首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Plate boundary geometry likely has an important influence on crustal production at mid-ocean ridges. Many studies have explored the effects of geometrical features such as transform offsets and oblique ridge segments on mantle flow and melting. This study investigates how triple junction (TJ) geometry may influence mantle dynamics. An earlier study [Georgen, J.E., Lin, J., 2002. Three-dimensional passive flow and temperature structure beneath oceanic ridge-ridge-ridge triple junctions. Earth Planet. Sci. Lett. 204, 115–132.] suggested that the effects of a ridge–ridge–ridge configuration are most pronounced under the branch with the slowest spreading rate. Thus, we create a three-dimensional, finite element, variable viscosity model that focuses on the slowest-diverging ridge of a triple junction with geometry similar to the Rodrigues TJ. This spreading axis may be considered to be analogous to the Southwest Indian Ridge. Within 100 km of the TJ, temperatures at depths within the partial melting zone and crustal thickness are predicted to increase by ~ 40 °C and 1 km, respectively. We also investigate the effects of differential motion of the TJ with respect to the underlying mantle, by imposing bottom model boundary conditions replicating (a) absolute plate motion and (b) a three-dimensional solution for plate-driven and density-driven asthenospheric flow in the African region. Neither of these basal boundary conditions significantly affects the model solutions, suggesting that the system is dominated by the divergence of the surface places. Finally, we explore how varying spreading rate magnitudes affects TJ geodynamics. When ridge divergence rates are all relatively slow (i.e., with plate kinematics similar to the Azores TJ), significant along-axis increases in mantle temperature and crustal thickness are calculated. At depths within the partial melting zone, temperatures are predicted to increase by ~ 150 °C, similar to the excess temperatures associated with mantle plumes. Likewise, crustal thickness is calculated to increase by approximately 6 km over the 200 km of ridge closest to the TJ. These results could imply that some component of the excess volcanism observed in geologic settings such as the Terceira Rift may be attributed to the effects of TJ geometry, although the important influence of features like nearby hotspots (e.g., the Azores hotspot) cannot be evaluated without additional numerical modeling.  相似文献   

2.
Thermal state, rheology and seismicity in the pannonian basin, Hungary   总被引：1，自引：0，他引：1  
On the basis of data on crustal structure and terrestrial heat flow, a 3-D geothermal model for the lithosphere in the Pannonian basin, Hungary, has been calculated. This model, together with information on crustal composition, laboratory data on rock friction, and certain assumptions about fluid conditions and strain-rate levels within the lithosphere, has been used to construct a rheological model of the area.The results obtained show a layered rheological structure where an aseismic part of the crust is “sandwiched” between an upper and a lower seismogenic crustal layers. According to the proposed rheological model, seismic activity in the upper crust may be expected down to depths of 10–12 km, which is confirmed well by the observed depth distribution of seismicity. The model also predicts a lower crustal seismogenic layer down to 20–22 km. Because of infrequent occurrences of deep earthquakes and/or a generally small number of reliable hypocenter depth determinations in the study area, this seismogenic zone is less constrained by observations.The depth of the different rheologic horizons within the crust is governed mainly by thermal conditions. The lower boundary of both seismogenic layers appears isothermal. Brittle-ductile transition in the upper crust coincides with the ˜200 °C isotherm, while in the lower crust it coincides with the ˜ 375 °C isotherm. The lowermost crust and the upper mantle beneath Hungary show ductile behavior, thus the possibility of siesmic activity at these horizons can be excluded.  相似文献   

3.
We document the thermal record of breakup of the conjugate Rio Muni (West Africa) and NE Brazil margins using apatite fission track analysis, vitrinite reflectance data and stratigraphic observations from both margins. These results permit determination of the timing of four cooling episodes, and the temperature of samples at the onset of each episode. All samples are interpreted to have experienced higher temperatures in the geological past due to i) elevated basal heatflow (palaeogeothermal gradient in Rio Muni-1 well decaying from 58 °C/km during the Mid Cretaceous to 21.5 °C/km in the Late Cenozoic) and ii) progressive exhumation from formerly greater burial depth. A well constrained history of changing palaeogeothermal gradient allows for much more precise quantification of the thickness of eroded section (exhumation) than if a constant heatflow is assumed. Cooling episodes identified from the palaeotemperature data at 110–95 Ma (both margins) and 85–70 Ma (Rio Muni only) coincide with major unconformities signifying, respectively, the cessation of rifting (breakup) and compressional shortening that affected the African continent following the establishment of post-rift sedimentation (drift). The interval between these separate unconformities is occupied by allochthonous rafts of shallow-water carbonates recording gravitational collapse of a marginal platform. The rift shoulder uplift that triggered this collapse was enhanced by local transpression associated with the obliquely divergent Ascension Fracture Zone, and thermal doming due to the coeval St Helena and Ascension Plumes. The data also reveal a c.45–35 Ma cooling episode, attributed to deep sea erosion at the onset of Eo-Oligocene ice growth, and a c.15–10 Ma episode interpreted as the record of Miocene exhumation of the West African continental margin related to continent-wide plume development. Integration of thermal history methods with traditional seismic- and stratigraphy-based observations yields a dynamic picture of kilometre-scale fluctuations in base level through the breakup and early drift phases of development of these margins. Major unconformities at ocean margins are likely to represent composite surfaces recording not only eustasy, but also regional plate margin-generated deformation, local ‘intra-basinal’ reorganization, and the amplifying effect of negative feedbacks between these processes.  相似文献   

4.
In the subglacial eruption at Gjálp in October 1996 a 6 km long and 500 m high subglacial hyaloclastite ridge was formed while large volumes of ice were melted by extremely fast heat transfer from magma to ice. Repeated surveying of ice surface geometry, measurement of inflow of ice, and a full Stokes 2-D ice flow model have been combined to estimate the heat output from Gjálp for the period 1996–2005. The very high heat output of order 106 MW during the eruption was followed by rapid decline, dropping to  2500 MW by mid 1997. It remained similar until mid 1999 but declined to 700 MW in 1999–2001. Since 2001 heat output has been insignificant, probably of order 10 MW. The total heat carried with the 1.2 × 1012 kg of basaltic andesite erupted (0.45 km3 DRE) is estimated to have been 1.5 × 1018 J. About two thirds of the thermal energy released from the 0.7 km3 edifice in Gjálp occurred during the 13-day long eruption, 20% was released from end of eruption until mid 1997, a further 10% in 1997–2001, and from mid 2001 to present, only a small fraction remained. The post-eruption heat output history can be reconciled with the gradual release of 5 × 1017 J thermal energy remaining in the Gjálp ridge after the eruption, assuming single phase liquid convection in the cooling edifice. The average temperature of the edifice is found to have been approximately 240 °C at the end of the eruption, dropping to  110 °C after 9 months and reaching  40 °C in 2001. Although an initial period of several months of very high permeability is possible, the most probable value of the permeability from 1997 onwards is of order 10− 12 m2. This is consistent with consolidated/palagonitized hyaloclastite but incompatible with unconsolidated tephra. This may indicate that palagonitization had advanced sufficiently in the first 1–2 years to form a consolidated hyaloclastite ridge, resistant to erosion. No ice flow traversing the Gjálp ridge has been observed, suggesting that it has effectively been shielded from glacial erosion in its first 10 years of existence.  相似文献   

5.
We report an 39Ar–40Ar age determination of a whole rock sample of the olivine-rich, martian meteorite Northwest Africa (NWA) 2737. Those extractions releasing 0–48% of the 39Ar define an 39Ar–40Ar isochron age of 160–190 Ma, when evaluated in various ways. Higher temperature extractions show increasing ages that eventually exceed the reported Sm–Nd age of 1.42 Ga. At least part of this excess 40Ar may have been shock implanted from the martian atmosphere. We considered two possible interpretations of the Ar–Ar isochron age, utilizing the measured Ar diffusion characteristics of NWA 2737 and a thermal model, which relates Ar diffusion to the size of a cooling object after shock heating. One interpretation, that 40Ar was only partially degassed by an impact event ~ 11 Ma ago (the CRE age), appears possible only if NWA 2737 was shock-heated to temperatures > 600 °C and was ejected from Mars as an object a few 10 s of cm in diameter. The second interpretation, which we prefer, is that NWA experienced an earlier, more intense shock event, which left it residing in a warm ejecta layer, and a less intense event ~ 11 Ma ago, which ejected it into space. Our evaluation would require NWA 2737 to have been heated by this first event to a temperature of ~ 300–500 °C and buried in ejecta to a depth of ~ 1–20 m. These conclusions are compared to model constraints on meteorite ejection from Mars reported in the literature. The second, Mars-ejection impact ~ 11 Ma ago probably heated NWA 2737 to no more than ~ 400 °C. NWA 2737 demonstrates that some martian meteorites probably experienced shock heating in events that did not eject them into space.  相似文献   

6.
We take a fresh look at the topography, structure and seismicity of the Ganges–Brahmaputra Delta (GBD)–Burma Arc collision zone in order to reevaluate the nature of the accretionary prism and its seismic potential. The GBD, the world's largest delta, has been built from sediments eroded from the Himalayan collision. These sediments prograded the continental margin of the Indian subcontinent by  400 km, forming a huge sediment pile that is now entering the Burma Arc subduction zone. Subduction of oceanic lithosphere with > 20 km sediment thickness is fueling the growth of an active accretionary prism exposed on land. The prism starts at an apex south of the GBD shelf edge at  18°N and widens northwards to form a broad triangle that may be up to 300 km wide at its northern limit. The front of the prism is blind, buried by the GBD sediments. Thus, the deformation front extends 100 km west of the surface fold belt beneath the Comilla Tract, which is uplifted by 3–4 m relative to the delta. This accretionary prism has the lowest surface slope of any active subduction zone. The gradient of the prism is only  0.1°, rising to  0.5° in the forearc region to the east. This low slope is consistent with the high level of overpressure found in the subsurface, and indicates a very weak detachment. Since its onset, the collision of the GBD and Burma Arc has expanded westward at  2 cm/yr, and propagated southwards at  5 cm/yr. Seismic hazard in the GBD is largely unknown. Intermediate-size earthquakes are associated with surface ruptures and fold growth in the external part of the prism. However, the possibility of large subduction ruptures has not been accounted for, and may be higher than generally believed. Although sediment-clogged systems are thought to not be able to sustain the stresses and strain-weakening behavior required for great earthquakes, some of the largest known earthquakes have occurred in heavily-sedimented subduction zones. A large earthquake in 1762 ruptured  250 km of the southern part of the GBD, suggesting large earthquakes are possible there. A large, but poorly documented earthquake in 1548 damaged population centers at the northern and southern ends of the onshore prism, and is the only known candidate for a rupture of the plate boundary along the subaerial part of the GBD–Burma Arc collision zone.  相似文献   

7.
The seismogenic zone of subduction thrust faults   总被引：13，自引：0，他引：13  
Abstract Subduction thrust faults generate earthquakes over a limited depth range. They are aseismic in their seaward updip portions and landward downdip of a critical point. The seaward shallow aseismic zone, commonly beneath accreted sediments, may be a consequence of unconsolidated sediments, especially stable-sliding smectite clays. Such clays are dehydrated and the fault may become seismogenic where the temperature reaches 100--150°C, that is, at a 5--15 km depth. Two factors may determine the downdip seismogenic limit. For subduction of young hot oceanic lithosphere beneath large accretionary sedimentary prisms and beneath continental crust, the transition to aseismic stable sliding is temperature controlled. The maximum temperature for seismic behavior in crustal rocks is ～ 350°C, regardless of the presence of water. In addition, great earthquake ruptures initiated at less than this temperature may propagate with decreasing slip to where the temperature is ～ 450°C. For subduction beneath thin island arc crust and beneath continental crust in some areas, the forearc mantle is reached by the thrust shallower than the 350°C temperature. The forearc upper mantle probably is aseismic because of stable-sliding serpentinite hydrated by water from the underthrusting oceanic crust and sediments. For many subduction zones the downdip seismogenic width defined by these limits is much less than previously assumed. Within the narrowly defined seismic zone, most of the convergence may occur in earthquakes. Numerical thermal models have been employed to estimate temperatures on the subduction thrust planes of four continental subduction zones. For Cascadia and Southwest Japan where very young and hot plates are subducting, the downdip seismogenic limit on the subduction thrust is thermally controlled and is shallow. For Alaska and most of Chile, the forearc mantle is reached before the critical temperature, and mantle serpentinite provides the limit. In all four regions, the seismogenic zones so defined agree with estimates of the extent of great earthquake rupture, and with the downdip extent of the interseismic locked zone.  相似文献   

8.
A high-resolution sea surface temperature and paleoproductivity reconstruction on a sedimentary record collected at 36°S off central-south Chile (GeoB 7165-1, 36°33′S, 73°40′W, 797 m water depth, core length 750 cm) indicates that paleoceanographic conditions changed abruptly between 18 and 17 ka. Comparative analysis of several cores along the Chilean continental margin (30°–41°S) suggests that the onset and the pattern of deglacial warming was not uniform off central-south Chile due to the progressive southward migration of the Southern Westerlies and local variations in upwelling. Marine productivity augmented rather abruptly at 13–14 ka, well after the oceanographic changes. We suggest that the late deglacial increase in paleoproductivity off central-south Chile reflects the onset of an active upwelling system bringing nutrient-rich, oxygen-poor Equatorial Subsurface Water to the euphotic zone, and a relatively higher nutrient load of the Antarctic Circumpolar Current. During the Last Glacial Maximum, when the Southern Westerlies were located further north, productivity off central-south Chile, in contrast to off northern Chile, was reduced due to direct onshore-blowing winds that prevented coastal upwelling and export production.  相似文献   

9.
We report here crustal shear-wave anisotropy, ranging from 1% to 10.76% with an average of 2.4% in the aftershock zone of the 2001 Bhuj earthquake, Gujarat, India, from a study of leading shear-wave polarization directions (LPSDs), which vary on average from NNW–SSE to E–W with a delay of 0.07–0.14 s. The delays in the NNW–SSE to NE–SW directions observed at seven stations, near the seismogenic fault, suggest cracks parallel to the direction of the maximum horizontal regional compressional stress prevailing in the region, suggesting a dilatancy-induced anisotropy resulting from approximately stress-aligned parallel vertical micro-cracks. In contrast, the LPSDs at Ramvav, Rapar and Vondh stations, away from the seismogenic fault, are fault parallel, approximately E–W and almost orthogonal to the stress-aligned polarizations inferred elsewhere. The maximum average time delay of 0.14 s is observed at Lodai, where the fast polarization direction is found to be N338°W. This has been observed from anisotropic poro-elastic (APE) modelling and observations that these are 90° flips in shear-wave polarization, resulting from propagation through micro-cracks containing fluids at critically high pore-fluid pressure surrounding the hypocenter of the 2001 mainshock. The presence of high pore-fluid pressure in the seismogenic fault zone could also explain the observed scatter in shear-wave time delays. Further, the coincidence of the N–S trending intrusive bodies (as inferred from tomographic studies in the area) with the N–S direction of regional maximum horizontal compressional stress supports the interpretation of stress-aligned vertical extensive-dilatant anisotropic (EDA) cracks. The depth distribution of the estimated anisotropy (1–10.76%), b-values and stress drop values suggests an increase at 18–30 km depths, which could be attributed to high pore-fluid pressures resulting from a fluid-filled fractured rock matrix or open micro-cracks (characterized by high crack density and high porosity) coinciding with a low velocity zone (at 18–30 km depths) as delineated from tomographic studies in the area.  相似文献   

10.
Pargasite commonly occurs in the dacitic groundmass of the 1991–1995 eruption products of Unzen volcano. We described the occurrence and chemical compositions of amphibole in the dacite, and also carried out melting experiments to determine the low-pressure stability limit of amphibole in the dacite. The 1991–1995 ejecta of the Unzen volcano show petrographic evidence of magma mixing, such as reverse compositional zoning of plagioclase and amphibole phenocrysts, and we used a groundmass separate as a starting material for the experiments. Reversed experiments show that the maximum temperature for the crystallization of amphibole is 930°C at 196 MPa, 900°C at 98 MPa, and 820°C at 49 MPa. Compared with the experimental results on the Mount St. Helens dacite, present experiments on the Unzen dacitic groundmass show that amphibole is stable to pressures ca. 50 MPa lower at 850°C. Available Fe–Ti oxide thermometry indicates the crystallization temperature of the groundmass of the Unzen dacite to be 880±30°C, suggesting that the groundmass pargasite crystallized at >70 MPa, corresponding to a depth of more than 3 km in the conduit. The chlorine content of the groundmass pargasite is much lower than that of phenocrystic magnesiohornblende in the 1991–1995 dacite of Unzen volcano, indicating that vesiculation/degassing of magma took place before the crystallization of the groundmass pargasite. The present study shows that the magma was water oversaturated and that the degassing of magma along with magma mixing caused crystallization of the groundmass amphibole at depths of more than 3 km in the conduit.  相似文献   

11.
The centroid-moment tensor solutions of more than 300 earthquakes that occurred in the Himalayas and its vicinity regions during the period of 1977–1996 are examined. The resultant seismic moment tensor components of these earthquakes are estimated. The Burmese arc region shows prominent east–west compression and north–south extension with very little vertical extension. Northeast India and Pamir–Hindu Kush regions show prominent vertical extension and east–west compression. The Indian plate is subducting eastward beneath the northeast India and Burmese arc regions. The overriding Burmese arc has overthrust horizontally with the underthrusting Indian plate at a depth of 20–80 km and below 80 km depth, it has merged with the Indian plate making “Y” shape structure and as a result the aseismic zone has been formed in the region lying between 26°N–28°N and 91.5°E–94°E at a depth of 10–50 km. Similarly, the Indian plate is underthrusting in the western side beneath the Pamir–Hindu Kush region and the overriding Eurasian plate has overthrust it to form a “Y” shape structure at a depth of 10–40 km and below 60 km depth, it has merged with the Indian plate and both the plates are subducting below 60–260 km depth. Further south, the overriding Eurasian plate has come in contact with the Indian plate at a depth of 20–60 km beneath northwest India and Pakistan regions with left lateral strike slip motion.  相似文献   

12.
The role of hotter than ambient plume mantle in the formation of a rifted volcanic margin in the northern Arabian Sea is investigated using subsidence analysis of a drill site located on the seismically defined Somnath volcanic ridge. The ridge has experienced > 4 km of subsidence since 65 Ma and lies within oceanic lithosphere. We estimate crustal thickness to be 9.5–11.5 km. Curiously < 400 m of the thermal subsidence occurred prior to 37 Ma, when subsidence rates would normally be at a maximum. We reject the hypothesis that this was caused by increasing plume dynamic support after continental break-up because the size of the thermal anomalies required are unrealistic (> 600 °C), especially considering the rapid northward drift of India relative to the Deccan-Réunion hotspot. We suggest that this reflects very slow lithospheric growth, possibly caused by vigorous asthenospheric convection lasting > 28 m.y., and induced by the steep continent–ocean boundary. Post-rift slow subsidence is also recognized on volcanic margins in the NE Atlantic and SE Newfoundland and cannot be used as a unique indicator of plume mantle involvement in continental break-up.  相似文献   

13.
On the evolution of the geothermal regime of the North China Basin   总被引：1，自引：0，他引：1  
Recent heat flow and regional geothermal studies indicate that the North China Basin is characterized by relatively high heat flow compared with most stable areas in other parts of the world, but lower heat flow than most active tectonic areas. Measured heat flow values range from 61 to 74 mW m−2. The temperature at a depth of 2000 m is generally in the range 75 to 85°C, but sometimes is 90°C or higher. The geothermal gradient in Cenozoic sediments is in the range 30 to 40°C/km for most of the area. The calculated temperature at the Moho is 560 and 640°C for surface heat flow values of 63 and 71 mW m−2, respectively. These thermal data are consistent with other geophysical observations for the North China Basin. Relatively high heat flow in this area is related to Late Cretaceous-Paleogene rifting as described in this paper.  相似文献   

14.
A dacitic magma (64.5 wt.% SiO2), a mixture of phenocryst-rich rhyodacite and an aphyric mafic magma, was erupted during the recent 1991–1995 Mount Unzen eruptive cycle. The experimental and analytical results of this study reveal additional details about conditions in the premixing and postmixing magmas, and the nature of the mixing process. The preeruption rhyodacitic magma was at a temperature of 790±20°C according to Fe–Ti oxide phenocryst cores, and at a depth of 6 to 7 km (160 MPa) according to Al-in-hornblende geobarometry. The mafic magma that mixed with the rhyodacite is found as andesitic (54 to 62 wt.% SiO2) enclaves in the erupted magma and was essentially aphyric when intruded. Phase equilibria indicate that an aphyric andesite at 160 MPa is >1030°C (H2O-saturated) and possibly as high as 1130°C (2 wt.% H2O). The composition of the rhyodacite which was mixed with the andesite is estimated to lie between 67 and 69 wt.% SiO2. Using these compositions and temperatures, the temperature of the Unzen magma after mixing is estimated to be at least 850° to 870°C. The groundmass Fe–Ti oxide microphenocrysts and those in pargasite-bearing reaction zones around biotite phenocrysts both give 890±20°C temperatures; the oxide–oxide contacts give temperatures of 910±20°C. The 900±30°C postmixing temperatures are consistent with phase-equilibria experiments which show that the magma was not above 930°C at 160 MPa. Our Fe–Ti oxide reequilibration experiments suggest that the mixing of the two magmas began within a few weeks of the eruption, which is a shorter time than is calculated using available diffusion data. There is also evidence that some mixing took place much closer to the time of extrusion based on the presence of unrimmed biotite phenocrysts in the magma.  相似文献   

15.
Basic properties of the mid-latitude traveling ionospheric disturbances (TIDs) during the maximum phase of a major magnetic storm of 6–8 April 2000 are shown. Total electron content (TEC) variations were studied by using data from GPS receivers located in Russia and Central Asia. The nightglow response to this storm at mesopause and termospheric altitudes was also measured by optical instruments FENIX located at the observatory of the Institute of Solar-Terrestrial Physics (51.9°N,103.0°E), and MORTI located at the observatory of the Institute of Ionosphere (43.2°N, 77.0°E). Observations of the O (557.7 and 630.0 nm) emissions originating from atmospheric layers centered at altitudes of 90 and 250 km were carried out at Irkutsk and of the O2(b1∑g+−X3∑g−) (0-1) emission originating from an atmospheric layer centered at altitude of 94 km was carried out at Almaty. Our radio and optical measurement network observed a storm-induced solitary large-scale wave with duration of 1 h and a wave front width of no less than 5000 km, while it traveled equatorward with a velocity of 200 m/s from 62°N to 38°N geographic latitude. The TEC disturbance, basically displaying an electron content depression in the maximum of the F2 region, reveals a good correlation with growing nightglow emission, the temporal shift between the TEC and emission variation maxima being different for different altitudes. A comparison of the auroral oval parameters with dynamic spectra of TEC variations and optical 630 nm emissions in the frequency range 0.4–4 mHz (250–2500 s periods) showed that as the auroral oval expands into mid-latitudes, also does the region with a developed medium-sale and small-scale TEC structure.  相似文献   

16.
Algiers city is located in a seismogenic zone. To reduce the impact of seismic risk in this Capital city, a realistic modelling of the seismic ground motion (SGM) is conducted by using the hybrid method that combines the finite differences method and the modal summation. For this purpose, a complete database of geological, geophysical and earthquake data is constructed. A critical re-appraisal of the seismicity of the zone [2.25°E–3.50°E, 36.50°N–37.00°N] is performed and an earthquake list, for the period 1359–2002, is compiled. The analysis of existing and newly retrieved macroseismic information allowed the definition of earthquake parameters of macroseismic events for which a degree of reliability is assigned. Geological cross sections have been built up to model the SGM in the city, caused by the 1989 Mont-Chenoua and the 1924 Douéra earthquakes. Synthetic seismograms and response spectral ratio is produced for Algiers, and they show that the soft sediments in Algiers centre are responsible of the noticed amplification of the SGM.  相似文献   

17.
  相似文献   

18.
We carried out viscosity measurements and sampling of a crystal suspension derived from alkali olivine basalt from the Matsuura district, SW Japan, at subliquidus temperatures from 1230 °C to 1140 °C under 1 atm with NNO oxygen buffered conditions. Viscosity increased from 31 to 1235 Pa s with a decrease in temperature from 1230 to 1140 °C. On cooling, olivine first appeared at 1210 °C, followed by plagioclase at 1170 °C. The crystal content of the sample attained 31 vol.% at 1140 °C (plagioclase 22%, olivine 9%). Non-Newtonian behaviors, including thixotropy and shear thinning, were pronounced in the presence of tabular plagioclase crystals. The cause of such behavior is discussed in relation to shear-induced changes in melt–crystal textures. Relative viscosities, ηr (= ηs / ηm, where ηs and ηm are the viscosities of the suspension and the melt, respectively), were obtained by calculating melt viscosities from the melt composition and temperature at 1 atm using the equation proposed by Giordano and Dingwell [Giordano, D., Dingwell, D.B., 2003. Non-Arrhenian multicomponent melt viscosity: a model. Earth and Planetary Science Letters, 208, 337–349.]. The obtained relative viscosities are generally consistent with the Einstein–Roscoe relation, which represents ηr for suspensions that contain equant and equigranular crystals, even though the crystal suspension analyzed in the present experiments contained tabular plagioclase and granular olivine of various grain sizes. This consistency is attributed to the fact that the effect of crystal shape was counterbalanced by the effect of the dispersion of crystal size. The applicability of the Einstein–Roscoe equation with respect to crystal shape is discussed on the basis of the present experimental results. Our experiments and those of Sato [Sato, H., 2005. Viscosity measurement of subliquidus magmas: 1707 basalt of Fuji volcano. Journal of Mineralogical and Petrological Sciences, 100, 133–142.] show that the relationship between relative viscosity and crystal fraction is consistent with the Einstein–Roscoe relationship for axial ratios that are smaller than the critical value of 4–6.5, but discrepancies occur for higher ratios.  相似文献   

19.
New paleomagnetic investigation was carried out on the late Neogene fluviolacustrine sequence of the Yuanmou Basin, located near the southeastern margin of the Tibetan Plateau. Magnetostratigraphic results indicate nine reverse magnetozones (R1 to R9) and eight normal magnetozones (N1 to N8) in the sedimentary profile, which can be correlated to the geomagnetic polarity timescale from C3n.3r to C1r.1r. The age of the sedimentary sequence of the Yuanmou Basin can thus be paleomagnetically constrained to an interval from early Pliocene to Pleistocene, with sedimentation rates varying from 12.5 to 55 cm/kyr. In addition to its highly resolved magnetostratigraphic sequence, the Yuanmou Basin provides a record of Plio-Pleistocene tectono- and climato-sedimentary processes. The mean declinations of the seventeen polarity units (excluding samples with transitional directions) can be grouped into three distinct directional intervals, Group I (2.58–1.37 Ma), Group II (4.29–2.58 Ma) and Group III (4.91–4.29 Ma). These directions indicate that the Yuanmou Basin has probably experienced vertical-axis clockwise rotation of about 12° from 1.4 Ma to 4.9 Ma, which may be related to slip activity of the Red River fault to the southwest and the Xianshuihe–Xiaojiang fault to the east.  相似文献   

20.
The Taupo Volcanic Zone (TVZ) of New Zealand is characterised by extensive volcanism and by high rates of magma production. Associated with this volcanism are numerous high-temperature (> 250 °C) geothermal systems through which the natural heat output of 4200 ± 500 MW is channelled. Outside the geothermal fields the heat flow is negligible. The average heat flux from the central 6000 km2 of the TVZ, which contains most of the geothermal fields, is 700 mW/m3. This heat flux appears to be more concentrated along the eastern margin of the TVZ.Schlumberger resistivity measurements (AB/2 of 500 m and 1000 m) have identified 17 distinct geothermal fields with natural heat outputs greater than 20 MW. An additional six, low-heat-output geothermal fields also occur, and may represent formerly more active systems now in decline. Two extinct fields have also been identified. The average spacing between fields is 10–15 km. The distribution of geothermal fields does not appear to be directly associated with individual volcanic features except for the geothermal system that occurs within Lake Taupo and which occupies the vent of the 1800 yr.B.P. Taupo eruption. The positions of the geothermal fields do not appear to have varied for at least the last 200,000 years. These data are consistent with a model of large-scale convection occurring throughout the TVZ, in which the geothermal fields represent the upper portion of the rising, high-temperature, convective plumes. The majority of the recharge to the convection system is provided by the downward movement of cold meteoric water between the fields which suppresses the heat flow in these regions.Gravity measurements indicate that to a depth of about 2.5 km the upper layers of the TVZ consist of low-density pyroclastic infill. A seismic refraction interface with velocity change from 3.2 km/s to 5.5 km/s occurs at a similar depth. The cross-sectional area of the convection plumes (identified electrically) appears to increase at depths of 1–2 km, consistent with a decrease in permeability at the depth at which the velocity and density increase.The seismicity is dominated by swarm activity which accounts for about half of all earthquakes and is highly variable in both space and time. The small number of seismic events (and swarms) that have well determined depths show a cut off of seismicity at depths of 7–9 km. The depth of the transition from brittle to ductile behaviour of the rocks is identified with the transition from a regime where heat is transported by (hydrothermal) convection and pore pressures are near-hydrostatic to a regime where heat transport is dominantly conductive and pore pressures are lithostatic. Within the convective region, temperatures are moderated by the circulation of water so that the depth of the transition from convective to conductive heat transfer can be linked to the bottom of the seismogenic zone. Rocks must become ductile within about 1 km of the bottom of the overlying convective zone.Seismic refraction studies suggest that the crust beneath the TVZ is highly thinned with a seismic velocity of about 7.5 km/ s, typical of the upper mantle, occurring at depth of 15 km. Seismological studies indicate the upper mantle is highly attenuating beneath the TVZ. Conductive heat transfer between the bottom of the convective system, at about 8 km, and the base of the material with crustal velocities, at 15 km, is not able to provide all the heat that is discharged at the surface. Repeated intrusion from the mantle may provide the additional heat transport required.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号