首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 411 毫秒
1.
The Neoproterozoic Zerrissene Turbidite Complex of central-western Namibia comprises five turbiditic units. From the base to the top they are the Zebrapüts Formation (greywacke and pelite), Brandberg West Formation (marble and pelite), Brak River Formation (greywacke and pelite with dropstones), Gemsbok River Formation (marble and pelite) and Amis River Formation (greywacke and pelites with rare carbonates and quartz-wacke).In the Lower Ugab River valley, five siliciclastic facies were recognised in the Brak River Formation. These are massive and laminated sandstones, classical turbidites (thick- and thin-bedded), mudrock, rare conglomerate and breccia. For the carbonate Gemsbok River Formation four facies were identified including massive non-graded and graded calcarenite, fine grained evenly bedded blue marble and calcareous mudrock. Most of these facies are also present in the other siliciclastic units of the Zerrissene Turbidite Complex as observed in other areas.The vertical facies association of the siliciclastic Brak River Formation is interpreted as representing sheet sand lobe to lobe-fringe palaeoenvironment with the abandonment of siliciclastic deposition at the top of the succession. The vertical facies association of the carbonate Gemsbok Formation is interpreted as the slope apron succession overlain by periplatform facies, suggesting a carbonate slope sedimentation of a prograding depositional shelf margin.If the siliciclastic–carbonate paired succession would represent a lowstand relative sea-level and highstand relative sea-level, respectively, the entire turbidite succession of the Zerrissene Turbidite Complex can be interpreted as three depositional sequences including two paired siliciclastic–carbonate units (Zebrapüts-Brandberg West formations; Brak River–Gemsbok formations) and an incomplete succession without carbonate at the top (Amis River Formation).  相似文献   

2.
Isolated, high relief carbonate platforms developed in the intracratonic basin of east-central Mexico during Albian-Cenomanian time. Relief on the platforms was of the order of 1000 m and slopes were as steep as 20–43°. Basin-margin debris aprons adjacent to the platforms comprise the Tamabra Formation. In the Sierra Madre Oriental, at the eastern margin of the Valles-San Luis Potosi Platform, an exceptionally thick (1380m) progradational basin to platform sequence of the Tamabra Formation can be divided into six lithological units. Basinal carbonate deposition that preceded deposition of the Tamabra Formation was emphatically punctuated by an allochthonous reef block 1 km long by 0·5 km wide with a stratigraphic thickness of 95 m. It is encased in Tamabra Formation unit A, approximately 360 m of peloidal-skeletal wackestone and lithoclastic-skeletal packstone that includes some graded beds. Unit B is 73 m of massive dolomite with sparse skeletal fragments and intraclasts. Unit C, 114m thick, consists of structureless skeletal wackestone passing upward into graded skeletal packstone. Interlaminated lime mudstone and fine grained bioclastic packstone with prominent horizontal burrows are interspersed near the top. Unit D is 126 m of breccia with finely interbedded skeletal grainstone and burrowed or laminated mudstone. The breccias contain a spectrum of platform-derived lithoclasts and basinal intraclasts, up to 10 m in size. The breccias are typically grain supported (rudstone) with a matrix of lightly to completely dolomitized mudstone or skeletal debris. Beds are up to several metres thick. Unit E is 206 m of massive, sucrosic dolomite that replaced breccias. Unit F is approximately 500 m of thick bedded to massive skeletal packstone with abundant rudists and a few mudstone intraclasts. Metre scale laminated lime mudstone beds are interspersed. The section is capped by El Abra Formation platform margin limestone, consisting of massive beds of caprinid packstone and grainstone with many whole valves. Depositional processes within this sequence shift from basinal pelagic or peri-platform sedimentation to distal, platform-derived, muddy turbidity currents with a large slump block (Unit A); through more proximal (coarser and cleaner) turbidity currents (Unit B?, C); to debris flows incorporating platform margin and slope debris (Units D, E). Finally, a talus of coarse, reef-derived bioclasts (Unit F) accumulated as the platform margin prograded over the slope sequence. Interspersed basinal deposits evolved gradually from largely pelagic to include influxes of dilute turbidity currents. Units containing turbidites with platform-derived bioclasts reflect flooding of the adjacent platform. Breccia blocks and lithoclasts were probably generated by erosion and collapse of the platform during lowstands. Laminated, black, pelagic carbonates, locally cherty, are interbedded with both breccias and turbidites. At least those interbedded with turbidites may have been deposited within an expanded mid-water oxygen minimum zone during relative highstands of sea level. They are in part coeval with mid-Cretaceous black shales of the Atlantic Ocean.  相似文献   

3.
ABSTRACT The Sumeini Group formed along the passive continental margin slope that bounded the northeastern edge of the Arabian carbonate platform. With the initial development of this passive continental margin in Oman during Early to Middle Triassic time (possibly Permian), small carbonate submarine fans of the C Member of the Maqam Formation developed along a distally steepened slope. The fan deposits occur as several discrete lenticular sequences of genetically related beds of coarsegrained redeposited carbonate (calciclastic) sediment within a thick interval of basinal lime mudstone and shale. Repeated pulses of calciclastic sediment were derived from ooid shoals on an adjacent carbonate platform and contain coarser intraclasts eroded from the surrounding slope deposits. Sediment gravity flows, primarily turbidites with lesser debris flows and grain flows, transported the coarse sediments to the relatively deep submarine fans. Channel erosion was a major source of intraformational calcirudite. Two small submarine fan systems were each recurrently supplied with calciclastic sediment derived from point sources, submarine canyons. The northern fan system retrogrades and dies out upsection. The southern fan system was apparently longer-lived; calciclastic sediments in it are more prevalent and occur throughout the section. The proximal portions of this fan system are dominated by channelized beds of calcirudite which represent inner- to mid-fan channel complexes. The distal portions include mostly lenticular, unchannelized beds of calcarenite, apparently mid- to outer-fan lobes. Carbonate submarine fans appear to be rare in the geological record in comparison with more laterally continuous slope aprons of coarse redeposited sediment. The carbonate submarine fans of the C Member apparently formed by the funnelling of coarse calciclastic sediment into small submarine canyons which may have developed due to rift and/or transform tectonics. The alternation of discrete sequences of calciclastic sediment with thick intervals of ‘background’ sediment resulted from either sea-level fluctuations or pulses of tectonic activity.  相似文献   

4.
自泥盆纪埃姆斯期, 广西受陆内裂陷影响, 形成碳酸盐台地与台沟间列的构造格局.吉维特期开始, 六景及相邻的黎塘一带逐渐形成孤立台地的沉积背景.吉维特期, 六景剖面的民塘组为以竹节石为特色的礁前斜坡生态系, 尽管目前没有出露生物礁, 从礁前角砾岩可以恢复曾经存在的礁生态系.而黎塘一带塘家湾组为以珊瑚、层孔虫、腕足类为主要特色的台地生态系.弗拉斯期, 六景剖面的谷闭组则为少量珊瑚、腕足、层孔虫为特色的局限-半开放台地生态系.黎塘一带的桂林组仍为以珊瑚、层孔虫、腕足类为主要特色的台地生态系.六景、黎塘地区自法门期开始发生生态系突变, 六景剖面的融县组和黎塘一带的东村组发育藻礁丘或藻席为特色的藻生态系.该生态系的突变是F-F生物群集绝灭造成的生物类群突变的结果.生态系的特征也与吉维特-弗拉斯期烃源岩的形成、演化密切相关.   相似文献   

5.
梁传茂 Fred.  GM 《现代地质》1992,6(4):426-430
作者认为北美阿巴拉契亚地区和我国贺兰山地区奥陶系的一套碳酸盐砾岩层序,就是低海平面时期的一种特殊沉积岩相。这种岩相不仅是古海洋条件变化的一种标志,而且也是良好的油气储集层。文中主要从沉积学的角度解释了它们的形成机制。  相似文献   

6.
The Las Aguaditas Formation in the Argentine Precordillera of San Juan is the only Ordovician carbonate sequence deposited on a slope. Spiculites, mudstones and calcisiltites represent the autochthonous sediments, characterized by a fine lamination, rare fossils and their dark colour. The pelagic fauna consists of rare radiolarians/calcispheres, trinucleid trilobites, graptolites and conodonts. The latter are typical of an open marine environment and proved a Llanvirn—Llandeilo age for the Las Aguaditas Formation.In the upper part of the succession there are several intercalations of megabreccias. Their thickness decreases from about 20 to 4 m towards the top of the formation, accompanied by an increasing amount of carbonate turbidites. The clasts of the breccias are derived from the slope as well as the platform. Each of the megabreccia horizons represents a system of channels, lobes and interchannel deposits, which together form a slope apron. On top of the lower breccia a small biostrome developed, where bryozoans and crinoids are preserved in an autochthonous position.Sedimentation of the Las Aguaditas Formation started with the drowning of the underlying carbonate platform (San Juan limestones). Near the Arenig-Llanvirn boundary, a rapid ecstatic sea-level rise led to the deposition of graptolitic black shales and mudstones. Upwards, allochthonous carbonates become increasingly abundant. The onset of megabreccia deposition coincides with a major relative sea-level fall, caused by block movements in connection with rifting. The subsequent transition from breccia formation towards turbiditic sedimentation corresponds to an environmental shift from the slope towards the toe of slope and basin and marks a renewed moderate sea-level rise. Correspondence to: M. Keller  相似文献   

7.
The development and behavior of million year-scaled depositional sequences recorded within Palaeozoic carbonate platform has remained poorly examined. Therefore, the understanding of palaeoenvironmental changes that occur in geological past is still limited. We herein undertake a multi-disciplinary approach (sedimentology, conodont biostratigraphy, magnetic susceptibility (MS), and geochemistry) of a long-term succession in the Carnic Alps, which offers new insights into the peculiar evolution of one of the best example of Palaeozoic carbonate platform in Europe. The Freikofel section, located in the central part of the Carnic Alps, represents an outstanding succession in a fore-reef setting, extending from the Latest Givetian (indet. falsiovalis conodont zones) to the Early Famennian (Lower crepida conodont zone). Sedimentological analysis allowed to propose a sedimentary model dominated by distal slope and fore-reef-slope deposits. The most distal setting is characterized by an autochthonous pelagic sedimentation showing local occurrence of thin-bedded turbiditic deposits. In the fore-reef slope, in a more proximal setting, there is an accumulation of various autochthonous and allochthonous fine- to coarse-grained sediments originated from the interplay of gravity-flow currents derived from the shallow-water and deepwater area. The temporal evolution of microfacies in the Freikofel section evolves in two main steps corresponding to the Freikofel (Unit 1) and the Pal (Unit 2) limestones. Distal slope to fore-reef lithologies and associate changes are from base to top of the section: (U1) thick bedded litho- and bioclastic breccia beds with local fining upward sequence and fine-grained mudstone intercalations corresponding, in the fore-reef setting, to the dismantlement of the Eifelian–Frasnian carbonate platform during the Early to Late Frasnian time (falsiovalis to rhenana superzones) with one of the causes being the Late Givetian major rift pulse; (U2) occurrence of thin-bedded red nodular and cephalopod-bearing limestones with local lithoclastic grainstone intercalations corresponding to a significant deepening of the area and the progressive withdrawal of sedimentary influxes toward the basin, in relation with Late Frasnian sea-level rise. MS and geochemical analyses were also performed along the Freikofel section and demonstrate the inherent parallel link existing between variation in MS values and proxy for terrestrial input. Interpretation of MS in terms of palaeoenvironmental processes reflects that even though distality remains the major parameter influencing MS values, carbonate production and water agitation also play an important role.  相似文献   

8.
Mixed carbonate-siliciclastic sediment gravity flow deposits of Late Pennsylvanian to Early Permian age are exposed in the Death Valley - Owens Valley region of east-central California. The Mexican Spring unit constitutes the upper part of the Keeler Canyon Formation and is characterized by turbidites, debris flow deposits and megabreccias, all of mixed carbonate-siliciclastic composition. The mixed composition of the Keeler Canyon Formation provides an opportunity to link facies architecture to controls on depositional system development. Depositional relationships indicate that the deposits represent a non-channellized base of slope carbonate apron system with inner, outer and basinal facies associations. These gravity flow deposits are characterized by repeated stacked, small scale (<15 m) coarsening and thickening upward cycles with superimposed medium scale (>100 m) coarsening and thickening upward cycles. Contemporaneous outer shelf and upper slope deposits of the Tippipah Limestone are exposed at Syncline Ridge on the Nevada Test Site. The deposits consist of carbonate buildups directly overlain by cross bedded, quartz-rich sandstone and conglomerate which filled channels that traversed across the previously existing carbonate shelf. Detritus was transported to the west, down the upper slope by gully systems that fed the temporally persistent base of slope apron of the upper part of the Keeler Canyon Formation. This style of deposition differs from point-sourced siliciclastic submarine fan depositional systems. However, the Keeler Canyon system has lithofacies similar to some sandy siliciclastic turbidite systems, such as the delta-fed submarine ramp facies model, which is a line-sourced, shelf-fed system that is not supply limited. The mixed clastic apron systems of the Keeler Canyon Formation differ from classical carbonate aprons in that the former is characterized by an abundance of sedimentary cycles. Controls on the development of these cycles and of the facies distribution may have resulted from changes in type and rate of sediment supply, relative sea level changes and/or tectonic events. Interpretation of the data is focused on relative changes in sea level as the most significant control on development of the depositional system. Relative sea level changes serve two important functions: (1) they provide a mechanism for bringing coarse siliciclastic and bioclastic grains together on the outer shelf, and (2) shelf margin collapse may be initiated during relative lowstands allowing for transport of the sediment to the deep basin and development of deep basinal cycles. Therefore, an abundance of mixed clastic gravity flow deposits such as these in the rock record may be an indicator of periods of high frequency changes in relative sea level, which is a characteristic of Late Palaeozoic sea level history.  相似文献   

9.
A Lower Cretaceous carbonate platform depositional system with a rimmed margin and an adjacent oversteepened slope was analysed in order to determine its depositional architecture and major depositional controls. The platform is made up of coral, rudist, orbitolinid and algal limestones and, in a 12-km dip transect, there is a gradation from lagoon to platform margin, slope and basin environments, each characterized by distinctive sedimentological features and facies associations. The rimmed platform is an aggradational system developed during approximately 4·2 million years of fluctuating relative sea-level rise, and it is bounded by unconformities at its base and top. Internal cyclicity in the construction of the system is evident, mainly in platform interior and slope settings. The seven recognized sequences average 0·6 million years in duration and are related to minor relative sea-level changes. Carbonate deposition occurred in shallow- and deep-water settings during periods of high relative sea level. Reduced rates of sea-level rise led to the development of shallowing upward sequences and, eventually, to the exposure of the shallowest parts of the platform during relative sea-level falls. During low relative sea level, erosion surfaces developed on the slope, and gravitational resedimentation occurred at the toe of slope. Basinwards, resedimented units pinch out over distances of a few hundred metres. Active faults controlled sedimentation at the platform margin, promoting the development of steep slopes (up to 35°) and preventing progradation of the shallow-water platform, despite high sediment production rates. The development of sequences is interpreted to be related to tectonic activity.  相似文献   

10.
In this study, progradation and the subsequent retrogradation of a late Paleocene isolated carbonate platform (Galala Mountains, Eastern Desert, Egypt) is demonstrated by variations of distinct facies associations from the platform margin in the north to the hemipelagic basin in the south. A combination of a sea-level drop and tectonic uplift at around 59 Ma (calcareous nannofossil biozone NP5) favored the initiation of the carbonate platform. From this time onwards, the facies distribution along the platform–basin transect can be subdivided into five facies belts comprising nine different facies associations. Their internal relationships and specific depositional settings are strongly coupled with the Maastrichtian–Paleocene seafloor topography, which resulted from local tectonic movements. Patch reefs and reef debris were deposited at the platform margin and the horizontally bedded limestones on the upper slope. Slumps and debris flows were stored on the lower slope. In the subhorizontal toe-of-slope facies belt, mass-flow deposits pass into calciturbidites. Further southwards in the basin, only hemipelagic marls were deposited. Between 59 and 56.2 Ma (NP5–NP8), the overall carbonate platform system prograded in several pulses. Distinct changes in facies associations from 56.2 to 55.5 Ma (NP9) resulted from rotational block movements. They led to increased subsidence at the platform margin and a coeval uplift in the toe-of-slope areas. This resulted in the retrogradation of the carbonate platform. Furthermore the patch-reef and reef-debris facies associations were substituted by the larger foraminifera shoal association. The retrogradation is also documented by a significant decrease in slump and debris-flow deposits on the slope and calciturbidites at the toe of slope.  相似文献   

11.
The evolution and architecture of a set of retreating Lower Frasnian patch reef outcrops in the Canning Basin of Western Australia were evaluated, and their depositional and stratigraphic contacts spatially recorded using digital surveying tools. The geological data, together with high‐resolution digital elevation models, were assembled in three‐dimensional visualization and modelling software and subsequently used for building two‐dimensional surface models and three‐dimensional volumetric models. Numerical data on geometry and shape were extracted from these models and used to quantitatively assess the retrogradation motif of patch reef development. The development of the patch reefs comprises three stages. During stages 1 and 2, the patch reefs exhibited an overall retrogradational escarpment‐type configuration displayed by, on average, 60° steep reef‐margin walls that lacked the support of coeval slope deposits. The subdivision between stages 1 and 2 is based on minor backstepping reducing less than 10% of the platform‐top area. The onset of stage 3 is recognized by stromatolite development fringing reef‐margin walls. During stage 3 an aggrading accretionary reef‐margin developed, comprising allochthonous and autochthonous slope deposits. Both types of slope deposit onlap the previous stages and are distributed unevenly with allochthonous slope deposits being noticeably absent around the smaller and more elongate patch reefs. The variation in distribution of slope sediment type can be explained by the amount, linked to platform size, of platform‐top shedding. Small patch reefs were unable to fill the available accommodation adjacent to escarpments with allochthonous slope sediments and were thus encroached by autochthonous slope sediments. The variation, which cannot be explained by the size difference in the platform‐top factory, has been related to the difference in perimeter length. For patch reefs with similar platform‐top production areas, a more elongate patch reef inherits a longer perimeter and a proportionally smaller volume of allochthonous slope sediment per margin length will be transported to the flanks. Thus, the more elongate patch reef intrinsically contained more sites within which autochthonous slope sediments developed. Digital outcrop modelling and numerical evaluation of the evolution of the patch reefs revealed the major differences in retrogradation motif. The quantified variations in progressive decline of platform‐top area with height were confirmed by hypothetical decline curves for ellipse‐shaped carbonate systems for which aspect ratio (ratio between length and width) varied. This mathematical model demonstrates that the progressive decline of the production area is highly sensitive to shape and can be used to numerically assess and predict the relative timing of drowning, i.e. when the platform‐top production area becomes nil, of retrogradational isolated carbonate platforms that are controlled by high accommodation. Wider implications can be surmised for highstand systems tracts and prograding carbonate systems. For example, for equally sized platforms with hypothetically similar carbonate factories and identical external forces, the potential to prograde by platform‐top shedding is higher with a smaller aspect ratio because the shorter perimeter implies less accommodation space needing to be filled up to commence slope progradation. Clearly, there are intrinsic effects of shape on the development of carbonate platform systems.  相似文献   

12.
Devonian reef complexes were well developed in Western Australia and South China, but no detailed direct comparison has been made between reef building in the two regions. The regions differ in several respects, including tectonic, stratigraphic and palaeoceanographic–palaeogeographic settings, and the reef building styles reflect minor differences in reef builders and reef facies. Similarities and differences between the two reef complexes provide insights into the characteristics of platform margins, reef facies and microbial carbonates of both regions. Here we present a comparison of platform margin types from different stratigraphic positions in the Late Devonian reef complex of the Canning Basin, Western Australia and Middle and Late Devonian margin to marginal slope successions in Guilin, South China. Comparisons are integrated into a review of the reefal stratigraphy of both regions. Reef facies, reef complex architecture, temporal reef builder associations, 2nd order stratigraphy and platform cyclicity in the two regions were generally similar where the successions overlap temporally. However, carbonate deposition began earlier in South China. Carbonate complexes were also more widespread in South China and represent a thicker succession overall. Platforms in the Canning Basin grew directly on Precambrian crystalline basement or early Palaeozoic sedimentary rocks, but in South China, carbonate complexes developed conformably on older Devonian siliciclastic strata. Pre-Frasnian reef facies in South China had more abundant skeletal frameworks than in Canning Basin reefs of equivalent age, and Famennian shoaling margins containing various microbial reefs may have been more common and probably more diverse in South China. However, Late Devonian platform margin types have been documented more completely in the Canning Basin. Deep intra-platform troughs (deep depressions containing non-carbonate pelagic sediments — Nandan-type successions) that developed along syndepositional faults characterize Devonian carbonate platforms in South China, but have no equivalent on the Lennard Shelf, Canning Basin where inter-reef areas were more shallow. The South China platform-to-depression pattern was generally continuous from the Lower to Upper Devonian, indicating that many pre-Devonian tectonic features continued to exercise considerable effect through deposition. Localized, fault-controlled subsidence was an important factor in both regions, but similarities in 2nd order aggradation–progradation cycles suggest that eustasy was also an important control on the larger scale stratigraphic development of both regions.  相似文献   

13.
海西—印支期上扬子地块发育稳定型的碳酸盐岩大台地,在碳酸盐岩台地南缘台地边缘沉积体系发育,主要包括4种沉积类型:台地边缘滩,台地边缘礁、台地前缘斜坡、滩(礁)间海。据海西—印支期台缘沉积发育及分布特征,可分为4个沉积演化阶段:中泥盆世—晚泥盆世(SS1),台缘沿弥勒—师宗—晴隆—南丹—河池一线呈带状分布,台缘礁滩发育;早石炭世—早二叠世早期(SS2-SS3),台缘沿晴隆—六盘水—安顺呈带状分布,台缘生屑滩发育;早二叠世晚期—晚二叠世(SS4),沿贞丰—紫云—罗店—河池—柳州—娄底呈带状分布,台缘滩、台缘礁交互发育;早三叠世—中三叠世(SS5),沿贞丰—镇宁—贵阳—福泉一线呈带状分布,早三叠世主要发育台缘鲕粒滩,中三叠世台缘礁占优势。这4个阶段的台缘沉积特征表明:台地边缘礁滩沉积体系垂向演化受海平面变化控制,横向迁移主要受同沉积断裂控制,不同类型生物的出现和绝灭控制台缘生物礁滩的类型及特征。  相似文献   

14.
中奥陶世克里摩里期,鄂尔多斯西部地区为镶边陆架的碳酸盐岩台地,自东向西依次发育开阔台地、台地边缘浅滩、台缘斜坡—斜坡脚、广海陆棚和深水海槽相带,从浅水区经由碎屑流搬运来的块状钙质角砾岩在台缘斜坡—斜坡脚相带集中堆积,形成厚度不等的透镜体夹于正常深水灰泥石灰岩和泥岩中。乌拉力克期发生较大规模构造运动,盆地东部整体抬升,西部边缘发生裂陷,沉积范围以同生正断层为界,随着海平面的上升沉积环境演变为相对闭塞的深水斜坡—盆地,沉积一套富含笔石的泥页岩地层,并不时有陆源克里摩里组垮塌的石灰岩沉积物被带入盆地,形成数量不等的多套角砾岩夹层。  相似文献   

15.
A steep‐margined carbonate platform is developed in the Carboniferous synorogenic foreland basin of northern Spain. Dips of 60–90° produced during Late Carboniferous thrusting enable cross‐sections of a 4‐km‐wide portion of the marginal area of this platform (Las Llacerias outcrop) to be studied in aerial photographs at a seismic scale. Three stratal domains are observed: (1) a horizontal‐bedded platform; (2) a clinoformal‐bedded margin with a relief of up to 500 m; and (3) a low‐angle toe‐of‐slope, where slope beds interfinger with basin sediments. The slope shows well‐bedded sigmoidal clinoforms with depositional dips ranging from 15° to 32°. Based on lithology and stratal patterns, four facies groups have been recognized: (1) a flat‐topped platform, in which thick algal boundstone, skeletal packstone–grainstone and peloidal micrite wackestone with a poorly rhythmic character prevail; (2) the platform margin and upper slope, characterized by microbial boundstone spanning a bathymetric range of ≈150 m measured from the break of slope; (3) a slope, predominantly composed of margin‐derived rudstones and breccias; and (4) a toe‐of‐slope to basin zone, where a cyclic alternation of spiculitic siltstones, packstone to grainstone calciturbidites and rudstone/breccia is visible. Five successive stages of platform development are deduced: (1) Bashkirian: flooding of the pre‐existing Serpukhovian platform giving rise to the nucleation of a low‐angle ramp to the south‐east of the study area with microbial mud‐mound accumulations, and breccias and calciturbidites on the margins; (2) Early Moscovian: an influx of siliciclastic sediment buried part of the platform and reduced the area of carbonate sedimentation; (3) Moscovian: aggradation and progradation of the carbonate system produced an extensive steep‐margined and flat‐topped shallow‐water platform (shelf system); (4) Latest Moscovian–earliest Kasimovian: drowning of the platform; and (5) Kasimovian: covering of the platform by marly calcareous ramp sediments.  相似文献   

16.
The Kingston Peak Formation of the Pahrump Group in the Death Valley region of the Basin and Range Province, USA, is the thick (over 3 km) mixed siliciclastic–carbonate fill of a long‐lived structurally‐complex Neoproterozoic rift basin and is recognized by some as a key ‘climatostratigraphic’ succession recording panglacial Snowball Earth events. A facies analysis of the Kingston Peak Formation shows it to be largely composed of ‘tectonofacies’ which are subaqueous mass flow deposits recording cannibalization of older Pahrump carbonate strata exposed by local faulting. Facies include siltstone, sandstone and conglomerate turbidites, carbonate megabreccias (olistoliths) and related breccias, and interbedded debrites. Secondary facies are thin carbonates and pillowed basalts. Four distinct associations of tectonofacies (‘base‐of‐scarp’; FA1, ‘mid‐slope’; FA2, ‘base‐of‐slope’; FA3, and a ‘carbonate margin’ association; FA4) reflect the initiation and progradation of deep water clastic wedges at the foot of fault scarps. ‘Tectonosequences’ record episodes of fault reactivation resulting in substantial increases in accommodation space and water depths, the collapse of fault scarps and consequent downslope mass flow events. Carbonates of FA4 record the cessation of tectonic activity and resulting sediment starvation ending the growth of clastic wedges. Tectonosequences are nested within regionally‐extensive tectono‐stratigraphic units of earlier workers that are hundreds to thousands of metres in thickness, recording the long‐term evolution of the rifted Laurentian continental margin during the protracted breakup of Rodinia. Debrite facies of the Kingston Peak Formation are classically described as ice‐contact glacial deposits recording globally‐correlative panglacials but they result from partial to complete subaqueous mixing of fault‐generated coarse‐grained debris and fine‐grained distal sediment on a slope conditioned by tectonic activity. The sedimentology (tectonofacies) and stratigraphy (tectonosequences) of the Kingston Peak Formation reflect a fundamental control on local sedimentation in the basin by faulting and likely earthquake activity, not by any global glacial climate.  相似文献   

17.
The Upper Cretaceous (Cenomanian-Maastrichtian) of the south-central Pyrenees shows five carbonate platform sequences where the major parameters are tectonism, relative sea-level fluctuations and inherited depositional profile. Depositional geometries and basin analysis permit an understanding of the depositional history.Five depositional sequences have been recognized: (1) The Santa Fe sequence (Middle-Upper Cenomanian), a ramp to a skeletal rimmed shelf with an escarpment bypass margin. The lower boundary is an angular unconformity and the upper one records a sea-level drop. The platform location of the margin was determined by a listric normal fault. (2) An abrupt sea-level rise drowned the former platform. The Congost sequence (Turonian-Lower Coniacian), a distally steepened ramp with erosional distal deep slope. The depositional model was largely controlled by pre-existing basin morphology. Cessation of platform development was due to a relative sea-level drop. (3) The Sant Corneli sequence (Upper Coniacian-Lower Santonian), a mixed terrigenous-skeletal homoclinal ramp with upright margin, deep slope and dysaerobic basin. The slope results from the backstepping by 24 km of the previous margin and gentle basin tilting. The platform margin remained more or less at the same position, and relief between platform and slope increased indicating continuous relative sea-level rise. The upper boundary is an angular unconformity at the platform margin produced by an abrupt sea-level rise and platform drowning, and by listric normal faulting. (4) The Vallcarga sequence (Upper Santonian-Campanian), a distal-steepened skeletal homoclinal ramp, erosional escarpment and turbidite basin, which corresponds to the Mesozoic maximum marine expansion. A listric normal fault created two depositional areas: a more or less flat footwall block with a north-northwest prograding carbonate ramp.  相似文献   

18.
The Coopers Creek Limestone represents an Early Devonian redeposited carbonate accumulation and records the evolution of a carbonate slope in the southeastern portion of the Melbourne Trough. During the earliest Devonian, the underlying Boola Formation was deposited, probably as turbidites, in a moderately deep‐water setting. The presence of chert and greenstone clasts in the top of the formation indicates exposure of an area of Cambrian greenstones in this part of the Melbourne Trough, as a result of uplift associated with the earliest Devonian Bowning Orogeny. This uplift provided ideal conditions for carbonate production along the margin of the exposed landmass. The periodic transportation of carbonate material downslope resulted in the accumulation of the Coopers Creek Limestone. Initially, in the early Pragian, turbidity currents deposited clayey biomicrites and biopelmicrites on a relatively gentle slope. However, the rapid build‐up of carbonate sand banks at the shelf margin steepened the gradient from the shelf into the basin and a bypass margin began to develop. Grainflows deposited pelsparites and biopelsparites and the presence of debris flow breccias indicates erosion of lithified limestone by channelling. Continued carbonate build‐up led to the development of a rimmed reef margin in the earliest Emsian, with a steep fore‐reef gradient. Large blocks of reefal limestone fell or rolled to the base of the slope, to accumulate as reefal megabreccias at the top of the Coopers Creek Limestone. Carbonate production abruptly ceased in the early Emsian, due to the uplift of a quartzo‐micaceous source to the east during the initial stages of the Tabberabberan Orogeny. This uplift supplied abundant terrigenous material into the Melbourne Trough to be deposited as the turbidites of the Walhalla Group, which deeply buried the limestone accumulation.  相似文献   

19.
《Sedimentary Geology》2005,173(1-4):187-232
This study describes the coeval development of the depositional environments in three areas across the Mut Basin (Southern Turkey) throughout the Late Burdigalian (early Miocene). Antecedent topography and rapid high-amplitude sea-level change are the main controlling factors on stratigraphic architecture and sediment type. Stratigraphic evidence is observed for two high-amplitude (100–150 m) sea-level cycles in the Late Burdigalian to Langhian. These cycles are interpreted to be eustatic in nature and driven by the long-term 400-Ka orbital eccentricity-cycle-changing ice volumes in the nascent Antarctic icecap. We propose that the Mut Basin is an exemplary case study area for guiding lithostratigraphic predictions in early Miocene shallow-marine carbonate and mixed environments elsewhere in the world.The Late Burdigalian in the Mut Basin was a time of relative tectonic quiescence, during which a complex relict basin topography was flooded by a rapid marine transgression. This area was chosen for study because it presents extraordinary large-scale 3D outcrops and a large diversity of depositional environments throughout the basin. Three study transects were constructed by combining stratal geometries and facies observations into a high-resolution sequence stratigraphic framework. 3346 m of section were logged, 400 thin sections were studied, and 145 biostratigraphic samples were analysed for nannoplankton dates (Bassant, P., 1999. The high-resolution stratigraphic architecture and evolution of the Burdigalian carbonate-siliciclastic sedimentary systems of the Mut Basin, Turkey. PhD Thesis. GeoFocus 3. University of Fribourg, 277 p.).The first transect (Alahan) is on the northwestern basin margin. Here, the siliciclastic input is high due to the presence of a river system. The siliciclastic depocentre migrates landwards during transgressions, creating an ecological window allowing carbonates to develop in the distal part of the delta. Carbonate production shuts down during the regression when siliciclastics return. The second transect (Pirinç) is also situated on the northern basin margin 12 km to the east of the Alahan section. It shows a complete platform-to-basin transition. An isolated carbonate platform complex develops during the initial flooding, which is drowned during a time of rapid sea-level rise and environmental stress, associated with prograding siliciclastics. The shelf margin then retrogrades forming large-scale clinoform geometries and progrades before a major sea-level fall provokes slumping collapse, followed by rebuilding of the shelf margin as sea level rises again. The third transect (Silifke) has a steep asymmetric Pre-Miocene valley-topography, forming a narrow strait, linking the Mut Basin to the Mediterranean. Strong tidal currents are generated in this strait area. Siliciclastic input is low and localised. Eighty metres of cross-bedded bioclastic sands are deposited in a tidal regime at the base. Subsequently, carbonate platforms backstep against the shallow-dipping northern flank, while platforms only develop on the steep southern flank when a firm wide shallow-marine substrate is provided by a bench on the footwall block. The energy of the environment decreases with increased flooding of the strait area.Third-order sequences and higher-order parasequences have been identified in each transect and correlated between transects. Correlations were made using biostratigraphic data and high-resolution sequence stratigraphy in combination with the construction of the relative sea-level curve for each site. The third-order highstands are stacked in a proximal position and separated by exposure surfaces, while the lowstands, deposited in a distal setting, are separated by deep-marine (offshore or subphotic) deposits. The parasequences produce dominantly aggradational and progradational geometries with transgressive ravinement surfaces and exposure surfaces developing at times. Reconstruction of the depositional profile shows that the third-order sequences are driven by relative sea-level oscillations of 100–150 m, and that these may be attributed to 400-Ka orbital eccentricity cycles. The parasequences are driven by eustatic 20–30 m sea-level oscillations, which may be attributed to the 100-Ka orbital eccentricity cycles.The isolated carbonate build-ups in the Pirinç and Alahan transects develop at the same time as bioclastic tidal deposits in the Silifke area during the transgression of sequence 1. This is caused by a difference in hydrodynamic regime: a direct result of basin morphology funneling tidal currents in the Silifke area. We also demonstrate how during the highstands a siliciclastic delta system progrades in the Alahan area, while only 12 km to the east, a fringing carbonate platform develops, showing how siliciclastic input can have a very localised effect on carbonate environments.The exceptional quality of the outcrops with its variety of environments and its location at the Tethyan margin make this site a good candidate for a reference model for Burdigalian reef and platform architectures.  相似文献   

20.
This study utilized three-dimensional exposures to evaluate how sea-level position and palaeotopography control the facies and geometries of heterozoan carbonates. Heterozoan carbonates were deposited on top of a Neogene volcanic substrate characterized by palaeotopographic highs, palaeovalleys, and straits that were formed by subaerial erosion, possibly original volcanic topography, and faults prior to carbonate deposition. The depositional sequence that is the focus of this study (DS1B) consists of 7–10 fining upward cycles that developed in response to relative sea-level fluctuations. A complete cycle has a basal erosion surface overlain by deposits of debrisflows and high-density turbidity currents, which formed during relative sea-level fall. Overlying tractive deposits most likely formed during the lowest relative position of sea level. Overlying these are debrites grading upward to high-density turbidites and low-density turbidites that formed during relative sea-level rise. The tops of the cycles consist of hemipelagic deposits that formed during the highest relative position of sea level. The cycles fine upward because upslope carbonate production decreased as relative sea level rose due to less surface area available for shallow-water carbonate production and partial drowning of substrates. The cycles are dominated by two end-member types of facies associations and stratal geometries that formed in response to fluctuating sea-level position over variable substrate palaeotopography. One end-member is termed ‘flank flow cycle’ because this type of cycle indicates dominant sediment transport down the flanks of palaeovalleys. Those cycles drape the substrate, have more debrites, high-density turbidites and erosion on palaeovalley flanks, and in general, the lithofacies fine down the palaeovalley flanks into the palaeovalley axes. The second end-member is termed ‘axial flow cycle’ because it indicates a dominance of sediment transport down the axes of palaeovalleys. Those cycles are characterized by debrites and high-density turbidites in palaeovalley axes, and lap out of strata against the flanks of palaeovalleys. Where and when an axial flow cycle or flank flow cycle developed appears to be related to the intersection of sea level with areas of gentle or steep substrate slopes, during an overall relative rise in sea level. Results from this study provide a model for similar systems that must combine carbonate principles for sediment production, palaeotopographic controls, and physical principles of sediment remobilization into deep water.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号