共查询到20条相似文献，搜索用时 93 毫秒
1.
提出一种多向荷载作用下层状地基中刚性桩筏基础的计算方法。基于剪切位移法,采用传递矩阵形式分析了竖向荷载下桩顶面-桩顶面相互作用;引入修正桩侧地基模量,采用有限差分法分析了水平荷载下桩顶面-桩顶面相互作用;基于层状弹性半空间理论,分析了多向荷载下桩顶面-土表面、土表面-桩顶面、土表面-土表面的相互作用关系。建立了桩土体系柔度矩阵,得到了多向荷载下层状地基中刚性桩筏基础的受力和变形的关系以及桩的内力和变形沿桩身分布规律。通过与有限元对比,验证了该方法的合理性和修正地基模量的优越性,并对多向荷载作用下的桩筏基础进行了计算分析,计算结果表明,水平力将会引起桩筏基础的倾斜。 相似文献
2.
A Winkler model approach for vertically and laterally loaded piles in nonhomogeneous soil 总被引：1，自引：0，他引：1
Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2012,36(17):1869-1897
An investigation is made to present analytical solutions provided by a Winkler model approach for the analysis of single piles and pile groups subjected to vertical and lateral loads in nonhomogeneous soils. The load transfer parameter of a single pile in nonhomogeneous soils is derived from the displacement influence factor obtained from Mindlin's solution for an elastic continuum analysis, without using the conventional form of the load transfer parameter adopting the maximum radius of the influence of the pile proposed by Randolph and Wroth. The modulus of the subgrade reaction along the pile in nonhomogeneous soils is expressed by using the displacement influence factor related to Mindlin's equation for an elastic continuum analysis to combine the elastic continuum approach with the subgrade reaction approach. The relationship between settlement and vertical load for a single pile in nonhomogeneous soils is obtained by using the recurrence equation for each layer. Using the modulus of the subgrade reaction represented by the displacement influence factor related to Mindlin's solution for the lateral load, the relationship between horizontal displacement, rotation, moment, and shear force for a single pile subjected to lateral loads in nonhomogeneous soils is available in the form of the recurrence equation. The comparison of the results calculated by the present method for single piles and pile groups in nonhomogeneous soils has shown good agreement with those obtained from the more rigorous finite element and boundary element methods. It is found that the present procedure gives a good prediction on the behavior of piles in nonhomogeneous soils. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
Sanjay Kumar Shukla Ashish Gupta Nagaratnam Sivakugan 《Geotechnical and Geological Engineering》2011,29(4):613-618
In this paper, an analytical expression for the deflection of a thin circular elastic plate resting on the Pasternak foundation
is derived by adopting the strain energy approach. The parametric study is carried out to observe the location of the plate
lift-off and the variation of the deflection profiles for comparing the variation pattern reported in the literature based
on an approximate solution technique. It is found that the radial distance of the point of lift-off of the plate decreases
with increase in the values of both the shear modulus and the modulus of subgrade reaction of the foundation soil; the reduction
being more for their lower values. It is also observed that the variation in deflection of the plate at any radial distance
due to change in soil subgrade conditions is significant for lower values of modulus of subgrade reaction. 相似文献
4.
In this paper, a method is developed for nonlinear analysis of laterally loaded rigid piles in cohesionless soil. The method assumes that both the ultimate soil resistance and the modulus of horizontal subgrade reaction increase linearly with depth. By considering the force and moment equilibrium, the system equations are derived for a rigid pile under a lateral eccentric load. An iteration scheme containing three main steps is then proposed to solve the system equations to obtain the response of the pile. To determine the ultimate soil resistance and the modulus of horizontal subgrade reaction required in the analysis, related expressions are selected by reviewing and assessing the existing methods. The degradation of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The developed method is validated by comparing its results with those of centrifugal tests and three-dimensional finite element analysis. Applications of the developed method to laboratory model and field test piles also show good agreement between the predictions and the experimental results. 相似文献
5.
Flexural response of piles under liquefied soil conditions 总被引：1，自引：1，他引：1
The paper pertains to the development of a generalized procedure to analyze and predict the flexural behavior of axially and
laterally loaded pile foundations under liquefied soil conditions. Pseudo-static analysis has been carried out taking into
consideration the combined effect of axial load and lateral load. Based on the available literature effect of degradation
on the modulus of subgrade reaction due to soil liquefaction has been incorporated in the analysis. The developed program
was calibrated and validated by comparing the predicted behavior of the pile with theoretical and experimental results reported
in literature. The predicted behavior has been found to be in excellent to very good agreement with the theoretical and observed
values in the field, respectively. The present study highlights the importance of considering the axial load from the superstructure
along with the inertia forces from the superstructure and the kinematic forces from the liquefied soil in the design of pile
foundations in liquefiable areas. The significance of densification of the soil in the liquefiable areas and presence of an
adequate top non-liquefied soil cover causing appreciable reduction in deflection and bending moment experienced by the piles
has been highlighted. 相似文献
6.
基于线弹性动力学理论,结合坐标变换,建立了移动荷载作用下非均匀弹性半平面地基的动力控制方程,利用半解析法研究了移动荷载作用下二维非均匀地基的动力响应问题。采用傅里叶（Fourier）级数展开,假设了响应函数的级数形式,通过理论推导获得了剪切模量随深度任意变化的非均匀地基在移动荷载作用下各物理量的解析表达式。考虑土体的剪切模量沿厚度方向按幂函数梯度变化,通过数值算例分析并讨论了地基非均匀参数、荷载移动速度以及地基表面的剪切模量等对地基力学响应的影响规律,并与均质地基的计算结果进行了比较。数值结果表明：地基中各点的竖向位移随着土体表面剪切模量和表征土体非均匀性的梯度因子的增大而减小,随着荷载移动速度的增大而增大。在移动荷载作用下,非均匀地基与均匀地基的动力响应有着显著的区别。 相似文献
7.
对横观各向同性地基上刚性矩形板进行了求解。首先,利用表面受矩形均布荷载作用下的层状横观各向同性地基的位移解答,获得地基的柔度矩阵;然后,通过刚性矩形基础与层状横观各向同性地基的协调条件,建立刚性矩形基础与横观各向同性地基共同作用的方程,进而求得基础的地基反力。通过编制相应的程序,确定了合理的网格划分值;最后,进行算例分析,分析了地基横观各向同性性质、矩形刚性基础的长宽比以及地基分层性对地基反力的影响。分析表明：以上3种因素对地基反力有重要影响。 相似文献
8.
This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
One of the key problems in the implementation of Winkler models to analyze tunnelling effects on existing pipelines lies in the assessment of subgrade modulus under external soil displacement. In this paper, an expression of the Winkler subgrade modulus for a pipeline buried at arbitrary depth and subjected to free soil displacement with arbitrary curve shape is given. Using superposition principle and the Fourier integral, the subgrade modulus of an infinite beam resting on the surface of an elastic half space and buried infinitely are obtained respectively. Then the influence of embedment depth is estimated based on Mindlin and Kelvin solution. The validity of the proposed subgrade modulus is verified by comparison with the results from an elastic continuum solution and two centrifuge model tests for the responses of buried pipeline due to nearby tunnelling. Thereafter, parametric studies are shown to assess the accuracy of the proposed subgrade modulus by comparing with an elastic continuum solution in homogeneous and non-homogeneous soil stratum and the amount of error is estimated. 相似文献
10.
This paper proposes a modified strain wedge model for the nonlinear analysis of laterally loaded single piles in sandy soils by using the Duncan–Chang model as well as the Mohr–Coulomb model to describe the stress–strain behavior of soils in the strain wedge. The input soil property for sandy soils only needs a relative density which can be easily estimated from in situ tests. The strain wedge depth is calculated by an iterative process and the subgrade reaction modulus below the strain wedge is assumed to increase linearly with depth, though it does not change with the lateral load applied to the pile. Seven case histories are used to verify the applicability of the proposed method. The results show the following: (1) good agreements are found between the predicted and the measured results of full scale tested piles; (2) the predicted deflections and moments using the Duncan–Chang model are almost the same as those using the Mohr–Coulomb model; and (3) the size effect of the pile diameter or width on the subgrade reaction modulus should be considered. 相似文献
11.
包裹式土工格栅加筋土挡墙在工程中的设计分析仍采用基于极限平衡理论的锚固楔体法,而没有考虑在达到极限平衡之前加筋土挡墙所发生的变形发展和积累过程。加筋土挡墙面板的水平位移是墙体内外部稳定的重要体现。通过采用有限元数值方法,分析了不同工程因素对包裹式土工格栅加筋土挡墙面板处工后水平位移的影响,分析结果表明,FEM计算值和实测值接近,说明了有限元计算分析的适用性;包裹式土工格栅加筋土挡墙面板处的工后水平位移呈由下向上增大趋势;拉筋刚度、长度、竖向间距对水平位移具有明显的影响并应选择适宜数值,以实现加筋土挡墙的良好工程性能;挡墙墙顶处外荷载大小及位置对水平位移具有相应影响,位于加筋区外的外荷载对墙面水平位移影响不明显。 相似文献
12.
Determination of the in situ engineering properties of foundation materials has always been a challenge for geotechnical engineers and, thus, several methods have been developed so far. Dynamic Cone Penetration (DCP) test is one of the most versatile amongst them. In the present research, a light weight simple DCP device was developed and used for evaluation of the engineering properties of sandy soils in laboratory conditions. The device consisted of an 8-kg hammer that drops over a height of 575 mm, and drives a 60° cone tip with 20 mm base diameter into the ground. To control the validation of the results, laboratory direct shear and plate load tests were used as reference tests. The soil sample was a poorly graded sandy soil (SP) taken from alluvial deposits of the Tehran plain. All DCP tests and PLTs were undertaken on compacted soil in a mould with 700 mm diameter and 700 mm height. Based on the results of the experiments, the relationships between Dynamic Penetration Index (DPI), relative density (Dr), modulus of elasticity (E), shear modulus (G), modulus of subgrade reaction (KS), and the friction angle of the soil were obtained with a high coefficient of determination (> 90%). The repeatability of the test results was also evaluated by calculating the coefficient of variations (Cv), which was less than 30% for all tests. 相似文献
13.
Measurement of small strain behavior of a local soil by fiber Bragg grating-based local displacement transducers 总被引：1，自引：0，他引：1
The small strain stiffness of soils has a significant role in geotechnical design and analysis. In laboratory, the small strain behavior is examined by different techniques including the bender element method for measuring the maximum shear modulus and local displacement transducer (LDT) for measuring Young’s modulus at small strains. However, most commonly used LDTs are based on electrical components and have limitations, such as electromagnetic interference and possibility of short circuit in the presence of water. To overcome these limitations, in the present study, a conventional triaxial apparatus has been modified to measure and study the stress–strain behavior of soils at small strains. The major modifications include addition of piezoceramic sensors (bender elements) for measuring the maximum shear modulus and fiber Bragg grating (FBG) sensor-based local displacement transducers (FBG–LDTs) for measuring the stress–strain behavior at small strains. The modified triaxial apparatus has been used to conduct several tests on a completely decomposed granite soil from a site in Hong Kong. The stress–strain behaviors measured by the newly developed FBG–LDTs and an external displacement transducer are compared and discussed. In particular, the shear modulus values obtained using the bender elements, FBG–LTDs, and the external displacement transducer are also compared, discussed, and evaluated. The comparison and assessment show that the FBG–LTDs are more suitable for measuring the small strain behavior of soils. 相似文献
14.
Sabkha or salt flat soil is one of the most unpredictable and potentially dangerous soils in the Middle East. This soil covers a large and strategically important area of the Arabian Gulf coast, as it contains the world biggest oil reserve and a number of petrochemical plants are either have been built or are scheduled to be built in this area. The performance of shallow and deep foundations in the Eastern Province of Saudi Arabia’s sabkha soil is investigated numerically using the finite element method. The parameters used to simulate this soil in the numerical models were based on a large number of laboratory tests to determine the shear strength and stiffness parameters of the sabkha soil. In addition, the characteristics of the interface between the foundation and soil used in the numerical model were established from shear box tests that were conducted to evaluate the concrete-sabkha soil interface properties. The developed numerical model was calibrated/verified using the results of full-scale pile load testing program from an ongoing project to further enhance the accuracy of the results. A parametric study was then conducted using the verified model to establish the performance characteristics of foundations constructed in sabkha soil and provide guidelines for their design. 相似文献
15.
The scope of this paper is the analysis of full-height bridge abutments on pile foundations, installed through soft soils, with a commercially available finite element software and soil model. Well-documented centrifuge test data were used as reference. Excess pore pressures developed in the clay layer, vertical and horizontal movements of the soft clay, pile displacements and bending moments, and abutment wall bending moments were chosen for comparison, since they are the most critical parameters for observation and design. Additionally, the validity of an analytical method (SIMPLE), which was proposed to analyse the piled abutments subjected to nearby surcharge loading, is discussed. This soil-structure interaction problem has been investigated over the last three decades, using either field or centrifuge tests, accompanied by FE analyses. Special modelling techniques and advanced soil models were used in these numerical studies to establish the most representative field behaviour. However, since the codes or techniques used in these advanced FE analyses are neither very practical nor easily accessible, it is difficult to employ them consistently in design. Thus, the results of this study are intended to provide some guidelines for designers, and to bring insight about the interacting mechanisms into the design process. 相似文献
16.
Pile foundation is one of the most commonly used and suitable foundations to support transmission line structure, especially in seasonally frozen soil regions and permafrost regions. Axial compression is the controlling condition in the design of foundations for such structures as bridges and buildings, while uplift and overturning will control the design of transmission line structure foundations. This paper presents an extensive overview of previous studies including experimental (e. g., laboratory model test and full-scale field load test), analytical/theoretical (e. g., limit equilibrium and limit analysis based on plasticity)and numerical(e. g., finite difference and finite element methods). The review indicates that study on the uplift behavior of pile foundation in frozen soil is relatively limited, particularly in the case of combined effect of axial uplift and lateral loading. Interaction between pile and frozen soil and mechanism of load transfer along the pile shaft and around the pile tip still remain unclear. Therefore, this paper implements finite difference analysis within FLAC3D to investigate the behavior of pile foundation in frozen silty clay and gravelly sand under axial uplift behavior and the effect of ground condition and lateral loading on the uplift behavior. Because of the axisymmetric condition of the problem studied, only half of the model is simulated. The chosen domain of the medium is discretized into a set of quadrilateral elements and the pile is discretized by the cylinder element. The interaction between the soil and pile is considered according to interface elements. Mohr-Coulomb criterion is adopted to model the soil behavior (perfectly elastic-plastic), while the pile is simply considered as a rigid body. The soil parameters such as Young’s modulus, cohesion and internal friction angle used for numerical analyses are determined by laboratory tests and estimated according to the empirical correlations with in-situ tests. The present numerical modeling is verified with the results from field loading tests on pile foundations in Qinghai-Tibet ±550 kV transmission line project. On this basis, parametric studies are carried out to uncover the behavior of pile in frozen soil. It is observed that pullout is the dominant failure mechanism of pile and the uplift load-displacement curve clearly exhibits an asymptote, consisting of initially linear elastic, nonlinear transition, and finally linear regions. These results are consistent with the observations in a few previous studies. In addition, larger uplift capacity of pile foundation in freezing period and gravelly sand is gained (about 20%). Lateral loading increases the deflection and therefore, decreases the uplift capacity of pile foundation. For the convenience of using the results obtained in practice, the values of uplift factor for pile foundation in silty clay and gravelly sand are provided. Finally, it should be noted that the method used, and the results obtained in the current work could be useful for engineers and designers, at least providing them some qualitative evidence for pile design in seasonally frozen soil regions and permafrost regions. This is important and necessary to ensure the safety of construction in such regions. Meanwhile, numerical analyses in the current work can be a benchmark example for subsequent research studies. © 2022 Science Press (China). 相似文献
17.
Mehmet Rifat Kahyaoğlu Gökhan İmançlı Gürkan Özden Arif Ş. Kayalar 《Environmental Earth Sciences》2017,76(19):656
A catastrophic landslide following a rainy season occurred in the backyard of a school building in Söke, Turkey. The landslide caused property damage and adversely affected the present forest cover. Immediately after the landslide, double-row stabilizing piles were designed and constructed based on the findings of two-dimensional (2D) finite element (FE) analyses to take an urgent precaution. To remedy the problem, pile displacements were monitored using inclinometers, and it was observed that the measured displacements were greater than the values calculated in the design stage. Accordingly, two different three-dimensional (3D) numerical FE models were used in tandem with the inclinometer data to determine the load transfer mechanism. In the first model, numerical analyses were made to predict the pile displacements, and while the model predicted successfully the displacement of the piles constructed in the middle with reasonable accuracy, it failed for the corner piles. In the second model, the soil load transfer between piles was determined considering the sliding mass geometry, the soil arching mechanism and the group interaction between adjacent piles. The results of the second model revealed that the middle piles with large displacements transferred their loads to the corner piles with smaller displacements. The generated soil loads, perpendicular to the sliding direction, restricted pile deformations and piles with less displacement were subjected to greater loads due to the bowl-shaped landslide. A good agreement between the computed pile displacements and inclinometer data indicates that the existing soil pressure theories should be improved considering the position of the pile in the sliding mass, the depth and deformation modulus of stationary soil, the relative movement between the soil and piles and the relative movement of adjacent piles. 相似文献
18.
PCC桩加固铁路软土地基现场试验研究 总被引：4，自引：0，他引：4
铁路相对于公路对承载力和沉降控制都提出了更高的要求。现浇混凝土大直径管桩（PCC桩）技术首次在南京南站联络线铁路工程中应用,为了研究PCC桩加固铁路路基的工作特性,开展了PCC桩加固铁路软土地基的现场检测与监测试验研究。现场检测包含静载试验、低应变检测和开挖检测。现场监测内容为：桩土应力、地基和路堤水平位移、表面沉降、分层沉降、土工格栅张力、孔隙水压力等。质量检测结果表明,PCC桩施工质量良好,承载力达到铁路地基设计要求。现场监测表明,地基沉降在填土结束后3个月稳定,最大水平位移为13 mm,路基沉降稳定快,水平位移小,路堤稳定性高,能满足铁路严格控制沉降和快速施工的要求。研究成果对PCC桩复合地基加固铁路地基的设计和应用提供了依据。 相似文献
19.
Cheng Lin Caroline Bennett Jie Han Robert L. Parsons 《Computers and Geotechnics》2010,37(7-8):1008-1014
Scour is the removal of soils around pile foundations of bridges or offshore platforms, resulting in reduced capacity of the foundations in either lateral or vertical direction. A common way to analyze the scour-affected pile foundations is to remove the scoured soil layers while keeping the properties of the remaining soil unchanged. However, this approach ignores the fact that the remaining soil experiences different stress histories before and after scour, which can be expected to change the properties of the remaining soil. As a result, the resistance of the remaining soil provided to the pile foundation may be different. The present study focused on the response of laterally loaded pile foundations in sand under scour considering the stress history of the remaining sand. Relative density and coefficient of lateral earth pressure of the sand were evaluated when it changed from a normally consolidated (NC) soil to an over-consolidated (OC) soil due to scour. The relative density was then used to estimate other properties of sand, e.g., unit weight, friction angle, and modulus of subgrade reaction of the sand based on their correlation. The lateral load–deflection (p–y) curve for a pile in sand was modified and input into the computer software, LPILE Plus V 5.0, to account for the effect of the stress history induced by scour. A field test was referenced as an example to compare the calculated results from the modified p–y curves with those from the initially developed p–y curves for the tested sand. The results showed that the change in the over-consolidation ratio (OCR) resulted in the most significant effect on the lateral soil resistance among all the effects due to the changes in the properties of the remaining sand. The sand changing from an NC to OC state increased the lateral soil resistance to the pile foundation. Ignoring the stress history would result in a conservative design of laterally loaded piles under scour. 相似文献
20.
Stress-deformation data for silt and clay subgrade soils were obtained from in-situ tests and laboratory tests, for use in mechanistic models for design of pavements that will experience freezing and thawing. Plate-bearing tests were run on in-service allbituminous-concrete (ABC) pavements constructed directly on silt subgrade, and on an experimental ABC pavement constructed on clay subgrade, applying repeated loads to the pavement surfaces while the subgrade was frozen, thawing, thawed, and fully recovered. The in-service pavement had experienced several seasons of natural cyclic freezing and thawing, while the experimental pavement was artificially frozen and thawed twice. Repeated-load laboratory triaxial compression tests were performed on the same soils in the frozen and thawed states.
Analysis of deflection data from the in-situ tests showed resilient moduli of the subgrade soils up to more than 10 GPa when frozen, as low as 2 MPa during the thawing period, and up to more than 100 MPa when fully recovered. Analysis of the laboratory tests, which gave moduli comparable to the latter values, showed that resilient modulus and Poisson's ratio in the thawed and recovering conditions can be expressed as a function of the stress state, the moisture content, and the dry density. 相似文献