共查询到20条相似文献，搜索用时 31 毫秒
1.
致密砂岩储层普遍具有孔隙度低、微裂隙发育的特点,岩石内部常含有强烈的结构非均质性.致密砂岩发育的微裂隙使储层具有良好的连通性,促成高饱和气的天然气成藏.针对川西某探区须家河组高含气饱和度致密砂岩,本文选取致密砂岩岩心样本,进行了不同围压下的超声波实验测量.考虑储层完全饱气情况下的粒间孔隙、微裂隙双重孔隙结构,采用Biot-Rayleigh双重孔隙方程,构建致密砂岩岩石物理模型,进而分析了裂隙含量对纵波频散和衰减的影响.基于地震波衰减,构建了致密砂岩多尺度岩石物理图板.采用谱比法和改进频移法估算致密砂岩样本及储层衰减,对超声和地震频带下的图板进行校正.将校正后的图板应用到研究工区,选取二维测线和三维区块,进行储层孔隙度和裂隙含量的定量预测.对比实际资料进行分析,结果显示,本文预测的孔隙度和裂隙含量与三口测井的孔隙度曲线和实际产气情况基本吻合,基于孔隙-裂隙衰减岩石物理模型有效地预测了优质储层的分布区域. 相似文献
2.
《中国科学:地球科学(英文版)》2021,(6)
Wettability is an essential property of reservoirs that is of great importance for enhancing oil recovery(EOR) and oil migration. The wettability of reservoirs is generally believed to be strongly affected by mineral compositions but it is not always the case. An integrated study of petrography and wettability was carried out to determine the impact of chlorite minerals on the wettability of the sandstone reservoirs in the Upper Triassic Yanchang Formation. Chlorites are found to be commonly present in the reservoir sandstones as detrital grains, rim-shaped cements, and biotite-chloritized forms with the pore peripheries being largely coated by chlorite, which is the main mineral in direct contact with pores. At pore scale, the wetting state of chlorites can either be oil-wet or water-wet in the tight sandstone reservoirs depending on wettability alteration by oil charge. Chlorites in contact with pores occupy a large of proportions of oil-wet pore walls and are crucial for the formation of oil-wetting state of reservoir sandstones. At core scale, the contents of chlorites in direct contact with pores do not correlate well with the AmottHarvey index due to other factors such as heterogeneity, oil-bearing degrees of samples. 相似文献
3.
通过微纳米 CT、FIB 双束扫描电镜等实验手段,对吉木萨尔凹陷二叠系芦草沟组致密油储层进行详细的探讨。研究发现,吉木萨尔凹陷二叠系芦草沟组储层为中孔-低渗、特低渗、低孔特低渗储层,孔隙以微纳米级为主,类型多样,主要有粒间孔（缝）、粒间溶孔、晶间孔、层间缝及微裂隙等。不同类型储集段,储层物性和孔隙结构差异较大：上甜点区砂屑云岩孔隙以粒间孔（缝）和溶孔为主,多为微米级;下甜点区灰质粉砂岩以粒间孔和晶间孔为主,孔隙多为纳米级,0.05～0.1μm;非甜点区的灰质炭质泥岩主要发育晶间孔、层间缝和微裂隙,裂隙宽约5～6μm。 相似文献
4.
The porosity may be overestimated or underestimated when calculated from conventional logs and also underestimated when derived
from nuclear magnetic resonance (NMR) logs due to the effect of the lower hydrogen index of natural gas in gas-bearing sandstones.
Proceeding from the basic principle of NMR log and the results obtained from a physical rock volume model constructed on the
basis of interval transit time logs, a technique of calculating porosity by combining the NMR log with the conventional interval
transit time log is proposed. For wells with the NMR log acquired from the MRIL-C tool, this technique is reliable for evaluating
the effect of natural gas and obtaining accurate porosity in any borehole. In wells with NMR log acquired from the CMR-Plus
tool and with collapsed borehole, the NMR porosity should be first corrected by using the deep lateral resistivity log. Two
field examples of tight gas sandstones in the Xujiahe Formation, central Sichuan basin, Southwest China, illustrate that the
porosity calculated by using this technique matches the core analyzed results very well. Another field example of conventional
gas-bearing reservoir in the Ziniquanzi Formation, southern Junggar basin, Northwest China, verifies that this technique is
usable not only in tight gas sandstones, but also in any gas-bearing reservoirs. 相似文献
5.
Abstract The Gyeongsang Basin is a non‐marine sedimentary basin formed by extensional tectonism during the Early Cretaceous in the southeastern Korean Peninsula. The sediment fill starts with the Sindong Group distributed along the western margin of the basin. It consists of three lithostratigraphic units: the Nakdong (alluvial fan), Hasandong (fluvial) and Jinju (lacustrine) formations with decreasing age. Sindong Group sandstones are classified into four petrofacies (PF) based on their detrital composition: PF‐A consists of the lower Nakdong Formation with average Q73F12R15; PF‐B the upper Nakdong and lower Hasandong formations with Q66F15R18; PF‐C the middle Hasandong to middle Jinju formations with Q49F29R22; and PF‐D the upper Jinju Formation with Q26F34R41. The variations of detrital composition influenced the diagenetic mineral assemblage in the Sindong Group sandstones. Illite and dolomite/ankerite are important diagenetic minerals in PF‐A and PF‐B, whereas calcite and chlorite are dominant diagenetic minerals in PF‐C and PF‐D. Most of the diagenetic minerals can be divided into early and late diagenetic stages of formation. Early diagenetic calcites occur mostly in PF‐C, probably controlled by arid to semiarid climatic conditions during the sandstone deposition, no early calcite being found in PF‐A and PF‐B. Late‐stage calcites are present in all Sindong Group sandstones. The calcium ions may have been derived from shale diagenesis and dissolution of early stage calcites in the Hasandong and Jinju sandstones. Illite, the only diagenetic clay mineral in PF‐A and lower PF‐B, is inferred to be a product of kaolinite transformation during deep burial, and the former presence of kaolinite is inferred from the humid paleoclimatic conditions during the deposition of the Nakdong Formation. Chlorites in PF‐C and PF‐D are interpreted to be the products of transformation of smectitic clay or of precipitation from alkaline pore water under arid to semiarid climatic conditions. The occurrence of late‐stage diagenetic minerals largely depended on the distribution of early diagenetic minerals, which was controlled initially by the sediment composition and paleoclimate. 相似文献
6.
Sizeable amounts of connected microporosity with various origins can have a profound effect on important petrophysical properties of a porous medium such as (absolute/relative) permeability and capillary pressure relationships. We construct pore-throat networks that incorporate both intergranular porosity and microporosity. The latter originates from two separate mechanisms: partial dissolution of grains and pore fillings (e.g. clay). We then use the reconstructed network models to estimate the medium flow properties. In this work, we develop unique network construction algorithms and simulate capillary pressure–saturation and relative permeability–saturation curves for cases with inhomogeneous distributions of pores and micropores. Furthermore, we provide a modeling framework for variable amounts of cement and connectivity of the intergranular porosity and quantifying the conditions under which microporosity dominates transport properties. In the extreme case of a disconnected inter-granular network due to cementation a range of saturations within which neither fluid phase is capable of flowing emerges. To our knowledge, this is the first flexible pore scale model, from first principles, to successfully approach this behavior observed in tight reservoirs. 相似文献
7.
A discussion on the boundary between diagenesis and metamorphism with reference to zeolite facies 总被引：1，自引：0，他引：1
Abstract A Triassic formation in the Turpan-Hami and Ordos basin of China gives two typical examples of occurrence of laumontite belonging to diagenetic facies. Sandstones of the Upper Triassic Yanchang Formation in the eastern sector of the Ordos basin are formed at the mature stage of mesodiagenesis at temperatures in the range of 71-120°C, while the temperatures of the oil-bearing beds Chang-6 and Chang-7 where laumontite is present are about 81-88°C. The laumontite-bearing beds of the Middle Triassic in the Hami depression are presently at the supermature stage of organic matter, the corresponding diagenetic temperature being about 140 °C. The term zeolite facies should be rejected, and the features of metamorphic stage should be clearly denned, such as closely packed grains, absence of pores and cements, and characteristic mineral assemblages including sericite, epidote, muscovite, illite (2M1 ), chlorite (IIb, β= 97°), dickite, pyrophyllite, graphite, chlorozeolite formed at temperatures of 200°C and Ro values of 2.5%; the stage is also characterized by schistosity and illite crystallinity of IC = 0.42°Δ 2θ. The anchimetamorphic zone is characterized by some characteristic minerals such as paragonite, rectorite, albite, laumontite, illite (1M), chlorite (Ib, P = 90°+ IIb, β= 97°) formed at temperatures of 130-200°C and Ro values of 1.3-2.5% as well as other quantitative parameters of organic matter. 相似文献
8.
五峰-龙马溪组页岩是目前国内页岩气勘探的首选层位,而其地震岩石物理特征是利用地震方法进行"甜点"预测的重要基础之一,但对五峰-龙马溪组页岩地震弹性特征变化规律的研究并未考虑沉积、成岩过程的影响,致使相应的规律性认识缺乏地质意义.在对五峰-龙马溪组页岩样品系统声学测量基础上,分析了页岩样品地震弹性性质的变化规律.利用X射线衍射分析、扫描电镜（SEM）、阴极发光（CL）与能谱分析确定了五峰-龙马溪组页岩在不同沉积环境下的成岩过程,并讨论了成岩过程与地震弹性性质变化规律的因果关系.研究结果表明,页岩中有机质（TOC）受高热演化程度的影响,其密度通常高于1.4 g·cm-3,并接近于有机碳密度上限1.6 g·cm-3（石墨密度）.五峰-龙马溪组页岩地震弹性性质变化规律整体受沉积环境控制,沉积环境的差异形成不同的成岩过程,致使地震弹性特征也表现出不同的变化规律.表现在五峰-龙马溪页岩样品动态岩石物理特征主要受岩石结构控制（支撑颗粒弹性性质）,而孔隙度、TOC含量以及孔隙形状则为对地震弹性特征影响的次一级因素.五峰-龙马溪组页岩上段为浅水陆棚相,机械压实与化学压实（硅质胶结）为先后两个过程,造成样品表现出高的速度-孔隙度变化率、高速度比（泊松比）、高各向异性以及低TOC含量的特征.五峰-龙马溪组页岩下段为深水陆棚相,机械压实过程中同时伴有生物成因的硅质胶结,造成岩石样品表现出较高TOC含量与孔隙度、各向异性较弱以及较小的速度-孔隙度变化率.研究结果可为五峰-龙马溪页气储层的测井解释和地震"甜点"预测提供依据. 相似文献
9.
10.
Augustus K. Armstrong Jacques R. Renault Robert L. Oscarson 《Journal of Volcanology and Geothermal Research》1995,67(1-3)
Continental Scientific Drilling Program (CSDP) drill hole VC-2B [total depth 1761.7 m (5780 ft); maximum temperature 295 °C] was continuously cored through the Sulphur Springs hydrothermal system in the western ring-fracture zone of the 1.14 Ma Valles caldera. Among other units, the hole penetrated 760.2 m (2494.1 ft) of Paleozoic carbonate and siliciclastic strata underlying caldera fill and precaldera volcanic and epiclastic rocks. Comparison of the VC-2B Paleozoic rocks with corresponding lithologies within and around the 32.1 Ma Socorro caldera, 192 km ( 119 miles) to the south-southwest, provides insight into the variability of alteration responses to similar caldera-related hydrothermal regimes.The Pennsylvanian Madera Limestone and Sandia Formation from VC-2B preserve many of the sedimentological and diagenetic features observed in these units on a regional basis and where unaffected by high temperatures or hydrothermal activity. Micrites in these formations in VC-2B are generally altered and mineralized only where fractured or brecciated, that is, where hydrothermal solutions could invade carbonate rocks which were otherwise essentially impermeable. Alteration intensity (and correspondingly inferred paleopermeability) is only slightly higher in carbonate packstones and grainstones, low to intermediate in siltstones and claystones, and high in poorly cemented sandstones. Hydrothermal fracture-filling phases in these rocks comprise sericite (and phengite), chlorite, allanite, apatite, an unidentified zeolite and sphene in various combinations, locally with sphalerite, galena, pyrite and chalcopyrite. Terrigenous feldspars and clays are commonly altered to chlorite and seriate, and euhedral anhydrite “porphyroblasts” with minor chlorite occur in Sandia Formation siltstone. Fossils are typically unaltered, but the walls of some colonial bryozoans in the Madera Limestone are altered to the assemblage chlorite-sericite-epidote-allanite. La, Ce and Nd are present in an unidentified hydrothermal mineral occurring throughout much of the VC-2B Pennsylvanian sequence.Carboniferous carbonate and siliciclastic formations within and around the Socorro caldera show a similar style of alteration and mineralization to their Valles caldera counterparts, but by contrast locally host commercial, caldera-related, base-metal sulfide deposits. As in the Valles rocks, mineralization and alteration in those of the Socorro caldera were strongly controlled by porosity. Unless disrupted by fractures, breccias, or karst cavities ( not identified in Valles caldera drill holes), the rocks remained relatively unaltered. Where these features allowed ingress of mineralizing hydrothermal solutions, base-metal sulfides and rare-earth-element-bearing minerals were precipitated. 相似文献
11.
相对于常规砂岩,致密砂岩在岩石物理性质、力学性质等方面具有明显差异,并呈现出很强的非均质性.岩石物理模型能将储层参数与地震特性信息联系起来,因此可以作为致密砂岩储层参数与地震特性信息转换的桥梁.常规的岩石物理模型通常只考虑单一因素(例如非均匀性,单一孔隙,单一尺度等),建立的岩石物理模板并不适用于致密砂岩.本文针对高饱和气、微裂隙发育、非均质性强的致密砂岩储层,利用Voigt-Reuss-Hill模型计算混合矿物的弹性模量,采用微分等效介质(DEM)模型描述含裂隙、孔隙岩石的骨架弹性模量,基于Biot-Rayleigh波动方程构建了岩石物理弹性模板,给出了致密砂岩储层弹性参数与物性的关系.基于测井数据和实验数据对岩石物理弹性模板进行校正,并将校正后的岩石物理弹性模板结合叠前地震资料应用于川西地区储层孔隙度与裂隙含量预测.结果显示,反演裂隙含量、孔隙度与储层试气报告、测井孔隙度基本吻合,表明该模板能够较合理地应用于致密砂岩储层孔隙度及裂隙含量解释中. 相似文献
12.
Lithological and geochemical features of platformal carbonates record the signatures of the global climates and the regional environmental settings and also reconstruct the diagenetic history and porosity evolution, which are essential to evaluate the potential of hydrocarbon reservoirs. This study investigates the platformal carbonates of the Oligo‐Miocene Krunji Formation of North East Java Basin, which are potentially significant hydrocarbon reservoirs. The carbonate sequence in a 283 m thick section at Kranji in East Java is subdivided into three lithological units: limestone unit 1, dolostone unit 2, and limestone unit 3, in ascending order. The strontium‐isotope ratios of well‐preserved calcite samples indicate the depositional period from Chattian (late Oligocene) to Burdigalian (early Miocene), which is consistent with ages of the foraminifer assemblages. Unit 1 consists of low‐porosity limestone, in which two horizons of subaerial exposure are recognized by the occurrence of red‐colored matrix and lower δ13C values. Unit 2 consists of dolomitic rock and exhibits coarse‐grained calcitic grains and cross‐stratified structure. Considering that this unit has been subject to dolomitization, the sediment of unit 2 was initially permeable and was likely deposited in a shoal setting. The overlying unit 3 of Aquitanian–Burdigalian age is characterized by a highly granular texture. High porosity and uniformly low δ13C and δ18O values indicate that Unit 3 was subjected to more intense meteoric diagenesis than the Chattian unit 1. This was likely a consequence of the Antarctic ice‐sheet expansion during the Oligocene/Miocene transition, which amplified sea level change. The unit 2 dolomite has high δ13C and δ18O values and a high 87Sr/86Sr ratio which resulted from the reflux of seawater into permeable the sediment body in middle‐late Miocene (Burdigalian Tortonian) following the deposition of unit 3. The porosity and permeability of the Kujung Formation were initially controlled by sedimentological processes, but largely modified by later diagenetic processes. 相似文献
13.
对于富含有机质的页岩储层来说,孔隙度是评价油气储量的关键参数之一,有机孔隙的存在又对岩石孔隙空间具有重要贡献,因此,研究页岩储层有机孔隙空间是有必要的。本文结合氩离子抛光扫描电镜（SEM）资料和图像分割技术,以川南永川区块YY2井龙马溪组页岩储层为例,对纳米有机孔隙的形态特征和有机孔隙度进行分析研究,研究表明:YY2井龙马溪组有机孔隙较发育,SEM图像中有机孔隙直径差异很大,对龙马溪组6块岩样的SEM图像进行处理,得到的有机质面孔率在0.97％～8.90％之间,个别样品孔径较小,面孔率在1％以下。利用面孔率和有机质含量计算有机孔隙度,计算得到的有机孔隙度在0.12％～0.75％范围内,均值为0.39％,占据岩石孔隙度的10.66％。 相似文献
14.
The Dongying Basin, Huimin Basin, and Zhanhua Basin constitute the Jiyang Depression in Shandong Province. They are major oil and gas exploring districts within the depression. Through reconstruc-tions of the paleotemperature of the three basins facilitated with the chlorite geothermometry, the thermal history of the Paleogene prototype basin in Jiyang Depression and its geologic significance were explored. This study reveals that the Si4 component in chlorites reduces gradually as its buried depth increases, while the AlIV component increases accordingly. The chlorite type changes from sili-con-rich diabantite to silicon-poor ferroamesite and prochlorite. The prochlorite in this district only appears in the deep buried depth, high temperature, and relatively old stratigraphies; while the diaban-tite appears in the shallower buried, low temperature, and newly formed strata; the ferroamesite exists in the conditions between prochlorite and diabantite formation. The diagenetic temperatures of the chlorites in these Paleogene basins are 171―238℃ for the Dongying Basin, 160―202℃ for the Huimin Basin, and 135―180℃ for the Zhanhua Basin. The differences of the chlorite diagenetic temperatures in the three basins were controlled by the duration time of the structural depressing processes. Higher temperature indicates longer depression time. The relationship between the chlorite diagenetic temperature and its buried depth indicates that the average paleogeothermal gradient is about 38.3℃ /km in the Paleogene prototype basin of Jiyang Depression. It was higher than the present geothermal gradient (29―30℃/km). This phenomenon was attributed to the evolution of the structural dynamics in the depression basin. 相似文献
15.
The shales of the Qiongzhusi Formation and Wufeng–Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1) the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2) the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3) organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation (SCA), the differential effective medium (DEM), and Gassmann’s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well. 相似文献
16.
Jinglan Luo S. Morad Xiaoli Zhang Shike Yan Fuli Wu Yuhong Li Junmin Xue 《中国科学D辑(英文版)》2002,45(7):616-634
The reservoir quality of Jurassic and Triassic fluvial and lacustrine-deltaic sandstones of the Yanchang Oil Field in the
Ordos Basin is strongly influenced by the burial history and facies-related diagenetic events. The fluvial sandstones have
a higher average porosity (14.8%) and a higher permeability (12.7 × 10−3 μm2) than those of the deltaic sandstones (9.8% and 5.8 ×10−3) μm2, respectively). The burial compaction, which resulted in 15% and 20% porosity loss for Jurassic and Triassic sandstones,
respectively, is the main factor causing the loss of porosity both for the Jurassic and Triassic sandstones. Among the cements,
carbonate is the main one that reduced the reservoir quality of the sandstones. The organic acidic fluid derived from organic
matter in the source rocks, the inorganic fluid from rock-water reaction during the late diagenesis, and meteoric waters during
the epidiagenesis resulted in the formation of dissolution porosity, which is the main reason for the enhancement of reservoir-quality. 相似文献
17.
致密砂岩普遍具有低孔、低渗及微裂缝发育的地质特征,并且呈现出很强的非均匀性.致密砂岩储层与常规砂岩储层比较,具有明显的岩石物理性质、渗流力学性质方面的差异.致密砂岩内部的非均匀性对弹性波频散、衰减有显著影响,其中包括孔隙结构的非均匀性,即岩石内部孔隙参数的不均一性,以及孔隙内部不相混溶流体的非均匀分布;此外,非均匀性的尺度也决定了波出现显著频散与衰减的频段.综合考虑致密砂岩孔隙结构非均匀性及流体斑块状饱和的非均匀性,本文采用双双重孔隙介质结构模拟了致密砂岩的弹性波响应,分析了同时具备两类非均质性岩石中的波传播特征.调查分析了两组分别来自中国鄂尔多斯盆地苏里格气田及四川盆地广安气田的不同类型致密砂岩储层的岩芯超声波实验数据,给出了岩石样本的弹性波速度频散与衰减曲线.结果显示理论模型预测结果与完全饱和、部分饱和岩石的实验数据吻合良好.对两个地区致密砂岩岩芯数据进行对比分析,苏里格致密砂岩样本总体上比广安致密砂岩渗透率高,在各孔隙度范围内,特征模拟显示苏里格样本的裂隙尺寸明显大于广安样本.广安致密砂岩在低孔隙度范围内发育了更多、更小的颗粒裂隙/接触.致密砂岩的速度频散与衰减结果受流体黏度、晶体破裂及流体斑块状饱和的共同影响.此外,孔隙度越大,部分饱和岩石中斑块状饱和机制对总衰减的贡献越低,与之相对,结构非均质性所占的比重则有所增强. 相似文献
18.
Permeability, storage capacity and volumetric strain were measured in situ during deformation of hot-pressed calcite aggregates containing 10, 20, and 30 wt% quartz. Both isostatic and conventional
triaxial loading conditions were used. The tests were performed at confining pressure of 300 MPa, pore pressures between 50
to 290 MPa, temperatures from 673 to 873 K and strain rates of 3 × 10−5 s−1. Argon gas was used as the pore fluid. The initial porosities of the starting samples varied from 5% to 9%, with higher porosity
correlated to higher quartz content. Microstructural observations after the experiment indicate two kinds of pores are present:
1) Angular, crack-like pores along boundaries between quartz grains or between quartz and calcite grains and 2) equant and
tubular voids within the calcite matrix. Under isostatic loading conditions, the compaction rate covaries with porosity and
increases with increasing effective pressure. Most of the permeability reduction induced during compaction is irreversible
and probably owes to plastic processes. As has been found in previous studies on hot-pressed calcite aggregates, permeability,
k, is nonlinearly related to porosity, ϕ. Over small changes in porosity, the two parameters are approximately related as k ∝ ϕn. The exponent n strongly increases as porosity decreases to a finite value (from about 4 to 6% depending on quartz content), suggesting a
porosity percolation threshold. When subjected to triaxial deformation, the calcite-quartz aggregates exhibit shear-enhanced
compaction, but permeability does not decrease as rapidly as it does under isostatic conditions. During triaxial compaction
the exponent n only varies between 2 and 3. Non-isostatic deformation seems to reduce the percolation threshold, and, in fact, enhances
the permeability relative to that at the same porosity during isostatic compaction. Our data provide constraints on the governing
parameters of the compaction theory which describes fluid flow through a viscous matrix, and may have important implications
for expulsion of sedimentary fluids, for fluid flow during deformation and metamorphism, and melt extraction from partially
molten rocks. 相似文献
19.
Matěj Machek Zuzana Roxerová Vojtěch Janoušek Martin Staněk Eduard Petrovský Miloš René 《Studia Geophysica et Geodaetica》2013,57(4):710-740
The hydrothermal alteration of granites has large influence on their petrophysical properties. To reveal the impact of alteration on magnetic and porosity properties of granites we have conducted a complex study of effects of two largely independent alteration processes, related to chemically different fluids, in granites of the Vysoký Kámen stock (the Krudum granite body, Czech Republic). It includes the whole-rock geochemical, magnetic and pore-space characterization. The alkali feldspathization resulted in decomposition of Li-mica, quartz removal, depletion in mafic cations and growth of new alkali feldspars (albite, K-feldspar), decreasing the overall magnetic susceptibility and disrupting the pore space by its discontinuation. The preservation of the orientation of the principal susceptibility axes is likely related to insignificant influence of the feldspathization process on the paramagnetic and diamagnetic phases orientation acquired during the magma emplacement. The greisenization, on the other hand had considerably more significant effects on microstructure and physical properties of the granite. The microstructure was modified by the growth of large amounts of new phases (Li-mica, quartz and topaz). This changed the mineral density of the rock, the porosity, size and character of pores to larger, flatter and probably more connected. This led also to the complete reworking of the original anisotropy of magnetic susceptibility during the greisenization. 相似文献
20.
Tight oil siltstones are rocks with complex structure at pore scale and are characterized by low porosity and low permeability at macroscale. The production of tight oil siltstone reservoirs can be increased by hydraulic fracturing. For optimal fracking results, it is desirable to map the ability to fracture based on seismic data prior to fracturing. Brittleness is currently thought to be a key parameter for evaluating the ability to fracture. To link seismic information to the brittleness distribution, a rock physics model is required. Currently, there exists no commonly accepted rock physics model for tight oil siltstones. Based on the observed correlation between porosity and mineral composition and known microstructure of tight oil siltstone in Daqing oilfield of Songliao basin, we develop a rock physics model by combining the Voigt–Reuss–Hill average, self-consistent approximation and differential effective medium theory. This rock physics model allows us to explore the dependence of the brittleness on porosity, mineral composition, microcrack volume fraction and microcrack aspect ratio. The results show that, as quartz content increases and feldspar content decreases, Young's modulus tends to increase and Poisson ratio decreases. This is taken as a signature of higher brittleness. Using well log data and seismic inversion results, we demonstrate the versatility of the rock physics template for brittleness prediction. 相似文献