and 10.0 ±7.6 cm/ky. Shales in the Shinekhudag Formation show micrometer‐scale lamination, consisting of algal organic matter and detrital clay mineral couplets. Given the average thickness of micro‐laminae and calculated sedimentation rate, the micro‐lamination is most likely of varve origin. Both Middle–Upper Jurassic and Lower Cretaceous lacustrine oil shales were deposited in intracontinental basins in the paleo‐Asian continent. Tectonic processes and basin evolution basically controlled the deposition of these oil shales. In addition, enhanced precipitation under humid climate during the early Aptian and the Callovian–Oxfordian was another key factor inducing the widespread oil shale deposition in Mongolia. 相似文献
18.
A. C. LIAKOPOULOS Dr. Eng. 《水文科学杂志》2013,58(1):69-110
ABSTRACT The one-dimensional transient downward entry of water in unsaturated soils is investigated theoretically. The mathematical equation describing the infiltration process is derived by combining Darcy's dynamic equation of motion with the continuity and thermodynamic state equations adjusted for the unsaturated flow conditions. The resulting equation together with the corresponding initial and boundary conditions constitues a mathematical initial boundary value problem requiring the solution of a nonlinear partial differential equation of the parabolic type. The volumetric water content is taken as the dependent variable and the time and the position along the vertical direction are taken as the independent variables. The governing equation is of such nature that a solution exists for t > 0 and is uniquely determined if two relationships are defined, together with the specified state of the system, at the initial time t = 0 and at the two boundaries. The two required relations are those of pressure versus permeability and pressure versus volumetric water content. Since the partial differential equation has strong non-linear terms, a discrete solution is obtained by approximating the derivatives with finite-differences at discrete mesh points in the solution domain and integrated for the corresponding initial and boundary conditions. The use of an implicit difference scheme is employed in order to generate a system of simultaneous non-linear equations that has to be solved for each time increment. For n mesh points the two boundary conditions provide two equations and the repetition of the recurrence formula provides n—2 equations, the total being n equations for each time increment. The solution of the system is obtained by matrix inversion and particularly with a back-substitution technique. The FORTRAN statements used for obtaining the solution with an electronic digital computer (IBM 704) are presented together with the input data. Analysis of the errors involved in the numerical solution is made and the stability and convergence of the solution of the approximate difference equation to that of the differential equation is investigated. The method applied is that of making a Fourier series expansion of a whole line of errors and then following the progress of the general term of the series expansion and also the behavior of each constituent harmonic. The errors (forming a continuous function of points in an abstract Banach space) are represented by vectors with the Fourier coefficients constituting a second Banach space. The amplification factor of the difference equation is shown to be always less than unity which guarantees the stability of the employed implicit recurrence scheme. Experiments conducted on a vertical column packed uniformly with very fine sand, show a satisfactory agreement between the theoretically and experimentally obtained values. Many experimental results are shown in an attempt to explain the infiltration phenomenon with emphasis on the shape and movement of the wet front, and the effects of the degree of compaction, initial water content and deaired water on the infiltration rate. 相似文献
19.
Church repair swarms and earthquakes in Rhodes Island, Greece 总被引：1，自引：0，他引：1
20.
GHODRAT TORABI 《Island Arc》2012,21(3):215-229
Late Permian trondhjemites in the Anarak area occur as stocks and dykes, which cross cut the Anarak ophiolite and its overlying metasedimentary rocks, and are exposed along the northern Anarak east–west main faults. These leucocratic intrusive bodies have enclaves of all ophiolitic units and metamorphic rocks. They are composed of amphibole, plagioclase (oligoclase), quartz, zircon and muscovite. Secondary minerals are chlorite (pycnochlorite), epidote, albite, magnetite and calcite. Whole‐rock major‐ and trace‐element analyses reveal that they are characterized by high SiO 2 (67.8–71.0 wt%), Al 2 O 3 (14.9–17.1 wt%) and Na 2 O (5.3–8.6 wt%), low K 2 O (0.1–1.5 wt%; average: 0.8 wt%), low Rb/Sr ratio (0.01–0.40; average: 0.09), low Y (3–6 ppm), negative Ti, Nb and Ta anomalies, slightly negative or positive Eu anomaly, LREE enrichment and fractionated HREE. These rocks present 2 to 40 times enrichment in inclined chondrite‐normalized REE patterns. Geochemical characteristics of the Anarak trondhjemites all reflect melting of a mafic protolith at more than 10 kbar. The field evidence and whole‐rock chemistry reveal that these rocks have been crystallized from magmas derived from melting of subducted Anarak oceanic crust. This study reveals that melting of garnet amphibolite was an important element of continent formation in the study area. 相似文献