共查询到20条相似文献，搜索用时 109 毫秒
1.
大规模超长群桩基础工作性能的数值模拟 总被引：3，自引：0，他引：3
超长桩基础在土木工程中的应用越来越多,但对其工作性状的研究相对滞后。以某超长群桩基础工程为例,用三维非线性有限元方法分析了超长单桩及群桩的工作性能。计算中桩、土和承台的有限元模型均用8节点六面体等参单元,桩-土界面用有厚度的接触面单元模拟;混凝土的应力-应变关系用线弹性模型,土体用非线性Duncan-Chang弹性模型模拟;承台施工过程用分级加荷的方法模拟,承台混凝土的硬化过程用变化模量的方法模拟。计算结果表明,超长单桩的承载性状属摩擦桩,其桩身失稳的原因是桩侧土体的破坏;在群桩基础中,不同位置基桩的工作性能不完全相同,承台周边桩的工作性能与单桩类似,而与内部桩的差别较大;现行规范中推荐的群桩效应系数和有限元计算结果间存在较大差别,表明现行规范可能不适用于超长群桩基础,对超长群桩基础的工作性能进行深入研究是必要的。 相似文献
2.
由于坡度效应的存在,常规方法并不适用于斜坡上水平受荷桩的计算,首先开展了斜坡上基桩的横向加载破坏试验,以确定斜坡上基桩的破坏模式。在此基础上,沿坡体方向对破坏土楔体进行斜向单元划分,提出了考虑坡度效应的土体应变楔模型,对于其中的关键参数应变楔深度与应变楔土体应变采用迭代求解。迭代过程中,建立基桩横向受荷的桩-土相互作用方程并用有限杆单元法求解,当求解得到的桩身地面处位移与应变楔模型中地面处土体位移之差小于某一允许值时,得到的基桩的水平位移及内力即为最终解答。通过与试验测试数据的对比,验证了该方法的合理性。最后,将土体破坏深度与边坡斜率的比值定义为陡坡效应影响范围,并对其影响因素进行了对比分析。结果表明,陡坡效应的影响范围受土体强度参数及基桩尺寸等多因素影响,其随着桩径的增加而减小,且随土体强度的增强而减小。 相似文献
3.
Tapered piles represent a more equitable distribution of the pile material in several respects. In order to study their efficiency over piles of uniform section with the same material input, a three-dimensional finite element analysis is developed. The numerical procedure accounts for the non-linear elastic behaviour of both the soil and the pile-soil interface. In order to include the latter, which involves relative slip and debonding, zero/non-zero thickness interface elements are used. Three shapes of cross-section, viz. circular, square and triangular, have been attempted for the piles. The load-settlement behaviour under axial load predicted by the analysis is compared with laboratory test results obtained on instrumented model piles, installed as ‘replacement’ piles, and the fit obtained is found to be reasonably good. Also examined are interface shear and axial force in the pile, displacement and stress fields in the medium and the progression of failure in the latter. 相似文献
4.
Piles may be subjected to lateral soil pressures as a result of lateral soil movements from nearby construction‐related activities such as embankment construction or excavation operations. Three‐dimensional finite element analyses have been carried out to investigate the response of a single pile when subjected to lateral soil movements. The pile and the soil were modelled using 20‐node quadrilateral brick elements with reduced integration. For compatibility between the soil–pile interface elements, 27‐node quadrilateral brick elements with reduced integration were used to model the soil around the pile adjacent to the soil–pile interface. A Mohr–Coulomb elastic–plastic constitutive model with large‐strain mode was assumed for the soil. The analyses indicate that the behaviour of the pile was significantly influenced by the pile flexibility, the magnitude of soil movement, the pile head boundary conditions, the shape of the soil movement profile and the thickness of the moving soil mass. Reasonable agreement is found between some existing published solutions and those developed herein. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
5.
Y. K. Chow 《国际地质力学数值与分析法杂志》1987,11(6):621-638
A numerical method of analysis based on elasticity theory is presented for the analysis of axially and laterally loaded pile groups embedded in nonhomogeneous soils. The problem is decomposed into two systems, namely the group piles acted upon by external applied loads and pile–soil interaction forces, and a layered soil continuum acted upon by a system of pile–soil interaction forces at the imaginary positions of the piles. The group piles are discretized into discrete elements while the nonhomogeneous soil behaviour is determined from an economically viable finite element procedure. The load–deformation relationship of the pile group system is then determined by considering the equilibrium of the pile–soil interaction forces, and the compatibility of the pile and soil displacements. The influence of soil nonlinearity can be studied by limiting the soil forces at the pile–soil interface, and redistributing the ‘excess forces’ by an ‘initial stress’ process popular in elasto-plastic finite element analysis. The solutions from this approach are compared with some available published solutions for single piles and pile groups in homogeneous and nonhomogeneous soils. A limited number of field tests on pile groups are studied, and show that, in general, the computed response compares favourably with the field measurements. 相似文献
6.
针对传统弹性理论法过高地估计了桩-桩相互作用效应,基于杆件有限单元法建立了半无限土体中群桩基础的桩侧剪应力求解方程,通过简化桩-桩的相互作用效应,将群桩基础桩侧摩阻力的求解方程近似解耦,实现了群桩基础桩身剪应力和位移的快速求解目标。通过两桩相互作用系数以及柔性承台下群桩基础差异沉降的对比分析,验证了该简化方法的合理性。参数分析结果表明,该简化方法计算得到的相互作用系数与严格的边界积分方程法解答较为接近,稍小于Poulos弹性理论法的计算结果;柔性承台下群桩的差异沉降在桩间距较小时与经典解答较为接近,而在桩间距较大时则存在一定的差别。该简化方法大幅减少了群桩计算工作量,适用于大规模群桩基础的快速计算要求。 相似文献
7.
In modeling of many geomechanics problems such as underground openings, soil-foundation structure interaction problems, and in wave propagation problems through semi-infinite soil medium the soil is represented as a region of either infinite or semi-infinite extent. Numerical modeling of such problems using conventional finite elements involves a truncation of the far field in which the infinite boundary is terminated at a finite distance. In these problems, appropriate boundary conditions are introduced to approximate the solution of the infinite or semi-infinite boundaries as closely as possible. However, the task of positioning the finite boundary in conventional finite element discretization and the definition of the boundary and its conditions is very delicate and depends on the modeller's skill and intuition. Moreover, such a choice is influenced by the size of the domain to be discretized. Consequently, the dimensions of the global matrices and the time required for solution of the problem will increase considerably and also selection of the arbitrary location of truncated boundary may lead to erroneous result. In order to over come these problems, mapped infinite elements have been developed by earlier researchers (Simoni and Schrefier, 1987). In the present work the applicability of infinite element technique is examined for different geomechanics problems. A computer program INFEMEP is developed based on the conventional finite element and mapped infinite element technique. It is then validated using selected problems such as strip footing and circular footing. CPU time taken to obtain solutions using finite element approach and infinite element approach was estimated and presented to show the capability of coupled modeling in improving the computational efficiency. Mesh configurations of different sizes were used to explore the enhancement of both computational economy and solution accuracy achieved by incorporation of infinite elements to solve elastic and elasto-plastic problems in semi-infinite/finite domain as applied to geotechnical engineering. © Rapid Science Ltd. 1998 相似文献
8.
Pile foundations are frequently subjected to cyclic lateral loads. Wave and wind loads on offshore structures will be applied in different directions and times during the design life of a structure. Therefore, the magnitude and direction of these loads in conjunction with the dead loads should be considered. This paper investigates a loading scenario where a monotonic lateral load is applied to a pile, followed by two‐way cycling in a direction perpendicular to the initial loading. This configuration is indicative of the complexity of loading that may be considered and is referred to in the paper as ‘T‐shaped’ loading. The energy‐based numerical model employed considers two‐dimensional lateral loading in an elasto‐plastic soil, with coupled behaviour between the two perpendicular directions by local yield surfaces along the length of the pile. The behaviour of the soil–pile system subjected to different loading combinations has been divided into four categories of shakedown previously proposed for cyclic loading of structures and soils. A design chart has been created to illustrate the type of pile behaviour for a given two‐dimensional loading scenario. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
9.
A simplified method of numerical analysis based on elasticity theory has been developed for the analysis of axially and laterally loaded piled raft foundations embedded in non‐homogeneous soils and incorporated into a computer program “PRAB”. In this method, a hybrid model is employed in which the flexible raft is modelled as thin plates and the piles as elastic beams and the soil is treated as springs. The interactions between structural members, pile–soil–pile, pile–soil–raft and raft–soil–raft interactions, are approximated based on Mindlin's solutions for both vertical and lateral forces with consideration of non‐homogeneous soils. The validity of the proposed method is verified through comparisons with some published solutions for single piles, pile groups and capped pile groups in non‐homogeneous soils. Thereafter, the solutions from this approach for the analysis of axially and laterally loaded 4‐pile pile groups and 4‐pile piled rafts embedded in finite homogeneous and non‐homogeneous soil layers are compared with those from three‐dimensional finite element analysis. Good agreement between the present approach and the more rigorous finite element approach is demonstrated. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
10.
This paper presents a superposition method expanded for computing impedance functions (IFs) of inclined‐pile groups. Closed‐form solutions for obtaining horizontal, vertical, and rocking IFs, estimated by using pile‐to‐pile interaction factors, are proposed. IFs of solitary inclined piles, crossed IFs, and explicit incorporation of compatibility conditions for pile‐head movements are also appropriately taken into consideration. All of these factors should be known in advance and will be computed and shown for the most relevant cases. The accuracy of the proposed closed‐form solutions is verified for 2 × 2 and 3 × 3 square inclined‐pile groups embedded in an isotropic viscoelastic homogeneous half‐space soil medium, with hysteretic damping. The pile‐to‐pile interaction factors are computed by means of a three‐dimensional time‐harmonic boundary elements–finite elements coupling formulation. The results indicate that the IFs obtained from the proposed method are in good agreement with those obtained from the coupling formulation. Furthermore, crossed vertical‐rocking IFs of solitary piles need to be appropriately considered for obtaining rocking IFs when the number of piles is small. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
This paper presents an embedded beam formulation for discretization independent finite element (FE) analyses of interactions between pile foundations or rock anchors and the surrounding soil in geotechnical and tunneling engineering. Piles are represented by means of finite beam elements embedded within FEs for the soil represented by 3D solid elements. The proposed formulation allows consideration of piles and pile groups with arbitrary orientation independently from the FE discretization of the surrounding soil. The interface behavior between piles and the surrounding soil is represented numerically by means of a contact formulation considering skin friction as well as pile tip resistance. The pile–soil interaction along the pile skin is considered by means of a 3D frictional point‐to‐point contact formulation using the integration points of the beam elements and reference points arbitrarily located within the solid elements as control points. The ability of the proposed embedded pile model to represent groups of piles objected to combined axial and shear loading and their interactions with the surrounding soil is demonstrated by selected benchmark examples. The pile model is applied to the numerical simulation of shield driven tunnel construction in the vicinity of an existing building resting upon pile foundation to demonstrate the performance of the proposed model in complex simulation environments. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
12.
It is common in the analysis of piles under lateral loads to use a model of a beam on elastic foundation, or a finite element model with the pile represented by a one dimensional beam–column with its axis coinciding with the central line of the finite element mesh. In both cases the lateral stiffness of the pile itself, as a structural element, is a function of the product of its Young’s modulus of elasticity by the moment of inertia of the cross section (EI). For solid piles the moment of inertia is directly related to the radius but this is not the case when dealing with hollow piles where the value of the radius corresponding to a given moment of inertia is not unique. Both of the above models ignore the effect of the value of the radius of the soil cavity occupied by the pile. In this work a more accurate model of the pile with the soil around it represented. A consistent boundary matrix valid for static and dynamic analyses is used to evaluate the accuracy of the results provided by the model of a beam on elastic foundation. In addition, a 1D model of the pile is analyzed with finite elements for the soil. This analysis considers a fixed value of the product EI, but a variable radius in order to illustrate the importance of the radial dimension. Results are obtained for a pile fixed at the bottom, but long enough so that the top boundary conditions do not affect the results and for a shorter floating pile were the shear and moment at the bottom resulting from the underlying soil would not be zero. For the beam on elastic foundation model, the top of the pile was assumed to be fixed. 相似文献
13.
首先基于布西奈斯克解,将表面作用有集中荷载时半无限弹性体的应力变形解在荷载作用区域利用复合辛普森公式进行数值积分,得到了表面处于不同形式的分布荷载作用下土体自由场水平及竖直方向应力和变形的计算公式。结合有限差分法及Mindlin位移解分别推导出弹性地基中桩顶作用有集中荷载时单桩桩、土单元的位移,两者结合便得到主动桩的分析方法。通过将堆载作用下的土体自由场位移施加于桩上把上述自由场分析及主动桩分析结合起来,推导出堆载作用下被动单桩的竖向和水平向承载特性的分析方法。选取地表附近作用有矩形均布荷载的计算工况,通过与有限元计算结果的对比验证了所提出的分析方法的正确性;将所提出的方法计算结果与某处工程案例中实测数据结果进行对比,分析表明利用该方法分析堆载对邻近桩基的水平及竖向影响是合理可靠的。 相似文献
14.
Humberto Yáñez-Godoy Abdelhammid Mokeddem Sidi Mohammed Elachachi 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2017,11(4):299-314
The uncertainty in terms of soil characterisation is studied to assess its effect on the structural behaviour of extended structures as sheet pile walls. A finite element model is used. This integrates a numerical model of the soil–structure interaction together with a stochastic model that allows characterising the soil variability. The model serves in propagating the variability and the system parameter uncertainties. Discussion is mainly focused on two points: (1) testing the sensitivity of the structural behaviour of a sheet pile wall to different geotechnical parameters and (2) assessing the influence of spatial variability of soil properties on the structural behaviour by identifying the most sensitive geotechnical parameter and the most significant correlation length values. The findings showed that in assessing the sheet pile wall’s structural behaviour, there are spatial variability parameters that cannot be considered negligible. In this study, soil friction angle is found to be an important parameter. 相似文献
15.
考虑流变与固结效应的桩筏基础-地基共同作用分析 总被引：2，自引：0，他引：2
土的流变性与地基固结的综合作用,导致了上部结构与地基变形的时效性,并呈现出明显的非线性,对桩筏基础与地基共同作用的工作机理及其工作性能产生重要影响。为此,采用弹黏塑性流变模型考虑土的流变特性,通过有限元方法数值求解Biot耦合固结方程,对桩筏基础与地基共同作用的时间效应问题进行了非线性数值分析。通过算例计算,对加载后桩筏基础荷载分配和沉降特性及下覆土层中孔隙水压力的扩散和消散规律进行了探讨。研究表明,地基孔隙水压力的增长和消散不仅具有Mandel-Cryer效应,而且依赖于土的流变变形,尤其在排水条件较差时更为明显。因此,在分析桩筏基础内力变形的时效性时必须考虑土的流变性与地基的固结作用的联合效应。 相似文献
16.
A finite element model for pile‐driving analysis is developed and used to investigate the behaviour of pre‐bored piles, which are then driven the last 1.25 or 2.25 m to their final design depth. The study was conducted for the case of saturated clays. The model traces the penetration of the pile into the soil and accommodates for large deformations. The non‐linear behaviour of the clay in this study is predicted using the bounding‐surface‐plasticity model, as applied to isotropic cohesive soils. The details of the 3‐D numerical modelling and computational schemes are presented. A significant difference was observed in the pile displacement during driving, and in the computed soil resistance at the pile tip, particularly at the earliest driving stages. No difference in soil resistance at the soil pile interface along the pile shaft was detected between the pre‐bored piles whether driven 1.25 or 2.25 m. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
17.
In geotechnical engineering, numerical analysis of pile capacity is often performed in such a way that piles are modeled using only the geometry of their final position in the ground and simply loaded to failure. In these analyses, the stress changes caused by the pile installation are neglected, irrespective of the installation method. For displacement piles, which are either pushed or hammered into the ground, such an approach is a very crude simplification. To model the entire installation process of displacement piles a number of additional nonlinear effects need to be considered. As the soil adjacent to the pile is displaced significantly, small deformation theory is no longer applicable and a large deformation finite element formulation is required. In addition, the continuously changing interface between the pile and the soil has to be considered. Recently, large deformation frictional contact has been used to model the pile installation and cone penetration processes. However, one significant limitation of the analysis was the use of linear elements, which have proven to be less accurate than higher order elements for nonlinear materials such as soils.
This paper presents a large deformation frictional contact formulation which can be coupled consistently with quadratic solid elements. The formulation uses the so-called mortar-type discretisation of the contact surfaces. The performance of this contact discretisation technique is demonstrated by accurately predicting the stress transfer between the pile and the soil surfaces. 相似文献
18.
Three-dimensional (3D) numerical analyses have been carried out to study the behaviour of a single pile to adjacent tunnelling in the lateral direction of the pile. The numerical analyses have included comparisons between the current study, previous elastic solutions and advanced 3D elasto-plastic analyses. In the numerical analyses, the interaction between the tunnel, the pile and the soil next to the pile has been analysed. The study includes the axial force distributions on the pile, the relative shear displacement between the pile and the soil, the shear stresses at the soil next to the pile and the pile settlement. In particular, the shear stress transfer mechanism along the pile related to tunnel advancement has been analysed by using interface elements allowing soil slip. It has been found that existing solutions may not accurately estimate the pile behaviour since several key issues are not included. Due to changes in the relative shear displacement between the pile and the soil next to the pile with tunnel advancement, the shear stresses and axial force distributions along the pile change drastically. Downward shear stress develops at the upper part of the pile, while upward shear stress is mobilised at the lower part of the pile, resulting in a compressive force on the pile. A maximum compressive force of about 0.25–0.52Pa was developed on the pile, solely due to tunnelling, depending on the pile tip locations relative to the tunnel position, where Pa is the service pile loading prior to tunnelling. The majority of the axial force on the pile developed within ±2D in the transverse direction (behind and ahead of piles) relative to the pile position, where D is the tunnel diameter. In addition, mobilisation of shear strength at the pile–soil interface was found to be a key factor governing pile–soil–tunnelling interaction. The reduction of apparent allowable pile capacity due to tunnelling was dependent on the pile location relative to the tunnel position. Some insights into the pile behaviour in tunnelling obtained from the numerical analyses will be reported and discussed. 相似文献
19.
砂土地基斜桩水平承载特性p-y曲线法 总被引：2，自引：0，他引：2
基于Reese建议的砂土p-y曲线,提出了适用于斜桩水平承载特性分析的修正p-y曲线及相应的有限元分析方法。根据桩前土体受力特点,假设桩前浅层土体达到极限破坏状态时桩侧被动破坏区为一个三维楔形体,采用极限平衡分析方法导出了斜桩桩侧极限土抗力表达式,对比研究了斜桩倾角、桩-土界面摩擦系数等因素对极限土抗力的影响规律,并给出了斜桩初始地基反力模量确定方法。在此基础上,修正Reese提出的直桩p-y曲线,提出了砂土地基中斜桩p-y曲线确定方法。利用虚功原理,导出了斜桩水平承载特性分析的有限单元列式,编制相应的分析程序,通过算例验证了方法的合理性和有效性。最后,采用修正的p-y曲线法对一离心机模型试验进行了模拟分析,结果表明,计算与试验结果吻合得很好 相似文献