共查询到20条相似文献，搜索用时 31 毫秒
1.
由于多种海水运动同时存在以及地形的影响,海水层结构非常复杂,解释海水层地震相,分析海水运动过程是地震海洋学研究的新方向.本文提出结合流体动力学数值模拟与反射地震正演分析海水层地震相的方法.首先,对地形和流体建模,得到特定条件下流体运动状态;然后用反射地震正演将模拟获得的海水层温盐剖面转换为反射地震数据;进一步和实际测量得到的地震海洋学剖面进行对比,分析地形、海水运动对海水层地震相的影响.以内孤立波浅化过程为例,通过流体动力学数值模拟,获得其浅化过程中出现的下沉型、分裂、转换型三个阶段的海水层剖面;对温盐剖面进行反射地震正演,分析浅化不同阶段海水层反射几何形态、反射结构等特征.这种新方法有望解释复杂地震海洋学图像,深化海底地形对海水运动影响的认识. 相似文献
2.
全国尺度的城市建筑地震风险评估对城市防震减灾工作有着重要意义。本文根据全国人口普查和城市统计年鉴等给出的宏观指标建立城市建筑数据库,通过GEAR1方法(Global earthquake activity rate model 1)和第五代中国地震动参数区划图给出具体场地的地面运动强度,通过地面坡度与剪切波速的对应关系确定的场地类别来考虑地震动输入,采用城市抗震弹塑性分析方法建立建筑分析模型,通过地震经济损失风险指标和建筑严重破坏和倒塌风险作为风险评价指标,给出中国大陆主要城市建筑地震风险分布图。结果分析表明,本文方法可以基于可公开获取的数据预测全国不同城市的建筑震害风险;根据第五代地震动参数区划图给出的地面强度,地震经济损失高风险区主要是设防加速度0.3g以上地区;考虑城市人口、GDP因素后,中、东部城市因人口和财富密度较高,建筑地震风险增加明显;不同地震动选波对经济损失风险影响较小,而对倒塌风险影响较大。本文分析方法可以为城市建筑地震风险分析提供相关参考。 相似文献
3.
基于非平稳信号时频分析及其地震时频属性技术应用的有关研究成果,对地震信号时频分析、分频解释与频谱分解及其在地震沉积学与地震储层成像中的应用进行系统总结与阐述.从时频分析的基本原理出发,探讨地震分频解释和频谱分解的实现方法及其在地震沉积学与储层成像中的应用策略与效果.分析指出,发展高精度时频分析理论和算法,一体化统筹谋划地震资料叠前与叠后处理解释,针对不同地质条件探索相应的时频响应规律等,是分频解释技术及其在地震沉积学和地震储层成像研究中有效应用中值得深入研究的问题. 相似文献
4.
M. M. ROKSANDI&#x; 《Geophysical Prospecting》1978,26(2):383-398
Seismic facies analysis makes use of different seismic parameters in order to get other than structural information. A review is given of possibilities and usefulness of seismic facies analysis in oil exploration. A seismic facies unit can be defined as a sedimentary unit which is different from adjacent units in its seismic characteristics. Parameters that should be taken into consideration in the seismic facies analysis are as follows: reflection amplitude, dominant reflection frequency, reflection polarity, interval velocity, reflection continuity, reflection configuration, abundance of reflections, geometry of seismic facies unit, and relationship with other units. Interpretation of seismic facies data may be either direct or indirect. The purpose of the direct interpretation is to find out geological causes responsible for the seismic signature of a seismic facies unit. So, the direct interpretation may be aimed at predicting lithology, fluid content, porosity, relative age, overpressured shales, type of stratification, geometry of the geological body corresponding to the seismic facies unit and its geological setting. The indirect interpretation is intended to reach some conclusions on depositional processes and environments, sediment transport direction, and some aspects of geological evolution (transgression, regression, subsidence, uplift, erosion). The results of the seismic facies analysis may be shown on seismic facies cross-sections and seismic facies maps. Depending on the available seismic data and geological conditions in the area under consideration, the seismic facies maps may be of different types such as general seismic facies maps showing distribution of different seismic facies units, sand-shale ratio maps, direction of cross-bedding and paleo-transport maps etc. Several kinds of seismic facies units and their geological interpretation are discussed as examples of seismic facies analysis. 相似文献
5.
本文研究地震映像数据的时频解释方法.采用短时傅立叶变换方法获得地震映像记录频谱的时间与空间分布,根据介质对地震波频谱影响的基本规律,通过分析已知地质断面地震映像记录频谱的时间与空间分布,研究了综合利用频率域和时间域信息进行地震映像数据解释的效果.时频分析方法提取了地震波的频谱中关于地层岩性、构造方面的信息,为地震映像数据的处理和解释提供了更多的参考信息.实例证明,利用时频分析解释地震映像数据,有助于了解覆盖层下岩性变化、薄层的分布范围、探测隐伏土洞、确定混凝土构件中缺陷位置,提高地震映像数据的解释精度和准确性. 相似文献
6.
7.
虽然煤田三维地震勘探已经过了十多年的发展,但构造解释问题仍是目前需要解决的主要问题之一.随着三维地震资料解释方法的不断发展,小波分析技术、相干体技术、地震属性技术、图像处理等提高解释精度的方法相继在地震勘探领域中得到应用.另一方面,由于煤矿采区三维地震勘探资料一般具有高信噪比和高分辨率的特点,为做好三维地震资料精细构造解释提供了物质基础.本文结合小波分析技术、相干体技术、地震属性技术等多种方法,结合两个采区的实例,对小断层和小规模陷落柱做了精细构造解释.解释结果显示联合使用以上几种解释技术,能提高三维地震资料的构造解释精度和可靠信. 相似文献
8.
Modern earthquake loss models make use of earthquake catalogs relevant to the seismic hazard assessment upon seismicity and seismotectonic analysis. The main objective of this paper is to investigate a recently compiled catalog (National Institute of Meteorology or INM catalog: 412-2011) and to generate seismic hazard maps through classical probabilistic seismic hazard assessment (PSHA) and smoothed-gridded seismicity models for Tunisia. It is now established with the local earthquake bulletin that the recent seismicity of Tunisia is sparse and moderate. Therefore, efforts must be undertaken to elaborate a robust hazard analysis for risk assessment and seismic design purposes. These recommendations follow the recently published reports by the World Bank that describe the seismic risk in Tunis City as being beyond a tolerable level with an MSK intensity level of VII. Some attempts were made during the past two decades to assess the seismic hazard for Tunisia and they have mostly failed to properly investigate the historical and instrumental seismicity catalog. This limitation also exists for the key aspect of epistemic and random uncertainties impact on the final seismic hazard assessment. This study also investigates new ground motion prediction equations suitable for use in Tunisia. The methodology applied herein uses, for the first time in PSHA of Tunisia, seismicity parameters integrated in logic tree framework to capture epistemic uncertainties through three different seismic source models. It also makes use of the recently released version of OpenQuake engine; an open-source tool for seismic hazard and risk assessment developed in the framework of the Global Earthquake Model. 相似文献
9.
复地震道分析又称三瞬分析,该分析方法可将反映地震信号局部变化情况的地震波的瞬时振幅、瞬时相位和瞬时频率等信息分离开.本文应用Hilbert变换求解虚地震记录,用复地震道分析方法求取"三瞬"信息,并用该方法计算了理论合成地震记录的瞬时振幅、瞬时相位和瞬时频率,获得了较好的效果.同时,本文也利用该方法对某区块实际地震资料进行了处理,结果表明,复地震道分析方法获得的"三瞬"信息可反映地震信号的局部变化,有助于进行地震薄互层分析,并能提高数据的解释精度. 相似文献
10.
Fault and fracture interpretation is a fundamental but essential tool for subsurface structure mapping and modelling from 3D seismic data. The existing methods for semi-automatic/automatic fault picking are primarily based on seismic discontinuity analysis that evaluates the lateral changes in seismic waveform and/or amplitude, which is limited by its low resolution on subtle faults and fractures without apparent vertical displacements in seismic images. This study presents an innovative workflow for computer-aided fault/fracture interpretation based on seismic geometry analysis. First, the seismic curvature and flexure attributes are estimated for highlighting both the major faults and the subtle fractures in a seismic volume. Then, fault probability is estimated from the curvature and flexure volumes for differentiation between the potential faults and non-faulting features in the geometric attributes. Finally, the seeded fault picking is implemented for interpreting the target faults and fractures guided by the knowledge of interpreters to avoid misinterpretation and artefacts in the presence of faulting complexities as well as coherent seismic noises. Applications to two 3D seismic volumes from the Netherlands North Sea and the offshore New Zealand demonstrate the added values of the proposed method in imaging and picking the subtle faults and fractures that are often overlooked in the conventional seismic discontinuity analysis and the following fault-interpretation procedures. 相似文献
11.
12.
Mariusz Majdański Maciej Trzeciak Edward Gaczyński Andrzej Maksym 《Studia Geophysica et Geodaetica》2016,60(3):565-582
The travel time inversion of wide-angle seismic data is a technique commonly used in the deep seismic sounding. We propose an application of this technique to a smaller scale of a sedimentary layer, where the characteristics of seismic observations changes significantly. Field observations confirmed by synthetic analysis recognize the dominant amplitudes of wide-angle post-critical reflections. A case study is presented in this paper, of a joint interpretation of conventional reflection seismic with reflection imaging, combined with the wide-angle travel time inversion of additional full-spread observations. A joint interpretation results in a precise recognition of the seismic velocity distribution, that is further used for the seismic depth conversion with the uncertainty analysis of the depth of the reflecting horizons. Despite the salt layer in the studied structure this method is able to precisely recognize the seismic velocities of the sub-salt structures. 相似文献
13.
N. V. Sharov 《Izvestiya Physics of the Solid Earth》2013,49(1):34-49
On the basis of analysis and generalization of the extensive seismic information obtained over the last forty years, the modern concept of the deep crustal structure in the central Karelian Craton is developed. The tomographic models are reconstructed, the stratification of the Earth’s crust and geometry of seismic boundaries are refined, and the subsidence of the boundary between the crust and mantle down to a depth of 60 km is noted. The comparison and integrated interpretation of the sections studied by the common depth point (CDP), deep seismic sounding (DSS), and converted-wave methods together with the available geological data shows that the results derived by different seismic methods differ markedly. However, since various methods have revealed the different characteristics of the medium, the entire body of seismic evidence can be used for geological interpretation. 相似文献
14.
用算法复杂性分析时间序列 总被引：11，自引：1，他引：11
本文介绍了算法复杂性的概念,总结了算法复杂性的一些性质,对其所具有的优点及在计算中所存在的问题进行了讨论。通过用算法复杂性C(n)分析由地震细胞自动机模型产生的地震时间序列,说明算法复杂性用于研究地震活动演化及地震活动图象是有希望的。 相似文献
15.
Recent advances in seismic reflection amplitude analysis (e.g., amplitude versus offset-AVO, bright spot mapping) technology to directly detect the presence of subsurface DNAPL (e.g., CCl4) were applied to 216-Z-9 crib, 200 West Area, DOE Hanford Site, Washington. Modeling to determine what type of anomaly might be present was performed. Model results were incorporated in the interpretation of the seismic data to determine the location of any seismic amplitude anomalies associated with the presence of high concentrations of CCl4. Seismic reflection profiles were collected and analyzed for the presence of DNAPL. Structure contour maps of the contact between the Hanford fine unit and the Plio/Pleistocene unit and between the Plio/Pleistocene unit and the caliche layer were interpreted to determine potential DNAPL flow direction. Models indicate that the contact between the Plio/Pleistocene unit and the caliche should have a positive reflection coefficient. When high concentrations of CCl4 are present, the reflection coefficient of this interface displays a noticeable positive increase in the seismic amplitude (i.e., bright spot). Amplitude data contoured on the Plio/Pleistocene-caliche boundary display high values indicating the presence of DNAPL to the north and east of the crib area. The seismic data agree well with the well control in areas of high concentrations of CCl4. 相似文献
16.
在油田的开发部署研究中,三维地震解释技术的应用研究是必不可少的内容.辽河油田复杂的地质条件以及油田规模应用水平井决定了只有应用地震这样密集的信息资料,才有可能较为准确地刻画地下地质体,落实微构造、小断层;在地震反演结果不能准确预测薄储层的横向变化的情况下,才有可能实现薄储层预测,进行储层追踪,指导水平井钻井.利用地震解释技术进行薄储层预测和小断层识别的实例充分展现了精细地震解释技术的价值.随着地震解释技术,尤其是四维地震的不断发展,其在油田开发中的应用日益广泛.将地震与地质、测井、开发等结合起来,形成综合研究技术才是油田开发所需技术的发展趋势. 相似文献
17.
地震信号属于非线性和非平稳信号,传统的分析方法主要包括短时傅立叶变换、小波变换和Cohen类时频分布等等;希尔伯特-黄变换是分析非平稳信号的新方法,该方法的关键部分是信号的经验模态分解,通过经验模态分解,复杂的信号可以分解为有限的数量很少的几个固有模态函数,从而可以得到信号的希尔伯特时频谱;将该方法应用于单个的地震道数据,可以对地震道进行经验模态分解并得到希尔伯特谱,应用于地震剖面,可以得到意义更加明确的瞬时频率和瞬时振幅等地震属性,模型试算和实际应用表明了该方法的有效性. 相似文献
18.
The idea of curvature analysis has been widely used in subsurface structure interpretation from three-dimensional seismic data (e.g., fault/fracture detection and geomorphology delineation) by measuring the lateral changes in the geometry of seismic events. However, such geometric curvature utilizes only the kinematic information (two-way traveltime) of the available seismic signals. While analysing the dynamic information (waveform), the traditional approaches (e.g., complex trace analysis) are often trace-wise and thereby fail to take into account the seismic reflector continuity and deviate from the true direction of geologic deposition, especially for steeply dipping formations. This study proposes extending the three-dimensional curvature analysis to the waveforms in a seismic profile, here denoted as the waveform curvature, and investigates the associated implications for assisting seismic interpretation. Applications to the F3 seismic dataset over the Netherlands North Sea demonstrate the added values of the proposed waveform curvature analysis in four aspects. First, the capability of the curvature operator in differentiating convex and concave bending allows automatic decomposition of a seismic image by the reflector types (peaks, troughs and zero crossings), which can greatly facilitate computer-aided horizon interpretation and modelling from three-dimensional seismic data. Second, the signed minimum curvature offers a new analytical approach for estimating the fundamental and important reflector dip attribute by searching the orientation associated with least waveform variation. Third, the signed maximum curvature makes it possible to analyse the seismic signals along the normal direction of the reflection events. Finally, the curvature analysis promotes the frequency bands of the seismic signals and thereby enhances the apparent resolution on identifying and interpreting subtle seismic features. 相似文献
19.
房屋抗震能力调查对于全面摸清地震灾害风险底数,预测地震灾害损失具有十分重要的意义。传统实地调查方法难以大范围开展,而依靠经验估计和人工解译的遥感房屋抗震能力评价的效率仍有待提高。针对此问题,文章以深度学习遥感目标识别算法为基础,提出了多尺度聚合的房屋自动提取方法,并将该方法应用于湖北省房屋抗震能力遥感初判,自动提取房屋建筑共计1 060万余栋,并对其抗震能力进行了分类判别。经与试点县实地调查结果对比,文章方法房屋提取误差总体在10%以内,房屋抗震能力判别准确度在72.3%～90.9%之间。实验结果表明文章方法可为全国自然灾害风险普查工程房屋调查工作提供技术支持。 相似文献
20.
本文应用层析成像反演方法优化叠前深度偏移速度模型。阐述叠前深度偏移速度建模流程,详细介绍利用两种不同层析反演方法来优化深度域的层速度模型,对同一实际地震资料速度模型建立的应用效果表明,在资料信噪比较高的地区能提供准确解释层位信息的前提下,模型层析反演优化后的速度模型精度要比网格层析反演优化后的速度模型更高,且稳定性强。 相似文献