共查询到20条相似文献，搜索用时 515 毫秒
1.
采用二阶时域理论对非线性波浪在任意三维物体周围的绕射问题进行了研究，对自由表面边界条件进行Taylor级数展开，应用摄动展开可以建立相应的边值问题，而且此边值问题的计算域不随时间变化，运用基于B－样条的边界元方法求解每一时刻的波浪场，二阶自由表面边界条件在时间上进行数值积分，在自由表面加了一个人工阻尼层以避免波浪的反射，速度势分解为已知的入射势和未知的散射势，初始条件采用二阶Stokes波浪场，通过加入物体表面边界条件，得到散射势在时间和空间上的发展，本文对圆柱所受规则波的二阶波浪力和波浪爬高进行了计算，数值结果表明此理论计算准确，效率高，数值稳定。 相似文献
2.
孤立波与带窄缝双箱相互作用模拟研究 总被引：1，自引：1，他引：0
针对孤立波与带窄缝双箱的作用问题,应用时域高阶边界元方法建立了二维数值水槽。其中,自由水面满足完全非线性运动学和动力学边界条件,对瞬时自由表面流体质点采用混合欧拉-拉格朗日法追踪,采用四阶龙格库塔法对下一时刻的自由水面的速度势和波面升高进行更新。采用加速度势法求解物体湿表面的瞬时波浪力。采用推板方法生成孤立波。通过模拟孤立波在直墙上的爬高以及施加在直墙上的波浪力,并与已发表的实验和数值结果对比,验证本数值模型的准确性。通过数值模拟计算研究了窄缝宽度、方箱尺寸对波浪在箱体迎浪侧爬高,窄缝内波面升高,箱体背浪侧透射波高及箱体受波浪荷载的影响。同时研究了有一定时间间隔的双孤立波与带窄缝双箱系统作用问题。 相似文献
3.
本文给出有限水深二维物体二阶绕射势在外域中的解析表达式，从而准确满足二阶绕射势的辐射条件。二阶绕射势在内域自由表面上的边界条件则由一阶势的数值微分求得。然后对内域用简单Ｇｒｅｅｎ函数法求得二阶绕射势。本文对二维浮体和潜体在不同水深和潜深情况下的绕射问题进行了计算，求得了二阶绕射势和二阶定常及倍频波浪力。讨论了水深和潜深对波浪力的影响以及二阶绕射势对非线性波浪力的贡献 相似文献
4.
基于势流理论和时域高阶边界元方法,建立了三维完全非线性数值波浪水槽模型.利用源造波法产生入射波浪,应用五阶斯托克斯波理论给定波浪速度;采用混合欧拉-拉格朗日方法追踪流体瞬时水面,将二阶泰勒级数展开法应用于更新下一时间步的波面和速度势;通过加速势的方法准确计算自由水面速度的法向导数和物面速度势的时间导数.对完全非线性波浪进行了模拟,得到了稳定的波形.当波浪非线性较小时,与四阶Runge- Kutta法(RK4)计算结果和五阶斯托克斯波理论解均吻合良好;随着波浪非线性的增大,计算结果误差逐渐增大.通过数值试验分析,在满足精度要求的基础上,本方法计算时间略大于四阶Runge- Kutta法的四分之一,大大减少了计算量. 相似文献
5.
6.
深水中波浪与弱流对结构物的作用 总被引：4，自引：0，他引：4
对于深水中波浪和弱流对三维结构物的作用问题,本文提出了一个适用于高阶边界元应用的新的积分方程.基于小流速下格林函数和速度势的摄动展开,本方法避免了移动脉动源的计算,并将未知量限制在物体表面上,使计算速度大为提高,高阶边界元中的不同类型的柯西主值积分,分别采用间接和直接方法加以计算. 相似文献
7.
本文用有限元法配合时步处理来求解三维非线性水波的绕射问题,自由表面条件和物面条件都满足到二阶,采用人工阻尼区来吸收反射波,流场内的速度势通过求解有限元方程得到。对垂直圆柱体的绕射问题进行了计算,得到了自由表面波高时间历程和圆柱所受到的波浪力,计算结果和有关文献的理论计算结果进行了比较。 相似文献
8.
在快速模拟波浪运动的谱方法基础上,引入造波边界,建立了模拟波浪产生和运动的二阶计算模型。采用摄动展开方法简化了带有造波边界的水波运动问题,将速度势分解,得到了满足造波边界和自由面边界的速度势的一般解,运用快速Fourier变换和时间积分,建立了模拟波浪产生和运动的数学模型。基于该模型,采用不同的数值造波条件,模拟了波浪的产生问题;考虑了波浪的初始运动问题;通过把数值结果与物理实验的比较,验证了波浪计算模型的有效性。 相似文献
9.
准确确定越浪量对于斜坡堤设计有重要意义。利用格子Boltzmann方法(LBM),并采用主动吸收式速度入口造波、出流边界消波、VOF方法追踪自由表面以及静态Smagorinsky模型模拟紊流运动,建立二维数值波浪水槽,对光滑斜坡堤上规则波与不规则波越浪进行数值模拟。模拟结果与试验值及其他数值模型结果比较表明,二维LBM数值波浪水槽具有模拟斜坡堤越浪的能力,但对于破碎较为剧烈的越浪过程模拟,该模型还存在一定的不足,未来可从提高自由表面模型精度等方面进一步改善其性能。 相似文献
10.
11.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
12.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
13.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
14.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
15.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
16.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
17.
18.
19.
《海洋学报(英文版)》2014,(11):161-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology, 相似文献