共查询到20条相似文献，搜索用时 31 毫秒
1.
Unsteady forces, torques and bending moments were predicted for a model podded propulsor unit at various azimuth angles. Predictions in time history include propeller shaft thrust, propulsor unit thrust, normal forces to the propeller shaft bearing, total forces acting on the propulsor unit, propeller shaft torque, blade spindle torque, in-plane and out-of-plane bending moments, and propulsor unit stock shaft torque and bending moments. Analysis was performed for averaged forces and their fluctuations as well. A time-domain unsteady multi-body panel method code, PROPELLA, was further developed for this prediction work. Predictions were compared with a set of time averaged in-house experimental data for a puller-type podded propulsor configuration in the first quadrant operation. Unsteady fluctuations of forces were predicted numerically. Analysis was made for the bending moment on propeller blades, shaft and the propulsor unit stock shaft for azimuth angles from 0° to 45°. It indicates that the magnitude and fluctuation of the forces are significant and they are essential for structural strength and design optimization. The predicted bending moment and global forces on the propulsor unit provide some useful data for ship maneuvering motion and simulation in off-design conditions. 相似文献
2.
During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded propulsor, affecting the surrounding flow field and aggravating the non-uniformity of the propeller wake. A pulsating load is formed on the propeller, which affects the hydrodynamic performance of the podded propulsor. To study the changes in the propeller hydrodynamic performance during the ice podded propulsor interaction, the overlapping grid technique is used to simulate the unsteady hydrodynamic performance of the podded propulsor at different propeller rotation angles and different ice block sizes. Hence, the hydrodynamic blade behavior during propeller rotation under the interaction between the ice and podded propulsor is discussed. The unsteady propeller loads and surrounding flow fields obtained for ice blocks with different sizes interacting with the podded propulsor are analyzed in detail. The variation in the hydrodynamic performance during the circular motion of a propeller and the influence of ice size variation on the propeller thrust and torque are determined. The calculation results have certain reference significance for experiment-based research, theoretical calculations and numerical simulation concerning ice podded propulsor interaction. 相似文献
3.
In practical maritime conditions, ship hulls experience heave motion due to the action of waves, which can further drive the ship’s propellers to oscillate relative to the surrounding water. In order to investigate the motion of a propeller working behind a surface vessel sailing in waves, a numerical simulation is conducted on a propeller impacted by heave motion in cavitating flow using the Reynolds-averaged Navier-Stokes (RANS) method. The coupling of the propeller’s rotation and translation is fulfilled using equations of motion defined for this purpose. The heave motion is simplified as a periodic motion based on a sinusoidal function. The numerical transmission of information from the unsteady flow field is achieved using the overset grid approach. In this manner, the unsteady thrust coefficient and torque coefficient of propellers in different periods of heave motion are analyzed. A comparative study is implemented on the unsteady cavitation performance and wake characteristics of propeller. With the propeller’s heave motion, the flow field non-uniformity constantly changes the load on the propeller during each revolution period and each heaving period, the propeller load and the wake field are closely related to the variation of heave motion period. The results obtained from the numerical simulation are expected to serve as a useful theoretical reference for the numerical analysis of a propeller in a heave motion. 相似文献
4.
Accurate propeller shaft speed controllers can be designed by using nonlinear control theory and feedback from the axial water velocity in the propeller disc. In this paper, an output feedback controller is derived, reconstructing the axial flow velocity from vehicle speed measurements, using a three-state model of propeller shaft speed, forward (surge) speed of the vehicle, and the axial flow velocity. Lyapunov stability theory is used to prove that a nonlinear observer combined with an output feedback integral controller provide exponential stability. The output feedback controller compensates for variations in thrust due to time variations in advance speed. This is a major problem when applying conventional vehicle-propeller control systems. The proposed controller is simulated for an underwater vehicle equipped with a single propeller. The simulations demonstrate that the axial water velocity can be estimated with good accuracy. In addition, the output feedback integral controller shows superior performance and robustness compared to a conventional shaft speed controller 相似文献
5.
The thruster is the crucial factor of an underwater vehicle system, because it is the lowest layer in the control loop of the system. In this paper, we propose an accurate and practical thrust modeling for underwater vehicles which considers the effects of ambient flow velocity and angle. In this model, the axial flow velocity of the thruster, which is non-measurable, is represented by ambient flow velocity and propeller shaft velocity. Hence, contrary to previous models, the proposed model is practical since it uses only measurable states. Next, the whole thrust map is divided into three states according to the state of ambient flow and propeller shaft velocity, and one of the borders of the states is defined as critical advance ratio (CAR). This classification explains the physical phenomenon of conventional experimental thrust maps. In addition, the effect of the incoming angle of ambient flow is analyzed, and Critical Incoming Angle (CIA) is also defined to describe the thrust force states. The proposed model is evaluated by comparing experimental data with numerical model simulation data, and it accurately covers overall flow conditions within ±2 N force error. The comparison results show that the new model's matching performance is significantly better than conventional models'. 相似文献
6.
导管推进器是一种普遍应用于无人遥控潜水器（ROV）等潜器中的特种推进器。在桨叶与导管之间的梢隙中存在非常复杂的流动，本研究基于大涡模拟（LES）对导管推进器的梢隙流动进行了数值模拟分析。通过对时间步长的收敛性研究，建立两套基于不同网格类型的计算模型。将计算结果与试验进行对比，比较两种不同类型网格模拟结果的差异发现，切割体网格能够更好地捕捉到泄涡的细节，并结合梢隙流场的原理分析泄涡发展的过程，梢隙涡的驱动力是吸力面与压力面之间的压差。此外，随着进速系数增大，梢隙周向的涡管轴向分布范围减小，主泄涡发生位置延后，泄出涡的长度和数量都有所减少。 相似文献
7.
Bu-Geun Paik Ki-Sup Kim Jong-Woo Ahn Kyung-Rae Kim Sang-Uk Lee 《Ocean Engineering》2011,38(13):1495-1502
Rudders of large container ships are easily affected by cavitation, which is well known to be induced by significant axial flows behind a propeller and discontinuities in the rudder. Among several methods to prevent or reduce the cavitation erosion occurred in the rudder, painting is gaining a lot of attention because it can be employed easily and cheaply. To conduct erosion tests properly, the simulation of heavily erosive cavitation is necessary. This can be generated using an inclined propeller dynamometer in the medium-size cavitation tunnel of MOERI (Maritime & Ocean Engineering Research Institute). The inclined shaft of the propeller creates strong cavitation, which occurs around the root of the propeller blade. This cavitation creates impacts through the collapsing process that are very severe, and are useful for realistic and efficient cavitation erosion tests. In the present study, the newly developed cavitation erosion test method is successfully employed to evaluate marine coatings that is mainly composed of epoxy elastomer or silicone polymer material. Silicone polymer-type paint B was found to have three times larger endurance than epoxy elastomer-type paint A. 相似文献
8.
当船舶在冰区航行时,螺旋桨会与海冰相互碰撞并导致桨叶的变形和损坏,进而影响船舶的航行安全。为研究海冰与螺旋桨的相互作用过程,采用离散元(DEM)—有限元(FEM)耦合方法构建海冰—螺旋桨切削模型。海冰和螺旋桨模型分别采用具有黏结—破碎特性的球体离散单元和8节点六面体有限单元构造。基于该DEM-FEM耦合模型讨论了不同切削深度下,螺旋桨所承受冰载荷的特点和规律;最后,研究了螺旋桨切削海冰过程中进速系数、推力系数、扭矩系数之间的对应关系,并讨论了海冰—螺旋桨相互作用过程中冰压力、Mises应力和变形的分布特点。以上研究可为寒区船舶安全航行和螺旋桨设计提供有益的参考。 相似文献
9.
可回转桨的水动力模型与操纵性能 总被引：1，自引：0，他引：1
可回转桨在船后形成复杂的流场,难以建立准确的数学模型,因此对其推力进行理论计算十分困难。本文根据实验数据,用神经网络辨识方法建立了船后可回转桨的水动力模型,并在此基础上研究了可回转桨的操纵性能。仿真结果表明：用神经网络系统辨识方法所建立的数学模型能够真实地反映可回转浆的推力特性。本文为研究复杂的水动力问题提供了一种行之有效的方法。 相似文献
10.
Improvements of estimation accuracy on propeller torque fluctuations in waves will contribute assessments on safe operation of a ship main engine as in adverse sea condition. The propeller torque and thrust in waves can be estimated by propeller effective inflow velocity in waves, using the propeller open-water characteristics. Fluctuation components in the mathematical model of the propeller effective inflow velocity in waves can be composed of two components, respectively caused by ship surge motion and wave orbital motion at propeller position. In this study, an experimental method by the model test to directly identify the characteristics of the component by the wave orbital motion is newly proposed. Furthermore, the free-running model test in regular waves, using a simulator of the marine diesel engine which manages the shaft speed of the motor on a ship model as behaving the actual diesel engine, is carried out to obtain realistic torque fluctuations for comparisons of the estimated results applying the proposed identification method. Through comparisons of estimated fluctuations with the measured results, the proposed approach for the component of the inflow velocity due to wave orbital motion is successfully validated. 相似文献
11.
The sensitivity of the hydrofoil take-off speed to changes in foil size and angle has not been well documented. This paper first presents the verification of the UNO-HYF1 with published performance data. Following the satisfactory validation, the results are presented in hydrofoil take-off to show the change with speed when the foil area, foil angle and propeller shaft angle are changed. The calculations indicate that varying the hydrofoil area has the largest impact on hydrofoil take-off speed. 相似文献
12.
An integral panel method (IPM) that treats the different components of multi-component propulsors as a whole is presented for efficient propulsor performance analysis. The IPM requires consider only one blade of the propeller in the performance analysis, which significantly reduces the number of computation grid. The control equations of the IPM are derived in detail for podded propulsors, contra-rotating propellers and hybrid contra-rotating shaft pod propulsors, and based on these derivations, a general control equation for multi-component propulsors with propeller is derived. Comparison between numerical results and experimental data show that the IPM provides good accuracy for the performance analysis of multi-component propulsors with propeller. In addition, the error sources of IPM are discussed, and the reasonableness of these errors is evaluated. 相似文献
13.
In this paper, the flow-induced vibrations of marine propellers in cyclic inflows are investigated both experimentally and numerically. A Laser-Doppler velocimetry (LDV) system is used to measure the axial flow velocity distributions produced by the seven-cycle wake screen in the water tunnel. A customized underwater slip ring and a single axis accelerometer sealed by silicon sealant are employed to measure the acceleration responses of rotating propeller blade. Numerical simulations of pressure fluctuations on the blades are performed using large eddy simulation (LES), while the forced vibrations of the propeller blades are obtained by a combined finite element and boundary element method. Experimental and numerical results are presented for two model propellers with the same geometries and different flexible properties, which show that the propeller blade vibrates at a frequency which is seven times as large as the axial passing frequency (APF) in the seven-cycle inflow. Moreover, the propeller blades are observed to resonance when the 7 APF excitation frequency is equal to the fundamental frequency of the propellers. The results indicate that both the inflow feature and the modal characteristic of blades contribute to flow-induced vibrations of elastic propellers. 相似文献
14.
基于重叠网格模型,通过非定常RANS数值模拟与结果分析,研究了块状冰的尺寸、轴向运动和冰桨位置对螺旋桨水动力性能的影响。选用切割体网格绘制整体静止计算域的背景网格,之后结合棱柱层网格绘制螺旋桨子计算域和冰块子计算域的重叠网格,不同的计算域之间通过两者的重叠区域进行数据传递和插值。计算结果显示,当冰块固定在桨前时,螺旋桨产生的非定常推力和扭矩均以叶频为基频进行周期性变化,而且两者的时间平均值和振幅主要受冰块在螺旋桨盘面内的轴向投影面积、冰桨轴向位置和冰桨水平位置的影响;当冰块在桨前沿轴向匀速靠近螺旋桨时,冰桨轴向距离逐渐变小,冰桨周向相对位置发生周期性的变化,使得推力和扭矩两者均以叶频振荡,而且两者的时间平均值和振幅均随着冰桨轴向距离减小而增加。 相似文献
15.
导管桨的尾流不稳定性在其性能评价中非常重要,不但是其能否提供稳定推力的保证,而且也与螺旋桨的尾流噪声直接相关。为了改善导管桨的尾流,提高尾流稳定性,并优化导管桨的流场脉动,根据座头鲸鳍肢前缘结节的仿生原理,对导管桨叶片的导边进行改进,提出了两种仿生桨型,采用IDDES湍流模型对低进速系数下常规导管桨和仿生叶片导管桨进行数值模拟,探究叶片构型对导管桨性能和尾流不稳定性的影响。计算结果表明,前缘结节可以有效降低叶片受力波动的幅值和叶片所受合力的主频域峰值,具有较大结节的叶片对导管桨尾流有明显的优化作用,在尾流远场中扩大了流动稳定区,延后了尾流处涡破碎的发生,改善了能量谱密度的频域分布。进一步,大前缘结节叶片导管桨应用在低速工况下时,可以大量减少尾流泄涡区域的二次涡产生,这是由于前缘结节提升了相邻涡互感的强度,使得尾流更加稳定,而小结节叶片仿生桨型对导管桨尾流则无明显优化作用。研究方法和成果可为螺旋桨尤其是导管桨尾流不稳定性研究提供参考,不仅验证了前缘结节在导管桨叶片应用的合理性,而且揭示了其优化尾流稳定性的机理。 相似文献
16.
The existing propulsor that can perform both propulsion and maneuvering along axis of rotation is propeller/rotor for a helicopter. Helicopter propellers when maneuvering increase or decrease their blades’ pitch cyclically to create imbalanced thrust and hence maneuvering force/torque. A “maneuverable propeller” was developed and its performance on both maneuvering and propulsion is assessed. The “maneuverable propeller” is an alternative of the existing helicopter rotors. The novelty of this propulsor is that the imbalanced thrust force/torque is created by cyclically increasing or decreasing the angular speed of their blades relatively to the hubs/shafts, to provide the desired maneuvering torque. This maneuverable propeller is hence defined as the Cyclic Blade Variable Rotational Speed Propeller (CBVRP). One of the best advantages is that the maneuvering torque created by the “maneuverable propeller” is much higher, about 5 times of the shaft torque of the same propeller at thrust only mode. The “maneuverable propeller” has wide applications for both surface ships and underwater vehicles that require high maneuverability for cruising inside the narrow passage. 相似文献
17.
Günter Collatz 《Ocean Engineering》1983,10(4):213-226
This article deals with model test results of a container vessel having a low block coefficient. It was fitted with an asymmetric afterbody in order to improve the water flow to the propeller and thus the propulsion. Power savings of more than 7% were attained, an interesting percentage under economic aspects. Calculations based on the wake distribution measurements showed that the variations of forces and moments at the propeller shaft were markedly below the permissible limits and that the pressure fluctuations on the shell could be reduced considerably. 相似文献
18.
针对十万吨级深远海养殖工船在波浪中的阻力和运动响应开展了船模试验与模拟计算,并对其最小推进功率进行了校核。以试验流体力学（EFD）模型试验与模型尺度计算流体力学（CFD）模拟计算的结果进行对比作为方法验证,将实尺度CFD模拟计算的结果直接用于最小推进功率的校核。结果显示,EFD模型试验结果与模型尺度CFD计算结果误差在10%左右,计算精度满足工程要求。在规定的恶劣海况下该船型波浪增阻占总阻力的比例最高可达56.3%,螺旋桨转矩可达最大转矩的63.9%。等级2简化评估法得到的最小推进功率为等级1线评估法给出的最小功率线值的58.9%。研究表明实尺度CFD模拟计算可直接用于船舶最小推进功率的校核,此深远海养殖工船使用等级2简化评估方法进行校核更容易满足规范要求,其最小推进功率应不小于6 833 kW。 相似文献
19.
A hybrid underwater glider Petrel-II has been developed and field tested. It is equipped with an active buoyancy unit and a compact propeller unit. Its working modes have been expanded to buoyancy driven gliding and propeller driven level-flight, which can make the glider work in strong currents, as well as many other complicated ocean environments. Its maximal gliding speed reaches 1 knot and the propelling speed is up to 3 knots. In this paper, a 3D dynamic model of Petrel-II is derived using linear momentum and angular momentum equations. According to the dynamic model, the spiral motion in the underwater space is simulated for the gliding mode. Similarly the cycle motion on water surface and the depth-keeping motion underwater are simulated for the level-flight mode. These simulations are important to the performance analysis and parameter optimization for the Petrel-II underwater glider. The simulation results show a good agreement with field trials. 相似文献
20.
海洋波浪能平均功率的准确计算是波浪能开发和利用的基础。实践中，波浪能转换装置一般安装在有限水深区域。对于随机波，只有当详尽的波浪谱已知的时候，有限水深区的波能功率才能被准确计算出来。由于种种原因，实践中波浪的实测数据大多以散点图或有义波高和统计波周期的形式给出，而波浪谱信息有时则很难获得。基于这种情况，传统上人们利用无限水深条件下的相关公式来估算有限水深区域的波能功率，但这种做法会造成较大的误差。本研究显示，对于50 m水深的理论波谱JONSWAP谱来说该误差高达14.6%。为了提高波能功率计算的准确性，本文提出了一种基于能量频率的一阶和二阶近似算法，可以在未知波浪谱的情况下较为准确地计算不同水深时的波能功率。针对两种理论波浪谱的计算结果表明，本方法在计算有限带宽内的波能功率时计算误差低于2.8%。 相似文献