首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 546 毫秒
1.
2.
A regional model of tides in the Eastern North Pacific Ocean is developed through the use of inversion with two-dimensional finite element codes. Since global tide models are least accurate in coastal environments, modeling tides on a regional scale allows tidal propagation and interaction along the coast to be more accurately represented. In this respect, a regional model can act as a liaison between open ocean dynamics and physical processes more pertinent to coastal systems. The region of interest in this study extends from the Aleutian Islands to Southern California and includes deep ocean, continental shelf, and shallow water features. Boundary conditions are determined from nonlinear inversion of harmonic data from both shallow water and deep ocean tide gauges. Spatial patterns of amplitudes and phases from the model are examined for major constituents. Results are also compared to global tide models at selected stations.  相似文献   

3.
The rapid expansion of urbanization along the world’s coastal areas requires a more comprehensive and accurate understanding of the coastal ocean. Over the past several decades, numerical ocean circulation models have tried to provide such insight, based on our developing understanding of physical ocean processes. The systematic establishment of coastal ocean observation systems adopting cutting-edge technology, such as high frequency (HF) radar, satellite sensing, and gliders, has put such ocean model predictions to the test, by providing comprehensive observational datasets for the validation of numerical model forecasts. The New York Harbor Observing and Prediction System (NYHOPS) is a comprehensive system for understanding coastal ocean processes on the continental shelf waters of New York and New Jersey. To increase confidence in the system’s ocean circulation predictions in that area, a detailed validation exercise was carried out using HF radar and Lagrangian drifter-derived surface currents from three drifters obtained between March and October 2010. During that period, the root mean square (RMS) differences of both the east–west and north–south currents between NYHOPS and HF radar were approximately 15 cm s?1. Harmonic analysis of NYHOPS and HF radar surface currents shows similar tidal ellipse parameters for the dominant M2 tide, with a mean difference of 2.4 cm s?1 in the semi-major axis and 1.4 cm s?1 in the semi-minor axis and 3° in orientation and 10° in phase. Surface currents derived independently from drifters along their trajectories showed that NYHOPS and HF radar yielded similarly accurate results. RMS errors when compared to currents derived along the trajectory of the three drifters were approximately 10 cm s?1. Overall, the analysis suggests that NYHOPS and HF radar had similar skill in estimating the currents over the continental shelf waters of the Middle Atlantic Bight during this time period. An ensemble-based set of particle tracking simulations using one drifter which was tracked for 11 days showed that the ensemble mean separation generally increases with time in a linear fashion. The separation distance is not dominated by high frequency or short spatial scale wavelengths suggesting that both the NYHOPS and HF radar currents are representing tidal and inertial time scales correctly and resolving some of the smaller scale eddies. The growing ensemble mean separation distance is dominated by errors in the mean flow causing the drifters to slowly diverge from their observed positions. The separation distance for both HF radar and NYHOPS stays below 30 km after 5 days, and the two technologies have similar tracking skill at the 95 % level. For comparison, the ensemble mean distance of a drifter from its initial release location (persistence assumption) is estimated to be greater than 70 km in 5 days.  相似文献   

4.
Tidal and wind-driven surface currents in the German Bight between shallow mudflats of the North Frisian islands and the island of Helgoland are studied using coastal high-frequency radar (HFR) observations and hindcasts from a primitive equation numerical model. The setup of the observational system is described, and estimates of expected measurement errors are given. A quantitative comparison of numerical model results and observations is performed. The dominant tidal components are extracted from the two data sources using tidal harmonic analysis and the corresponding tidal ellipses are defined. Results show that the spatial patterns of different tidal ellipse parameters are consistent in the two data sets. Model sensitivity studies with constant and variable salinity and temperature distributions are used to study density-related mechanisms of circulation. Furthermore, the role of the surface wind field in driving the German Bight circulation is investigated using the complex correlation between wind and surface current vectors. The observed change of the respective correlation patterns from the coastal to open ocean is shown to be due to a combination of density effects, the coastline and topography. The overall conclusion is that HFR observations resolve the small-scale and rapidly evolving characteristics of coastal currents well in the studied area and could present an important component for regional operational oceanography when combined with numerical modelling. Some unresolved issues associated with the complex circulation and large instability of circulation in front of the Elbe River Estuary justify further considerations of this area using dedicated surveys and modelling efforts.  相似文献   

5.
Traditionally, ocean tides have been modeled in frequency domain with a forcing from selected tidal constituents. It is a natural approach; however, it implicitly neglects non-linearities of ocean dynamics. An alternative approach is time-domain modeling with a forcing given by the full lunisolar potential, i.e., all tidal waves are a priori included. This approach has been applied in several ocean tide models; however, some challenging tasks still remain, for example, assimilation of satellite altimetry data. In this paper, we introduce the assimilative scheme applicable in a time-domain model, which is an alternative to existing techniques used in assimilative ocean tide models. We present results from DEBOT, a global barotropic ocean tide model, which has two modes: DEBOT-h, a purely hydrodynamical mode, and DEBOT-a, an assimilative mode. The accuracy of DEBOT in both modes is assessed through a series of tests against tide gauge data which demonstrate that DEBOT is comparable to state-of-the-art global ocean tide models for major tidal constituents. Furthermore, as signals of all tidal frequencies are included in DEBOT, we also discuss modeling of minor tidal constituents and non-linear compound tides. Our modeling approach can be useful for those applications where the frequency domain approach is not suitable.  相似文献   

6.
A limited domain, coastal ocean forecast system consisting of an unstructured grid model, a meteorological model, a regional ocean model, and a global tidal database is designed to be globally relocatable. For such a system to be viable, the predictability of coastal currents must be well understood with error sources clearly identified. To this end, the coastal forecast system is applied at the mouth of Chesapeake Bay in response to a Navy exercise. Two-day forecasts are produced for a 10-day period from 4 to 14 June 2010 and compared to real-time observations. Interplay between the temporal frequency of the regional model boundary forcing and the application of external tides to the coastal model impacts the tidal characteristics of the coastal current, even contributing a small phase error. Frequencies of at least 3 h are needed to resolve the tidal signal within the regional model; otherwise, externally applied tides from a database are needed to capture the tidal variability. Spatial resolution of the regional model (3 vs 1 km) does not impact skill of the current prediction. Tidal response of the system indicates excellent representation of the dominant M 2 tide for water level and currents. Diurnal tides, especially K 1, are amplified unrealistically with the application of coarse 27-km winds. Higher-resolution winds reduce current forecast error with the exception of wind originating from the SSW, SSE, and E. These winds run shore parallel and are subject to strong interaction with the shoreline that is poorly represented even by the 3-km wind fields. The vertical distribution of currents is also well predicted by the coastal model. Spatial and temporal resolution of the wind forcing including areas close to the shoreline is the most critical component for accurate current forecasts. Additionally, it is demonstrated that wind resolution plays a large role in establishing realistic thermal and density structures in upwelling prone regions.  相似文献   

7.
《Continental Shelf Research》1999,19(15-16):1905-1932
The M2 tidal component of the flow in the Dover Straits is reconstructed using a natural combination of two independent data sources: HF Ocean Surface Current Radar (HF OSCR) system and coastal tidal measurements. The method used is the variational data assimilation technique into a quasi-linearized finite element tidal model. The model uses triangular elements with horizontal resolution varying from 800 to 1200 m. It is controlled by the boundary conditions at open boundaries, which are adjusted to fit the available data in an optimal way. A “weak” formulation of the dynamical constraints is used. The interpolation scheme allows small (0.01%) deviations from the exact dynamics specified by the model. The optimal state of M2 parameters (sea surface elevation and depth-averaged velocities) is used to map both the M2 tidal flux through the strait and the M2 energy flux. The respective values obtained are the tidal flux amplitude 1.18±0.09×106 m3 s−1, the net residual transport (Stoke's drift) 40±3×103 m3 s−1, and the net energy flux 1.19±0.09×1010 W. These figures within the statistically estimated error band are in the close agreement with those obtained by Prandle et al., 1993. A rigorous error analysis is performed using an explicit inversion of the Hessian matrix, associated with the assimilation scheme. As a result, error charts for M2 velocities and sea surface elevation are obtained. It is shown that OSCR data combined with coastal level measurements and constrained by dynamics is able to provide quite accurate velocity estimates whose errors vary within the range of 0.05–0.45 m s−1 depending upon the location. Error maps also enable us to determine areas requiring better coverage by data, thus forming a basis of optimization approach to the design of the HFR measurements. The use of variational assimilation technique in providing integrated interpolation patterns from various sources of data demonstrates its capabilities in relation to future oceanographic monitoring systems of shelf circulation.  相似文献   

8.
The hydrodynamics of coastal areas is characterized by the interaction among phenomena occurring at different spatial and temporal scales, such as the interaction of a large-scale ocean current with the local bathymetry and coastline, and local forcing conditions. In order to take into account all relevant phenomena, the study of the hydrodynamics of coastal zones requires a high-spatial and temporal resolution for both observations and simulation of local currents. This resolution can be obtained by using X-band radar, which allows simultaneous measurement of waves and currents in a range of 1–3 miles from the coastline, as well as high-resolution numerical models implemented in the area and configured through multiple nesting techniques in order to reach resolutions comparable to such coastal observations. Such an integrated monitoring system was implemented at the Isola del Giglio in 2012, after the accident of the Costa Concordia ship. Results can be used as a cross-validation of data produced independently by radar observations and numerical models. In addition, results give some important insights on the dynamics of the coastal boundary layer, both for what concerns the attenuation in the profile of the depth-averaged velocities which typically occur in turbulent boundary layers, as well as for the production, detachment and evolution of vorticity produced by the interaction of large-scale ocean currents with the coastline and the subsequent time evolution of such boundary layer. This transition between large-scale regional currents and the coastal boundary layer is often neglected in regional forecasting systems, but it has an important role in the ocean turbulence processes.  相似文献   

9.
This paper discusses the variability of surface currents around Sekisei Lagoon using a nested grid ocean circulation model. We developed a triple-nested grid system that consists of a coarse-resolution (1/60° or ∼1.85 km) model off Taiwan, an intermediate-resolution (1/300° or ∼370 m) model around the Yaeyama Islands, and a fine-resolution (1/900° or ∼123 m) model of Sekisei Lagoon. The nested grid system was forced by wind and heat flux calculated from six-hourly atmospheric reanalysis data and integrated over the period from May to July 2003. The coarse-resolution model was driven by lateral boundary conditions calculated from daily ocean reanalysis data to include realistic variation of the Kuroshio and mesoscale eddies with spatial scales of ∼500–700 km in the open ocean. The tidal forcing was included in the intermediate-resolution model by interpolating sea level data obtained from a data-assimilative tidal model. The results were then used to drive the fine-resolution model to simulate the surface water circulation around Sekisei lagoon. Model results show that (1) currents inside the lagoon are mainly driven by tide and wind; (2) there exists a strong southwestward current along the bottom slope in the southeast portion of the lagoon; the current is mainly driven by remote mesoscale eddies and at times intensified by the local wind; (3) the flow relaxation scheme is effective in reducing biases along the open boundaries. The simulated currents were used to examine the retention and dispersion of passive particles in the surface layer. Results show that the surface dispersion in the strong open ocean current region is significantly higher than that inside the lagoon.  相似文献   

10.
An unstructured mesh finite element model of the sea region off the west coast of Britain is used to examine the storm surge event of November 1977. This period is chosen because accurate meteorological data to drive the model and coastal observations for validation purposes are available. In addition, previous published results from a coarse-grid (resolution 7 km) finite difference model of the region and high-resolution (1 km) limited area (namely eastern Irish Sea) model are available for comparison purposes. To enable a “like with like” comparison to be made, the finite element model covers the same domain and has the same meteorological forcing as these earlier finite difference models. In addition, the mesh is based on an identical set of water depths. Calculations show that the finite element model can reproduce both the “external” and “internal” components of the surge in the region. This shows that the “far field” (external) component of the surge can accurately propagate through the irregular mesh, and the model responds accurately, without over- or under-damping, to local wind forcing. Calculations show significant temporal and spatial variability in the surge in close agreement with that found in earlier finite difference calculations. In addition, root mean square errors between computed and observed surge are comparable to those found in previous finite different calculations. The ability to vary the mesh in nearshore regions reveals appreciable small-scale variability that was not found in the previous finite difference solutions. However, the requirement to perform a “like with like” comparison using the same water depths means that the full potential of the unstructured grid model to improve resolution in the nearshore region is inhibited. This is clearly evident in the Mersey estuary region where a higher resolution unstructured mesh model, forced with uniform winds, had shown high topographic variability due to small-scale variations in topography that are not resolved here. Despite the lack of high resolution in the nearshore region, the model showed results that were consistent with the previous storm surge models of the region. Calculations suggest that to improve on these earlier results, a finer nearshore mesh is required based upon accurate nearshore topography.  相似文献   

11.
This study examines the circulation and associated monthly-to-seasonal variability in the Caribbean Sea using a regional ocean circulation model. The model domain covers the region between 99.0 and 54.0°W and between 8.0 and 30.3°N, with a horizontal resolution of 1/6°. The ocean circulation model is driven by 6-hourly atmospheric reanalysis data from the National Center for Environmental Prediction and boundary forcing extracted from 5-day global ocean reanalysis data produced by Smith et al. (Mercator Newsletter 36:39–49, 2010), and integrated for 7 years. A comparison of model results with observations demonstrates that the regional ocean circulation model has skill in simulating circulation and associated variability in the study region. Analysis of the model results, as well as a companion model run that uses steady annual mean forcing, illustrates the role of Caribbean eddies for driving monthly-to-seasonal circulation variability in the model. It is found that vertically integrated transport between Nicaragua and Jamaica is influenced by the interaction between the density perturbations associated with Caribbean eddies and the Nicaraguan Ridge. The impact of Caribbean eddies squeezing through the Yucatan Channel is also discussed.  相似文献   

12.
This paper addresses the impact of atmospheric variability on ocean circulation in tidal and non-tidal basins. The data are generated by an unstructured-grid numerical model resolving the dynamics in the coastal area, as well as in the straits connecting the North Sea and Baltic Sea. The model response to atmospheric forcing in different frequency intervals is quantified. The results demonstrate that the effects of the two mechanical drivers, tides and wind, are not additive, yet non-linear interactions play an important role. There is a tendency for tidally and wind-driven circulations to be coupled, in particular in the coastal areas and straits. High-frequency atmospheric variability tends to amplify the mean circulation and modify the exchange between the North and the Baltic Sea. The ocean response to different frequency ranges in the wind forcing is area-selective depending on specific local dynamics. The work done by wind on the oceanic circulation depends strongly upon whether the regional circulation is tidally or predominantly wind-driven. It has been demonstrated that the atmospheric variability affects the spring-neap variability very strongly.  相似文献   

13.
The spatial resolution of wind forcing fields is critical for modeling ocean surface waves. We analyze here the performance of the non-hydrostatic numerical weather prediction system WRF-ARW (Weather Research and Forecasting) run with a 14-km resolution for hindcasting wind waves in the North Atlantic. The regional atmospheric model was run in the domain from 20° N to 70° N in the North Atlantic and was forced with ERA-Interim reanalysis as initial and boundary conditions in a spectral nudging mode. Here, we present the analysis of the impact of spectral nudging formulation (cutoff wavelengths and depth through which full weighting from reanalysis data is applied) onto the performance of the modeled 10-m wind speed and wind wave fields for 1 year (2010). For modeling waves, we use the third-generation spectral wave model WAVEWATCH III. The sensitivity of the atmospheric and wave models to the spectral nudging formulation is investigated via the comparison with reanalysis and observational data. The results reveal strong and persistent agreement with reanalysis data during all seasons within the year with well-simulated annual cycle and regional patterns independently of the nudging parameters that were tested. Thus, the proposed formulation of the nudging provides a reliable framework for future long-term experiments aiming at hindcasting climate variability in the North Atlantic wave field. At the same time, dynamical downscaling allows for simulation of higher waves in coastal regions, specifically near the Greenland east coast likely due to a better representation of the mesoscale atmospheric dynamics in this area.  相似文献   

14.
Hydrodynamic models are commonly used for predicting water levels and currents in the deep ocean, ocean margins and shelf seas. Their accuracy is typically limited by factors, such as the complexity of the coastal geometry and bathymetry, plus the uncertainty in the flow forcing (deep ocean tide, winds and pressure). In Southeast Asian waters with its strongly hydrodynamic characteristics, the lack of detailed marine observations (bathymetry and tides) for model validation is an additional factor limiting flow representation. This paper deals with the application of ensemble Kalman filter (EnKF)-based data assimilation with the purpose of improving the deterministic model forecast. The efficacy of the EnKF is analysed via a twin experiment conducted with the 2D barotropic Singapore regional model. The results show that the applied data assimilation can improve the forecasts significantly in this complex flow regime.  相似文献   

15.
中国大陆精密重力潮汐改正模型   总被引:12,自引:4,他引:8       下载免费PDF全文
利用理论和实验重力固体潮模型,充分考虑全球海潮和中国近海潮汐的负荷效应,建立了中国大陆的精密重力潮汐改正模型.结果表明,采用不同的固体潮模型会对重力潮汐结果产生相对变化幅度小于0.06%的差异;在沿海地区海潮负荷的影响约为整个潮汐的4%,而中部地区约为1%,其中中国近海潮汐模型的影响约占整个海潮负荷的10%,内插或外推潮波的负荷约占海潮负荷的3%.通过比较实测的重力数据表明,本文给出的重力潮汐改正模型的精度远远优于0.5×10-8 m·s-2,说明了本文构建的模型的实用性,可为中国大陆高精度重力测量提供有效参考和精密的改正模型.  相似文献   

16.
This paper presents the development of a multiple‐station neural network for predicting tidal currents across a coastal inlet. Unlike traditional hydrodynamic models, the neural network model does not need inputs of coastal topography and bathymetry, grids, surface and bottom frictions, and turbulent eddy viscosity. Without solving hydrodynamic equations, the neural network model applies an interconnected neural network to correlate the inputs of boundary forcing of water levels at a remote station to the outputs of tidal currents at multiple stations across a local coastal inlet. Coefficients in the neural network model are trained using a continuous dataset consisting of inputs of water levels at a remote station and outputs of tidal currents at the inlet, and verified using another independent input and output dataset. Once the neural network model has been satisfactorily trained and verified, it can be used to predict tidal currents at a coastal inlet from the inputs of water levels at a remote station. For the case study at Shinnecock Inlet in the southern shore of New York, tidal currents at nine stations across the inlet were predicted by the neural network model using water level data located from a station about 70 km away from the inlet. A continuous dataset in May 2000 was used for the training, and another dataset in July 2000 was used for the verification of the neural network model. Comparing model predictions and observations indicates correlation coefficients range from 0·95 to 0·98, and the root‐mean‐square error ranges from 0·04 to 0·08 m s?1 at the nine current locations across the inlet. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
Tal Ezer 《Ocean Dynamics》2018,68(10):1259-1272
Tropical storms and hurricanes in the western North Atlantic Ocean can impact the US East Coast in several ways. Direct effects include storm surges, winds, waves, and precipitation and indirect effects include changes in ocean dynamics that consequently impact the coast. Hurricane Matthew [October, 2016] was chosen as a case study to demonstrate the interaction between an offshore storm, the Gulf Stream (GS) and coastal sea level. A regional numerical ocean model was used, to conduct sensitivity experiments with different surface forcing, using wind and heat flux data from an operational hurricane-ocean coupled forecast system. An additional experiment used the observed Florida Current (FC) transport during the hurricane as an inflow boundary condition. The experiments show that the hurricane caused a disruption in the GS flow that resulted in large spatial variations in temperatures with cooling of up to ~?4 °C by surface heat loss, but the interaction of the winds with the GS flow also caused some local warming near fronts and eddies (relative to simulations without a hurricane). A considerable weakening of the FC transport (~?30%) has been observed during the hurricane (a reduction of ~?10 Sv in 3 days; 1Sv?=?106 m3 s?1), so the impact of the FC was explored by the model. Unlike the abrupt and large wind-driven storm surge (up to 2 m water level change within 12 h in the South Atlantic Bight), the impact of the weakening GS on sea level is smaller but lasted for several days after the hurricane dissipated, as seen in both the model and altimeter data. These results can explain observations that show minor tidal flooding along long stretches of coasts for several days following passages of hurricanes. Further analysis showed the short-term impact of the hurricane winds on kinetic energy versus the long-term impact of the hurricane-induced mixing on potential energy, whereas several days are needed to reestablish the stratification and rebuild the strength of the GS to its pre-hurricane conditions. Understanding the interaction between storms, the Gulf Stream and coastal sea level can help to improve prediction of sea level rise and coastal flooding.  相似文献   

18.
Sea surface temperature (SST) from a near real-time data set produced from satellites data has been assimilated into a coupled ice–ocean forecasting model (Canadian East Coast Ocean Model) using an efficient data assimilation method. The method is based on an optimal interpolation scheme by which SST is melded into the model through the adjustment of surface heat flux. The magnitude and space–time variation of the adjustment depend on the depth of heat diffusion into the water column in response to changes in surface flux, the correlation time scale of the data, and model and data errors. The diffusion depth is scaled by the eddy diffusivity for temperature. The ratio of the model and data errors is treated as an adjustable parameter. To evaluate the quality of the assimilation, the results from the model with and without assimilation are compared to independent ship data from the Atlantic Zone Monitoring Program and the World Ocean Circulation Experiment. It is shown that the assimilation has a significant impact on the modeled SST, reducing the root mean square difference (RMSD) between the model SST and the ship SST by 0.63°C or 37%. The RMSD of the assimilated SST is smaller than that of the satellite SST by 0.23°C. This suggests that model simulations or predictions with data assimilation can provide the best estimate of the true SST. A sensitivity study is performed to examine the change of the model RMSD with the adjustable parameter in the assimilation equation. The results show that there is an optimal value of the parameter and the model SST is not very sensitive to the parameter.  相似文献   

19.
Physical and dynamical oceanography of Liverpool Bay   总被引:1,自引:1,他引:0  
The UK National Oceanography Centre has maintained an observatory in Liverpool Bay since August 2002. Over 8 years of observational measurements are used in conjunction with regional ocean modelling data to describe the physical and dynamical oceanography of Liverpool Bay and to validate the regional model, POLCOMS. Tidal dynamics and plume buoyancy govern the fate of the fresh water as it enters the sea, as well as the fate of its sediment, contaminants and nutrient loads. In this context, an overview and summary of Liverpool Bay tidal dynamics are presented. Freshwater forcing statistics are presented showing that on average the bay receives 233 m3 s − 1. Though the region is salinity controlled, river input temperature is shown to significantly modulate the plume buoyancy with a seasonal cycle. Stratification strongly influences the region’s dynamics. Data from long-term moored instrumentation are used to analyse the stratification statistics that are representative of the region. It is shown that for 65% of tidal cycles, the region alternates between being vertically mixed and stratified. Plume dynamics are diagnosed from the model and are presented for the region. The spring–neap modulation of the plume’s westward extent, between 3.5 °W and 4°W, is highlighted. The rapid eastward erosion of the plume during spring tides is identified as a potentially important freshwater mixing mechanism. Novel climatological maps of temperature, salinity and density from the CTD surveys are presented and used to validate numerical simulations. The model is found to be sensitive to the freshwater forcing rates, temperature and salinities. The existing CTD survey grid is shown to not extend sufficiently near the coast to capture the near coastal and vertically mixed component the plume. Instead the survey grid captures the westward spreading, shallow and transient, portion of the plume. This transient plume feature is shown in both the long-term averaged model and observational data as a band of stratified fluid stretching between the mouth of the Mersey towards the Isle of Man. Finally the residual circulation is discussed. Long-term moored ADCP data are favourably compared with model data, showing the general northward flow of surface water and southward trajectory of bottom water.  相似文献   

20.
The paper presents results of measurements with digital tidal LaCoste-Romberg gravimeters on the European Atlantic coast-Southern Siberia-Russian Pacific coast transect in 1995–2005. The transect includes four West European (Chizé, Ménesplet, Mordelles, and Wikle), two South Siberian (Klyuchi and Talaya), and two Far Eastern (Zabakalskoe and Yuzhno-Sakhalinsk) stations. Gravimetric measurements at the Talaya station (SW Baikal rift zone) are supplemented by long-term laser extensometer observations. The position of the stations within the rectangle (45°–55°N, 0.4°–142°E) allows one to assess existing tidal strain models (WD93 and DDW99) and various ocean tide models (SCW80, CSR3, FES95, ORI96, CSR4, FES02, GOT00, NAO99, and TPX06). Data of intracontinental stations (with a small ocean effect at distances of 2000–3000 km) agree well with the DDW99 tidal strain model (with regard to the mantle viscosity). The uncertainty of digital tidal gravity measurements is 0.25%. Results of laser extensometer measurements are at the same accuracy level. Then, the Love and Shida numbers calculated at midlatitudes of the intracontinental zone of Eurasia from combined data are h = 0.6077 ± 0.0008, k = 0.3014 ± 0.0001, and l = 0.0839 ± 0.0001. The analysis of results of Pacific and Atlantic stations located at distances of 30–300 km from the ocean showed that the FES02, CSR4, GOT00, NAO99, and TPX06 ocean tide models are preferable.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号