共查询到20条相似文献，搜索用时 953 毫秒
1.
This paper explores the effectiveness of a new approach to foundation seismic design. Instead of the present practice of over‐design, the foundations are intentionally under‐dimensioned so as to uplift and mobilize the strength of the supporting (stiff) soil, in the hope that they will thus act as a rocking–isolation mechanism, limiting the inertia transmitted to the superstructure, and guiding plastic ‘hinging’ into soil and the foundation–soil interface. An idealized simple but realistic one‐bay two‐story reinforced concrete moment resisting frame serves as an example to compare the two alternatives. The problem is analyzed employing the finite element method, taking account of material (soil and superstructure) and geometric (uplifting and P–Δ effects) nonlinearities. The response is first investigated through static pushover analysis. It is shown that the axial forces N acting on the footings and the moment to shear (M/Q) ratio fluctuate substantially during shaking, leading to significant changes in footing moment‐rotation response. The seismic performance is explored through dynamic time history analyses, using a wide range of unscaled seismic records as excitation. It is shown that although the performance of both alternatives is acceptable for moderate seismic shaking, for very strong seismic shaking exceeding the design, the performance of the rocking‐isolated system is advantageous: it survives with no damage to the columns, sustaining non‐negligible but repairable damage to its beams and non‐structural elements (infill walls, etc.). Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
2.
The effects of soil-structure interaction on the seismic response of tall (>100m) steel and reinforced concrete chimneys are described. Detailed models of a 130m high steel chimney and a 150m high reinforced concrete chimney are used as structural models. The foundations are represented as rigid blocks resting on a uniform viscoelastic soil model. Perfect bonding between the foundation and the soil is assumed. Parametric studies of the interaction effects on the magnitude and distribution of bending moments and shear forces include four soil rigidities and two seismic excitations characterized by very different frequency contents. The results obtained indicate strong interaction effects for intermediate and soft soils (Vs500 m/sec). The extent of the interaction effects are highly dependent on the characteristics of the seismic excitation. 相似文献
3.
Shaking table test and numerical simulation of a 1/2‐scale self‐centering reinforced concrete frame 
下载免费PDF全文
下载免费PDF全文 Self‐centering reinforced concrete frames are developed as an alternative of traditional seismic force‐resisting systems with better seismic performance and re‐centering capability. This paper presents an experimental and computational study on the seismic performance of self‐centering reinforced concrete frames. A 1/2‐scale model of a two‐story self‐centering reinforced concrete frame model was designed and tested on the shaking table in State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University to evaluate the seismic behavior of the structure. A structural analysis model, including detailed modeling of beam–column joints, column–base joints, and prestressed tendons, was constructed in the nonlinear dynamic modeling software OpenSEES. Agreements between test results and numerical solutions indicate that the designed reinforced concrete frame has satisfactory seismic performance and self‐centering capacity subjected to earthquakes; the self‐centering structures can undergo large rocking with minor residual displacement after the earthquake excitations; the proposed analysis procedure can be applied in simulating the seismic performance of self‐centering reinforced concrete frames. To achieve a more comprehensive evaluation on the performance of self‐centering structures, research on energy dissipation devices in the system is expected. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
4.
Giuseppe Abbiati Oreste S. Bursi Philippe Caperan Luigi Di Sarno Francisco Javier Molina Fabrizio Paolacci Pierre Pegon 《地震工程与结构动力学》2015,44(13):2221-2240
This paper deals with the seismic response assessment of an old reinforced concrete viaduct and the effectiveness of friction‐based retrofitting systems. Emphasis was laid on an old bridge, not properly designed to resist seismic action, consisting of 12 portal piers that support a 13‐span bay deck for each independent roadway. On the basis of an OpenSEES finite element frame pier model, calibrated in a previous experimental campaign with cyclic displacement on three 1:4 scale frame piers, a more complex experimental activity using hybrid simulation has been devised. The aim of the simulation was twofold: (i) to increase knowledge of non‐linear behavior of reinforced concrete frame piers with plain steel rebars and detailing dating from the late 1950s; and (ii) to study the effectiveness of sliding bearings for seismic response mitigation. Hence, to explore the performance of the as built bridge layout and also of the viaduct retrofitted with friction‐based devices, at both serviceability and ultimate limit state conditions, hybrid simulation tests were carried out. In particular, two frame piers were experimentally controlled with eight‐actuator channels in the as built case while two frame piers and eight sliding bearings were controlled with 18‐actuator channels in the isolated case. The remaining frame piers were part of numerical substructures and were updated offline to accurately track damage evolution. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
5.
Kamyar Karbasi Arani Mohammad S. Marefat Marco Di Ludovico Andrea Prota Gaetano Manfredi 《Bulletin of Earthquake Engineering》2013,11(6):2033-2053
The application of smooth (plain) bars in reinforced concrete (RC) construction has been abandoned since the 1970s; however, there are many old reinforced concrete buildings in the world whose construction is based on this old style that are now in need of structural seismic rehabilitation according to the requirements of present day seismic rehabilitation codes. The focus of this study concerns the investigation of the hysteretic cyclic response of RC columns with smooth bars. The results of six column specimens having a variety of details for overlapping splices of longitudinal bars while experiencing two different levels of axial loads under cyclic loading reversals are presented. Through analysis of test observations and the obtained experimental results, it is attempted to clarify major aspects of hysteretic response for RC columns with smooth bars, from a seismic assessment point of view. The hysteretic force–drift responses of columns are deeply investigated and a new concept explaining the flag shape form of the hysteretic response is presented. Furthermore, the rocking response of columns is predicted with a new formulation that assumes an internal compression strut inside the column body as a consequence of rocking that originated from high base rotations. Finally, a simple hysteresis rule is proposed which is the result of considering the combination of two springs in parallel to provide the total hysteretic response as the summation of rocking hysteretic and bottom anchor (smooth bar) hysteretic responses. 相似文献
6.
7.
Ho Choi Yasushi Sanada Hisatoshi Kashiwa Yasuhiro Watanabe Jafril Tanjung Huanjun Jiang 《地震工程与结构动力学》2016,45(6):999-1018
This study proposes a procedure for identifying spectral response curves for earthquake‐damaged areas in developing countries without seismic records. An earthquake‐damaged reinforced concrete building located in Padang, Indonesia was selected to illustrate the identification of the maximum seismic response during the 2009 West Sumatra earthquake. This paper summarizes the damage incurred by the building; the majority of the damage was observed in the third story in the span direction. The damage was quantitatively evaluated using the damage index R according to the Japanese guidelines for post‐earthquake damage evaluation. The damage index was also applied to the proposed spectral response identification method. The seismic performance of the building was evaluated by a nonlinear static analysis. The analytical results reproduced a drift concentration in the third story. The R‐index decreased with an increase in the story drift, which provided an estimation of the maximum response of the building during the earthquake. The estimation was verified via an earthquake response analysis of the building using ground acceleration data, which were simulated based on acceleration records of engineering bedrock that considered site amplification. The maximum response estimated by the R‐index was consistent with the maximum response obtained from the earthquake response analysis. Therefore, the proposed method enables the construction of spectral response curves by integrating the identification results for the maximum responses in a number of earthquake‐damaged buildings despite a lack of seismic records. Copyright © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd. 相似文献
8.
首先介绍了钢筋混凝土渡槽结构在地震荷载作用下的分析理论,根据这些理论建立了渡槽结构的动力有限元分析模型,分别采用干模态法、附加质量法和ALE法考虑渡槽结构液固耦合作用,通过具体的工程算例,对钢筋混凝土渡槽结构进行了不同工况下的数值模拟研究,包括混凝土非线性材料分析、渡槽结构静水与动水响应分析、渡槽结构自振特性分析和槽墩的能力曲线分析。研究表明,考虑固液耦合作用的渡槽实体有限元模型能较好地模拟渡槽结构地震反应,并得到相应的渡槽结构地震反应规律。 相似文献
9.
A new seismic energy dissipation shear wall structure is proposed in this paper. The new shear wall is one with purposely built‐in vertical slits within the wall panel, and rubber belts as seismic energy dissipation devices are installed in the vertical slits. In order to verify this concept, shaking table tests of a 10‐storey shear wall model with rubber belts filled in the vertical slits were carried out, and comparison of seismic behaviour was made between the new shear wall system and a shear wall with reinforced concrete connecting beams as energy dissipation. Furthermore, the seismic behaviour of this new shear wall is analysed by a finite element time history analysis method. The test and analysis show that the new shear wall system has a very good ability to dissipate seismic energy and is easy to use in engineering practice. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
10.
A full‐scale shake table test on a six‐story reinforced concrete wall frame structure was carried out at E‐Defense, the world's largest three‐dimensional earthquake simulation facility, in January 2006. Story collapse induced from shear failure of shear critical members (e.g., short columns and shear walls) was successfully produced in the test. Insights gained into the seismic behavior of a full‐scale specimen subjected to severe earthquake loads are presented in this paper. To reproduce the collapse process of the specimen and evaluate the ability of analytical tools to predict post‐peak behavior, numerical simulation was also conducted, modeling the seismic behavior of each member with different kinds of models, which differ primarily in their ability to simulate strength decay. Simulated results showed good agreement with the strength‐degrading features observed in post‐peak regions where shear failure of members and concentrated deformation occurred in the first story. The simulated results tended to underestimate observed values such as maximum base shear and maximum displacement. The effects of member model characteristics, torsional response, and earthquake load dimensions (i.e., three‐dimensional effects) on the collapse process of the specimen were also investigated through comprehensive dynamic analyses, which highlighted the following seismic characteristics of the full‐scale specimen: (i) a model that is incapable of simulating a specimen's strength deterioration is inadequate to simulate the post‐peak behavior of the specimen; (ii) the torsional response generated from uniaxial eccentricity in the longitudinal direction was more significant in the elastic range than in the inelastic range; and (iii) three‐dimensional earthquake loads (X–Y–Z axes) generated larger maximum displacement than any other loading cases such as two‐dimensional (X–Y or Y–Z axes) or one‐dimensional (Y axis only) excitation. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
11.
《地震工程与结构动力学》2018,47(6):1522-1543
A rational approach is presented for minimizing the dynamic response of reinforced concrete framed structures forced by a seismic base acceleration. Reference is made to EC8 regulations, but the presented approach may in principle be applied to structures ruled by any regulation code. Governing equations are set in the frequency domain (and not in the periods domain as usual) so as to enable the adoption of sound approaches for analysis and design of dynamic structures that are typical of automatics. Among these, a novel usage of the H∞‐norm concept is proposed that determines a rational design approach capable to minimize the structural response with reference to any quantity of engineering interest, eg, the overall compliance and the displacement of a specific point or the interstorey drift. A numerical investigation on a 6‐storey 3‐bay frame is performed, and relevant analysis and design results are presented in much detail to validate the theoretical framework. 相似文献
12.
The seismic vulnerability of old multi‐storey reinforced concrete (R.C.) buildings reinforced with substandard details is assessed as a function of interstorey drift demand imposed by the design earthquake while considering brittle termination of elastic response of the critical members of the structure due to a premature shear failure. Interstorey drift demand is related to column and wall translational stiffnesses which are expressed through analytical derivations in terms of the floor area ratios of gravity and lateral load bearing members in the critical floor. Interstorey drift capacity is related to the available transverse reinforcement and the axial load ratio of the vertical members. The significance of the area ratio of vertical members in the typical floor as an index of vulnerability is explored with reference to the limitations in the value of axial load ratio used in R.C. design in order to secure ductile flexural behavior, and also with reference to the stability index of gravity load bearing members. Interstorey Drift Spectra are derived for the existing R.C. buildings suitable for rapid seismic vulnerability screening but also as a guide for rehabilitation of the existing structures. Lightly reinforced or substandard reinforced concrete buildings that reportedly collapsed during previous earthquakes are used as example case studies in order to calibrate the proposed methodology. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
13.
The seismic damages commonly observed on beam–column joints of old reinforced concrete structures, built with plain bars and without proper detailing, justifies the need to further study the behaviour of this type of structures. The response of these structures when loaded cyclically, as occurs during the earthquakes, is partially controlled by the bond properties between the reinforcing bars and the surrounding concrete. This paper presents the results of an experimental campaign of unidirectional cyclic tests carried out on six full‐scale beam–column joints built with plain bars. These joint specimens are representative of existing reinforced concrete structures, that is, built without adequate reinforcement detailing for seismic demands. For comparison, an additional specimen is built with deformed bars and tested. The seven specimens are designed and detailed to allow the investigation of the influence of bond properties, lapping of the longitudinal bars in columns and beams, bent‐up bars in the beams, slab contribution and concrete strength. The lateral force–drift relationships, global dissipated energy evolution, contribution of the joint, beams and columns to the global dissipated energy, ductility, equivalent damping, final damage observed, homogenized reinforced concrete damage index, displacement components, curvature evolutions and Eurocode requirements are presented and discussed. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
14.
The opportunities provided by the use of fiber‐reinforced polymer (FRP) for the seismic retrofit of existing reinforced concrete (RC) structures were assessed on a full‐scale three‐story framed structure. The structure, designed only for gravity loads, was subjected to a bi‐directional pseudo‐dynamic (PsD) test at peak ground acceleration (PGA) equal to 0.20g at the ELSA Laboratory of the Joint Research Centre. The seismic deficiencies exhibited by the structure after the test were confirmed by post‐test assessment of structural seismic capacity performed by nonlinear static pushover analysis implemented on the lumped plasticity model of the structure. In order to allow the structure to withstand 0.30g PGA seismic actions, a retrofit using glass fiber‐reinforced polymer (GFRP) laminates was designed. The retrofit design was targeted to achieve a more ductile and energy dissipating global performance of the structure by increasing the ductility of columns and preventing brittle failure modes. Design assumptions and criteria along with nonlinear static pushover analysis to assess the overall capacity of the FRP‐retrofitted structure are presented and discussed. After the retrofit execution, a new series of PsD tests at both 0.20g and 0.30g PGA level were carried out. Theoretical predictions are compared with the main experimental outcomes to assess the effectiveness of the proposed retrofit technique and validate the adopted design procedures. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
From the beginning of the twentieth century, and due to the rapid increase of reinforced concrete (RC) usage, mixed masonry–RC buildings have emerged. In Lisbon, Portugal, old mixed masonry–RC buildings appeared between 1920 and 1960, representing the transition period between masonry and proper RC. These buildings are often integrated in blocks, and frequently share the side-walls, implying, thus, the need to assess the seismic vulnerability of building aggregates. The present paper approaches the seismic vulnerability assessment of a specific type of old mixed masonry–RC buildings in Lisbon. The study comprises the analysis of a building, both as an isolated structure and inserted in its aggregate, using two approaches: (1) linear dynamic analysis with SAP2000 and (2) nonlinear static analysis by means of 3Muri/Tremuri software. A comparison of both approaches derives a good matching between the obtained results. However, a nonlinear analysis is required to identify, in an adequate manner, the critical areas of the structure requiring strengthening. 相似文献
16.
应变率对钢筋混凝土剪力墙动态性能的影响 总被引：1，自引：0，他引：1
采用有限元软件ABAQUS中的显示动力分析模块ABAQUS/Explicit,分别对钢筋混凝土剪力墙准静态和高应变率动力荷载作用下的响应进行了数值模拟;通过比较高应变率与准静态加载下的分析结果,探讨了地震作用下应变率对钢筋混凝土剪力墙动态性能的影响。研究结果表明,受应变率效应的影响,混凝土和钢筋的动态力学行为发生了变化,动力荷载作用下的钢筋混凝土剪力墙的承载能力有一定程度的提高,故在对钢筋混凝土结构进行抗震分析时,应适当考虑应变率效应。 相似文献
17.
通过有限元方法进行非线性动力时程分析获取解析的易损性曲线,计算量大且耗时。本文采用一种简化的计算方法,即基于单自由度的等效线性化模型,对钢筋混凝土框架结构进行地震易损性分析,并研究了该方法在结构高度上的适用性。通过选用5种典型的等效线性化模型对3栋不同高度的钢筋混凝土框架结构进行增量动力分析（IDA）,得到了不同高度的结构在不同强度地震作用下结构的反应和易损性,并与OpenSees程序的计算结果进行对比,研究了等效线性化模型应用于RC框架结构易损性分析在高度上的适用性。分析结果表明:对于10层及以下的框架结构,基于单自由度的等效线性化模型在结构地震易损性分析中具有较好的适用性;对于更高层数的结构,由于高阶振型反应对整体结构反应的影响增大,基于单自由度等效线性化模型的易损性分析结果会出现明显的偏差。 相似文献
18.
19.
This study presents a nonlinear modelling technique for reinforced concrete (RC) frames retrofitted with metallic yielding devices to predict the seismic response using a computer software OpenSees. The numerical model considers the axial–flexure interaction, shear force–displacement response and the bond-slip characteristics of the frame members. The predicted hysteretic response has been compared with the results of slow-cyclic testing. The validated numerical model is then used to predict the seismic response of a five-story RC frame with soft-story. Nonlinear cyclic pushover and dynamic analyses are conducted to investigate the effectiveness of the proposed retrofitting scheme in enhancing the lateral strength and energy dissipation potential and in controlling the premature failure of the study frame. Analysis results showed significant improvement in the seismic response of RC frames with soft-story using the proposed retrofitting technique. 相似文献
20.
Longitudinal vibrations of concrete-faced rockfill dams may cause significant compressive stresses and joint openings in the slab panels. The behavior of such dams subjected to longitudinal and vertical vibrations is investigated, based on numerical simulation of the staged construction, reservoir impoundment and seismic shaking. The static analysis uses a hyperbolic model for the rockfill, whereas the seismic analysis uses a nonlinear hysteretic model which accounts for the dynamic properties. A damage plasticity model is used for the reinforced concrete and frictional contact behavior is considered at the base and vertical sides of the concrete panels. The seismic analysis takes into account the flexibility of the canyon rock and potential dynamic rockfill settlements. An existing 150 m–high dam is used to investigate the effect of longitudinal vibrations on the compressive stresses near the slab-to-slab vertical interfaces and the opening of the joints. The effect of dynamic settlements is examined and comparisons are made to the response from upstream/downstream and combined vibrations. The effectiveness of introducing 5 cm-wide cuts at selected vertical joints to reduce slab compression in existing CFRDs is demonstrated. The presented results offer useful insight into the effect of longitudinal vibrations on the seismic behavior of CFRDs. 相似文献