共查询到20条相似文献，搜索用时 31 毫秒
1.
Ernesto Heredia‐Zavoni Sandra Santa‐Cruz Francisco L. Silva‐González 《地震工程与结构动力学》2015,44(13):2241-2260
A formulation is developed for modal response analysis of multi‐support structures using a random vibration approach. The spectral moments of the structural response are rigorously decomposed into contributions from spectral moments of uncoupled modal responses. An advantage of the proposed formulation is that the total dynamic response can be obtained on the basis of mode by mode uncoupled analyses. The contributions to the total response from modal responses under individual support ground motions and under cross‐correlated pairs of support ground motions can be recognized explicitly. The application and performance of the formulation is illustrated by means of an example using a well‐established coherency spectrum model and widely known power spectra models, such as white noise and Kanai–Tajimi. The first three spectral moments of displacement, shear, and bending moment responses are computed, showing that the formulation produces the same results as the exact solution. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
The existing rules for combining peak response to individual components of ground motion are evaluated. The response values re to two horizontal components of ground motion estimated by four multicomponent combination rules—SRSS‐, 30%‐, 40%‐ and simplified‐SRSS‐rules—are compared with the critical response, rcr, obtained by the CQC3‐rule, which takes into account the direction of the principal ground components with respect to the structural axes and provides the largest response over all possible seismic incident angles. The following results are obtained in the first part of the paper and are valid for any elastic structure and any earthquake design response spectrum: For realistic values of the ratio γ of the design spectra for the two principal components of ground motion the SRSS‐rule estimate lies between 0.79rcr and 1.00rcr, the Simplified‐SRSS‐rule estimate lies between 1.00rcr and 1.26rcr, the 40%‐rule estimate lies between 0.99rcr and 1.25rcr, and the 30%‐rule estimate lies between 0.92rcr and 1.16rcr. None of the multicomponent combination rules account for the increase in response of systems if the vibration periods of the two modes that contribute most to the response to the x‐ and y‐components of ground motion are close to each other. Evaluated in the second part of the paper is the accuracy of the multicomponent combination rules in estimating the response of a range of one‐storey systems with (a) symmetrical plan and (b) unsymmetrical plan, and of two multistorey buildings. The SRSS‐rule underestimates the response by up to 16% and the other three rules overestimate it by up to 18%. Although these errors appear to be smaller than the many approximations inherent in structural design, they can be eliminated with very little additional computation by using an explicit formula for the critical response based on the CQC3 rule. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
3.
A procedure is presented to determine new modal combination rules (both CQC and SRSS) for non‐classically damped structures. The procedure presented in this paper does not need the solution of any complex eigenvalue problem, in contrast to other methods found in the literature. Thus, the modal combination rules presented here are easily applicable, even by those engineers who are unaccustomed to using complex algebra. Moreover, these formulations show the further advantage of requiring the response spectra only for the target damping ratio value. So the use of approximated formulae, necessary for passing from the response spectrum with the target damping ratio value to other ones, is avoided. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
4.
Extended MSRS rule for seismic analysis of bridges subjected to differential support motions 总被引：1，自引：0，他引：1
This paper introduces a generalized formulation of the multiple support response spectrum (MSRS) method (Earthquake Engng Struct. Dyn. 1992; 21 :713–740) and extends it by accounting for the quasi‐static contributions of truncated modes. The generalized formulation allows consideration of response quantities that involve support degrees of freedom (DOF). This situation arises for many response quantities of interest when rotational DOF are condensed out. New cross‐correlation coefficients are introduced in the extended rule and a parametric study is performed to gain insight and identify cases of ground motion spatial variability in which these terms are significant. An efficient computer implementation of the extended MSRS method is described and used for comprehensive analysis of two real bridge models with vastly different structural characteristics. The specified input is in accordance with standards used in engineering practice. The effects of differential support motions, including the influence of spatially varying soil conditions, on the pseudo‐static and dynamic components and the total response are examined and the improvement achieved with the extended MSRS method is assessed. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
5.
Predictors of seismic structural demands (such as inter‐storey drift angles) that are less time‐consuming than nonlinear dynamic analysis have proven useful for structural performance assessment and for design. Luco and Cornell previously proposed a simple predictor that extends the idea of modal superposition (of the first two modes) with the square‐root‐of‐sum‐of‐squares (SRSS) rule by taking a first‐mode inelastic spectral displacement into account. This predictor achieved a significant improvement over simply using the response of an elastic oscillator; however, it cannot capture well large displacements caused by local yielding. A possible improvement of Luco's predictor is discussed in this paper, where it is proposed to consider three enhancements: (i) a post‐elastic first‐mode shape approximated by the deflected shape from a nonlinear static pushover analysis (NSPA) at the step corresponding to the maximum drift of an equivalent inelastic single‐degree‐of‐freedom (SDOF) system, (ii) a trilinear backbone curve for the SDOF system, and (iii) the elastic third‐mode response for long‐period buildings. Numerical examples demonstrate that the proposed predictor is less biased and results in less dispersion than Luco's original predictor. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
6.
7.
This paper presents a response spectrum analysis procedure for the calculation of the maximum structural response to three translational seismic components that may act at any inclination relative to the reference axes of the structure. The formula GCQC3, a generalization of the known CQC3‐rule, incorporates the correlation between the seismic components along the axes of the structure and the intensity disparities between them. Contrary to the CQC3‐rule where a principal seismic component must be vertical, in the GCQC3‐rule all components can have any direction. Besides, the GCQC3‐rule is applicable if we impose restrictions to the maximum inclination and/or intensity of a principal seismic component; in this case two components may be quasi‐horizontal and the third may be quasi‐vertical. This paper demonstrates that the critical responses of the structure, defined as the maximum and minimum responses considering all possible directions of incidence of one seismic component, are given by the square root of the maximum and minimum eigenvalues of the response matrix R , of order 3×3, defined in this paper; the elements of R are established on the basis of the modal responses used in the well‐known CQC‐rule. The critical responses to the three principal seismic components with arbitrary directions in space are easily calculated by combining the eigenvalues of R and the intensities of those components. The ratio rmax/rSRSS between the maximum response and the SRSS response, the latter being the most unfavourable response to the principal seismic components acting along the axes of the structure, is bounded between 1 and √(3γa2/(γa2 + γb2 + γc2)), where γa?γb?γc are the relative intensities of the three seismic components with identical spectral shape. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
8.
In stochastic analysis the knowledge of cross-correlation coefficients is required in order to combine the response of the modal Single-Degree-Of-Freedom (SDOF) oscillators for obtaining the nodal response. Moreover these coefficients play a fundamental role in the seismic analysis of structures when the response spectrum method is used. In fact they are used in some modal combination rules in order to obtain the maximum response quantities starting from the modal maxima. Herein a method for the evaluation of the cross-correlation coefficients for non-classically damped systems is presented. It is defined in the time domain instead of the frequency domain as usually encountered in the literature. Although non-classically damped structures possess complex eigenproperties, the great advantage in using this approach lies in the fact that the evaluation of these coefficients does not require complex quantities. Moreover a further particularization of the presented method allows a simple application of the spectrum analysis requiring only one response spectrum for an assigned damping ratio. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
9.
The non‐stationary cross‐correlation coefficients in the seismic analysis of MDOF structural systems
A method concerning the evaluation, in a very compact form, of the non‐stationary modal cross‐correlation coefficients of MDOF structural systems subjected to seismic excitations is presented. It is available both in the case when the excitation is considered as a white‐noise process and when it is considered as a filtered process. The evaluation of these coefficients is required when a transient seismic analysis is performed by the use of the modal response spectrum approach. This is necessary when the strong‐motion phase of the earthquake is significantly short with respect to the fundamental period of the structure. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
10.
The modal combination rules commonly used in response spectrum analyses implicitly assume that the peak factor associated with the response quantity of interest is equal to the peak factors of the contributing modal responses. In this paper, we examine the validity of this assumption and demonstrate that it causes the modal combination rules to over‐represent the contribution of the higher modes of vibration to the total response and under‐represent the contribution of the lower modes. Consequently, a response‐spectrum‐based analysis can yield a biased estimate for the peak value of a response quantity when two or more well‐separated modal frequencies make significant contributions to the total response. To correct this potential bias in response‐spectrum‐based estimates, we develop a procedure for estimating the peak factors that is suitable to the response spectrum analysis calculations commonly used in the current design practice. Examples are presented to demonstrate the proper use and potential impact of the proposed procedure. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
The responses, re, given by several multicomponent combination rules used in seismic codes for determining peak responses to three ground motion components are evaluated for elastic systems and compared with the critical response rcr; this is defined as the largest response for all possible incident angles of the seismic components and obtained by means of the CQC3‐rule when a principal seismic component is vertical, or the GCQC3‐rule when it departs from the vertical direction. The combination rules examined are the SRSS‐, 30%‐, 40%‐ and IBC‐rules, considering different alternatives for the design horizontal spectrum. Assuming that a principal seismic component is along the vertical direction, the upper and lower bounds of the ratio re/rcr for each combination rule are determined as a function of the spectral intensity ratio of the horizontal seismic components and of the responses to one seismic component acting alternately along each structural axis. Underestimations and overestimations of the critical response are identified for each combination rule and each design spectrum. When a component departs from the vertical direction, the envelopes of the bounds of the ratio re/rcr for each combination rule are calculated, considering all possible values of the spectral intensity ratios. It is shown that the inclination of a principal component with respect to the vertical axis can significantly reduce the values of re/rcr with respect to the case when the component is vertical. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
12.
A method for stochastic seismic response analysis of non-classically damped structures 总被引：2，自引：1，他引：1
A method to calculate the stationary random response of a non-classically damped structure is proposed that features clearly-defined physical meaning and simple expression. The method is developed in the frequency domain, The expression of the proposed method consists of three terms, i.e., modal velocity response, modal displacement response, and coupled (between modal velocity and modal displacement response), Numerical results from the parametric study and three example structures reveal that the modal velocity response term and the coupled term are important to structural response estimates only for a dynamic system with a tuned mass damper. In typical cases, the modal displacement term can provide response estimates with satisfactory accuracy by itself, so that the modal velocity term and coupled term may be ignored without loss of accuracy, This is used to simplify the response computation of non-classically damped structures. For the white noise excitation, three modal correlation coefficients in closed form are derived. To consider the modal velocity response term and the coupled term, a simplified approximation based on white noise excitation is developed for the case when the modal velocity response is important to the structural responses. Numerical results show that the approximate expression based on white noise excitation can provide structural responses with satisfactory accuracy~ 相似文献
13.
This paper deals with the construction of seismic response interaction diagrams that show the correlation of multiple responses and are important to determine the critical combination of modal responses. Many design problems, such as column design under combined axial force and bending moments, fall into this category. We address general modal and multicomponent combination rules and study their effect on the shape of the response interaction diagrams, thus extending previous work done for quadratic combination rules. Special attention is given to multilinear combination rules which lead to polyhedral shapes. Having developed efficient methods to deal with polyhedral shapes, we explore the idea of adopting a multilinear modal combination rule to compose with a multicomponent percentage rule. 相似文献
14.
Interval complete quadratic combination rule for the response spectrum analysis of buildings with accidental eccentricity 
下载免费PDF全文
下载免费PDF全文 The accidental torsion, caused by several sources of structural uncertainties, gets the elastic response of a building different from that computed. To take into account of these uncertainties, building codes impose the introducing in every storey of the buildings an artificial eccentricity, called accidental, as a fraction of the plan dimension. Because, according to building codes, the accidental eccentricity can mathematically be expressed as a modification of the mass matrix, it follows that each mass modifications require new dynamic analyses that could be cumbersome from a numerical point of view. This paper proposes a new combination rule to obtain in closed form the maximum responses of structures with mass modification by the response spectrum analysis (RSA) without solving any further eigenproblem. In particular, the proposed procedure, based on the application to the RSA of the interval perturbation method, leads to an extension of the classical complete quadratic combination rule to the analysis of structural systems with uncertain‐but‐bounded parameter. In particular, for structural systems with accidental eccentricity, the proposed approach allows to directly evaluate the worst condition for the structural elements with a single RSA. This very remarkable result is obtained by adopting a new modal combination rule, here called interval complete quadratic combination. Numerical results evidence a very good accuracy of the interval complete quadratic combination for single‐storey buildings as well as for the analyzed multistorey buildings. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
15.
An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
16.
The use of uniform hazard spectra which have the same probability of exceedance at different frequencies has been proposed for the future version of the National Building Code of Canada. Commonly used combination rules to estimate the peak responses of multi‐degree‐of‐freedom (MDOF) systems are the square root of sum of squares rule and the complete quadratic combination rule. However, the probability that the peak response of a MDOF system exceeds the one estimated by using these rules with the peak modal responses from the uniform hazard spectra cannot be inferred directly. The assessment of the probability of exceedance of the peak response of MDOF systems is presented by considering that the uncertainty in seismic excitation due to all potential earthquakes can be lumped in the power spectral density function of the ground acceleration with uncertain model parameters. This probability is evaluated based on the random vibration of linear systems and the first‐order reliability method. It is found that the under‐ or over‐estimations are less than about 5 or 10% if the modal contributions are not within 10–90% of, or not within 20–80% of, the absolute sum of the effective modal peak responses, respectively. Otherwise, severe under‐ or over‐estimation could result. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
17.
An Incremental Response Spectrum Analysis Procedure Based on Inelastic Spectral Displacements for Multi-Mode Seismic Performance Evaluation 总被引：1，自引：0，他引：1
M. Nuray Aydinoğlu 《Bulletin of Earthquake Engineering》2003,1(1):3-36
The so-called Nonlinear Static Procedure (NSP) based on pushover analysis has been developed in the last decade as a practical
engineering tool to estimate the inelastic response quantities in the framework of performance-based seismic evaluation of
structures. However NSP suffers from a major drawback in that it is restricted with a single-mode response and therefore the
procedure can be reliably applied only to the two-dimensional response of low-rise, regular buildings. Recognizing the continuously
intensifying use of the pushover-based NSP in the engineering practice, the present paper attempts to develop a new pushover
analysis procedure to cater for the multi-mode response in a practical and theoretically consistent manner. The proposed Incremental
Response Spectrum Analysis (IRSA) procedure is based on the approximate development of the so-called modal capacity diagrams,
which are defined as the backbone curves of the modal hysteresis loops. Modal capacity diagrams are used for the estimation
of instantaneous modal inelastic spectral displacements in a piecewise linear process called pushover-history analysis. It
is illustrated through an example analysis that the proposed IRSA procedure can estimate with a reasonable accuracy the peak
inelastic response quantities of interest, such as story drift ratios and plastic hinge rotations as well as the story shears
and overturning moments. A practical version of the procedure is also developed which is based on the code-specified smooth
response spectrum and the well-known equal displacement rule.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
18.
The peak dynamic responses of two mathematical models of a fifteen-storey steel moment resisting frame building subjected to three earthquake excitations are computed by the response spectrum and time history methods. The models examined are: a ‘regular’ building in which the centres of stiffness and mass are coincident resulting in uncoupled modes with well-separated periods in each component direction of response; and an ‘irregular’ building with the mass offset from the stiffness centre of the building causing coupled modes with the translational modes having closely spaced periods. Four response spectrum modal combination rules are discussed and are used to predict the peak responses: (1) the square root of the sum of the squares (SRSS) method; (2) the double sum combination (DSC) method; (3) the complete quadratic combination (CQC) method; and (4) the absolute sum (ABS) method. The response spectrum results are compared to the corresponding peak time history values to evaluate the accuracy of the different combination rules. The DSC and the CQC methods provide good peak response estimates for both the regular and irregular building models. The SRSS method provides good peak response estimates for the regular building, but yields significant errors in the irregular building response estimates. The poor accuracy in the irregular building results is attributable to the effects of coupled modes with closely spaced periods. It is concluded that the DSC and CQC methods produce response estimates of equivalent accuracy. Both methods are recommended for general use. In addition to the DSC and CQC rules, the SRSS method is recommended for systems where coupled modes with closely spaced periods do not dominate the response. 相似文献
19.
This paper presents an efficient procedure to determine the natural frequencies, modal damping ratios and mode shapes for torsionally coupled shear buildings using earthquake response records. It is shown that the responses recorded at the top and first floor levels are sufficient to identify the dominant modal properties of a multistoried torsionally coupled shear building with uniform mass and constant eccentricity even when the input excitation is not known. The procedure applies eigenrealization algorithm to generate the state‐space model of the structure using the cross‐correlations among the measured responses. The dynamic characteristics of the structure are determined from the state‐space realization matrices. Since the mode shapes are obtained only at the instrumented floor (top and first floors) levels, a new mode shape interpolation technique has been proposed to estimate the mode shape coefficients at the remaining floor levels. The application of the procedure has been demonstrated through a numerical experiment on an eight‐storied torsionally coupled shear building subjected to earthquake base excitation. The results show that the proposed parameter identification technique is capable of identifying dominant modal parameters and responses even with significant noise contamination of the response records. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
20.
It is well-known that the application of the Square-Root-of-Sum-of-Squares (SRSS) method in seismic analysis for combining modal maxima can cause significant errors. Nevertheless, this method continues to be used by the profession for significant buildings. The purpose of this note is to present an improved technique to be used in place of the SRSS method in seismic analysis. A Complete Quadratic Combination (CQC) method is proposed which reduces errors in modal combination in all examples studied. The CQC method degenerates into the SRSS method for systems with well-spaced natural frequencies. Since the CQC method only involves a small increase in numerical effort, it is recommended that the new approach be used as a replacement for the SRSS method in all response spectrum calculations. 相似文献