首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Post-earthquake damages investigation in past and recent earthquakes has illustrated that the building structures are vulnerable to severe damage and/or collapse during moderate to strong ground motion. Among the possible structural damages, seismic induced pounding has been commonly observed in several earthquakes. A parametric study on buildings pounding response as well as proper seismic hazard mitigation practice for adjacent buildings is carried out. Three categories of recorded earthquake excitation are used for input excitations. The effect of impact is studied using linear and nonlinear contact force model for different separation distances and compared with nominal model without pounding consideration. The severity of the impact depends on the dynamic characteristics of the adjacent buildings in combination with the earthquake characteristics. Pounding produces acceleration and shear forces/stresses at various story levels that are greater than those obtained from the no pounding case, while the peak drift depends on the input excitation characteristics. Also, increasing gap width is likely to be effective when the separation is sufficiently wide to eliminate contact. Furthermore, it is effective to provide a shock absorber device system for the mitigation of impact effects between adjacent buildings with relatively narrow seismic gaps, where the sudden changes of stiffness during poundings can be smoothed. This prevents, to some extent, the acceleration peaks due to impact. The pounding forces exerted on the adjacent buildings can be satisfactorily reduced.  相似文献   

2.
During strong earthquakes, adjacent structures with non-sufficient clear distances collide with each other. In addition to such a pounding, cross interaction of adjacent structures through soil can exchange the vibration energy between buildings and make the problem even more complex. In this paper, effects of both of the mentioned phenomena on the inelastic response of selected steel structures are studied. Number of stories varied between 3 and 12 and different clear distances up to the seismic codes prescribed value are considered. The pounding element is modeled within Opensees. A coupled model of springs and dashpots is utilized for through-the-soil interaction of the adjacent structures, for two types of soft soils. The pounding force, relative displacements of stories, story shears, and plastic hinge rotations are compared for different conditions as the maximum responses averaged between seven consistent earthquakes. As a result, simultaneous effects of pounding and structure–soil–structure interaction are discussed.  相似文献   

3.
Two-storey-building frames have been designed and built in an effort to investigate the pounding phenomenon of adjacent buildings during earthquakes. Static tests have been first performed to determine the static characteristics and the support conditions of the test structures. Sinusoidal and random acceleration signal tests have been subsequently performed to determine the dynamic characteristics of the test structures. Two series of tests were carried out using the shaking table simulator. In the first case, the dynamic response has been recorded without pounding, while in the second case, the test structures have been placed with zero-gap separation and pounding was induced. Input energy time histories were correlated and compared with and without pounding. The experimental results were compared with analytical ones based on a formulation of the contact impact problem by the Lagrange multiplier method. Good agreement between the experimental and the analytical results was achieved.  相似文献   

4.
The dynamic response of tall civil structures due to earthquakes is very important to civil engineers. Structures exposed to earthquakes experience vibrations that are detrimental to their structural components. Structural pounding is an additional problem that occurs when buildings experience earthquake excitation. This phenomena occurs when adjacent structures collide from their out‐of‐phase vibrations. Many energy dissipation devices are presently being used to reduce the system response. Tuned mass dampers (TMD) are commonly used to improve the response of structures. The stiffness and damping properties of the TMD are designed to be a function of the natural frequency of the building to which it is connected. This research involves attaching adjacent structures with a shared tuned mass damper (STMD) to reduce both the structures vibration and probability of pounding. Because the STMD is connected to both buildings, the problem of tuning the STMD stiffness and damping parameters becomes an issue. A design procedure utilizing a performance function is used to obtain the STMD parameters to result in the best overall system response. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

5.
Many closely located adjacent buildings have suffered from pounding during past earthquakes because they vibrated out of phase.Furthermore,buildings are usually constructed on soil;hence,there are interactions between the buildings and the underlying soil that should also be considered.This paper examines both the interaction between adjacent buildings due to pounding and the interaction between the buildings through the soil as they affect the buildings’ seismic responses.The developed model consists of adjacent shear buildings resting on a discrete soil model and a linear viscoelastic contact force model that connects the buildings during pounding.The seismic responses of adjacent buildings due to ground accelerations are obtained for two conditions:fixed-based(FB) and structure-soil-structure interaction(SSSI).The results indicate that pounding worsens the buildings’ condition because their seismic responses are amplified after pounding.Moreover,the underlying soil negatively impacts the buildings’ seismic responses during pounding because the ratio of their seismic response under SSSI conditions with pounding to those without pounding is greater than that of the FB condition.  相似文献   

6.
The response of adjacent buildings in city blocks to several strong earthquakes is analysed, taking into account the mutual collisions, or pounding, resulting from insufficient or non-existing separation distances. The buildings are idealized as lumped-mass, shear beam type, multi-degree-of-freedom (MDOF) systems with bilinear force-deformation characteristics and with bases supported on translational and rocking spring-dashpots. Collisions between adjacent masses can occur at any level and are simulated by means of viscoelastic impact elements. Using five real earthquake motions the effects of the following factors are investigated: building configuration and relative size, seismic separation distance and impact element properties. It is found that pounding can cause high overstresses, mainly when the colliding buildings have significantly different heights, periods or masses. This suggests a possibility for introducing a set of conditions into the codes, combined with some special measures, as an alternative to the seismic separation requirement.  相似文献   

7.
地震引起的相邻建筑物间的碰撞过去多次强烈地震中出现,并造成了较为严重的结构破坏。为研究此问题,设计建造了两座缩尺钢质模型来模拟香港两座相邻的21层建筑,对其进行了一系列振动台碰撞试验,试验结果表明复杂结构间的碰撞可能是周期性的、群周期性的或混沌的,这主要取决于间距、结构参数以及地震动参数。碰撞引起的能量传递可能对较柔较轻的邻近建筑造成较严重的地震反应和破坏。  相似文献   

8.
Unseating of bridge girders/decks during earthquakes is very harmful to the safety and serviceability of bridges. Evidence from recent severe earthquakes indicates that in addition to damage along longitudinal direction, lateral displacement and rotation of bridge girders caused by pounding to adjacent girders can also lead to unseating. To simulate this effect, 3D modelling of the dynamic performance of whole bridge structures, including pounding, is needed strongly. This paper presents a 3D model that is practically suitable to precisely analyse pounding between bridge girders. Experiments have been conducted to verify the proposed pounding model. The 3D non‐linear modelling of steel elevated bridges is also discussed. A general‐purpose dynamic analysis program for bridges, namely dynamic analysis of bridge systems (DABS) has been developed. Seismic analyses on a chosen three‐span steel bridge are conducted for several cases including pounding as a case study. The applicability of the proposed pounding model is illustrated by the computations. The effects of poundings on the response of bridge girders are discussed and the computation results are given. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

9.
The reports after major earthquakes indicate that the earthquake-induced pounding between insufficiently separated buildings may lead to significant damage or even total collapse of structures. An intensive study has recently been carried out on mitigation of pounding hazards so as to minimize the structural damages or prevent collisions at all. The aim of this paper is to investigate the effectiveness of the method when two adjacent three-storey buildings with different (substantially different) dynamic properties are connected at each storey level by link elements (springs, dashpots or viscoelastic elements). The results of the study indicate that connecting the structures by additional link elements can be very beneficial for the lighter and more flexible building. The largest decrease in the response of the structure has been obtained for links with large stiffness or damping values, which stands for the case when two buildings are fully connected and vibrate in-phase. Moreover, by comparing the effectiveness of different types of link elements, it has been confirmed that the use of viscoelastic elements reduces the peak displacement of the structure at lower stiffness and damping values comparing to the case when spring and dashpot elements are applied alone. On the other hand, the results of the study demonstrate that applying the additional link elements does not really change the response of the heavier and stiffer building. The final conclusion of the study indicates that linking two buildings allows us to reduce the in-between gap size substantially while structural pounding can be still prevented.  相似文献   

10.
Past severe earthquakes indicate that structural pounding may cause considerable damage or even lead to collapse of colliding structures if the separation distance between them is not sufficient. Because of its complexity, modelling of impact is an extremely difficult task, however, the precise numerical model of pounding is essential if an accurate structural response is to be simulated. The aim of this paper is to analyse a non‐linear viscoelastic model of collisions which allows more precise simulation of the structural pounding during earthquakes. The effectiveness of the model is verified by comparing the results of numerical analyses with the results of experiments conducted on pounding between different types of structures. The results of the study indicate that, compared to other models, the proposed non‐linear viscoelastic model is the most precise one in simulating the pounding‐involved structural response. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

11.
In cities and urban areas, building structures located at close proximities inevitably interact under dynamic loading by direct pounding and indirectly through the underlying soil. Majority of the previous adjacent building pounding studies that have taken the structure–soil–structure interaction (SSSI) problem into account have used simple lumped mass–spring–dashpot models under plane strain conditions. In this research, the problem of SSSI‐included pounding problem of two adjacent symmetric in plan buildings resting on a soft soil profile excited by uniaxial earthquake loadings is investigated. To this end, a series of SSSI models considering one‐directional nonlinear impact elements between adjacent co‐planar stories and using a method for direct finite element modeling of 3D inelastic underlying soil volume has been developed to accurately study the problem. An advanced inelastic structural behavior parameter, the seismic damage index, has been considered in this study as the key nonlinear structural response of adjacent buildings. Based on the results of SSSI and fixed base case analyses presented herein, two main problems are investigated, namely, the minimum building separation distance for pounding prevention and seismic pounding effects on structural damage in adjacent buildings. The final results show that at least three times, the International Building Code 2009 minimum distance for building separation recommended value is required as a clear distance for adjacent symmetric buildings to prevent the occurrence of seismic pounding. At the International Building Code‐recommended distance, adjacent buildings experienced severe seismic pounding and therefore significant variations in storey shear forces and damage indices. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

12.
During strong earthquakes, structural poundings may occur between adjacent buildings because of the limited separation distance and the deformations of their stories. A potential mitigation measure for this problem is the incorporation of layers of soft material, such as rubber, which can act as collision bumpers, in order to prevent the sudden impact pulses. In an effort to investigate the effectiveness of such an impact mitigation measure, relevant numerical simulations and parametric studies can be performed. However, none of the known impact models, which are available in the literature, is able to represent the usage of rubber bumpers with sufficient accuracy. The current study presents a simple but efficient methodology that can be used to simulate the incorporation of rubber layers between neighboring structures with relatively narrow seismic gaps. Such methodology will enable us to numerically investigate the effectiveness of using rubber bumpers to mitigate potential earthquake‐induced pounding. In particular, a new nonlinear inelastic force‐based impact model, able to appropriately describe the behavior of rubber under impact loading, taking also into account the limited thickness of the bumper, is introduced. Finally, a numerical example of simulating earthquake‐induced pounding between two multistory buildings with the consideration of rubber bumpers at impact locations is presented. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

13.
The present paper investigates the coupled effect of the supporting soil flexibility and pounding between neighbouring, insufficiently separated equal height buildings under earthquake excitation. Two adjacent three-storey structures, modelled as inelastic lumped mass systems with different structural characteristics, have been considered in the study. The models have been excited using a suit of ground motions with different peak ground accelerations and recorded at different soil types. A nonlinear viscoelastic pounding force model has been employed in order to effectively capture impact forces during collisions. Spring-dashpot elements have been incorporated to simulate the horizontal and rotational movements of the supporting soil. The results of the numerical simulations, in the form of the structural nonlinear responses as well as the time-histories of energy dissipated during pounding-involved vibrations, are presented in the paper. In addition, the variation in storeys peak responses and peak dissipated energies for different gap sizes are also shown and comparisons are made with the results obtained for colliding buildings with fixed-base supports. Observations regarding the incorporation of the soil-structure interaction and its effect on the responses obtained are discussed. The results of the study indicate that the soil-structure interaction significantly influences the pounding-involved responses of equal height buildings during earthquakes, especially the response of the lighter and more flexible structure. It has been found that the soil flexibility decreases storey peak displacements, peak impact forces and peak energies dissipated during vibrations, whereas it usually leads to the increases in the peak accelerations at each storey level.  相似文献   

14.
Base isolation can effectively reduce the seismic forces on a superstructure,particularly in low-to medium-rise buildings.However,under strong near-fault ground motions,pounding may occur at the isolation level between the baseisolated building(BIB)and its surrounding retaining walls.To effectively investigate the behavior of the BIB pounding with adjacent structures,after assessing some commonly used impact models,a modified Kelvin impact model is proposed in this paper.Relevant parameters in the modifi...  相似文献   

15.
Building pounding damages observed in the February 2011 Christchurch earthquake are described in this paper. The extent and severity of pounding damage is presented based on a street survey of Christchurch's central business district. Six damage severity levels and two confidence levels are defined to classify the observed damage. Generally, pounding was observed to be a secondary effect. However, over 6% of the total surveyed buildings were observed to have significant or greater pounding damage. Examples of typical and exceptional pounding damage are identified and discussed. Extensive pounding damage was observed in low‐rise unreinforced masonry buildings that were constructed with no building separation. Modern buildings were also endangered by pounding when building separations were infilled with solid architectural flashings. The damage caused by these flashings was readily preventable. The observed pounding damage is compared to that observed in the September 2010 Darfield earthquake to explore if the damage could have been predicted. It is found that pounding prone buildings can be identified with reasonable accuracy by comparing configurations to characteristics previously noted by researchers. However, detailed pounding damage patterns cannot currently be precisely predicted by these methods. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
In this study the seismic pounding response of adjacent multi-degree-of-freedom(MDOF) buildings with bilinear inter-story resistance characteristics is investigated through dimensional analysis. The application of dimensional analysis leads to a condensed presentation of the response, and the remarkable self-similarity property for bilinear MDOF buildings with inelastic collision is uncovered. It is shown that when the response is expressed in the appropriate dimensionless form, response spectra for any intensity of the excitation collapse to a single master curve. The reduced Π set explicitly describes the interaction between the colliding structures. The effect of pounding on the MDOF building's response is illustrated using three well-divided spectral regions(amplifi ed, de-amplifi ed and unaffected regions). Parametric studies are conducted to investigate the effects of the story stiffness of structures, the story stiffness ratio and mass ratio of adjacent buildings, the structural inelastic characteristics and the gap size values. Results show that(i) the infl uence of system stiffness ratio to the lighter and more fl exible building is more signifi cant in the fi rst spectral region, where the maximum response of the building is amplifi ed because of pounding; and(ii) the velocity and pounding force of the heavier and stiffer building is unexpectedly sensitive to the mass ratio of adjacent buildings.  相似文献   

17.
An effective solution method for studying the pounding response of two or more adjacent buildings during earthquakes is presented. The method is based on the Lagrange multiplier approach by which the geometric compatibility conditions due to contact are enforced. The energy and momentum balance criteria for the contacting bodies are satisfied according to the laws of impact with proper post-impact conditions, which can also take into account local energy absorption phenomena during impact. A solution scheme is proposed which can be incorporated easily into existing computer programs for static and dynamic analysis of structures. The applicability of the algorithm is illustrated in a number of selected sample problems and the correlation of numerical results to analytical solutions, whenever possible, is very satisfactory.  相似文献   

18.
Pounding between adjacent structures during earthquakes may significantly modify their response in terms of forces and displacements. In addition, it has a considerable influence on acceleration and thus on floor response spectra. Therefore, pounding may be unfavorable to the response of equipment. Despite extensive research in this field, the effects of pounding on structures are difficult to quantify accurately. This article presents results of shake table tests carried out on two representative scale adjacent structures subject to pounding. Besides investigating the effects of the gap between structures and the excitation signal, this study examines also the effect of tying the two structures together by means of rigid links to suppress pounding. The results of the experimental campaign are then compared with those of numerical simulations. Analyses and experimental results show good agreement regarding both impact forces and interstorey drifts.  相似文献   

19.
The effect of different structures configurations on the collision between adjacent planar RC building frames subjected to strong earthquakes is examined in this paper. Two 5‐storey and two 8‐storey frames, regular or with setbacks, are combined together to produce nine different pairs of adjacent RC structures. These pairs of buildings are subjected to six strong ground motions that are absolutely compatible with the design process. Various parameters are investigated such as maximum displacements, permanent displacements, members' ductility and internal forces and interstorey drift ratios. It is concluded that the effect of collision of adjacent frames seems to be unfavourable for most of the cases and, therefore, the structural pounding phenomenon is rather detrimental than beneficial. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

20.
The need to investigate the level of seismic pounding risk of buildings is apparent in future building code calibrations. In order to provide further insight into the pounding risk of adjacent buildings, this study develops a numerical simulation approach to estimate the seismic pounding risk of adjacent buildings separated by a minimum code‐specified separation distance during a certain period of time. It has been demonstrated that the period ratio of adjacent buildings is an important parameter that affects the pounding risk of adjacent buildings. However, there is no specific consideration for the period ratio in the related seismic pounding provisions of the 1997 Uniform Building Code. Results also reveal that, for two adjacent buildings, the probability distribution of required distance to avoid seismic pounding fits very well with the type I extreme value distribution. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号