共查询到20条相似文献，搜索用时 46 毫秒
1.
将声波方程变换至Hamiltion体系,构造了适用于高效声波模拟的二阶显式辛Runge-Kutta-Nyström（RKN）格式,运用根数理论得到此格式的阶条件方程组. 针对两个自由度的辛条件方程组,根据三次项截断误差最小原理得到一种误差最小辛格式;通过分析声波的时间演进方程的稳定性,选择不同的辛系数使演进方程更稳定,并得到了另一种更为稳定辛格式;在频散关系分析中,选择使数值频散最小的辛系数,得到第三种最小频散辛格式. 在理论分析中,这组辛RKN格式相比常见格式在精度控制、数值频散压制以及稳定性提升等方面均具有明显优势;在数值实验中,通过具体算例验证了理论分析的正确性. 相似文献
2.
将弹性波方程变换至Hamilton体系,构造适用于弹性波模拟的高效显式二阶辛Runge-Kutta-Nystrm(RKN)格式,运用根数理论得到此格式的阶条件方程组.通过给定系数的限定条件,得到方程的对称解.为了使时间离散误差达到极小,提出数值频率与真实频率比较,通过Taylor展开,得到关于辛系数的限定方程,求解方程组得到最小频散辛RKN格式.对比分析时间演进方程的稳定性,得到使库朗数达到极大值的限定方程,求解方程组得到最稳定辛RKN格式.发现此两种格式为同一格式.新得到的辛RKN格式不依赖于空间离散方法,为了对比的需要,选取有限差分法进行空间离散.在频散、稳定性分析中,与常见辛格式对比,从理论上分析了本文提出的格式在数值频散压制、稳定性提升等方面的优势,数值实验进一步证实了理论分析的正确性. 相似文献
3.
将波动方程变换至Hamilton体系,构造了一种新的保结构算法,即最优化辛格式广义褶积微分算子(OSGCD). 在时间离散上,首先引入了Lie算子设计二级二阶辛格式,基于最小误差原理得到了优化的辛格式. 在空间离散上,引入广义离散奇异核褶积微分算子计算空间微分,提出了一种有效方法优化GCD并得到了稳定的算子系数. 针对本文发展的新方法,给出了OSGCD稳定性条件. 在数值实验中,将OSGCD与多种方法比较,从精度和计算效率两方面分析了OSGCD的计算优势,计算结果也表明OSGCD长时程以及非均匀介质中地震波模拟亦具有较强能力. 相似文献
4.
地震波传播过程本质上是能量在传播过程中逐步损耗直至殆尽的过程，而在实际应用中，常在无能量损耗假设下，用弹性波动方程或标量波动方程描述它.在哈密顿(Hamilton)体系表述下，地震波传播过程即为一个无限维的哈密顿系统随时间的演化过程.若不计能量损耗，波场演化过程实质上为一个单参数连续的辛变换，因而对应的数值算法应为辛几何算法.本文首先从地震波标量方程出发，给出哈密顿体系下地震波传播的表述，即任意两个时刻的波场是通过辛变换联系起来的.随后，把波场在时间和相空间离散化后，给出了用于波场计算的一些辛格式，如显式辛格式、隐式辛格式和蛙跳辛格式.并进一步讨论了有限差分格式和辛格式的异同.然后，应用显式辛格式和同阶的有限差分方法给出了同一理论速度模型下的波场和Marmousi速度模型下的单炮记录.数值结果表明，辛算法是一类可行的波场模拟的数值算法.在时间步长较小时，有限差分方法是辛算法的一个很好近似.文中的理论和方法，为地震波传播理论及实际应用研究提供了新的途径. 相似文献
5.
均匀介质、复杂各向同性介质和各向异性介质中的地震波传播过程,可用统一形式的标量声波方程描述.考虑到在无损耗条件下,地震波方程描述了地震波场这一个无穷维的哈密顿体系随时间的演化过程,该过程为一个单参数连续辛变换,因而可以在其哈密顿形式表述下导出其辛格式.与显式辛算法相比,隐式辛格式对应的隐式辛几何算法具有无条件稳定的特点,可以允许较大的计算步长.但是由于隐式算法不可避免地面临高阶矩阵的求逆,其每一步的计算速度较慢.为实现矩阵快速求逆,文中采用了螺旋边界条件下谱因式分解的方法.在螺旋边界条件下,需要求逆的矩阵化为带状矩阵,而且其各列非零元素的位置和大小具有非常好的相似性,因而可以采用谱因式分解的方法实现快速LU分解.文中采用二阶精度的隐式蛙跳辛格式和谱因式分解方法,计算了常速度、层状介质和Marmousi模型中的波场.计算表明,隐式辛算法不失为波场计算的一种好方法. 相似文献
6.
7.
8.
远震全波形层析成像能获得研究区域下方岩石圈乃至地幔过渡带高分辨率速度结构,是研究地球深部构造与动力学过程的有效工具.该类方法需以高精度及长时程远震波场正演模拟为基础,这为设计高精度长时程稳定的正演算法带来了挑战.在此背景之下,本文提出了一种适用于远震波场模拟的保结构算法.该方法采用谱元法（SEM）对研究区域进行空间离散,在不考虑耗散项情况下,将空间离散后的常微分方程变换为哈密顿系统形式,采用保辛分部龙格-库塔方法数值求解.在三级保辛分部龙格-库塔算法基础上添加额外空间离散项,得到修正辛算法.本文将该时间-空间全离散形式称为修正辛-谱元法（SSEM）,并将SSEM算法与频率波数域（FK）方法结合,发展了可模拟高频远震波场在局域模型内传播的SSEM-FK混合方法.该方法结合了FK方法模拟层状介质中平面波传播的高效性和SSEM计算复杂介质中弹性波传播的精确性.数值实验表明,SSEM-FK能够准确模拟高频远震波场在研究区域内的传播,结合该方法在计算效率上的优势,可为高效、高精度的远震全波形层析成像打下基础. 相似文献
9.
如何有效压制数值频散是有限差分正演模拟研究中的关键问题之一.近年来,许多学者对二阶声波方程的差分算子开展了大量的优化工作,在压制频散方面取得不错的效果.一阶压强-速度方程广泛用于研究地震波在地下变密度模型中传播规律,目前针对一阶方程的优化工作大多只是在空间差分算子上展开.本文在前人研究的基础上,推导出一阶声波方程中压强场与偏振速度场之间的解析关系,据此在传统交错网格基础上给出一种高精度的显式时间递推格式,该递推格式将时间差分与空间差分算子结合在一起,并采用共轭梯度法得到精确时间递推匹配系数,实现时空差分算子的同时优化.在编程实现算法的基础上,通过频散分析与三个典型模型测试表明:本文方法能够较为有效地压制时间频散与空间频散,提高数值计算精度;同时对复杂模型也有很好适用性. 相似文献
10.
11.
Seismic wavefield modeling is important for improving seismic data processing and interpretation. Calculations of wavefield propagation are sometimes not stable when forward modeling of seismic wave uses large time steps for long times. Based on the Hamiltonian expression of the acoustic wave equation, we propose a structure-preserving method for seismic wavefield modeling by applying the symplectic finite-difference method on time grids and the Fourier finite-difference method on space grids to solve the acoustic wave equation. The proposed method is called the symplectic Fourier finite-difference (symplectic FFD) method, and offers high computational accuracy and improves the computational stability. Using acoustic approximation, we extend the method to anisotropic media. We discuss the calculations in the symplectic FFD method for seismic wavefield modeling of isotropic and anisotropic media, and use the BP salt model and BP TTI model to test the proposed method. The numerical examples suggest that the proposed method can be used in seismic modeling of strongly variable velocities, offering high computational accuracy and low numerical dispersion. The symplectic FFD method overcomes the residual qSV wave of seismic modeling in anisotropic media and maintains the stability of the wavefield propagation for large time steps. 相似文献
12.
横向各向同性介质紧致交错网格有限差分波场模拟(英文) 总被引：4，自引：2，他引：2
针对有限差分数值模拟的频散问题,本文将交错网格技术和紧致差分格式相结合,推导了横向各向同性介质一阶速度一应力波动方程的紧致交错网格差分格式;对比分析了紧致交错网格差分格式、交错网格差分格式以及紧致差分格式的截断误差主项,并利用Fourier误差分析方法分析了上述三种差分格式的近似精度;在此基础上,分别采用上述三种差分格式进行了波场数值模拟。结果表明,当差分方程阶数相同时,紧致交错网格差分格式截断误差最小,数值频散最弱,差分精度最高,证实了该方法的有效性。 相似文献
13.
波动方程有限差分法正演模拟,对认识地震波传播规律、进行地震属性研究、地震资料地质解释、储层评价等,均具有重要的理论和实际意义.但有限差分法本身固有存在着数值频散问题,数值频散在正演模拟中是一种严重的干扰,会降低波场模拟的精度与分辨率.针对TI介质波场模拟的交错网格有限差分方法,本文从空间网格离散、时间网格离散和算子近似等三个方面对其产生的数值频散进行了分析,并结合其他学者的研究成果给出了TI介质波场模拟中压制数值频散的方法与策略：在已知介质频散关系时,对差分算子可实施算子校正;通过提高差分方程的阶数来提高波场模拟精度;采用流体力学中守恒式方程的通量校正传输方法来压制波场模拟中的数值频散;在实际正演模拟时,采用交错网格高阶有限差分方程,不仅在空间上采用高阶差分,而且在时间上也要采用高阶差分,否则只在单一方向上（空间或时间）提高方程的阶数对压制数值频散也不会取得理想的效果. 相似文献
14.
复杂构造中单程波与双程波方法模拟结果的比较表明,就地震勘探中主要关心的一次反射波而言,单程波算法已具有足够的精度. 使用单程波方程将极大地减少数值计算的计算量,同时对介质的几何和物理参数建模也降低了要求. 单程波算法可视为深度偏移的“逆运算”,这样可以很好地借用已知的深度偏移方法及其程序系统. 基于计算效率和计算精度的双重考虑,本文在介质速度结构较复杂时采用显式短算子波场延拓方法,而在介质速度结构相对简单时采用分裂步相移法. 反射系数的计算中考虑了其随入射角的变化. 相似文献
15.
Jing-Bo Chen 《Geophysical Prospecting》2009,57(6):931-941
Lax-Wendroff and Nyström methods are numerical algorithms of temporal approximations for solving differential equations. These methods provide efficient algorithms for high-accuracy seismic modeling. In the context of spatial pseudospectral discretizations, I explore these two kinds of methods in a comparative way. Their stability and dispersion relation are discussed in detail. Comparison between the fourth-order Lax-Wendroff method and a fourth-order Nyström method shows that the Nyström method has smaller stability limit but has a better dispersion relation, which is closer to the sixth-order Lax-Wendroff method. The structure-preserving property of these methods is also revealed. The Lax-Wendroff methods are a second-order symplectic algorithm, which is independent of the order of the methods. This result is useful for understanding the error growth of Lax-Wendroff methods. Numerical experiments based on the scalar wave equation are performed to test the presented schemes and demonstrate the advantages of the symplectic methods over the nonsymplectic ones. 相似文献
16.
We propose a new numerical solution to the first‐order linear acoustic/elastic wave equation. This numerical solution is based on the analytic solution of the linear acoustic/elastic wave equation and uses the Lie product formula, where the time evolution operator of the analytic solution is written as a product of exponential matrices where each exponential matrix term is then approximated by Taylor series expansion. Initially, we check the proposed approach numerically and then demonstrate that it is more accurate to apply a Taylor expansion for the exponential function identity rather than the exponential function itself. The numerical solution formulated employs a recursive procedure and also incorporates the split perfectly matched layer boundary condition. Thus, our scheme can be used to extrapolate wavefields in a stable manner with even larger time‐steps than traditional finite‐difference schemes. This new numerical solution is examined through the comparison of the solution of full acoustic wave equation using the Chebyshev expansion approach for the matrix exponential term. Moreover, to demonstrate the efficiency and applicability of our proposed solution, seismic modelling results of three geological models are presented and the processing time for each model is compared with the computing time taking by the Chebyshev expansion method. We also present the result of seismic modelling using the scheme based in Lie product formula and Taylor series expansion for the first‐order linear elastic wave equation in vertical transversely isotropic and tilted transversely isotropic media as well. Finally, a post‐stack migration results are also shown using the proposed method. 相似文献
17.
Optimal implicit staggered‐grid finite‐difference schemes based on the sampling approximation method for seismic modelling 
下载免费PDF全文
下载免费PDF全文 We propose new implicit staggered‐grid finite‐difference schemes with optimal coefficients based on the sampling approximation method to improve the numerical solution accuracy for seismic modelling. We first derive the optimized implicit staggered‐grid finite‐difference coefficients of arbitrary even‐order accuracy for the first‐order spatial derivatives using the plane‐wave theory and the direct sampling approximation method. Then, the implicit staggered‐grid finite‐difference coefficients based on sampling approximation, which can widen the range of wavenumber with great accuracy, are used to solve the first‐order spatial derivatives. By comparing the numerical dispersion of the implicit staggered‐grid finite‐difference schemes based on sampling approximation, Taylor series expansion, and least squares, we find that the optimal implicit staggered‐grid finite‐difference scheme based on sampling approximation achieves greater precision than that based on Taylor series expansion over a wider range of wavenumbers, although it has similar accuracy to that based on least squares. Finally, we apply the implicit staggered‐grid finite difference based on sampling approximation to numerical modelling. The modelling results demonstrate that the new optimal method can efficiently suppress numerical dispersion and lead to greater accuracy compared with the implicit staggered‐grid finite difference based on Taylor series expansion. In addition, the results also indicate the computational cost of the implicit staggered‐grid finite difference based on sampling approximation is almost the same as the implicit staggered‐grid finite difference based on Taylor series expansion. 相似文献
18.
双相各向异性介质中偶数阶精度有限差分数值模拟 总被引：1，自引：1，他引：0
To improve the accuracy of the conventional finite-difference method, finitedifference numerical modeling methods of any even-order accuracy are recommended. We introduce any even-order accuracy difference schemes of any-order derivatives derived from Taylor series expansion. Then, a finite-difference numerical modeling method with any evenorder accuracy is utilized to simulate seismic wave propagation in two-phase anisotropic media. Results indicate that modeling accuracy improves with the increase of difference accuracy order number. It is essential to find the optimal order number, grid size, and time step to balance modeling precision and computational complexity. Four kinds of waves, static mode in the source point, SV wave cusps, reflection and transmission waves are observed in two-phase anisotropic media through modeling. 相似文献
19.
We derive a governing second-order acoustic wave equation in the time domain with a perfectly matched layer absorbing boundary condition for general inhomogeneous media. Besides, a new scheme to solve the perfectly matched layer equation for absorbing reflections from the model boundaries based on the rapid expansion method is proposed. The suggested scheme can be easily applied to a wide class of wave equations and numerical methods for seismic modelling. The absorbing boundary condition method is formulated based on the split perfectly matched layer method and we employ the rapid expansion method to solve the derived new perfectly matched layer equation. The use of the rapid expansion method allows us to extrapolate wavefields with a time step larger than the ones commonly used by traditional finite-difference schemes in a stable way and free of dispersion noise. Furthermore, in order to demonstrate the efficiency and applicability of the proposed perfectly matched layer scheme, numerical modelling examples are also presented. The numerical results obtained with the put forward perfectly matched layer scheme are compared with results from traditional attenuation absorbing boundary conditions and enlarged models as well. The analysis of the numerical results indicates that the proposed perfectly matched layer scheme is significantly effective and more efficient in absorbing spurious reflections from the model boundaries. 相似文献
20.
In this paper, we develop a new nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique for numerically solving two-dimensional acoustic wave equations. We first split two-dimensional acoustic wave equation into the local one-dimensional equations and transform each of the split equations into a Hamiltonian system. Then, we use both a nearly analytic discrete operator and a central difference operator to approximate the high-order spatial differential operators, which implies the symmetry of the discretized spatial differential operators, and we employ the partitioned second-order symplectic Runge–Kutta method to numerically solve the resulted semi-discrete Hamiltonian ordinary differential equations, which results in fully discretized scheme is symplectic unlike conventional nearly analytic symplectic partitioned Runge–Kutta methods. Theoretical analyses show that the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique exhibits great higher stability limits and less numerical dispersion than the nearly analytic symplectic partitioned Runge–Kutta method. Numerical experiments are conducted to verify advantages of the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique, such as their computational efficiency, stability, numerical dispersion and long-term calculation capability. 相似文献