共查询到20条相似文献，搜索用时 625 毫秒
1.
Calcite veins are invariably associated with en-echelon kimberlite dyke–fracture arrays. A detailed microstructural study of veining indicates four vein types. Type I stretched or ataxial veins are defined by high aspect ratio calcite fibers that are crystallographically continuous with calcite of the kimberlite matrix wall rock, by elongated phenocrystic phlogopite with sharp crystal terminations centered on contacts between adjacent calcite fibers and by phenocrystic phlogopite that grows or extends across these veins. Type I vein mineralogy indicates syn-dilational crystallization of vein minerals in local tensional areas within the kimberlite. Vein Types II (stretched to syntaxial elongate-blocky) and III (antitaxial) indicate late crystallization vein mineral growth during subsequent or repeated dilation. Calcite fibers in Type I to Type III veins are orthogonal to the contacts of their host dykes regardless of the orientation of vein margins. Type IV calcite veins, with blocky or mosaic/polycrystalline textures, are attributed to minor post-intrusion extension, which was potentially accompanied by repeated kimberlite intrusion within a given dyke array. Syn-crystallization/syn-intrusion Type I veins and an ubiquitous dyke-parallel fracture cleavage, in a zone up to 4 m on either side of dyke contacts, suggest that en-echelon kimberlite dyke–fracture arrays occupied the approximate center of zones of active dilation within the brittle carapace of the upper crust. Type II and III veins indicate that extension or dilation continued, independently of an occupying kimberlite fluid phase, after initial intrusion. Arrested mobile hydrofracturing, under low differential stress within the upper brittle or seismic carapace of the continental crust, followed by repeated dilation of the dyke–fracture system, is proposed as a mechanism for producing the features observed in this study. The conditions constrained in this study indicate passive dyke intrusion into dilating fracture arrays during crustal extension. 相似文献
2.
The Huai Kham On gold deposit is located in the central part of the Sukhothai Fold Belt, northern Thailand. The Sukhothai Fold Belt represents an accretionary complex formed by subduction and collision between the Indochina and Sibumasu Terranes. There are many small gold deposits in the Sukhothai Fold Belt; however, the styles and formation environments of those gold deposits are not clear. The geology of the Huai Kham On deposit consists of volcanic and volcanosedimentary rocks, limestone, and low‐grade metamorphic rocks of Carboniferous to Triassic age. Gold‐bearing quartz veins are hosted by volcanic and volcanosedimentary rocks. The quartz veins can be divided into four stages. The mineral assemblage of the gold‐bearing quartz veins of Stages I and II comprises quartz, calcite, illite, pyrite, native gold, galena, chalcopyrite, and sphalerite. Quartz veins of Stage III consist of microcrystalline quartz, dolomite, calcite, pyrite, native gold, and chalcopyrite. Veins of Stage IV consist of calcite, dolomite, chlorite, and quartz. Fluid inclusions in quartz veins are classified into liquid‐rich two‐phase (Types IA and IB), carbonic‐aqueous (Type II), and carbonic (Type III) fluid inclusions. The homogenization temperatures of Types IA and II fluid inclusions that are related to the gold‐bearing quartz veins from Stages I to III ranged from 240° to 280°C. The δ18O values of quartz veins of Stages I to III range from +12.9 to +13.4‰, suggesting the presence of a homogeneous hydrothermal solution without temperature variation such as a decrease of temperature during the formation of gold‐bearing quartz veins from Stages I to III in the Huai Kham On gold deposit. Based on the calculated formation temperature of 280°C, the δ18O values of the hydrothermal solution that formed the gold‐bearing quartz veins range from +3.2 to +3.7‰, which falls into the range of metamorphic waters. The gold‐bearing quartz veins of the Huai Kham On deposit are interpreted to be the products of metamorphic water. 相似文献
3.
The Youjiang basin, which flanks the southwest edge of the Yangtze craton in South China, contains many Carlin-type gold deposits and abundant paleo-oil reservoirs. The gold deposits and paleo-oil reservoirs are restricted to the same tectonic units, commonly at the basinal margins and within the intrabasinal isolated platforms and/or bioherms. The gold deposits are hosted by Permian to Triassic carbonate and siliciclastic rocks that typically contain high contents of organic carbon. Paragenetic relationships indicate that most of the deposits exhibit an early stage of barren quartz ± pyrite (stage I), a main stage of auriferous quartz + arsenian pyrite + arsenopyrite + marcasite (stage II), and a late stage of quartz + calcite + realgar ± orpiment ± native arsenic ± stibnite ± cinnabar ± dolomite (stage III). Bitumen in the gold deposits is commonly present as a migrated hydrocarbon product in mineralized host rocks, particularly close to high grade ores, but is absent in barren sedimentary rocks. Bitumen dispersed in the mineralized rocks is closely associated and/or intergrown with the main stage jasperoidal quartz, arsenian pyrite, and arsenopyrite. Bitumen occurring in hydrothermal veins and veinlets is paragenetically associated with stages II and III mineral assemblages. These observations suggest an intimate relationship between bitumen precipitation and gold mineralization. In the paleo-petroleum reservoirs that typically occur in Permian reef limestones, bitumen is most commonly observed in open spaces, either alone or associated with calcite. Where bitumen occurs with calcite, it is typically concentrated along pore/vein centers as well as along the wall of pores and fractures, indicating approximately coeval precipitation. In the gold deposits, aqueous fluid inclusions are dominant in the early stage barren quartz veins (stage I), with a homogenization temperature range typically of 230°C to 270°C and a salinity range of 2.6 to 7.2 wt% NaCl eq. Fluid inclusions in the main and late-stage quartz and calcite are dominated by aqueous inclusions as well as hydrocarbon- and CO2-rich inclusions. The presence of abundant hydrocarbon fluid inclusions in the gold deposits provides evidence that at least during main periods of the hydrothermal activity responsible for gold mineralization, the ore fluids consisted of an aqueous solution and an immiscible hydrocarbon phase. Aqueous inclusions in the main stage quartz associated with gold mineralization (stage II) typically have a homogenization temperature range of 200–230°C and a modal salinity around 5.3 wt% NaCl eq. Homogenization temperatures and salinities of aqueous inclusions in the late-stage drusy quartz and calcite (stage III) typically range from 120°C to 160°C and from 2.0 to 5.6 wt% NaCl eq., respectively. In the paleo-oil reservoirs, aqueous fluid inclusions with an average homogenization temperature of 80°C are dominant in early diagenetic calcite. Fluid inclusions in late diagenetic pore- and fissure-filling calcite associated with bitumen are dominated by liquid C2H6, vapor CH4, CH4–H2O, and aqueous inclusions, with a typical homogenization temperature range of 90°C to 180°C and a salinity range of 2–8 wt% NaCl eq. It is suggested that the hydrocarbons may have been trapped at relatively low temperatures, while the formation of gold deposits could have occurred under a wider and higher range of temperatures. The timing of gold mineralization in the Youjiang basin is still in dispute and a wide range of ages has been reported for individual deposits. Among the limited isotopic data, the Rb–Sr date of 206 ± 12 Ma for Au-bearing hydrothermal sericite at Jinya as well as the Re–Os date of 193 ± 13 Ma on auriferous arsenian pyrite and 40Ar/39Ar date of 194.6 ± 2 Ma on vein-filling sericite at Lannigou may provide the most reliable age constraints on gold mineralization. This age range is comparable with the estimated petroleum charging age range of 238–185 Ma and the Sm–Nd date of 182 ± 21 Ma for the pore- and fissure-filling calcite associated with bitumen at the Shitouzhai paleo-oil reservoir, corresponding to the late Indosinian to early Yanshanian orogenies in South China. The close association of Carlin-type gold deposits and paleo-oil reservoirs, the paragenetic coexistence of bitumens with ore-stage minerals, the presence of abundant hydrocarbons in the ore fluids, and the temporal coincidence of gold mineralization and hydrocarbon accumulation all support a coeval model in which the gold originated, migrated, and precipitated along with the hydrocarbons in an immiscible, gold- and hydrocarbon-bearing, basinal fluid system. 相似文献
4.
《Chemie der Erde / Geochemistry》2023,83(1):125949
The Cu-Sb-Pb polymetallic vein deposit is hosted by metavolcanics rocks of the Gawuch Formation at the Kaldom Gol area of the northwest Kohistan arc terrain in northern Pakistan. The mineralization is closely associated with the dioritic to granodioritic rocks of the Lowari pluton, which was intruded into the Gawuch metavolcanics. Details of ore characterization and processes of ore genesis of this evidently hydrothermal mineralization are not well documented. Integrating petrographic, mineral-chemical and isotopic investigations, this study aims to comprehend the source of hydrothermal fluids, geochemical evolution, mineral inclusions and physicochemical conditions of the Cu-Sb-Pb polymetallic vein deposit in Gawuch metavolcanics in the Kohistan arc terrain in northern Pakistan. The mineralization is distinguished into three types of ore-gangue associations: Type Ia, Type Ib, and Type II. The textural study revealed two pyrite generations: (i) Py1 displaying euhedral to subhedral habits and containing scarce inclusions, and (ii) Py2 occurring as anhedral grains hosting abundant inclusions. Type Ia is characterized by Py1 associated with abundant quartz (Qz) showing comb texture, sericite (Ser), and minor chlorite (Chl). Type Ib comprises Qz + Ser + Chl and Py2, chalcopyrite (Ccp), and magnetite (Mag). Type II is represented by mosaic quartz, rhombic adularia, and bladed calcite, and the ore minerals fahlore and galena. Alteration zones composed of Qz-Ser ± Chl and Qz-Ser-Chl, surround Type I (a, b) and Type II veins, respectively. Fahlore and galena mostly replace pyrite of Type Ia and chalcopyrite of Type Ib. In addition, malachite, azurite, hematite and covellite occur as secondary (supergene) minerals. The Co/Ni ratios (>1) of Kaldom Gol pyrites suggest that the ore-forming fluids were hydrothermal in origin and Py1 and Py2 solidified at 221–304 °C and 225–261 °C, respectively. The LA-ICP-MS time-resolved depth profiles confirm the existence of sphalerite, and chalcopyrite inclusions in pyrite (Py1 and Py2) and millerite, bravoite, vaesite, Au-tellurides, native Au and galena inclusions in chalcopyrite and fahlore. Sulfur isotope compositions of pyrites (δ34S = Py1, −0.58 to +2 ‰; δ34S = Py2, −0.24 to +2.04 ‰) indicate that the ore-forming fluids were derived from magmatic source (s). The mineral assemblage, hydrothermal alterations, textures, temperature and δ34S of pyrites suggest that the Cu-Sb-Pb polymetallic mineralization at Kaldom Gol represents an intermediate-sulfidation type of epithermal deposit. 相似文献
5.
The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn–W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO2-bearing aqueous fluids represented by the NaCl–CaCl2–H2O–CO2 system with moderate salinity (mean=8.6 wt% NaClequivalent).Temperatures determined using oxygen isotope thermometry are 415–521°C (quartz–muscovite), 392–447°C (quartz–cassiterite), and 444–490°C (quartz–hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid–rock interaction occurred during mineralization. The O- and H-isotope data of quartz–muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO2 component of the fluid inclusions had similar δ
13C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ
18O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels. 相似文献
6.
C. Sivaprakash 《Contributions to Mineralogy and Petrology》1981,77(2):121-128
Mineral assemblages, rock and mineral chemistry, and mineral reactions, in calc-silicate rocks from Koduru area, Andhra Pradesh, India are discussed. Mineralogical and bulk chemical differences indicate 3 calc-silicate rock types — type I with K feldspar+calcite+wollastonite+quartz+scapolite+diopsidess +andraditess+sphene, has relatively high rock oxidation ratios. Type II is a highly calcic variety with high rock MgFe ratios, and has K feldspar+calcite+wollastonite+quartz+scapolite + diopsidess±grossularitess+sphene+zoisite. Type III has K feldspar +calcite+wollastonite+quartz+scapolite+diopsidess +sphene+hornblende+magnetite, and has relatively low oxidation ratio and low MgFe ratio. The 3 calc-silicate rock types have originated as mixtures of limestone/dolomite/marl.Diopside was produced by a reaction involving Ca-amphibole +calcite+quartz, and reversed during retrogression. Andraditess in type I rocks was produced at the expense of hedenbergitic component of pyroxene in a continuous reaction as a consequence of increase in the oxygen content of the original sediment relative to type III. Calcite+quartz reacted to give wollastonite. During cooling an influx of water caused scapolite to alter to zoisite. 相似文献
7.
Ore mineralization and wall rock alteration of Crater Mountain gold deposit, Papua New Guinea, were investigated using ore and host rock samples from drill holes for ore and alteration mineralogical study. The host rocks of the deposit are quartz‐feldspar porphyry, feldspar‐hornblende porphyry, andesitic volcanics and pyroclastics, and basaltic‐andesitic tuff. The main ore minerals are pyrite, sphalerite, galena, chalcopyrite and moderate amounts of tetrahedrite, tennantite, pyrrhotite, bornite and enargite. Small amounts of enargite, tetradymite, altaite, heyrovskyite, bismuthinite, bornite, idaite, cubanite, native gold, CuPbS2, an unidentified Bi‐Te‐S mineral and argentopyrite occur as inclusions mainly in pyrite veins and grains. Native gold occurs significantly in the As‐rich pyrite veins in volcanic units, and coexists with Bi‐Te‐S mineral species and rarely with chalcopyrite and cubanite relics. Four mineralization stages were recognized based on the observations of ore textures. Stage I is characterized by quartz‐sericite‐calcite alteration with trace pyrite and chalcopyrite in the monomict diatreme breccias; Stage II is defined by the crystallization of pyrite and by weak quartz‐chlorite‐sericite‐calcite alteration; Stage III is a major ore formation episode where sulfides deposited as disseminated grains and veins that host native gold, and is divided into three sub‐stages; Stage IV is characterized by predominant carbonitization. Gold mineralization occurred in the sub‐stages 2 and 3 in Stage III. The fS2 is considered to have decreased from ～10?2 to 10?14 atm with decreasing temperature of fluid. 相似文献
8.
Several precious metal-bearing, low sulfidation epithermal veins occur in the rolling topography of the Osilo area, northern
Sardinia. The Sa Pala de Sa Fae and the Sa Pedra Bianca veins were subject to intense diamond drilling exploration in the
mid 1990 s. The veins extend for 1–3 km, dip steeply, and range from 1 to 10 m in width. High K-calc-alkaline volcanic deposits
containing plagioclase phenocrysts (along with lesser pyroxene, amphibole, magnetite, olivine and sanidine) form the main
host rocks. Gold grades in drill intersections range from <0.1 to <20 ppm, with silver-gold ratios of around 4 to 7. Mineralogical
studies show a systematic distribution of three hydrothermal mineral assemblages. At distances >50 m from the vein, the assemblage
albite + Fe-chlorite + illite + pyrite (± montmorillonite ± calcite ± K-feldspar) prevails regionally, and its formation is
attributed to minor metasomatism of the country rock involving the addition of water, carbon dioxide and hydrogen sulfide.
At distances <10 m from the vein, the assemblage quartz + K-feldspar + pyrite ± illite dominates, forming an alteration envelope
that cross cuts regional alteration. Quartz and K-feldspar increase in abundance towards the vein. Quartz is the main vein
mineral, and it displays a range of morphologies and textures including crustiform colloform banding, quartz pseudomorphs
of platy calcite, breccias and coarse euhedral crystals. Electrum and argentite which are the main gold and silver minerals
deposited during the early stages of vein mineralization with rhomb-shaped crystals of K-feldspar (adularia). Pyrite, plus
lesser marcasite, arsenopyrite, stibnite and sphalerite, are the other sulfide phases in veins. Kaolinite ± halloysite ± jarosite
form a late assemblage overprinting earlier hydrothermal alteration. It is mostly restricted to shallow depths of a few meters,
except near veins. Most of this assemblage likely formed from weathering and oxidation of sulfides. Microthermometric measurements
were made on quartz-hosted, two-phase (liquid + vapor) inclusions, containing ∼75% liquid; mean homogenization temperatures
(∼750 measurements) range from 220 to 250 °C, and ice-melting temperatures (∼550 measurements) range from 0.0 to −2.3 °C.
The presence of co-existing vapor-rich and liquid rich inclusions, with quartz pseudomorphs of platy calcite, indicate that
boiling conditions existed. Slight vapor-bubble expansion of a few fluid inclusions subjected to crushing experiments indicates
inclusion fluids contained variable but low concentrations of dissolved gas. This study shows that gold-silver mineralization
formed in subvertical channels from ascending solutions at 250 °C at around 300 to 450 m below the paleo-water table in a
typical low-sulfidation epithermal environment. Hydrothermal solutions that produced vein mineralization and related alteration
were dilute (<4.1 equivalent wt.% NaCl and <4 wt.% CO2), near neutral pH, reduced and, at times, boiling.
Received: 19 May 1998 / Accepted: 8 March 1999 相似文献
9.
The Pan-African tectonothermal activities in areas near Sittampundi, south India, are characterized by metamorphic changes in an interlayered sequence of migmatitic metapelites, marble and calc-silicate rocks. This rock sequence underwent multiple episodes of folding, and was intruded by granite batholiths during and subsequent to these folding events. The marble and the calc-silicate rocks develop a variety of skarns, which on the basis of mineralogy; can be divided into the following types: Type I: wollastonite?+?clinopyroxene (mg#?=?71–73)?+?grandite (16–21 mol% Adr)?+?quartz?±?calcite, Type II: grandite (25–29 mol% Adr )?+?clinopyroxene (mg#?=?70)?+?calcite?+?quartz, and Type III: grandite (36–38 mol% Adr)?+?clinopyroxene (mg#?=?55–65)?+?epidote?+?scapolite?+?calcite?+?quartz. Type I skarn is 2–10 cm thick, and is dominated by wollastonite (>70 vol%) and commonly occurs as boudinaged layers parallel to the regional foliation Sn1 related to the Fn1 folds. Locally, thin discontinuous lenses and stringers of this skarn develop along the axial planes of Fn2 folds. The Type II skarn, on the other hand, is devoid of wollastonite, rich in grandite garnet (40–70 vol%) and developed preferentially at the interface of clinopyroxene-rich calc-silicates layers and host marble during the later folding event. Reaction textures and the phase compositional data suggest the following reactions in the skarns: 1. calcite?+?SiO2?→?wollastonite?+?V, 2. calcite?+?clinopyroxene?+?O2?→?grandite?+?SiO2?+?V, 3. scapolite?+?calcite?+?quartz?+?clinopyroxene?+?O2?→?grandite?+?V and 4. epidote?+?calcite?+?quartz?+?clinopyroxene?+?O2?→?grandite?+?V Textural relations and composition of phases demonstrate that (a) silica metasomatism of the host marble by infiltration of aqueous fluids (XCO2?<?0.15) led to production of large volumes of wollastonite in the wollastonite-rich skarn whereas mobility of FeO, SiO2 and CaO across the interface of marble and calc-silicate and infiltration of aqueous fluids (XCO2?<?0.35) were instrumental for the formation of grandite skarns. Composition of minerals in type II skarn indicates that Al2O3 was introduced in the host marble by the infiltrating fluid. Interpretation of mineral assemblages observed in the interlayered metapelites and the calcareous rocks in pseudosections, isothermal P-XCO2 and isobaric T-XCO2 diagrams tightly bracket the “peak” metamorphic conditions at c.9?±?1 kbar and 750°?±?30°C. Subsequent to ‘peak’ metamorphic conditions, the rocks were exhumed on a steeply decompressive P–T path. The estimated ‘peak’ P–T estimates are inconsistent with the “extreme” metamorphic conditions (>11 kbar and >950°C) inferred for the Pan-African tectonothermal events from the neighboring areas. Field and petrological attributes of these skarn rocks are consistent with the infiltration of aqueous fluid predominantly during the Fn1 folding event at or close to the ‘peak’ metamorphic conditions. Petrological features indicate that the buffering capacity of the rocks was lost during the formation of type I and II skarns. However, the host rock could buffer the composition of the permeated fluids during the formation of type III skarn. Aqueous fluids derived from prograde metamorphism of the metapelites seem to be the likely source for the metasomatic fluids that led to the formation of the skarn rocks. 相似文献
10.
Euis T. YUNINGSIH Hiroharu MATSUEDA Eko P. SETYARAHARJA Mega F. ROSANA 《Resource Geology》2012,62(2):140-158
The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t?1 gold and 41.5 g t?1 silver at a cut‐off of 4 g t?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization. 相似文献
11.
Ladda Tangwattananukul Daizo Ishiyama Osamu Matsubaya Toshio Mizuta Punya Charusiri Hinako Sato Koichiro Sera 《Resource Geology》2014,64(2):167-181
The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ18O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ18O value of quartz in Stage IV (+15.0‰). The increase in δ18O values of quartz at Stage IV is explained by boiling. PH2O is estimated to be 16 bars at 200°C. The fCO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface. 相似文献
12.
Graphite‐schist blocks in the Franciscan Mélange,San Simeon,California: Evidence of high‐P metamorphism 
下载免费PDF全文
下载免费PDF全文 The seacliff exposure at San Simeon, California, contains graphite‐schist blocks in a shale‐matrix, an undocumented lithology within the Franciscan mélange. Thirty graphite‐schist blocks were studied to discover all the varieties in this classic locality of mélange. Based on their mineralogical assemblage and composition, and textural characteristics the graphite‐schists in San Simeon are subdivided into two main types (Type I and II) with two subdivisions each (A and B). Type IA and IIA blocks are the most abundant. Type IA graphite‐schists are siltstone/fine greywacke‐like, preserve sedimentary textures, and lack lawsonite. Type IB graphite‐schists are mineralogical and texturally similar to Type IA schists, but are finer grained siltstone and shale. Type IIA graphite‐schists are compositionally layered and contain quartz‐ and albite‐rich layers and dark graphite‐ and intergrown mica/chlorite‐rich layers. Nine out of the 15 Type IIA blocks contain lawsonite. Two Type IIA blocks also contain aragonite (+calcite) in veins. Type IIB graphite‐schists are mostly composed of quartz and minor graphite, intergrown chlorite and white mica, and white mica pseudomorphs after lawsonite. The phengite content of mica in Type IIA blocks is higher than that of mica in Type IA graphite‐schists, confirming they were metamorphosed under high‐P/low‐T conditions. Type IA blocks were recrystallized between 200 and 250 °C at <~3 kbar; whereas, Type IIA blocks were metamorphosed under higher pressure conditions, probably at 250–300 °C and 3–5 kbar. Most likely both types of graphite‐schists were derived from a similar layered siltstone/fine greywacke/shale protolith. Organic matter‐rich sediments deposited in the trench axis were subducted along with oceanic crust during Franciscan subduction. Type I graphite‐schists were subducted to depths <10 km, whereas Type II graphite‐schists were subducted to depths ~15 km where they were underplated under high‐P conditions. The graphitic metasedimentary rocks were juxtaposed with mafic lithologies from the subducted oceanic crust that were metamorphosed to blueschist facies and retrograded to greenstone as they returned to the surface in the subduction channel shear zone. 相似文献
13.
Thomas T. Sorulen Ryohei Takahashi So Tanaka Kana Suzuki Akira Imai Yasushi Watanabe Shingo Kikuchi 《Resource Geology》2019,69(4):402-429
The Utanobori gold deposit is a low‐sulfidation, epithermal vein‐type deposit located in northern Hokkaido, Japan. The deposit is hosted by conglomerate, sandstone, and tuff of the Middle to Late Miocene Esashi Formation. These rocks were hydrothermally altered. Silica sinters and quartz‐adularia veins are common in the deposit. The quartz‐adularia veins either contain a ginguro band, which corresponds to the main gold‐bearing vein (Type 1 Veins), or do not contain a ginguro band but contain minor adularia (Type 2 Veins). Type 1 Veins are divided into three stages with 12–14 substages. Ore minerals identified include electrum, naumannite, chlorargyrite, bromargyrite, an unidentified Fe‐Sb mineral, and an Fe‐(Sb)‐As mineral. These ore minerals formed in the main mineralization stages I (bands I‐b and I‐d) and II (band II‐a). Scanning electron microscopy with cathodoluminescence images show that cathodoluminescence‐dark microcrystalline quartz exhibiting colloform (ghost‐sphere) texture is closely associated with ore minerals in the Type 1 Vein and Type 2 Vein, and the Al and K contents of such quartz are commonly >1000 ppm. This indicates that the ore minerals were crystallized from alkaline, silica‐saturated fluids at temperatures <200°C, which initially deposited amorphous silica that was recrystallized to microcrystalline quartz. The average Au content of electrum is 52.5 at% Au (n = 10), 65.7 at% Au (n = 20), and 55.5 at% Au (n = 5) in bands I‐b, I‐d, and II‐a, respectively, of Type 1 Veins. The δ34SCDT values of two fine‐grained disseminated pyrites in the altered conglomerate and bedded tuff in the argillic altered zone are ?4.3 and ?4.2‰. Ar‐Ar dating on adularia yielded 13.6 ± 0.06 Ma, 13.6 ± 0.07 Ma, and 13.6 ± 0.06 Ma for the stages I, II, and III of the Type 1 Vein, respectively. K‐Ar ages determined on adularia in the silica sinter and on whole‐rock of glassy rhyolite of the Esashi Formation are 15.0 ± 0.4 Ma and 14.6 ± 0.4 Ma, respectively. These radiometric ages indicate that silica sinter associated with the rhyolitic volcanic rocks formed prior to the main gold mineralization. 相似文献
14.
Oliver P. Kreuzer 《Mineralium Deposita》2006,40(6-7):639-663
Ore deposits of the Charters Towers Goldfield (CTGF) are mainly hosted by fault-fill veins. Extensional (∼8% of all veins) and stockwork-like (∼3%) veins are less common and of little economic significance. Crosscutting relationships and published structural and geochronological data indicate a Late Silurian to Early Devonian timing of gold mineralization, coincident with regional shortening (D4) and I-type magmatism. Paragenetic relationships, which are uniform in veins everywhere within the CTGF, suggest that vein formation commenced with the deposition of large volumes of buck quartz (stage I), followed by buck and comb quartz, and significant pyrite and arsenopyrite precipitation (stage II). Gold was introduced during stage III, after earlier sphalerite and coincident with galena and chalcopyrite. Narrow, discontinuous calcite veins of stage IV mark the waning of gold-related hydrothermal activity or a later unrelated episode. Ore zones within the veins are everywhere composed of comb and/or gray quartz, calcite and/or ankerite and bands or clusters of fractured pyrite that are spatially associated with galena, sphalerite or chalcopyrite. Low-grade or barren vein sections, on the other hand, are mainly composed of milky buck quartz with little evidence for modification, overprinting or interaction with later fluids. Gold-related hydrothermal wall-rock alteration is symmetrically zoned, displaying proximal sericite–ankerite and distal epidote–chlorite–hematite assemblages that may be taken to imply wall-rock interaction with near neutral fluids (pH 5–6). Isocon plots assuming immobile Al, P, Ti, Y and Zr consistently indicate As, K, Pb, S and Zn enrichment and Na, Si and Sr depletion in altered wall-rock specimens relative to the least altered rocks. Alteration assemblages, quartz textures, fault rocks and published fluid inclusion and stable isotope data imply that the veins were formed under conditions of episodic fluid overpressuring (∼0.9–3.8 kbar), at a depth of ∼7 km and a temperature of ∼310°C. The published fluid inclusion data also imply that gold precipitation may have been brought about by fluid mixing. However, physi- and chemisorption of gold complexes onto sulfide surfaces may have been important depositional processes and controls on gold enrichment at the millimeter to centimeter scale, given that most gold particles are attached to the surfaces of pyrite crystals of stage II or to etch-pits and fracture surfaces within the earlier pyrite. 相似文献
15.
Trace elements and cathodoluminescence of quartz in stockwork veins of Mongolian porphyry-style deposits 总被引：1，自引：0，他引：1
Axel Müller Richard Herrington Robin Armstrong Reimar Seltmann Douglas J. Kirwin Nina G. Stenina Andreas Kronz 《Mineralium Deposita》2010,45(7):707-727
The combination of scanning electron microscope–cathodoluminescence (CL), fluid inclusion analysis and high-resolution electron
probe microanalysis of Al, Ti, K and Fe in vein quartz has yielded results permitting a greater understanding of the complex
mineralisation of the Central Oyu Tolgoi and Zesen Uul porphyry-style deposits, southern Mongolia. These data demonstrate
the relationship between quartz precipitation, dissolution and ore deposition as the mineralising fluid chemistry changed
through time. Four major quartz generations are identified in the A-type veins from the stockworks of both the Central Oyu
Tolgoi (OTi to OTiv) and Zesen Uul deposits (ZUi to ZUiv). Despite differences in the associated alteration and mineralisation
style, the observed CL textures and trace element signatures of the quartz generations are comparable between deposits. The
OTi and ZUi stage formed both the primary network of A-type veins and pervasive silicification of the host rock. Using the
Ti-in-quartz geothermometer, crystallisation temperatures for OTi and ZUi of between 598°C and 880°C are indicated. The main
stage of sulphide mineralisation was accompanied by the dissolution of pre-existing quartz (OTi and ZUi) and precipitation
of a weakly luminescent generation of quartz (OTii and ZUii) with a low Ti content, reflected in a calculated temperature
drop from approximately 700°C to 340°C in Central Oyu Tolgoi and 445°C in Zesen Uul. OTii and ZUii stage quartzes show high
and variable Al concentrations. The next stage of quartz in both deposits (OTiii and ZUiii) forms a fine network of veins
in cracks formed in pre-existing quartz. OTiii and ZUiii quartz contain measurable fluid inclusions of moderate salinity (3–17.1 wt.%
NaCl eq.), entrapped in the temperature range 256°C to 385°C. OTiii and ZUiii are not related to any sulphide mineralisation.
The final OTiv and ZUiv stages are characterised by quartz–calcite micro-breccias that penetrate the A-type veins. Based on
the calculated entrapment temperatures, the OTiv/ZUiv stage crystallised between 212°C and 335°C, and the quartz is characterised
by elevated but variable Al and Fe contents. The CL and trace element signatures of the OTi to OTiii and ZUi to ZUiii stages
of the two Mongolian porphyries show similar features to those observed in porphyry-style deposits from other regions. This
suggests that a common sequence of quartz crystallisation occurs during the formation of early veins in many porphyry copper
systems. 相似文献
16.
The Huilvshan gold deposit in the west Junggar (Xinjiang, China) is hosted in chloritized basalts, chlorite–siderite-altered basalts, and quartz–siderite rocks. Our study demonstrated that all these rocks were derived by alteration of basalts in a shear zone. The orebodies, consisting of quartz-sulfide veins and disseminated sulfides, formed in five stages: quartz–muscovite (I), disseminated sulfides (II), quartz–ankerite-sulfide (III), quartz–calcite-sulfide (IV), and quartz–calcite (V). Auriferous minerals are native gold in stage III and electrum in stage IV. During alteration of basalts in the shear zone, ore-forming elements were released from basalts to ore-forming fluid. Compared with fresh basalts, sulfide-bearing chloritized basalts contain much higher Sr, Ba, P, La, Ce, U, Mn, Ni, Zn, As, Ag, and Au contents. Phase analysis of the As–Cu–Fe–S–O system with the SUPCRT92 software package indicates that a decrease of the aH2S value, caused by the fluid–rock reactions and crystallization of sulfides, induced gold precipitation. 相似文献
17.
R. Lira M.F. Poklepovic M.J. Dorais H.A. Millone G.M. Gomez 《Journal of South American Earth Sciences》2009,28(3):263-276
A deep epithermal vein system hosted in Late Proterozoic to Cambrian granodiorite has been identified in the Sierra Norte de Córdoba, the easternmost range of the Sierras Pampeanas Orientales of Argentina. The vein swarm extends over an area of 3 km2 parallel to a mylonitic belt and formed in fractured granodiorite. Thicknesses of veins are less than 0.5 m and their visible strike length is less than 100 m. Veins are either barren or weakly mineralized in base-metal sulfides. Most veins have mineral associations dominated by calcite and quartz with lesser amounts of chlorite, sericite, pyrite, and minor illite. In other less exposed albite-rich, adularia-bearing veins, chalcopyrite, bornite, galena, sphalerite, chalcocite and covellite may occur. The widespread occurrence of bladed calcite without any petrographic or microthermometric evidence of boiling implies that this particular habit of calcite may also develop under sub-near boiling fluid conditions. Thermometric calculations based on fluid inclusion data, chlorite composition and oxygen isotopes in the quartz–calcite pair, constrain the formation of the system between 300 and 350 °C, at pressures between 42 and 64 MPa (1.5–2.3 km). Stable isotope data suggest that W/R interaction might have been the most probable mechanism of alteration, involving the participation of meteoric fluids; nevertheless, the metallic signature of some weakly mineralized veins as well as intermediate fluid inclusion salinities favor a magmatic input and a mixed origin for the fluids. Textures and mineral associations, as well as the absence of evidence of boiling in fluid inclusions, all suggest that the silica–carbonate vein system formed deeper than typically shallow Au and Ag-bearing boiling solutions. A 485 (±25) Ma lamprophyre dike crosscuts some of these veins locally producing metasomatic reactions and skarn formation, which constrains the age of the hydrothermal system to the Cambrian-Early Ordovician time span. 相似文献
18.
Centimetre‐ to decimetre‐wide quartz+calcite veins in schistes lustrés from Alpine Corsica were formed during exhumation at 30–40 Ma following blueschist facies metamorphism. The δ18O and δ13C values of the veins overlap those of the host schistes lustrés, and the δ18O values of the veins are much higher than those of other rocks on Corsica. These data suggest that the vein‐forming fluids were derived from the schistes lustrés. Fluids were probably generated by reactions that broke down carpholite, lawsonite, chlorite and white mica at 300–350 °C during decompression between c. 1400 and 800 MPa. However, the δ18O values of the veins are locally several per mil higher than expected given those of their host rocks. The magnitude of oxygen isotope disequilibrium between the veins and the host rock is inversely proportional to the δ18O value of the host rock. Additionally, calcite in some schists is in isotopic equilibrium with calcite in adjacent veins, but not with the silicate fraction of the schists. Locally, the schists are calcite bearing only within 1–20 cm of the veins. The vein‐forming fluids may have been preferentially derived from calcite‐bearing, high‐δ18O rocks that are common within the schistes lustrés and that locally contain abundant (>15%) veins. If the fluids were unable to completely isotopically equilibrate with the rocks, due to relatively rapid flow at moderate temperatures or being confined to fractures, they could form veins with higher δ18O values than those of the surrounding rocks. Alteration of the host rocks was probably inhibited by isolation of the fluid in ‘quartz‐armoured’ veins. Overall, the veins represent a metre‐ to hectometre‐scale fluid‐flow system confined to within the schistes lustrés unit, with little input from external sources. This fluid‐flow system is one of several that operated in the western Alps during exhumation following high‐pressure metamorphism. 相似文献
19.
A Sr isotope study on fluorite and siderite from post-orogenic mineral veins in the eastern Harz Mountains,Germany 总被引：2，自引：0，他引：2
Rb–Sr isotope data for siderite and fluorite from sediment-hosted epithermal mineral veins in the eastern Harz Mountains (Germany)
are presented. Several fluorite and siderite-bearing paragenetic stages have been proposed for these veins, with the most
important mineralization being related to a quartz–sulfide and a subsequent calcite–fluorite–quartz stage, which occurred
at 226±1 and 209±2 Ma, respectively. Our Rb–Sr data do not permit the identification of distinct generations of siderite and
fluorite, but rather reveal straight internal mixing relations, reflecting mixing of fluids or differential fluid–rock interaction
processes. This indicates merely two significant phases of mineral deposition related to the quartz–sulfide and calcite–fluorite–quartz
stages. It is shown that the Paleozoic sedimentary host rocks of the veins are the most likely source for the siderite Sr,
whereas fluorite displays a two-component mixture between sedimentary Sr and radiogenic Sr derived from locally occurring
Permian metavolcanic rocks.
Editorial handling: B. Lehmann 相似文献
20.
Quartz‐rich veins in metapelitic schists of the Sanandaj‐Sirjan belt, Hamadan region, Iran, commonly contain two Al2SiO5 polymorphs, and, more rarely, three coexisting Al2SiO5 polymorphs. In most andalusite and sillimanite schists, the types of polymorphs in veins correlate with Al2SiO5 polymorph(s) in the host rocks, although vein polymorphs are texturally and compositionally distinct from those in adjacent host rocks; e.g. vein andalusite is enriched in Fe2O3 relative to host rock andalusite. Low‐grade rocks contain andalusite + quartz veins, medium‐grade rocks contain andalusite + sillimanite + quartz ± plagioclase veins, and high‐grade rocks contain sillimanite + quartz + plagioclase veins/leucosomes. Although most andalusite and sillimanite‐bearing veins occur in host rocks that also contain Al2SiO5, kyanite‐quartz veins crosscut rocks that lack Al2SiO5 (e.g. staurolite schist, granite). A quartz vein containing andalusite + kyanite + sillimanite + staurolite + muscovite occurs in andalusite–sillimanite host rocks. Textural relationships in this vein indicate the crystallization sequence andalusite to kyanite to sillimanite. This crystallization sequence conflicts with the observation that kyanite‐quartz veins post‐date andalusite–sillimanite veins and at least one intrusive phase of a granite that produced a low‐pressure–high‐temperature contact aureole; these relationships imply a sequence of andalusite to sillimanite to kyanite. Varying crystallization sequences for rocks in a largely coherent metamorphic belt can be explained by P–T paths of different rocks passing near (slightly above, slightly below) the Al2SiO5 triple point, and by overprinting of multiple metamorphic events in a terrane that evolved from a continental arc to a collisional orogen. 相似文献