共查询到20条相似文献，搜索用时 15 毫秒
1.
The Dabie UHP unit, Central China: a Cretaceous extensional allochthon superposed on a Triassic orogen 总被引：1，自引：0，他引：1
Petrological, geochronological and structural data show that the eastern Dabie metamorphic complex resulted from two orogenic stages. Precursor rocks of the ultrahigh-pressure (UHP) and high-pressure (HP) units in the present hanging wall tectonic position were buried, penetratively deformed and subsequently exhumed by distributed, ESE-directed shearing during Triassic time. In contrast, rocks of the Dabie orthogneiss domes, now in a footwall tectonic position, were penetratively deformed during temperature-dominated, Early Cretaceous tectonic events, that are likely related to magmatic underplating. The Dabie orthogneiss domes and the UHP/HP units were juxtaposed during Early Cretaceous exhumation of Dabie orthogneiss domes by the formation of an ESE-directed low-angle ductile normal shear zone. Consequently, the UHP/HP units now represent an extensional allochthon in the hanging wall of the younger normal shear zone. The Cretaceous extensional structures are limited by boundary strike-slip faults. Consistent with the South China regional tectonic framework, ESE-directed lateral extrusion is considered to be the driving mechanism for extension and the present-day structure of the Dabie metamorphic complex. 相似文献
2.
Crustal structure of the southern Dabie ultrahigh-pressure orogen and Yangtze foreland from deep seismic reflection profiling 总被引：8，自引：0，他引：8
Shuwen Dong Rui Gao Bolin Cong † Zhongyan Zhao Xiaochun Liu Sanzhong Li Qiusheng Li Dongding Huang 《地学学报》2004,16(6):319-324
A new 140‐km‐long seismic reflection profile provides a high‐resolution crustal‐scale image of the southern Dabieshan high‐pressure (HP) metamorphic belt and the Yangtze foreland fold‐and‐thrust belt. The seismic image of the stacked section shows that the southern Dabieshan metamorphic terrane and Yangtze foreland belt are separated by a large north‐dipping fault. In the foreland the upper crust is dominated by a series of folds and thrusts formed during the collisional stage in the mid‐Triassic; it was reworked by crustal extension resulting in the formation of a late Jurassic and Cretaceous red‐bed basin. The southern Dabieshan profile shows stacked crustal slabs developed along the margin of the collisional orogenic belt. The Moho reflectors at 10–11 s (～30–33 km) are seismically prominent and segmented by a number of south‐verging thrusts that were probably developed by foreland‐directed thrusting of the deeply subducted continental crust during exhumation. The seismic reflection profile suggests that structures related to the Triassic–Jurassic subduction and exhumation of the Yangtze plate are preserved despite the severe crustal extension superimposed during the late Mesozoic and Cenozoic. 相似文献
3.
巴罗型中压变质带与巴肯型低压高温变质带的成因与大陆板块边缘的碰撞造山及陆内造山作用之间有着紧密的联系。根据变质带的空间时间配置关系、压力类型、变质作用pTt轨迹、伴生的岩浆岩等等,可以区分出3种类型的大陆造山模式:弧-陆拼贴型、陆-陆碰撞型(可进一步分为中高压型碰撞造山带和双变质型山带型(paired metamorphic mountain belt)陆-陆碰撞带)、陆内造山地壳加厚-伸展型。巴罗型中压变质带普遍出现于地壳加厚-热弛豫的构造环境,但巴肯型低压变质带形成的构造背景及物理化学条件在不同的造山带有不同的表现形式,其热源至少有:壳内岩浆侵入或岩浆板底垫托、沉降盆地放射性同位素的衰变热、构造热穹隆、变质核杂岩、地下热流体传热等。大陆边缘造山带中巴罗型变质带的倒转以及板内造山带中变质带问断等现象与造山动力学过程密切相关,记录了造山过程中的重要的地质事件,也是探讨造山历史的理想场所。由于四川丹巴地区松潘—甘孜造山带形成于很独特的3个板块双极性构造环境,表现出与世界上典型造山带诸多相似的地方,如巴罗型中压变质带、巴肯型低压高温带同时在一系列变质穹隆中发育,但又有其特殊性和复杂性,如通常只发育在大陆边缘的倒转的巴罗带和陆内造山过程中的变质相间断同时出现,显然这与本? 相似文献
4.
小秦岭金矿田中生代构造演化与矿床形成 总被引：23，自引：4，他引：23
作为中国金矿主产地之一,小秦岭变质核杂岩经历两期不同性质的伸展。第一期为沿周缘拆离断层发育、方向与造山带平行的同造山伸展,上盘向WNW运动,活动时代为距今135～123Ma,属燕山期陆内造山形成的地壳增厚和岩浆活动共同作用的结果。第二期为退化变质糜棱岩带和正断层组成的变质核杂岩内部伸展构造,代表造山后进一步隆升导致的垮塌,时代为距今120～106Ma。小秦岭变质核杂岩内部发育与垮塌伸展同期的挤压性逆冲断层,由造山后残余挤压作用和构造剥蚀导致的伸展驱动力降低所致。小秦岭中蚀变千糜岩型金矿受退化变质糜棱岩带控制,成因为典型的伸展控矿机制,石英脉型金矿产于内部逆冲断层,成矿机制与小秦岭变质核杂岩垮塌伸展过程中的构造反转相关。 相似文献
5.
Fold-and-thrust belts are prominent structures that occur at the front of compressional orogens. To unravel the tectonic and metamorphic evolution of such complexes, kinematic investigations, quantitative microstructural analysis and geothermometry (calcite–graphite, calcite–dolomite) were performed on carbonate mylonites from thrust faults of the Helvetic nappe stack in Central Switzerland. Paleo-isotherms of peak temperature conditions and cooling stages (fission track) of the nappe pile were reconstructed in a vertical section and linked with the microstructural and kinematic evolution. Mylonitic microstructures suggest that under metamorphic conditions close to peak temperature, strain was highly localized within thrust faults where deformation temperatures spatially continuously increased in both directions, from N to S within each nappe and from top–down in the nappe stack, covering a temperature range of 180–380 °C. Due to the higher metamorphic conditions, thrusting of the lowermost nappe, the Doldenhorn nappe, was accompanied by a much more pronounced nappe internal ductile deformation of carbonaceous rock types than was the case for the overlying Wildhorn- and Gellihorn nappes. Ongoing thrusting brought the Doldenhorn nappe closer to the surface. The associated cooling resulted in a freezing in of the paleo-isotherms of peak metamorphic conditions. Contemporaneous shearing localized in the basal thrust, initially still in the ductile deformation regime and finally as brittle faulting and cataclasis inducing ultimately an inverse metamorphic zonation. With ongoing exhumation and the formation of the Helvetic antiformal nappe stack, a bending of large-scale tectonic structures (thrusts, folds), peak temperature isotherms and cooling isotherms occurred. While this local bending can directly be attributed to active deformation underneath the section investigated up to times of 2–3 ma, a more homogeneous uplift of the entire region is suggested for the very late and still active exhumation stage. 相似文献
6.
The crustal architecture of the Southern Urals is dominated by an orogenic wedge thrusted westward upon the subducted East European continental margin. The N–S trending wedge constitutes an antiformal stack composed mainly of the high-P Maksyutov Complex, the overlying Suvanyak Complex and the allochthonous synformal Zilair flysch further west. These tectono-metamorphic units are separated by tectonic contacts and record discontinously decreasing metamorphic conditions from bottom to top. In the east, the E-dipping Main Uralian Normal Fault cross-cuts the metamorphic footwall and juxtaposes the non metamorphic Magnitogorsk island arc. This syncollisional normal fault compensated crustal thickening and exhumation of the high-P rocks. Orogenic shortening was accommodated by the Main Uralian Thrust, a W-vergent crustal-scale shear zone at the base of the wedge. Geological investigations and reflection seismics (URSEIS '95) argue in favour of a geodynamic evolution integrating subduction and basal accretion of high-P rocks during sinistral oblique thrusting along the Main Uralian Thrust and coeval normal-faulting along the Main Uralian Normal Fault. 相似文献
7.
Kinematics and dynamics of the Namche Barwa Syntaxis, eastern Himalaya: Constraints from deformation, fabrics and geochronology 总被引：15，自引：0，他引：15
Zhiqin Xu Shaocheng Ji Zhihui CaiLingsen Zeng Quanru GengHui Cao 《Gondwana Research》2012,21(1):19-36
Field observations, deformation and fabric analyses, and precise age data acquired by zircon SHRIMP, LA-ICP-MS U-Pb and 40Ar-39Ar dating methods have yielded new constraints on the kinematics and dynamics of the Namche Barwa Syntaxis (NBS) which is the eastern corner of the Himalaya. A two-stage model has been established to explain the formation and evolution of the NBS. The northward indentation of the Indian plate beneath the Lhasa terrane began at 55-40 Ma, and crustal materials at this corner were subducted to depths > 70 km where they experienced HP (UHP?) metamorphism. Since 40 Ma, large-scale, right-lateral strike-slip along the Sagaing fault has accommodated the rapid northward movement of the eastern Indian plate corner with respect to the Indochina block. This caused significant and progressive bending of the Indus-Yarlung suture zone (IYSZ) such that it became the Dongjiu-Milin left-lateral, strike-slip, shear zone (DMSZ) in the west and the Aniqiao-Motuo right-lateral, strike-slip, shear zone (AMSZ) in the east. Both zones underwent strong mylonitization. Meanwhile, the HP (UHP?) metamorphic rocks were rapidly exhumed, first into the deep crust at 22-18 Ma and then to the shallow crust to form an antiformal dome at 6-2 Ma. Our model provides new insight into the processes of post-collisional crustal thickening related to the formation of the Himalayan orogenic belt. 相似文献
8.
Metamorphism and deformation at different structural levels in a strike-slip fault zone, Ross Lake fault, North Cascades, USA 总被引：1，自引：0，他引：1
S. M. GORDON D. L. WHITNEY R. B. MILLER N. McLEAN N. C. A. SEATON 《Journal of Metamorphic Geology》2010,28(2):117-136
Continental crust is displaced in strike-slip fault zones through lateral and vertical movement that together drive burial and exhumation. Pressure – temperature–deformation ( P–T–d ) histories of orogenic crust exhumed in transcurrent zones record the mechanisms and conditions of these processes. The Skagit Gneiss Complex, a migmatitic unit of the North Cascades, Washington (USA), was metamorphosed at depths of ∼25–30 km in a continental arc under contraction, and is bounded on its eastern side by the long-lived transcurrent Ross Lake fault zone (RLFZ). The P–T–d conditions recorded by rocks on either side of the RLFZ vary along the length of the fault zone, but most typically the fault separates high-grade gneiss and plutons from lower-grade rocks. The Ruby Mt–Elijah Ridge area at the eastern margin of the Skagit Gneiss exposes tectonic contacts between gneiss and overlying rocks; the latter rocks, including slivers of Methow basin deposits, are metamorphosed and record higher-grade metamorphism than in correlative rocks along strike along the RLFZ. In this area, the Skagit Gneiss and overlying units all yield maximum P–T conditions of 8–10 kbar at >650 °C, indicating that slices of basin rocks were buried to similar mid-crustal depths as the gneiss. After exhumation of fault zone rocks to <15 km depth, intrusion of granitoid plutons drove contact metamorphism, resulting in texturally late andalusite–cordierite in garnet schist. In the Elijah Ridge area of the RLFZ, an overlapping step-over or series of step-overs that evolved through time may have facilitated burial and exhumation of a deep slice of the Methow basin, indicating that strike-slip faults can have major vertical displacement (tens of kilometres) that is significant during the crustal thickening and exhumation stages of orogeny. 相似文献
9.
中国大陆印支碰撞造山系及其造山机制 总被引：14，自引：6，他引：8
古特提斯洋盆的闭合导致了诸多的微块体于晚三叠世至中侏罗世(T3-J2)碰撞,形成东亚大陆南部巨型印支造山系。中国大陆的印支碰撞造山系呈现巨大的"T"型复合造山系,位于西部的印支造山系(巴颜喀拉-北羌塘-南羌塘-拉萨印支造山带)形成于"多洋盆、多地体、多岛弧"的古特提斯的构造背景,伴随古特提斯多洋盆的俯冲和闭合,产生广泛的岛弧、增生楔和高压变质带的增生造山,以及多地体的碰撞造山作用,形成大型造山拼贴体,伴随以紧闭同劈理褶皱和逆冲、走滑断裂为特征的地壳变形。而位于中东部的印支造山系为北中国与扬子陆块之间的直接碰撞的产物,在扬子被动陆缘之上形成的松潘-甘孜、南秦岭造山带显示深层滑脱为造山机制的大规模地壳上部剪切应变;由于扬子地壳印支期深俯冲(>100km)和山根挤出机制,造成大别-苏鲁造山带中大规模高压-超高压变质带的出露。 相似文献
10.
自中三叠世扬子与华北板块发生碰撞—深俯冲作用以来,大别造山带南界上的襄樊—广济断裂带主要经历过两次变形事件: 1)早期变形事件发生在中三叠世末—晚三叠世初的造山带折返阶段,表现为造山带南边界上的韧性剪切带。这期北西—南东走向的剪切带向南西陡倾,发育北西—南东向的矿物拉伸线理,主要为右行走滑的运动性质,属于造山带斜向折返的侧边界走滑剪切带。造山带折返过程中将前陆褶断带北缘原先东西向褶皱改造为北西—南东走向。2)晚期变形事件发生在晚侏罗世,表现为脆性逆冲断层,使得前陆褶断带向北东逆冲在造山带南缘之上,同时在前陆上形成了一系列的逆冲断层。该断裂带的晚期逆冲活动与郯庐断裂带左行平移同时发生,代表了滨太平洋构造活动的开始。 相似文献
11.
J.P. Platt 《地学学报》1993,5(2):119-133
The exhumation of high-pressure metamorphic rocks requires either the removal of the overburden that caused the high pressures, or the transport of the metamorphic rocks through the overburden. Exhumation cannot be achieved simply by thrusting or strike-slip faulting. It may be caused by erosion of shortened and thickened crust, but this is unlikely to be the only mechanism for exhuming rocks from depths greater than about 20 km. One or more of the following additional mechanisms may be involved. 1 Corner flow of low-viscosity material trapped between the upper and lower plates in a subduction zone can cause upward flow of deeply buried rock, and may explain some occurrences of high-pressure tectonic blocks in mélange. This process does not, however, appear to be adequate to explain the exhumation of regional high-pressure terrains. 2 Buoyancy forces acting directly on metamorphic rock bodies may cause them to rise relative to more dense surroundings. This is likely to be the most important mechanism of exhumation of crustal rocks subducted into the mantle, but cannot explain the emplacement of coherent tracts of high-density metamorphic rock into shallow crustal levels. Some high-pressure blocks emplaced at shallow levels in accretionary terrains may have been entrained in diapiric intrusions of low-density mud or serpentinite. 3 Extension driven by the forces associated with contrasts in surface elevation may explain the exhumation and structural setting of many high-pressure terrains. Extension may occur in the upper part of an accretionary wedge thickened by underplating; or it may affect the whole lithosphere in a region of intracontinental convergence, if surface elevation has been increased by the removal of a lithospheric root. In the second case extension may be accompanied by magmatism and an evolution towards higher temperature during decompression of the metamorphic terrain. 相似文献
12.
Understanding the exhumation process of deep-seated material within subduction zones is important in comprehending the tectonic evolution of active margins. The deformation and slip history of superficial nappe pile emplaced upon high-P/T type metamorphic rocks can reveal the intimate relationship between deformation and transitions in paleo-stress that most likely arose from changes in the direction of plate convergence and exhumation of the metamorphic terrane. The Kinshozan–Atokura nappe pile emplaced upon the high-P/T type Sanbagawa (= Sambagawa) metamorphic rocks is the remnant of a pre-existing terrane located between paired metamorphic terranes along the Median Tectonic Line (MTL) of central Japan. Intra- and inter-nappe structures record the state of paleo-stress during metamorphism and exhumation of the Sanbagawa terrane. The following tectonic evolution of the nappes is inferred from a combined structural analysis of the basal fault of the nappes and their internal structures. The relative slip direction along the hanging wall rotated clockwise by 180°, from S to N, in association with a series of major tectonic changes from MTL-normal contraction to MTL-parallel strike-slip and finally MTL-normal extension. This clockwise rotation of the slip direction can be attributed to changes in the plate-induced regional stress state and associated exhumation of the deep-seated Sanbagawa terrane from the Late Cretaceous (Coniacian) to the Middle Miocene. 相似文献
13.
三维P波速度解析研究结果表明，苏鲁-大别超高压变质带岩石圈地壳速度结构均具有上地壳明显高速且上凸、中地壳增厚、下地壳埋藏较深且莫霍面下凹等基本特征。与大别地区相比较，苏鲁超高压变质带存在着上地壳波速更高，且地表高速区面积与上地壳高速体体积大于大别；而莫霍面下凹程度不如大别地区，地壳山根已逐步趋向消失等独特的区域特征。显示了苏鲁地区曾发生过更激烈的俯冲与折返构造运动，与大别地区相比，有更多高速、高密度的超高压变质岩折返到上地壳与地表；然而在造山运动过程中比大别更早进入了造山运动后期等特征。对比研究结果表明，苏鲁-大别地段的造山、演化过程中，在构造运动基本相似的背景下，存在着区域性特征。苏鲁地区的造山运动以及超高压变质作用，有起始略晚、发生时期较短但相对激烈、结束早、比大别更早进入了造山运动的后期等特征。笔者分析了苏鲁区域性特征形成的主要构造原因是，郯庐断裂带的大规模左旋走滑运动以及通过中国华北区域的大范围NXV—SE向扩张应力场的影响。其中，中生代以来大华北地区的大区域扩张应力场的影响可能是该区俯冲到地幔内的超高压变质岩能够大量折返回地表或上地壳的重要构造原因。 相似文献
14.
辽东古元古代造山带花岗片麻岩穹窿:热造山带典型构造样式 总被引：1，自引：1，他引：0
中下地壳的底辟上升是地壳中物质运移和热传递的一种重要机制,由这种机制产生的一系列穹窿构造不仅为揭示区域构造环境和构造演化提供了重要的线索,而且还提供了一个了解地壳深部物质流动的窗口。辽东半岛的古元古代造山带内就发育有这样一套花岗片麻岩穹窿构造,为了深入理解这套花岗片麻岩穹窿的成因以及对造山带演化的影响,本文对其不同构造层次进行了详细的构造特点和变形演化研究。结果显示,典型的花岗片麻岩穹窿可分为三层结构:混合岩化的花岗岩内核、发育顺层韧性剪切带的幔部以及含大型构造透镜体的外壳。其中核部花岗岩塑性流动变形发育,并具有明显的交代现象。顺层韧性剪切带的变形环境由靠近岩体的角闪岩相到远离岩体的低绿片岩相,并且没有明显的退化变质特点,拉伸线理具有统一的NW-SE方向。根据年代学数据与区域构造分析,花岗片麻岩穹窿构造是在区域收缩体制下花岗岩底辟形成的产物,其出现标志着辽东古元古代造山带变为一个由垂向和横向对流作用为主导的热造山带。 相似文献
15.
16.
Vladimir A.SANKOV Anna V.PARFEEVETS Andrey I.MIROSHNITCHENKO Aleksey V.SANKOV Amgalan BAYASGALAN Sodnomsambuu DEMBEREL 《地学前缘》2022,29(1):245-265
阿穆尔板块西部边界在蒙古境内的空间位置尚不清楚,并且活动断层构造及其沿线地壳的应力状态研究较少。本文在沿此边界的三个区域——杭爱—肯特构造鞍部、布尔古特地块(鄂尔浑—土拉交汇处)和色楞格地块(包括色楞格凹陷和布伦—努鲁隆起),利用空间图像解译、地形起伏度分析、地质构造资料以及构造压裂和沿裂缝位移资料重建构造古应力,对活动断层进行研究。研究表明,活动断裂继承了古生代和中生代古构造的非均质性。这些断层沿着板块边界并不是单一的带,而是成簇的。它们的运动取决于走向:亚纬向断层是具有一定逆分量的左旋走滑断层,北西向断层是逆断层或逆冲断层,通常具有右旋走滑分量,海底断层是右旋走滑断层,北东向断层是正断层。位于色楞格凹陷和杭爱东部的断裂构造的活动始于上新世。逆断层和走滑断层与上新世情况不符,但多与更新世地貌相符,表明其活动年代较晚,为更新世时期。利用构造断裂和沿断裂的位移,重建活动断裂带变形末阶段的应力应变状态,结果表明断裂在最大挤压轴的北北东和北东方向上以压缩和走滑为主。只有在色楞格凹陷内,以扩张和走滑类型的应力张量为主,且在最小挤压轴的北西走向尤为显著。在南部,杭爱东部(鄂尔浑地堑)内有1个以扩张机制为主的局部区域,说明蒙古中部断裂在更新世—全新世阶段的活动以及现代地震活动主要受与印度斯坦和欧亚大陆汇聚过程相关的东北方向的附加水平挤压的控制。使研究区地壳产生走滑变形、贝加尔湖裂谷发散活动以及阿穆尔板块东南运动的另一个因素是东南方向软流圈流动对岩石圈底部的影响。阿穆尔板块和蒙古地块之间的边界在构造结构上是零碎的,代表了覆盖整个蒙古西部变形带的边缘部分。 相似文献
17.
地壳的拆离作用与华北克拉通破坏:晚中生代伸展构造约束 总被引：19，自引：0，他引：19
伸展条件下的地壳拆离作用是岩石圈减薄的重要浅部构造响应。晚中生代时期的伸展构造(包括拆离断层、变质核杂岩构造和断陷盆地)在华北、华南、东北和东蒙古及贝加尔地区普遍发育,它们切过上部地壳(断陷盆地)、中、上地壳(拆离断层)或中部地壳(变质核杂岩)。地壳拆离作用具有运动学极性(NWW或SEE)、几何学宏观(区域)对称与微观(局部)不对称性、遍布全区但不均匀性,以及形成时间的跨越性(140~60Ma)等特点,并使得地壳和岩石圈发生显著的减薄。本文研究揭示出现今岩石圈厚度变化与晚中生代伸展构造的发育程度和分布之间并没有必然的联系。其变化的基本规律是,除新生代裂陷发育区岩石圈厚度明显较小且厚度有迅速变化外,从华北向贝加尔地区总体的变化趋势是逐渐加厚,也即东亚地区岩石圈具有楔形形态。晚中生代时期的地壳(或地幔)拆离作用伴随着广泛的岩石圈减薄作用,区域岩石圈同时遭受到一定程度的减薄和破坏,华北克拉通在这一时期的破坏仅仅是区域岩石圈减薄在华北的具体体现。 相似文献
18.
Suo Shutian 《中国地质大学学报(英文版)》1999,10(3):187-193
INTRODUCTIoNTheDabie-Suluregion,Chinahasbeenrecognizedasthelargestultrahigh-pressuremetamorphic(UHPM)(peakp>2.7GPa)andHPMbeltsintheworld,andattractedexten-siveinterestfrominternationalgeoscientists.AwealthofpublicationsexistsabouttheoccurrenceofUHPMindexmin-erals,thegeochronology,metamorphicPTpaths,andthelarge-scaleconceptualtectonicevolutionofUHPMandhigh-pressuremetamorphic(HPM)rocksintheDabie-Suluregion.Morerecentoverviewsaregiven'byErnstetal.(1995),Liouetal.(l996),andHackere… 相似文献
19.
A. Scharf M. R. Handy S. Favaro S. M. Schmid A. Bertrand 《International Journal of Earth Sciences》2013,102(6):1627-1654
The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria. 相似文献
20.
超高压变质岩的塑性流变学 总被引：1，自引：1，他引：0
岩石流变作用是大陆造山作用的基本特征,超高压岩石的形成和折返过程也是大陆深俯冲带内物质的复杂流变过程。要深入理解大陆造山带的造山作用和大陆壳岩石的深俯冲和折返动力学过程,必须对大陆地壳及地幔岩石的流变学进行深入研究。岩石圈流变学的主要研究内容主要包括流变学分层性、变形分解和应变局部化及大陆壳岩石部分熔融作用的流变学效应等。应用岩石圈流变学的基本原理和方法,分析了大别-苏鲁超高压变质带中超高压变质岩的塑性流变特点,探讨了超高压变质岩形成和折返过程的塑性流变学。 相似文献