首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Bed topography and grain size are predicted for steady, uniform flow in circular bends by consideration of the balance of fluid, gravity and frictional forces acting on bed load particles. Uniform flow pattern is adequately described by conventional hydraulic equations, with bed shear defined as that effectively acting on bed load grains. This analysis is used as a basis to predict bed topography and grain size for steady, non-uniform flow in non-circular bends (represented by a ‘sine-generated’ curve). The non-uniform flow pattern is calculated using the method of Engelund (1974a). Equilibrium bed form, hence sedimentary structure, is found by comparison of existing flow conditions with one of the schemes describing the hydraulic stability limits of the various bed forms. The model was compared with bankfull flow observations from a channel bend on the River South Esk, Scotland. Theoretical bed topography and velocity distribution were very close to the observed data. However, bed shear stress showed only a broad agreement, probably because of the use a constant friction coefficient value. Mean grain size distribution showed good agreement, but theory did not account adequately for gravel sizes in the talweg region and on the upstream, inner part of the bar, possibly due to theoretical underestimation of effective bed shear. Bed form and sedimentary structure are predicted well using the familiar stream power-grain size scheme. The behaviour of the model under unsteady uniform flow conditions in circular bends was analyzed, and suggests that any variation of grain size and bed topography with stage is likely to be limited to deeper parts of the channel.  相似文献   

2.
1 INTRODUCTION The plane shape of a river channel is very important for river improvement planning, because it must allow floodwater to flow off safely. Natural rivers wind from side to side, which creates meandering forms. From the history of river impro…  相似文献   

3.
Alternate bars have the property that they migrate downstream whenever floods occur. However, in meander channels whose bend angles are larger than a critical value, the migration of bars can be suppressed, and the positions of bank erosion and flood attack also will be steady. In this study, the bed morphology in flume channels with bends of various lengths and angles is investigated at various flow discharges, and the relation of bed morphology to surface flow is investigated in detail using fluid measuring software. An effort is made to obtain guidelines for the plane shape design of meander channels. Based on the experimental results of bed topography and measurement of surface flow direction and velocity distribution, from the viewpoint of bank erosion and the concentration and dispersion of flood flow the most suitable plane shape for meandering channels is suggested through which the migration of alternate bars is suppressed.  相似文献   

4.
Channel bars and banks strongly affect the morphology of both braided and meandering rivers. Accordingly, bar formation and bank erosion processes have been greatly explored. There is, however, a lack of investigations addressing the interactions between bed and bank morphodynamics, especially over short timescales. One major implication of this gap is that the processes leading to the repeated accretion of mid‐channel bars and associated widenings remain unsolved. In a restored section of the Drau River, a gravel‐bed river in Austria, mid‐channel bars have developed in a widening channel. During mean flow conditions, the bars divert the flow towards the banks. One channel section exhibited both an actively retreating bank and an expanding mid‐channel bar, and was selected to investigate the morphodynamic processes involved in bar accretion and channel widening at the intra‐event timescale. We repeatedly surveyed riverbed and riverbank topography, monitored riverbank hydrology and mounted a time‐lapse camera for continuous observation of riverbank erosion processes during four flow events. The mid‐channel bar was shown to accrete when it was submerged during flood events, which at the subsequent flow diversion during lower discharges narrowed the branch along the bank and increased the water surface elevation upstream from the riffle, which constituted the inlet into the branch. These changes of bed topography accelerated the flow along the bank and triggered bank failures up to 20 days after the flood events. Four analysed flow events exhibited a total bar expansion from initially 126 m2 to 295 m2, while bank retreat was 6 m at the apex of the branch. The results revealed the forcing role of bar accretion in channel widening and highlighted the importance of intra‐event scale bed morphodynamics for bank erosion, which were summarized in a conceptual model of the observed bar–bank interactions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

5.
This study assesses hydrodynamic and morphodynamic model sensitivity and functionality in a curved channel. The sensitivity of a depth‐averaged model to user‐defined parameters (grain size, roughness, transverse bed slope effect, transport relations and secondary flow) is tested. According to the sensitivity analysis, grain size, transverse bed slope effect and sediment transport relations are critical to simulated meander bend morphodynamics. The parametrization of grain size has the most remarkable effect: field‐based grain size parametrization is necessary in a successful morphodynamic reconstruction of a meander bend. The roughness parametrization method affects the distribution of flow velocities and therefore also morphodynamics. The combined effect of various parameters needs further research. Two‐dimensional (2D) and three‐dimensional (3D) reconstructions of a natural meander bend during a flood event are assessed against field measurements of acoustic Doppler current profiler and multi‐temporal mobile laser scanning data. The depth‐averaged velocities are simulated satisfactorily (differences from acoustic Doppler current profiler velocities 5–14%) in both 2D and 3D simulations, but the advantage of the 3D hydrodynamic model is unquestionable because of its ability to model vertical and near‐bed flows. The measured and modelled near‐bed flow, however, differed notably from each other's, the reason of which was left open for future research. It was challenging to model flow direction beyond the apex. The 3D flow features, which also affected the distribution of the bed shear stress, seem not to have much effect on the predicted morphodynamics: the 2D and 3D morphodynamic reconstructions over the point bar resembled each other closely. Although common features between the modelled and measured morphological changes were also found, some specific changes that occurred were not evident in the simulation results. Our results show that short‐term, sub‐bend scale morphodynamic processes of a natural meander bend are challenging to model, which implies that they are affected by factors that have been neglected in the simulations. The modelling of short‐term morphodynamics in natural curved channel is a challenge that requires further study. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

6.
The 1999 jökulhlaup at Sólheimajökull was the first major flood to be routed through the proglacial system in over 600 years. This study reconstructed the flood using hydrodynamic, sediment transport and morphodynamic numerical modelling informed by field surveys, aerial photograph and digital elevation model analysis. Total modelled sediment transport was 469 800 m3 (+/‐ 20%). Maximum erosion of 8.2 m occurred along the ice margin. Modelled net landscape change was –86 400 m3 (+/‐ 40%) resulting from –275 400 m3 (+/‐ 20%) proglacial erosion and 194 400 m3 (+/‐ 20%) proglacial deposition. Peak erosion rate and peak deposition rate were 650 m3 s‐1 (+/‐ 20%) and 595 m3 s‐1 (+/‐ 20%), respectively, and coincided with peak discharge of water at 1.5 h after flood initiation. The pattern of bed elevation change during the rising limb suggested widespread activation of the bed, whereas more organisation, perhaps primitive bedform development, occurred during the falling limb. Contrary to simplistic conceptual models, deposition occurred on the rising stage and erosion occurred on the falling limb. Comparison of the morphodynamic results with a hydrodynamic simulation illustrated effects of sediment transport and bed elevation change on flow conveyance. The morphodynamic model advanced flood arrival and peak discharge timings by 100% and 19%, respectively. However, peak flow depth and peak flow velocity were not significantly affected. We suggest that morphodynamic processes not only increase flow mass and momentum but that they also introduce a feedback process whereby flood conveyance becomes more efficient via erosion of minor bed protrusions and deposition that infills or subdues minor bed hollows. A major implication of this study is that reconstructions of outburst floods that ignore sediment transport, such as those used in interpretation of long‐term hydrological record and flood risk assessments, may need considerable refinement. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
Abstract

Steady currents develop in oceanic turbulence above topography even in the absence of steady forcing. Mesoscale steady currents are correlated with mesoscale topography with anticyclonic eddies above topographic bumps, and large scale westward flows develop when β is non-zero. The relationship between those two kinds of steady currents, as well as their dependence on various parameters, is studied using a barotropic quasi-geostrophic channel model. The percentage of steady energy is found to depend on the forcing, friction and topography in a non-monotonic fashion. For example, the percentage of steady currents grows with the energy level in the linear regime (low energies) and decreases when the energy level increases in the nonlinear regime (high energies). Mesoscale steady currents are the energy source for the steady westward flow U, and therefore U is the maximum when large scale and mesoscale currents are of the same order of magnitude. This happens when the ratio S of the large scale slope βH/f 0 and the mesoscale rms topographic slope α is of order one. U decreases for both small and large values of S.  相似文献   

8.
Streams and rivers, particularly smaller ones, often do not maintain steady flow rates for long enough to reach equilibrium conditions for sediment transport and bed topography. In particular, streams in small watersheds may be subject to rapidly changing hydrographs, and relict bedforms from previous high flows can cause further disequilibrium that complicates the prediction of sediment transport rates. In order to advance the understanding of how bedforms respond to rapid changes in flow rate,...  相似文献   

9.
Confluences with low discharge and momentum ratios, where narrow steep tributaries with high sediment load join a wide low‐gradient main channel that provides the main discharge, are often observed in high mountain regions such as in the upper‐Rhone river catchment in Switzerland. Few existing studies have examined the hydro‐morphodynamics of this type of river confluence while considering sediment discharge in both confluent channels. This paper presents the evolution of the bed morphology and hydrodynamics as observed in an experimental facility with a movable bed. For that purpose, one experiment was carried out in a laboratory confluence with low discharge and momentum ratios, where constant sediment rates were supplied to both flumes. During the experiment, bed topography and water surface elevations were systematically recorded. When the bed topography reached a steady state (so‐called equilibrium) and the outgoing sediment rate approximated the incoming rate, flow velocity was measured at 12 different points distributed throughout the confluence, and the grain size distribution of the bed surface was analyzed. Typical morphodynamic features of discordant confluences such as a bank‐attached bar and a flow deflection zone are identified in this study. Nevertheless, the presence of a marked scour hole in the discordant confluence and distinct flow regimes for the tributary and main channel, differ from results obtained in previous studies. Strong acceleration of the flow along the outer bank of the main channel is responsible for the scour hole. This erosion is facilitated by the sediment discharge into the confluence from the main channel which inhibits bed armoring in this region. The supercritical flow regime observed in the tributary is the hydrodynamic response to the imposed sediment rate in the tributary. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

10.
Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m?2 specific stream power) and one high‐energy (43·4 W m?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

11.
The dynamics of finite-amplitude bed forms in a tidal channel is studied with the use of an idealized morphodynamic model. The latter is based on depth-averaged equations for the tidal flow over a sandy bottom. The model considers phenomena on spatial scales of the order of the tidal excursion length. Transport of sediment mainly takes place as suspended load. The reference state of this model is characterized by a spatially uniform M2 tidal current over a fixed horizontal bed. The temporal evolution of deviations from this reference state is governed by amplitude equations: these are a set of non-linear equations that describe the temporal evolution of bed forms. These equations are used to obtain new morphodynamic equilibria which may be either static or time-periodic. Several of these bottom profiles show strong similarity with the tidal bars that are observed in natural estuaries. The dependence of the equilibrium solutions on the value of bottom friction and channel width is investigated systematically. For narrow channels (width small compared to the tidal excursion length) stable static equilibria exist if bottom friction is slightly larger than rcr. For channel widths more comparable to the tidal excursion length, multiple stable steady states may exist for bottom friction parameter values below rcr. Regardless of channel width, stable time-periodic equilibria seem to emerge as the bottom friction is increased.Responsible Editor: Jens Kappenberg  相似文献   

12.
Abstract

A new nonlinear stability criterion is derived for baroclinic flows over topography in spherical geometry. The stability of a wide class of exact three-dimensional nonlinear steady state solutions subject to arbitrary disturbances is established. The resonance condition, at the highest total wavenumber, for the steady state solutions and the stability criteria for baroclinic flow in the absence of topography provide the boundaries of the regions of stability in the presence of topography. The analogous results for flow on periodic or infinite beta planes incorporating non-orthogonal function large scale flows are also discussed.  相似文献   

13.
For most of the year, a dry‐bed desert wash is void of water flow. Intensive rain events, however, could trigger significant flash floods that bring about highly complicated hydrodynamics and morphodynamics processes within a desert stream. We present a fully coupled three‐phase flow model of air, water, and sediment to simulate numerically the propagation of a flash flood in a field‐scale fluvial desert stream, the so‐called Tex Wash located in the Mojave Desert, California, United States. The turbulent flow of the flash flood is computed using the three‐dimensional unsteady Reynolds‐averaged Navier–Stokes equations closed with the shear stress transport k ? ω model. The free surface of the flash flood at the interface of air and water phases is computed with the level‐set method, which enables instantaneous tracking of the water surface as the flash flood propagates over the dry bed of the desert stream. The evolution of the desert fluvial stream's morphology, due to the action of the propagating flash flood on the mobile bed, is calculated using a Eulerian morphodynamics model based on the curvilinear immersed boundary method. The capabilities of the proposed numerical framework are demonstrated by applying it to simulate a flash flood event in a 0.65‐km ‐long reach of the Tex Wash, the intricate channel morphology of which is obtained using light imaging detection and ranging technology. The simulated region of the stream includes a number of bridge foundations. The simulation results of the model for the flash flood event revealed the formation of a highly complex flow field and scour patterns within the stream. Moreover, our simulation results showed that most scour processes take place during the steady phase of the flash flood, that is, after the flash flood fills the stream. The transient phase of the flash flood is rather short and contributes to a very limited amount of erosion within the desert stream.  相似文献   

14.
  相似文献   

15.
An idealized morphodynamic model is used to gain further understanding about the formation and characteristics of shoreface-connected sand ridges and tidal sand banks on the continental shelf. The model consists of the 2D shallow water equations, supplemented with a sediment transport formulation and describes the initial feedback between currents and small amplitude bed forms. The behaviour of bed forms during both storm and fair weather conditions is analyzed. This is relevant in case of coastal seas characterized by tidal motion, where the latter causes continuous transport of sediment as bed load.The new aspects of this work are the incorporation of both steady and tidal currents (represented by an M2 and M4 component) in the external forcing, in combination with dominant suspended sediment transport during storms. The results indicate that the dynamics during storms and fair weather strongly differ, causing different types of bed forms to develop. Shoreface-connected sand ridges mainly form during storm conditions, whereas if fair weather conditions prevail the more offshore located tidal sand banks develop. Including the M4 tide changes the properties of the bed forms, such as growth rates and migration speeds, due to tidal asymmetry. Finally a probabilistic formulation of the storm and fair weather realization of the model is used to find conditions for which both types of large-scale bed forms occur simultaneously. These conditions turn out to be a low storm fraction and the presence strong tidal currents in combination with strong steady currents during storms.  相似文献   

16.
Alpine gravel-bed rivers are dynamic systems that have been subjected to many anthropic alterations in the past centuries. Riparian vegetation development on previously bare sediment bedforms has been a common adjustment, raising important management issues in terms of flood risks and biodiversity. Many of these rivers are also channelized, and as a result present a pattern of alternate bars. Considering recent advances in numerical biomorphodynamic modeling, this study aims at exploring numerically the morphodynamics of alternate bars in the presence of riparian vegetation. To this end, a dynamic vegetation module has been implemented on top of an existing morphodynamic model, accounting for ecological processes of seed dispersal, seedling recruitment, growth, and mortality. Numerical simulations have been performed on a simplified reach of a gravel-bed river with free migrating alternate bars at initial state. In this work 96 scenarios have been simulated, each representing 50 years of channel evolution, with different flood regimes characterized by various peak discharges and flood durations. Yearly peak discharge variability is explicitly modeled in 48 scenarios. Model outcomes present two possible equilibrium biomorphodynamic behaviors: stationary vegetated bars, or free migrating bars in the case of frequent vegetation removal during floods. This binary behavior holds true when the stochasticity of annual peak discharges is represented, and for a wide range of parameter values included in vegetation dynamic modeling. Transient mobility of vegetated bars is observed in specific configurations where large sediment deposits deflect the flow field, eroding bar heads. Modeled bar wavelengths are in the range of values predicted for free bars by linear bar theory, and remain far from the theoretical values of hybrid, steady bars. The shift from unvegetated migrating bars to steady vegetated bars seems to show that in these simulations vegetation constitutes a hydraulic forcing, leading to a shift from free bars to forced bars, with a final configuration largely inherited from the initial state. © 2019 John Wiley & Sons, Ltd.  相似文献   

17.
Recent research into flood modelling has primarily concentrated on the simulation of inundation flow without considering the influences of channel morphology. River channels are often represented by a simplified geometry that is implicitly assumed to remain unchanged during flood simulations. However, field evidence demonstrates that significant morphological changes can occur during floods to mobilize the boundary sediments. Despite this, the effect of channel morphology on model results has been largely unexplored. To address this issue, the impact of channel cross‐section geometry and channel long‐profile variability on flood dynamics is examined using an ensemble of a 1D–2D hydraulic model (LISFLOOD‐FP) of the ~1 : 2000 year recurrence interval floods in Cockermouth, UK, within an uncertainty framework. A series of simulated scenarios of channel erosional changes were constructed on the basis of a simple velocity‐based model of critical entrainment. A Monte‐Carlo simulation framework was used to quantify the effects of this channel morphology together with variations in the channel and floodplain roughness coefficients, grain size characteristics and critical shear stress on measures of flood inundation. The results showed that the bed elevation modifications generated by the simplistic equations reflected an approximation of the observed patterns of spatial erosion that enveloped observed erosion depths. The effect of uncertainty on channel long‐profile variability only affected the local flood dynamics and did not significantly affect the friction sensitivity and flood inundation mapping. The results imply that hydraulic models generally do not need to account for within event morphodynamic changes of the type and magnitude of event modelled, as these have a negligible impact that is smaller than other uncertainties, e.g. boundary conditions. Instead, morphodynamic change needs to happen over a series of events to become large enough to change the hydrodynamics of floods in supply limited gravel‐bed rivers such as the one used in this research. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

18.
Morphodynamic models are used by river practitioners and scientists to simulate geomorphic change in natural and artificial river channels. It has long been recognized that these models are sensitive to the choice of parameter values, and proper calibration is now common practice. This paper investigates the less recognized impact of the choice of the model itself. All morphodynamic models purport to simulate the same flow and sediment dynamics, often relying on the same governing equations. Yet in solving these equations, the models have different underlying assumptions, for example regarding spatial discretization, turbulence, sediment inflow, lateral friction, and bed load transport. These differences are not always considered by the average model user, who might expect similar predictions from calibrated models. Here, a series of numerical simulations in meandering channels was undertaken to test whether six morphodynamic codes (BASEMENT, CCHE‐2D, NAYS, SSIIM‐1, TELEMAC‐2D and TELEMAC‐3D) would yield significantly different equilibrium bathymetries if subjected to identical, initial flow conditions. We found that, despite producing moderately similar velocity patterns on a fixed‐flat bed (regression coefficient r of 0.77 ± 0.20), the codes disagree substantially with respect to simulated bathymetries (r = 0.49 ± 0.31). We relate these discrepancies to differences in the codes' assumptions. Results were configuration specific, i.e. codes that perform well for a given channel configuration do not necessarily perform well with higher or lower sinuosity configurations. Finally, limited correlation is found between accuracy and code complexity; the inclusion of algorithms that explicitly account for the effects of local bed slope and channel curvature effects on transport magnitude and direction does not guarantee accuracy. The range of solutions obtained from the evaluated codes emphasizes the need for carefully considering the choice of code. We recommend the creation of a central repository providing universal validation cases and documentation of recognized fluvial codes in commonly studied fluvial settings. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

19.
Riparian vegetation influences hydraulic and morphodynamic river processes and may contribute to sediment stabilization. In turn, vegetation recruitment and growth on non‐cohesive fluvial deposits strongly depends on river hydrology and the ability of roots to develop and to anchor efficiently to resist flow erosion. In this paper, we examine the above‐ground and the below‐ground seasonal growth dynamics of Salix cuttings in relation to local river hydrodynamics and morphodynamics, on the basis of a detailed and unique data set. During the two season‐long campaigns in 2009 and 2010, 1188 and 1152 cuttings, respectively, were organized in square plots and planted on a gravel island of the restored reach of the River Thur (Neunforn, Thurgau, Switzerland). Each year, all cuttings were monitored almost regularly from the beginning until the end of the growing season (April–September). Root development statistics were also obtained from high‐resolution scanner analysis of carefully uprooted samples from selected plots. Our results show how cutting survival and the nature and strength of correlations between island topography and cutting growth statistics depend on river hydrology. An empirical functional form that links root development based on the measured main stem length is then proposed for predictive purposes. Cutting mortality following flood events is shown to depend nonlinearly on both erosion and deposition processes, whereas it appears more linearly related to the magnitude of the bed shear stress distribution generated by the maximum seasonal flood. This analysis allows an identification of an important threshold for plant survival within different erosion and deposition regimes, which explains the spatial and temporal distribution of the surviving cuttings within the plots. These results have practical implications, for instance, for evaluating, planning and managing the use of riparian trees in restoration projects. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

20.
Sediment often enters rivers in the form of sediment pulses associated with landslides and debris flows. This is particularly so in gravel‐bed rivers in earthquake‐prone mountain regions, such as Southwest China. Under such circumstances, sediment pulses can rapidly change river topography and leave the river in repeated states of gradual recovery. In this paper, we implement a one‐dimensional morphodynamic model of river response to pulsed sediment supply. The model is validated using data from flume experiments, so demonstrating that it can successfully reproduce the overall morphodynamics of experimental pulses. The model is then used to explore the evolution of a gravel‐bed river subject to cycled hydrographs and repeated sediment pulses. These pulses are fed into the channel in a fixed region centered at a point halfway down the calculational domain. The pulsed sediment supply is in addition to a constant sediment supply at the upstream end. Results indicate that the river can reach a mobile‐bed equilibrium in which two regions exist within which bed elevation and surface grain size distribution vary periodically in time. One of these is at the upstream end, where a periodic discharge hydrograph and constant sediment supply are imposed, and the other is in a region about halfway down the channel where periodic sediment pulses are introduced. Outside these two regions, bed elevation and surface grain size distribution reach a mobile‐bed equilibrium that is invariant in time. The zone of fluctuation‐free mobile‐bed equilibrium upstream of the pulse region is not affected by repeated sediment pulses under the scenarios tested, but downstream of the pulse region, the channel reaches different fluctuation‐free mobile‐bed equilibriums under different sediment pulse scenarios. The vertical bed structure predicted by the simulations indicates that the cyclic variation associated with the hydrograph and sediment pulses can affect the substrate stratigraphy to some depth. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号