共查询到20条相似文献，搜索用时 15 毫秒
1.
Microlevelling procedures applied to regional aeromagnetic data: an example from the Transantarctic Mountains (Antarctica) 总被引：1，自引：0，他引：1
The extensive application of digital enhancement and filtering as a powerful tool for aeromagnetic interpretation, not only of high resolution but also of regional data, requires an improved levelling. Two microlevelling techniques were thus compared in order to find an effective but relatively simple procedure to remove, or at least to reduce, residual magnetic errors remaining after standard levelling processes. This study was carried out on regional aeromagnetic data recently acquired at high magnetic latitudes along the Transantarctic Mountains in Antarctica, where it is particularly critical to remove time-dependent magnetic variations. Two-dimensional FFT filters applied to the gridded data, namely the Butterworth and a directional cosine filter, proved to be more effective than previously proposed one-dimensional space-domain filters in the reduction of the 'residual corrugation' not removed by statistical levelling. Tectonic interpretation of trends detected in the total field magnetic anomaly map and in the 3D analytic signal improved after application of frequency-domain microlevelling. However, we also show that when interpreting microlevelled data, two factors must be considered: (i) the possible presence of real geological trends aligned along the flight lines; (ii) modifications in the results yielded by depth estimates of magnetic sources due to the FFT filters applied during the microlevelling procedure. Such changes were seen both in the well-established 2D FFT method, based on the slope of the energy spectrum, and in the more recent 3D Euler deconvolution technique. Overall our results indicate that microlevelling could profitably be applied to older gridded aeromagnetic data sets in Antarctica, thus improving the accuracy and geological significance of future regional magnetic compilations, as already seen in other continents. 相似文献
2.
中国航磁异常管理信息系统开发与建设 总被引：3，自引：4，他引：3
航磁异常管理信息系统是采用GIS可视化技术及数据库技术在MAPGIS软件系统平台上建立的信息管理系统，它能够完成航磁异常的可视化检索、统计、属性编辑和图形显示，并实现检索结构数据的自动成图。首次建立的航磁异常信息数据库整理录入完成中国国土资源航空物探遥感中心资料室保存的20世纪80年代以前全国大部分少、市、自治区的1万多份航磁查证异常登记表和检查卡片的相关信息：航磁异常属性记录约11350条、地检异常属性记录约12870条、见矿异常属性记录约1120条，扫描及矢量化地检异常图件约7270份。本系统通过建立异常属性数据库与航磁地检异常矢量图文件、全国省级航磁数据库文件、全国航磁测量工作程度图及全国1：50万数字地理底图数据库之间合理的逻辑关系，实现了多种信息基于GIS平台与技术的统一管理和应用。 相似文献
3.
Bernhard Siemon 《Journal of Applied Geophysics》2009,67(3):206-218
For about three decades helicopter-borne electromagnetic (HEM) measurements have been used to reveal the resistivity distribution of the upper one hundred metres of the earth's subsurface. HEM systems record secondary fields, which are 3–6 orders of magnitude smaller than the transmitted primary fields. As both the primary fields and the secondary fields are present at the receivers, well-designed bucking coils are often used to reduce the primary fields at the receivers to a minimum. Remaining parts of the primary fields, the zero levels, are generally corrected by subtracting field values recorded at high altitudes (standard zero levelling) or estimated from resistivities of neighbouring lines or from resistivity maps (advanced zero levelling). These zero-levelling techniques enable the correction for long-term, quasi-linear instrumental drift. Short-term variations caused by temperature changes due to altitude variations, however, cannot be completely corrected by this procedure resulting in stripe patterns on thematic maps.Statistical methods and/or 2-D filter techniques called statistical levelling (tie-line levelling) and empirical levelling (microlevelling), respectively, used to correct stripe patterns in airborne geophysical data sets are, in general, not directly applicable to HEM data. Because HEM data levelling faces the problem that the parameter affected by zero-level errors, the secondary field, differs from the parameter generally levelled, the apparent resistivity. Furthermore, the dependency of the secondary field on both the resistivity of the subsurface and the sensor altitude is strongly nonlinear.A reasonable compromise is to microlevel both half-space parameters: apparent resistivity and apparent depth, followed by a recalculation of the secondary field components based on the half-space parameters levelled. Advantages and disadvantages of the diverse levelling techniques are discussed using a HEM data set obtained in a hilly region along the Saale River between the cities of Saalfeld and Jena in central Germany. It turns out from a comparison of apparent resistivity and apparent depth maps derived from levelled HEM data that manually advanced zero levelling of major level errors and automatic microlevelling of remaining minor level errors yield the best results. 相似文献
4.
Seismic data often contain traces that are dominated by noise; these traces should be removed (edited) before multichannel filtering or stacking. Noise bursts and spikes should be edited before single channel filtering. Spikes can be edited using a running median filter with a threshold; noise bursts can be edited by comparing the amplitudes of each trace to those of traces that are nearby in offset-common midpoint space. Relative amplitude decay rates of traces are diagnostic of their signal-to-noise (S/N) ratios and can be used to define trace editing criteria. The relative amplitude decay rate is calculated by comparing the time-gated trace amplitudes to a control function that is the median trace amplitude as a function of time, offset, and common midpoint. The editing threshold is set using a data-adaptive procedure that analyses a histogram of the amplitude decay rates. A performance evaluation shows that the algorithm makes slightly fewer incorrect trace editing decisions than human editors. The procedure for threshold setting achieves a good balance between preserving the fold of the data and removing the noisiest traces. Tests using a synthetic seismic line show that the relative amplitude decay rates are diagnostic of the traces’S/N ratios. However, the S/N ratios cannot be accurately usefully estimated at the start of processing, where noisy-trace editing is most needed; this is the fundamental limit to the accuracy of noisy trace editing. When trace equalization is omitted from the processing flow (as in amplitude-versus-offset analysis), precise noisy-trace editing is critical. The S/N ratio of the stack is more sensitive to type 2 errors (failing to reject noisy traces) than it is to type 1 errors (rejecting good traces). However, as the fold of the data decreases, the S/N ratio of the stack becomes increasingly sensitive to type 1 errors. 相似文献
5.
提出一个新的带通滤波器——延拓回返垂直二次导数,该滤波器可通过调节延拓回返高度及次数来达到调频目的,以突出勘探目标层段的信息.利用该技术对松辽盆地深层勘探程度最高的徐家围子断陷的航磁资料进行目标处理,与钻井资料对比表明,经处理后的航磁资料可以较好地反映火山岩的分布特征.以航磁资料为主结合钻井、地震资料预测了徐家围子三套火山岩的平面分布.指出航磁异常梯度带是火山岩储层的发育区带,近烃源岩或沟通烃源岩的航磁异常梯度带是火山岩天然气的富集区带.该认识对今后松辽盆地的勘探部署有着十分重要的指导意义,对我国其他地区的火山岩勘探也具有借鉴意义. 相似文献
6.
The procedure of polynomial fitting by least-squares technique to obtain the regional field from potential field data is commonly used in processing geophysical data. However, it has been found that the unguarded use of this procedure with measured field data may lead to erroneous regional fields. This is due to the fact that the least-squares technique pre-supposes a random variation of the residual or anomaly field. This condition is rarely fulfilled in measured field data where there is the common occurrence of ‘deviatory field points’ in the residual field data. In this paper, a procedure to overcome the problem using robust statistics is described with the straight-forward Downhill Simplex method used to obtain the optimum coefficients for the polynomial. The method is illustrated with aeromagnetic field data from the Mamfe basin of Nigeria and Cameroon. The result shows that the trend of the regional field obtained from robust statistics is consistent with the trend in the aeromagnetic field obtained by using the method of cross-correlation trend analysis. 相似文献
7.
The enhancement of potential field data using filters based on horizontal and vertical derivatives is common. As well as the direct use of the gradients themselves they are used in filters such as sunshading, total horizontal derivative, analytic signal, horizontal and vertical tilt angles, the Theta map and other filters. These techniques are high‐pass filters of different types and so enhance noise as well as detail in the data. A new derivative operator is introduced in this paper, which generalizes the effects of some of the previously mentioned filters. This filter is a linear combination of the horizontal and vertical field derivatives, normalized by the analytic signal amplitude. The filter is demonstrated on aeromagnetic and gravity data from South Africa. 相似文献
8.
Image processing techniques have been frequently used in processing of potential field data. The most important aim in processing potential field data is to figure out the edges of the geological bodies. The Gabor filter was used to determine the discontinuity boundaries of the source bodies causing the magnetic anomalies in this study. The synthetic total magnetic anomaly of three prism bodies with different depths and orientations was used to test the effect of the Gabor filter on the magnetic data. In addition, the Gabor filter was applied on the reduction to the pole aeromagnetic field data of the Marmara Sea and the results were compared with the fault distribution map of the area prepared by various authors. 相似文献
9.
10.
11.
Ayd?n Büyüksaraç 《Physics of the Earth and Planetary Interiors》2007,160(1):86-95
The residual aeromagnetic and gravity anomalies of inner East Anatolia, surveyed by the Mineral Research and Exploration (MTA) of Turkey, display complexities. Some faults, which are known and new lineaments, are drawn from maxspot map derived from the location of the horizontal gradient of gravity anomalies. Tectonic lineaments of inner East Anatolia exhibit similarities to the direction of East Anatolian Fault Zone. Anticlockwise rotation, approximately −30°, defined from disorientations of aeromagnetic anomalies. The lineaments obtained from maxspots map produced from the gravity anomalies and disoriented aeromagnetic anomalies are in-line with the mobilistic system revealed by the palaeomagnetic data. These Alpine age continental rotations caused westward wrenching of the global lithosphere and led to significant tectonic reactivation and deformations. GPS measurements, current tectonic knowledge and the results of the evaluation of potential field data were combined in a base map to demonstrate similarities. 相似文献
12.
Postglacial rebound is a long-studied phenomenon in Fennoscandia, and the general features of contemporary vertical motion (0–8 mm/year relative to mean sea level) are well known from tide gauges and repeated precise levelling. GPS on permanent stations has proved to be a powerful tool in studies of crustal motion, capable of detecting small trends in a fraction of the time required by the classical methods. We determine vertical velocities from 5 years of data in the permanent Finnish GPS network FinnRef®. We compare them with velocities derived from three precise levellings spanning nearly hundred years, and from tide gauge records. From the comparison, both FinnRef velocities and levelled velocities appear to be accurate to 0.4 mm/year (one-sigma). The isobases (lines of equal velocities) are less elongated towards northeast than in geophysical models of the rebound. However, the processing of nearly the same GPS data in BIFROST using different methods produces velocities that disagree with FinnRef more than levelling does. The levelled velocities are between the two GPS results and do not resolve the conflict. 相似文献
13.
Investigation into regional thermal structure of the Thrace Region, NW Turkey, from aeromagnetic and borehole data 总被引：1，自引：0，他引：1
Z. Mümtaz Hisarli M. Nuri Dolmaz Mahmut Okyar Ali Etiz Naci Orbay 《Studia Geophysica et Geodaetica》2012,56(1):269-291
The aeromagnetic values over the study region are relatively uniform except for a few anomalies in the northeastern and southwestern
areas. Analyses of aeromagnetic data were performed in NW Turkey, in order to have a look into the subsurface regional thermal
structure of the region. For this purpose, power spectra, reduced to pole (RTP), and band-pass filtered anomalies were produced
using geophysical techniques. Band-pass filtered data were produced from the RTP aeromagnetic anomalies to isolate near surface
and undesired deep effects. Based on the aeromagnetic data interpretation, the thickness of the magnetized crust, named the
Curie Point Depth (CPD), in the study area lies between 9.7 and 20.3 km. The CPD estimates in the Thrace region of Turkey
indicate two shallow CPD (SCPD1 and SCPD2) zones (the Istranca Massif and the Saros Graben area). The deep CPD are located
within the Thrace Basin with sediment thickness of about 9 km. The corresponding heat flow map prepared from the averaged
thermal conductivities and thermal gradients from the CPD reveals the existence of one low heat flow zone (75 mW/m2) over the center of Thrace Basin, and two high heat flow zones over the Istranca Masif (100–125 mW/m2) in the northern side and Saros Graben (125–135 mW/m2) areas in the southern side of the Thrace Basin. 相似文献
14.
Lubomír Kubáček Lea Bartalošová Ján Pecár Reviewer F. Charamza 《Studia Geophysica et Geodaetica》1978,22(1):1-12
Summary Given a configuration of points of a levelling traverse, it is possible to determine their heights according to various plans by applying various optimization criteria. D-, restricted D-and L-optimum plans for various configurations are generally treated. Of two plans belonging to one and the same configuration we consider the one whose determinant, or trace of the covariance matrix of adjusted heights is minimum, to be optimal.Dedicated to RNDr Jan Pícha, CSc., on his 60th Birthday 相似文献
15.
Accurate well ties are essential to practical seismic lithological interpretation. As long as the geology in the vicinity of the reservoir is not unduly complex, the main factors controlling this accuracy are the processing of the seismic data and the construction of the seismic model from well logs. This case study illustrates how seismic data processing to a near-offset stack, quality control of logs and petrophysical modelling improved a well tie at an oil reservoir. We demonstrate the application of a predictive petrophysical model in the preparation and integration of the logs before building the seismic model and we quantify our improvements in well-tie accuracy. The data for the study consisted of seismic field data from a 3D sail line through a well in a North Sea oilfield and a suite of standard logs at the well. A swathe of fully processed 3D data through the well was available for comparison. The well tie in the shallow section from first-pass seismic data processing and a routinely edited sonic log was excellent. The tie in a deeper interval containing the reservoir was less satisfactory: the phase errors within the bandwidth of the seismic wavelet were of the order of 20°, which we consider too large for subsequent transformation of the data to seismic impedance. Reprocessing the seismic data and revision of the well-log model reduced these phase errors to less than 10° and improved the consistency of the deep and shallow well ties. The reprocessing included densely picked iterative velocity analysis, prestack migration, beam-forming multiple attenuation, stacking the near-offset traces and demigration and remigration of the near-offset data. The petrophysical model was used to monitor and, where necessary, replace the P-wave sonic log with predictions consistent with other logs and to correct the sonic log for mud-filtrate invasion in the hydrocarbon-bearing sand. This editing and correction of the P-wave transit times improved the normal-incidence well tie significantly. The recordings from a monopole source severely underestimated the S-wave transit times in soft shale formations, including the reservoir seal, where the S-wave velocity was lower than the P-wave velocity in the drilling mud. The petrophysical model predicted an S-wave log that matched the valid recordings and interpolated between them. The subsequent seismic modelling from the predicted S-wave log produced a class II AVO anomaly seen on the CDP gathers around the well. 相似文献
16.
We used data from 1960.0, 1970.0, 1980.0, 1990.0, and 2000.0 to study the geomagnetic anomaly field over the Chinese mainland by using the three-dimensional Taylor polynomial (3DTP) and the surface spline (SS) models. To obtain the pure anomaly field, the main field and the induced field of the ionospheric and magnetospheric fields were removed from measured data. We also compared the SS model anomalies and the data obtained with Kriging interpolation (KI). The geomagnetic anomaly distribution over the mainland was analyzed based on the SS and 3DTP models by transferring all points from 1960.0–1990.0 to 2000.0. The results suggest that the total intensity F anomalies estimated based on the SS and KI for each year are basically consistent in distribution and intensity. The anomalous distributions in the X-, Y-, and Z-direction and F are mainly negative. The 3DTP model anomalies suggest that the intensity in the X-direction increases from ?100 nT to 0 nT with longitude, whereas the intensity in the Y-direction decreases from 400 nT to 20 nT with longitude and over the eastern mainland is almost negative. The intensity in the Z-direction and F are very similar and in most areas it is about ?50nT and higher in western Tibet. The SS model anomalies overall reflect the actual distribution of the magnetic field anomalies; however, because of the uneven distribution of measurements, it yields several big anomalies. Owing to the added altitude term, the 3DTP model offers higher precision and is consistent with KI. 相似文献
17.
Özcan Bektaş Dhananjay Ravat Aydin Büyüksaraç Funda Bilim Abdullah Ateş 《Pure and Applied Geophysics》2007,164(5):975-998
East Anatolia is a region of high topography made up of a 2-km high plateau and Neogene and Quaternary volcanics overlying
the subduction-accretion complex formed by the process of collision. The aeromagnetic and gravity data surveyed by the Mineral
Research and Exploration (MTA) of Turkey have been used to interpret qualitatively the characteristics of the near-surface
geology of the region. The residual aeromagnetic data were low-pass filtered and analyzed to produce the estimates of magnetic
bottom using the centroid method and by forward modelling of spectra to evaluate the uncertainties in such estimates. The
magnetic bottom estimates can be indicative of temperatures in the crust because magnetic minerals lose their spontaneous
magnetization at the Curie temperature of the dominant magnetic minerals in the rocks and, thus, also are called Curie point
depths (CPDs). The Curie point depths over the region of Eastern Anatolia vary from 12.9 to 22.6 km. Depths computed from
forward modelling of spectra with 200–600 km window sizes suggest that the bottom depths from East Anatolia from the magnetic
data may have errors exceeding 5 km; however, most of the obtained depths appear to lie in the above range and indicate that
the lower crust is either demagnetized or non-magnetic. In the interpretation of the magnetic map, we also used reduction-to-pole
(RTP) and amplitude of total gradient of high-pass filtered anomalies, which reduced dipolar orientation effects of induced
aeromagnetic anomalies. However, the features of the RTP and the total gradient of the high-pass filtered aeromagnetic anomalies
are not highly correlated to the hot spring water locations. On the other hand, many high-amplitude features seen on the total
gradient map can be correlated with the ophiolitic rocks observed on the surface. This interpretation is supported by Bouguer
gravity data. In this paper, we recommend that the sources of the widespread thermal activity seen in East Anatolia must be
investigated individually by means of detailed mapping and modelling of high resolution geophysical data to assess further
the geothermal potential of the region. 相似文献
18.
北天山地震带的航磁异常与深部构造 总被引：2，自引：1，他引：2
通过分析天山和邻近地区的航磁资料，划分出了４个较大的具有不同基底性质和深部构造特征的磁异常区。天山地区的地震大多数都发生在基底隆起或坳陷的附近，在深部磁场图像中，它们则位于天山高磁性块体与周围弱磁性区域之间，那里不仅是正负磁异常的转换带，而且是明显的大地构造边界。介质的磁性与其它地球物理资料一样，也是反映地震活动区域深部构造的一个重要标志。 相似文献
19.
Mapping basement structures in the northwestern offshore of Abu Dhabi from high‐resolution aeromagnetic data 
下载免费PDF全文
下载免费PDF全文 Mohammed Y. Ali 《Geophysical Prospecting》2016,64(3):726-740
This paper presents a case study of mapping basement structures in the northwestern offshore of Abu Dhabi using high‐resolution aeromagnetic data. Lineament analysis was carried out on the derivatives of the reduced‐to‐the‐pole magnetic data, along with supporting information from published geologic data. The lineament analysis suggests three well‐defined basement trends in the north–south, northeast–southwest, and northwest–southeast directions. The reduced‐to‐the‐pole magnetic data reveal high positive magnetic anomalies hypothesized to be related to intra‐basement bodies in the deep seated Arabian Shield. Depth to basement was estimated using spectral analysis and Source Parameter Imaging techniques. The spectral analysis suggests that the intruded basement blocks are at the same average depth level (around 8.5 km). The estimated Source Parameter Imaging depths from gridded reduced‐to‐the‐pole data are ranged between 4 km and 12 km with a large depth variation within small distances. These estimated depths prevent a reliable interpretation of the nature of the basement relief. However, low‐pass filtering of the horizontal local wavenumber data across two profiles shows that the basement terrain is characterized by a basin‐like structure trending in the northeast–southwest direction with a maximum depth of 10 km. Two‐dimensional forward magnetic modelling across the two profiles suggests that the high positive magnetic anomalies over the basin could be produced by intrusion of mafic igneous rocks with high susceptibility values (0.008 to 0.016 SI. 相似文献
20.
Regional–residual separation is essential in gravity and magnetic data interpretation and a variety of techniques have been proposed. Graphical determination of the regional allows geological information to be taken into account. Upward continuation can be used to obtain the regional field either empirically or using some hypothesis about the geology. In some cases, a matched filter can be designed and used to separate deep and shallow sources. Simple low pass filtering has also been used but without much success. Here we propose to use a non-linear filter approach to remove gravity and magnetic anomalies smaller than a given width. This technique attempts to mimic the graphical separation method. The results from synthetic models are presented as well as the results from a case study in eastern Canada and compared to regional gravity and magnetic anomalies obtained by other techniques. Contrary to the regional fields obtained by upward continuation, non-linear filtering does not have any physical meaning. However, its main advantage is that it gives a regional component of the gravity or magnetic field similar to the one obtained from a graphical separation. 相似文献