首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Analysis of benthic foraminiferal assemblages was performed in Bathonian to Kimmeridgian deposits through a section covering the lower half of the Agardhfjellet Formation in central Spitsbergen. The section consists mainly of organic-rich shales, which contain low-diversity agglutinated assemblages. In this foraminiferal succession five morphogroups were differentiated according to shell architecture (general shape, mode of coiling and number of chambers), integrated with the supposed microhabitat (epifaunal, shallow infaunal and deep infaunal) and feeding strategy (suspension-feeder, herbivore, bacterivore, etc.). The environmental evolution of the analysed section is interpreted by using the stratigraphic distribution of morphogroups, combined with species diversities and sedimentary data, in a sequence stratigraphic framework. The section comprises two depositional sequences, which demonstrate that species diversity and relative frequency of morphogroups are correlative with transgressive–regressive trends controlling depth and oxygenation of the water column. In both sequences, the maximum flooding interval is characterized by increased organic carbon content, dominance of the epifaunal morphogroups and reduced species diversity: features reflecting the increased degree of stagnation separating the transgressive phase from the regressive phase.  相似文献   

2.
Analysis of shelf‐edge trajectories in prograding successions from offshore Norway, Brazil, Venezuela and West Africa reveals systematic changes in facies associations along the depositional dip. These changes occur in conjunction with the relative sea‐level change, sediment supply, inclination of the substratum and the relief of the margin. Flat and ascending trajectories generally result in an accumulation of fluvial and shallow marine sediments in the topset segment. Descending trajectories will generally result in erosion and bypass of the topset segment and deposition of basin floor fans. An investigation of incised valley fills reveals multiple stages of filling that can be linked to distinct phases of deepwater fan deposition and to the overall evolution of the margin. In the case of high sediment supply, like the Neogene Niger and Orinoco deltas, basin floor fans may develop systematically even under ascending trajectory styles. In traditional sequence stratigraphic thinking, this would imply the deposition of basin floor fans during a period of relative sea‐level highstand. Facies associations and sequence development also vary along the depositional strike. The width and gradient of the shelf and slope show considerable variations from south to north along the Brazilian continental margin during the Cenozoic. During the same time interval, the continental shelf may display high or low accommodation conditions, and the resulting stacking patterns and facies associations may be utilized to reconstruct palaeogeography and for prediction of lithology. Application of the trajectory concept thus reveals nuances in the rock record that would be lost by the application of traditional sequence stratigraphic work procedures. At the same time, the methodology simplifies the interpretation in that less importance is placed on interpretation and labelling of surface boundaries and systems tracts.  相似文献   

3.
This paper describes the evolution of an extensional basin in regard to the nature and sequence stratigraphic arrangement of its carbonate deposits. The purpose of this study is to evaluate the respective effects of tectonism, eustasy, climate and oceanography on a carbonate sedimentary record. The case study is the early to mid‐Jurassic age carbonate succession of the Southern Provence Sub‐basin (SE France), located within the southern part of the extensional Western European Tethyan Margin. This work is based on sedimentologic, biostratigraphic (using ammonites and brachiopods) and sequence stratigraphic analysis of the carbonate facies of the Cherty Reddish Limestone Formation (late Sinemurian to earliest Bajocian). These strata were deposited in shoreface to lower offshore depositional environments. The succession of the various environments together with the recognition of key stratigraphic surfaces allow us to define four second‐order depositional sequences; of late Sinemurian to earliest Pliensbachian, early Pliensbachian to late Pliensbachian, earliest Toarcian to middle Aalenian and late Aalenian to early Bathonian ages. The architecture of the depositional sequences (thickness and facies variations within the systems tracts, wedge‐shaped geometries) reflects a strong tectonic control. The sub‐basin was structured by extensional faults (oriented approximately 070–090/250–270). Sea‐level variations, fluctuations in carbonate production and preservation, and environmental changes were also significant controlling factors of the carbonate deposition. The interplay of the tectonic control with the other factors resulted in five main phases in the sedimentary evolution of the sub‐basin: (1) dominant tectonic control during the initial rifting stage (late Sinemurian to early Pliensbachian); (2) increasing extensional tectonics (mid‐Pliensbachian); (3) global climato‐eustatic sea‐level fall (latest Pliensbachian) and global climato‐eustatic sea‐level rise plus hypoxia/anoxia (early Toarcian); (4) relative sea‐level fall linked to tectonic uplift related to the ‘Mid‐Cimmerian phase’ (mid‐Aalenian) and (5) oceanographic events (upwelling) and reduction in carbonate production (hypoxia/anoxia) plus tectonic downwarping (late Aalenian/earliest Bajocian).  相似文献   

4.
In this study, we integrate 3D seismic reflection, wireline log, biostratigraphic and core data from the Egersund Basin, Norwegian North Sea to determine the impact of syn‐depositional salt movement and associated growth faulting on the sedimentology and stratigraphic architecture of the Middle‐to‐Upper Jurassic, net‐transgressive, syn‐rift succession. Borehole data indicate that Middle‐to‐Upper Jurassic strata consist of low‐energy, wave‐dominated offshore and shoreface deposits and coal‐bearing coastal‐plain deposits. These deposits are arranged in four parasequences that are aggradationally to retrogradationally stacked to form a net‐transgressive succession that is up to 150‐m thick, at least 20 km in depositional strike (SW‐NE) extent, and >70 km in depositional dip (NW‐SE) extent. In this rift‐margin location, changes in thickness but not facies are noted across active salt structures. Abrupt facies changes, from shoreface sandstones to offshore mudstones, only occur across large displacement, basement‐involved normal faults. Comparisons to other tectonically active salt‐influenced basins suggest that facies changes across syn‐depositional salt structures are observed only where expansion indices are >2. Subsidence between salt walls resulted in local preservation of coastal‐plain deposits that cap shoreface parasequences, which were locally removed by transgressive erosion in adjacent areas of lower subsidence. The depositional dip that characterizes the Egersund Basin is unusual and likely resulted from its marginal location within the evolving North Sea rift and an extra‐basinal sediment supply from the Norwegian mainland.  相似文献   

5.
Two types of depositional sequences can be defined within the sequence stratigraphic framework: the parasequence and the high‐frequency sequence. Both sequences consist of stacked regressive and transgressive deposits. However, a parasequence forms under conditions of overall sea‐level rise, whereas a high‐frequency sequence forms as the sea level oscillates which results in typical forced regressive deposits during sea‐level fall. Both depositional sequences may develop over comparable temporal (10–100 kyr) and spatial (1–20 km wide and 1–40 m thick) scales. Numerical modelling is used to compare the architecture, preservation potential, internal volumes, bounding surfaces, condensed and expanded sections and facies assemblages of parasequences and high‐frequency sequences. Deposits originating from transgression are less pronounced than their regressive counterparts and consist of either preserved backbarrier deposits or shelf deposits. Shoreface deposits are not preserved during transgression. The second half of the paper evaluates in detail the preservation potential of backbarrier deposits and proposes a mechanism that explains the occurrence of both continuous and discontinuous barrier retreat in terms of varying rates of sea‐level rise and sediment supply. The key to this mechanism is the maximum washover capacity, which plays a part in both barrier shoreline retreat and backbarrier‐lagoonal shoreline retreat. If these two shorelines are not balanced, then the retreat of the coastal system as a whole is discontinuous and in time barrier overstep may take place.  相似文献   

6.
A basin‐scale, integrated approach, including sedimentological, geomorphological and soil data, enables the reliable reconstruction of the infilling history of the southern Apenninic foredeep, with its subsequent inclusion in the wedge‐top of the foreland basin system. An example is shown from the Molise‐Apulian Apennines (Southern Italy), between Trigno and Fortore rivers, where the Pleistocene tectono‐sedimentary evolution of the basin is framed into a sequence‐stratigraphic scheme. Specifically, within the traditional subdivision into Quaternary marine (Qm) and Quaternary continental (Qc) depositional cycles, five third‐order depositional sequences (Qm1, Qm2, Qc1, Qc2 and Qc3) are identified based on recognition of four major stratigraphic discontinuities. The lower sequence boundaries are represented by angular unconformities or abrupt facies shifts and are generally associated with distinctive pedological and geomorphological features. Three paleosols, observed at top of depositional sequences Qm2, Qc1 and Qc2, represent pedostratigraphic markers that can be tracked basinwide. The geomorphological response to major tectono‐sedimentary events is marked by a series of paleosurfaces with erosional, depositional and complex characteristics. Detailed investigation of the relationships between stratigraphic architecture and development of unconformities, paleosols and paleosurfaces suggests that the four sequence boundaries were formed in response to four geomorphological phases/tectonic events which affected the basin during the Quaternary. The first three tectonic events (Lower‐Middle Pleistocene), marking the lower boundaries of sequences Qm2, Qc1 and Qc2, respectively, are interpreted to be related to the tectonic regime that characterized the last phase of thrusting recorded in the Southern Apennines. In contrast, sequence Qc3 does not display evidence of thrust tectonics and accumulated as a result of a phase of regional uplift starting with the Middle Pleistocene.  相似文献   

7.
The lower Nanaimo Group was deposited in the (forearc) Georgia Basin, Canada and records the basin's initiation and early depositional evolution. Nanaimo Group strata are subdivided into 11 lithostratigraphic units, which are identified based on lithology, paleontology, texture and position relative to both the basal nonconformity and to each other. Significant topography on the basal nonconformity, however, has resulted in assignment of lithostratigraphic units that are not time correlative, and hence, cannot reliably be used to accurately reconstruct basin evolution. Herein, we present a sequence stratigraphic framework for lower Nanaimo Group strata in the Comox Sub-Basin (northern Georgia Basin) that integrates both facies analysis and maximum depositional ages (MDAs) derived from detrital zircon. This stratigraphic framework is used to define significant sub-basin-wide surfaces that bound depositional units and record the evolution of the basin during its early stages of development. Seven distinct depositional phases are identified in the lower 700 m of the lower Nanaimo Group. Depositional phases are separated by marine flooding surfaces, regressive surfaces, or disconformities. The overall stratigraphy reflects net transgression manifested as an upwards transition from braided fluvial conglomerates to marine mudstones. Transgression was interrupted by periods of shoreline progradation, and both facies analysis and MDAs reveal a disconformity in the lowermost part of the Nanaimo Group in the Comox Sub-Basin. Stratigraphic reconstruction of the Comox Sub-Basin reveals two dominant depocenters (along depositional strike) for coarse clastics (sandstones and conglomerates) during early development of the Georgia Basin. The development and position of these depocenters is attributed to subduction/tectonism driving both subsidence in the north-northwest and uplift in the central Comox Sub-Basin. Our work confirms that in its earliest stages of development, the Georgia Basin evolved from an underfilled, ridged forearc basin that experienced slow and stepwise drowning to a shoal-water ridged forearc basin that experienced rapid subsidence. We also propose that the Georgia Basin is a reasonable analogue for ridged forearc basins globally, as many ridged forearcs record similar depositional histories during their early evolution.  相似文献   

8.
We developed a seismic geomorphology-based procedure to enhance traditional trajectory analysis with the ability to visualize and quantify lateral variability along carbonate prograding-margin types (ramps and rimmed shelves) in 3D and 4D. This quantitative approach analysed the shelf break geometric evolution of the Oligo-Miocene carbonate clinoform system in the Browse Basin and delineated the feedback between antecedent topography and carbonate system response as controlling factor on shelf break rugosity. Our geometrical analysis identified a systematic shift in the large-scale average shelf break strike direction over a transect of 10 km from 62° to 55° in the Oligo-Miocene interval of the Browse Basin, which is likely controlled by far-field allogenic forcing from the Timor Trough collision zone. Plotting of 3D shelf break trajectories represents a convenient way to visualize the lateral variability in shelf break evolution. Shelf break trajectories that indicate contemporaneous along-strike progradation and retrogradation correlate with phases of autogenic slope system re-organization and may be a proxy for morphological stability of the shelf break. Shelf break rugosity and shelf break trajectory rugosity are not inherited parameters and antecedent topography does not dictate long-term differential movement of the shelf margin through successive depositional sequences. The autogenic carbonate system response to antecedent topography smooths high-rugosity areas by filling accommodation and maintains a relatively constant shelf break rugosity of ~150 m. Color-coding of the vertical component in the shelf break trajectory captures the creation and filling of accommodation, and highlights areas of the transect that are likely to yield inconsistent 2D sequence stratigraphic interpretations.  相似文献   

9.
Five 3rd-order depositional sequences are interpreted from the early Albian to late Campanian interval in the Potiguar Basin. An integrated analysis of seismic interpretations, well logs, cores and biostratigraphic data provides a stratigraphic framework composed by stratigraphic surfaces, systems tracts and sequences. Depositional Sequence 1 and 2 are, respectively, Albian and early to mid-Cenomanian aged and are composed by the falling stage, low stand, transgressive and high stand systems tracts. Depositional Sequence 3 is late Cenomanian to mid-Turonian aged and is composed by the transgressive and high stand systems tracts. Depositional sequences 4 and 5 are, respectively, late Turonian to mid-Santonian and late Santonian to mid-Campanian aged and are composed only by transgressive and high stand systems tracts. The lack of falling stage and low stand systems tracts in depositional sequences 3, 4 and 5, as well the increasing in transgressive and highstand systems tracts thickness as depositional sequences get younger, are reflection of an overall transgressive trend of a 2nd-order sequence. The interpretation proposed in this paper correlates onshore with offshore deposits within a seismic scale (3rd-order) sequence stratigraphy framework. This approach allows a better understanding of the Açu Formation, the primary oil-bearing formation of the Potiguar Basin. The Açu Formation is part of depositional sequences 1, 2 and 3 and is characterized by lateral and vertical variations of depositional systems instead of being associated to a specific depositional system. This sequence stratigraphy analysis can be used as a low-resolution framework for future high-resolution (4th-order scale) studies.  相似文献   

10.
The complex development of the northern Crotone Basin, a forearc basin of the Calabrian Arc (Southern Italy), has been documented by sedimentological, stratigraphic and structural analyses. This Mediterranean‐type fault bounded basin consists of small depocentres commonly characterized by a mix of facies that grades from continental to shallow marine. The lower Pliocene infill of the Crotone Basin consists of offshore marls (Cavalieri Marl) that grade upwards into a shallow‐marine to continental succession up to 850 m thick (Zinga Formation). The succession is subdivided into three main stratal units: Zinga 1, Zinga 2, Zinga 3 bounded by major unconformities. The Zinga 1 stratal unit grades from the Cavalieri Marl to deltaic and shoreface deposits, the latter organized into several stacked progradational wedges that show spectacular thickness changes and progressive unconformities related to salt‐cored NE‐trending growth folds and listric normal faults. The Zinga 2 stratal unit records a progressive and moderate deepening of the area, marked by fluvial sedimentation at the base, followed by lagoonal deposits and by a stacking of mixed bioclastic and siliciclastic shoreface units, organized into metre‐scale high‐frequency cycles. Deposition was controlled by NE‐trending synsedimentary normal faults that dissected the basin into a series of half‐grabens. Hangingwall stratigraphic expansion was compensated by footwall condensed sedimentation. The extensional tectonic regime continued during sedimentation of the Zinga 3 stratal unit. Deposition confined within structural lows during a generalized transgressive phase led to local enhancement of tidal flows and development of sand‐wave trains. The tectonic setting testifies the generalized structural domain of a forearc region. The angular unconformity at the top of the Zinga 3 stratal unit is regional, and marks the activation of a large‐scale tectonic phase linked to strike‐slip movements.  相似文献   

11.
The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

12.
Relative ages of late Cenozoic stratigraphy throughout the Caspian region are referenced to regional stages that are defined by changes in microfauna and associated extreme (>1000 m) variations in Caspian base level. However, the absolute ages of these stage boundaries may be significantly diachronous because many are based on the first occurrence of either transgressive or regressive facies, the temporal occurrence of which should depend on position within a basin. Here, we estimate the degree of diachroneity along the Akchagyl regional stage boundary within the Caspian basin system by presenting two late Miocene‐Pliocene aged measured sections, Sarica and Vashlovani, separated by 50 km and exposed within the Kura fold‐thrust belt in the interior of the Kura Basin. The Kura Basin is a western subbasin of the South Caspian Basin and the sections presented here are located >250 km from the modern Caspian coast. New U‐Pb detrital zircon ages from the Sarica section constrain the maximum depositional age for Productive Series strata, a lithostratigraphic package considered correlative with the 2–3 Myr‐long regional Eoakchagylian or Kimmerian stage that corresponds to a period of extremely low (>500 m below the modern level) Caspian base level. This new maximum depositional age from the Productive Series at Sarica of 2.5 ± 0.2 Ma indicates that the regionally extensive Akchagyl transgression, which ended the deposition of the Productive Series near the Caspian coast at 3.2 Ma, may have appeared a minimum of 0.5 Myr later in the northern interior of the Kura Basin than at the modern Caspian Sea coast. The results of this work have important implications for the tectonic and stratigraphic history of the region, suggesting that the initiation of the Plio‐Pleistocene Kura fold‐thrust belt may have not been as diachronous along strike as previously hypothesized. More generally, these results also provide a measure of the magnitude of diachroneity possible along sequence boundaries, particularly in isolated basins. Comparison of accumulation rates between units in the interior of the Kura subbasin and the South Caspian main basin suggest that extremely large variations in these rates within low‐stand deposits may be important in identifying the presence of subbasins in older stratigraphic packages.  相似文献   

13.
This article presents a new numerical inversion method to estimate progradation rates in ancient shallow‐marine clinoform sets, which is then used to refine the tectono‐stratigraphic and depositional model for the Upper Jurassic Sognefjord Formation reservoir in the super‐giant Troll Field, offshore Norway. The Sognefjord Formation is a 10–200‐m thick, coarse‐grained clastic wedge, that was deposited in ca. 6 Myr by a fully marine, westward‐prograding, subaqueous delta system sourced from the Norwegian mainland. The formation comprises four, 10–60‐m thick, westerly dipping, regressive clinoform sets, which are mapped for several tens of kilometres along strike. Near‐horizontal trajectories are observed in each clinoform set, and the sets are stacked vertically. Clinoform age and progradation rates are constrained by: (i) regionally correlatable bioevents, tied to seismically mapped clinoforms and clinoform set boundaries that intersect wells, (ii) exponential age–depth interpolations between bioevent‐dated surfaces and a distinctive foreset‐to‐bottomset facies transition within each well, and (iii) distances between wells along seismic transects that are oriented perpendicular to the clinoform strike and tied to well‐based stratigraphic correlations. Our results indicate a fall in progradation rate (from 170–500 to 10–65 km Myr?1) and net sediment flux (from 6–14 to ≤1 km2 Myr?1) westwards towards the basin, which is synchronous with an overall rise in sediment accumulation rate (from 7–16 to 26–102 m Myr?1). These variations are attributed to progradation of the subaqueous delta into progressively deeper waters, and a concomitant increase in the strength of alongshore currents that transported sediment out of the study area. Local spatial and temporal deviations from these overall trends are interpreted to reflect a subtle structural control on sedimentation. This method provides a tool to improve the predictive potential of sequence stratigraphic and clinoform trajectory analyses and offers a greater chronostratigraphic resolution than traditional approaches.  相似文献   

14.
Geometric analysis shows that the angle of migration of coastal sedimentary facies is a function of the relative sea-level change and the thickness of sediment deposited or eroded. The angle of facies migration compared to the slopes on the sediment surface determines the degree of facies preservation and stratigraphic relationships to the surrounding facies. Vertical facies successions generated by radial migration of environments show a great deal of variety because the sediment surface in both marine and non-marine areas is concave-up. Both regressive and transgressive sequences with non-erosive marine-nonmarine contacts can be generated. Transgression at a slightly lower angle can form a ravinement surface cut on non-marine deposits with onlapping barrier sands or shallow marine deposits. Regression with relative sea-level drop generates a minor erosion surface with baselapping isolated shoreline deposits. Disequilibrium conditions occur when sea level varies at a rate exceeding the ability of the system to supply or redistribute sediment, with resulting changes in surficial slopes. Onlapping and downlapping stratal relationships across erosion surfaces result because of differences in slopes between marine and non-marine environments. These discontinuities are generally less than one degree, but could possibly be recognized on high quality multichannel seismic lines. Most of these discontinuities are probably not regionally extensive enough to be regarded as sequence boundaries. Tectonic tilting or differential subsidence of strata during depositional hiatuses is necessary to generate true regional unconformities or sequence boundaries. Where facies climb with respect to horizontal, erosion surfaces produced only by this migration may cut across lithostratigraphic units at higher angles, up to 3 or 4 degrees. Low-angle erosion surfaces relevant to the scales of sequence stratigraphic studies may result only from facies migration, even during a period of relative sea-level rise.  相似文献   

15.
Deep-water syn-rift systems develop in partially- or transiently-linked depocentres to form complicated depositional architectures, which are characterised by short transport distances, coarse grain sizes and a wide range of sedimentary processes. Exhumed systems that can help to constrain the tectono-stratigraphic evolution of such systems are rare or complicated by inversion tectonics. Here, we document a mid-Pleistocene deep-water syn-rift system fed by Gilbert-type fan deltas in the hangingwall of a rift margin fault bounding the West Xylokastro Horst block, on the southern margin of the Gulf of Corinth, Greece. Structural and stratigraphic mapping combined with digital outcrop models permit observations along this syn-rift depositional system from hinterland source to deep-water sink. The West Xylokastro Fault hangingwall is filled by two distinct sediment systems; an axial system fed by coarse-grained sediment gravity flows derived from fault-tip Gilbert-type fan deltas and a lateral system dominated by mass transport deposits fed from an evolving fault-scarp apron. Abrupt changes in stratigraphic architecture across the axial system are interpreted to record changes in relative base level, sediment supply and tectonics. Locally, depositional topography and intra-basinal structures controlled sediment dispersal patterns, from bed-scale infilling of local rugose topography above mass transport complexes, to basin-scale confinement from the fault scarp apron. These acted to generate a temporally and spatially variable, heterogeneous stratigraphic architecture throughout the basin-fill. The transition of the locus of sedimentation from a rift margin to a fault terrace through the syn-sedimentary growth of a basinward fault produced regressive surfaces updip, which manifest themselves as channels in the deep-water realm and acted to prograde the system. We present a new conceptual model that recognises coeval axial and transverse systems based on the stratigraphic architecture around the West Xylokastro fault block that emphasizes the lateral and vertical heterogeneity of rift basin-fills with multiple entry points.  相似文献   

16.
Clinoforms with a range of scales are essential elements of prograding continental margins. Different types of clinoforms develop during margin growth, depending on combined changes in relative sea level, sediment supply and oceanographic processes. In studies of continental margin stratigraphy, trajectories of clinoform ‘rollover’ points are often used as proxies for relative sea-level variation and as predictors of the character of deposits beyond the shelf-break. The analysis of clinoform dynamics and rollover trajectory often suffers from the low resolution of geophysical data, the small scale of outcrops with respect to the dimensions of clinoform packages and low chronostratigraphic resolution. Here, through high-resolution seismic reflection data and sediment cores, we show how compound clinoforms were the most common architectural style of margin progradation of the late Pleistocene lowstand in the Adriatic Sea. During compound clinoform development, the shoreline was located landward of the shelf-break. It comprised a wave-dominated delta to the west and a barrier and back-barrier depositional system in the central and eastern area. Storm-enhanced hyperpycnal flows were responsible for the deposition of a sandy lobe in the river mouth, whereas a heterolithic succession formed elsewhere on the shelf. The storm-enhanced hyperpycnal flows built an apron of sand on the slope that interrupted an otherwise homogeneous progradational mudbelt. Locally, the late lowstand compound clinoforms have a flat to falling shelf-break trajectory. However, the main phase of shelf-break bypass and basin deposition coincides with a younger steeply rising shelf-break trajectory. We interpret divergence from standard models, linking shelf-break trajectory to deep-sea sand deposition, as resulting from a great efficiency of oceanographic processes in reworking sediment in the shelf, and from a high sediment supply. The slope foresets had a large progradational attitude during the late lowstand sea-level rise, showing that oceanographic processes can inhibit coastal systems to reach the shelf-edge. In general, our study suggests that where the shoreline does not coincide with the shelf-break, trajectory analysis can lead to inaccurate reconstruction of the depositional history of a margin.  相似文献   

17.
A. G. Plint     
《Basin Research》1988,1(1):11-22
Abstract Recent improvements in biostratigraphic and magnetostratigraphic control in the Eocene sediments of the Hampshire Basin prompted direct comparison of depositional sequences in outcrop with those predicted by the latest and most detailed Exxon coastal onlap chart. This study focused on the upper two cycles of the London Clay Formation, the Bracklesham Group and the Barton Formation, comprising nine depositional sequences, each a few 10s of metres thick. The sediments were divided into three basic facies associations: marine, estuarine and alluvial. Depositional sequences invariably rest on a regional erosion surface cut during sea-level lowstand. The lower part of each sequence consists typically of 'estuarine' sediments (including tidal channel, lagoon, tidal flat and marsh deposits), laid down under brackish conditions during the early stages of sea-level rise. Estuarine deposits are typically erosively overlain by marine shoreface or shelf deposits; the eroded, pebble-strewn contact marks the passage of the marine shoreface. Marine deposits may be erosively overlain by alluvial sediments that record coastal progradation in response to stable or slowly falling sea level. Magnetostratigraphy, in the form of truncated or absent magnetozones provides supporting evidence for significant erosion during periods of lowstand. Every sequence can be matched to the Exxon coastal onlap chart, with one exception, which, on biostratigraphic and magnetostratigraphic evidence has been shown to be absent from the Hampshire Basin. The Exxon chart suggests that in this exceptional instance, coastal onlap was insufficient to effect marine deposition in the Hampshire Basin.  相似文献   

18.
Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia   总被引：3，自引：1，他引：3  
Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.  相似文献   

19.
This paper develops a tectono‐stratigraphic model for the evolution and drowning of Early Jurassic carbonate platforms. The model arises from outcrop analysis and Sr isotope dating of successions exposed in the Betic Cordillera in southeastern Spain. Here, an extensive Early Jurassic (Sinemurian) carbonate platform developed on the rifted Tethyan margin of the Iberian Plate. The platform was dissected by extensional faults in early jamesoni times (ca. 191 Ma) and again in late ibex times (ca.188 Ma) during the Pliensbachian stage. Extensional faults and fault block rotation are shown to control the formation of three sequence boundaries that divide the platform stratigraphy (the Gavilan Formation) into three depositional sequences. The last sequence boundary marks localised drowning of the platform and deposition of the deeper water Zegri Formation, whereas adjacent platforms remain exposed or continue as the site of shallow‐marine sediment accumulation. This study is based on mapping, facies analysis and dating of platform carbonates exposed in three tectonic units within the zone: Gabar, Ponce and Canteras. Facies analysis leads to the recognition of facies associations deposited in carbonate ramp environments and adjacent to synsedimentary, marine, fault scarps. Sr isotope dating enables us to correlate platform‐top carbonates from the different tectonic units at a precision equivalent to ammonite zones. A sequence stratigraphic analysis of sections from the three tectonic units is carried out using the facies models together with the Sr isotope dates. This analysis indicates a clear tectonic control on the development of the stratigraphy: depositional sequences vary in thickness, have wedge‐shaped geometries and vary in facies, internal geometries and systems tracts from one tectonic unit to another. Criteria characterising depositional sequences and sequence boundaries from the Gabar and Ponce units are used to establish a tectono‐stratigraphic model for carbonate platform depositional sequences and sequence boundaries in maritime rifts, which can be applied to other less well‐exposed or subsurface successions from other sedimentary basins. Onlapping transgressive and progradational highstand systems tracts are recognised on dip slope ramps. Falling stage and lowstand systems tracts are developed as thick breccia units in hangingwall areas adjacent to extensional faults. Sequence boundaries vary in character, amplitude and/or duration of sea‐level fall and persistence across the area. Some boundaries coalesce onto the Canteras unit, which remained as a relatively positive area throughout the early Pliensbachian (Carixian). The carbonate platform on the Ponce tectonic unit drowned in the latest Carixian (davoei biozone). However, the adjacent tectonic units remained emergent and developed a long‐lived sequence boundary, indicating tectonic subsidence as the major cause for platform drowning. The stratigraphic evolution of this area on the rifted southern Iberian margin indicates that a widespread restricted shallow‐water carbonate platform environment accumulating peritidal carbonates evolved with faulting to a more open‐marine setting. Sr dating indicates that this transition took place around the Sinemurian–Pliesbachian boundary and it was driven by local fault‐related subsidence together with likely post‐faulting regional subsidence.  相似文献   

20.
ABSTRACT There is continued interest in how the rate of relative sea‐level rise [A ( > 0)] and the rate of sediment supply [S] function during the growth and evolution of deltaic shorelines. The theory of shoreline autoretreat, recently corroborated in flume experiments, claims that (1) A( > 0) and S can never be in equilibrium, and (2) shoreline or shelf‐edge progradation inevitably turns to retrogradation, when relative sea level is rising even modestly and even if A/S = const (> 0). Autoretreat arises because the area of the clinoform surface of the delta (or shelf edge) per kilometer of shoreline must increase as the relative sea level rises, and the delta (or shelf edge) progrades into deeper water. A finite sediment supply rate is thus liable to become inadequate to sustain progradation. The problem increases further as a rising sea level also greatly increases the delta‐plain volume that needs to be filled, further limiting the progradation of the system. The fundamental trajectory of shoreline migration is thus one characterized by a concave‐landward shape, even under the steady forcing of the basin. The magnitudes of A (> 0) and S, or A/S do not determine whether the landward turnaround of the shoreline is realized or not, but affect merely the length and height of the fundamental trajectory curve. Thus, any attempt to detect and interpret temporal changes in A and S from the observed stratigraphic record of shoreline trajectory needs first to take full account of the inbuilt autoretreat mechanism. We develop here a simple, semi‐quantitative method of reconstructing the basin conditions (A and S) from the stratigraphic record of prograding deltaic shorelines (or prograding shelf‐margin clinoforms) on the basis of the theory of shoreline autoretreat. The deterministic nature of the autoretreat theory is advantageous in managing this latter issue, because any expected or unexpected change emerges as some discrepancy from a trajectory that was predicted for the initial conditions. The autoretreat theory also provides a convenient graphical method of dealing with the uncertainty of the field data, and with evaluating the accuracy of any reconstruction. Our methodology has been developed to deal with the behaviour of deltaic shorelines, but is basically applicable to any clinoform system, the development of which is affected by relative sea level. The suggested method is applied to an Early Eocene (Ypresian) regressive shoreline succession in the Central Tertiary Basin on Spitsbergen. The studied regressive wedge developed as a delta‐driven, progradational shelf‐margin system under a regime of overall (i.e. long‐term) rise of relative sea level, but also suffered short‐term sea‐level falls associated with valley incisions on the coastal plain and shelf. On the assumption that S was constant or was steadily decreasing, the analysis of field data obtained from three sites within the basin suggests that the initial water depth in the basin was around 0.45 km, and that the overall relative sea‐level rise (c. 0.80 km) happened largely during an early time period and was followed by a longer period of much lower rate of rise. This pattern of relative sea‐level rise is consistent with the Palaeogene tectonic subsidence trend of the basin which was determined independently through a geohistory analysis. The uncertainty of the field data does not negate our reconstruction. The combined effects of autoretreat and A/S changes on a deltaic shoreline trajectory are confirmed through the development of an autoretreat‐based methodology. Conventional sequence stratigraphic models that assume a possible equilibrium condition between A and S are both conceptually misleading and insufficient to analyse basin conditions quantitatively. Sequence stratigraphic analyses of shorelines need to incorporate the autoretreat concept.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号