首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The diagenetic transformation of biogenic silica from opal-A to opal-CT was recognised on seismic reflection data over an area of 78 × 103 km2 on the mid-Norwegian margin. The opal-A/CT diagenetic boundary appears as a positive, high amplitude reflection that generally cross-cuts the hosting stratigraphy. We demonstrate that it is not a sea bottom simulating reflection (BSR) and also that is not in thermal equilibrium with the present day isotherms. We present arguments that three styles of deformation associated with the opal-A/CT reflection – polygonal faulting, regional anticlines and synclines and differential compaction folding – indicate that the silica diagenesis reaction front is fossilised at a regional scale. Isochore maps demonstrate the degree of conformity between the opal-A/CT reflection and three seismic horizons of Late Miocene to Early Pliocene age that potentially represent the paleo-seabed when ‘fossilisation’ of the reaction front took place. The seismic interpretational criteria for recognition of a fossilised diagenetic front are evaluated and the results of our study are integrated with previous studies from other basins of the NE Atlantic in order to determine if the arrest of silica diagenesis was diachronous along this continental margin.  相似文献   

2.
In many sedimentary basins the seismic reflections that mark the conversion of opal-A to opal-CT and the subsequent conversion of opal-CT to quartz, are parallel to the present-day seabed. As the reactions are in part thermally activated these boundaries have been proposed as potential isothermal markers and could have utility for hydrocarbon exploration. We describe opal-A to opal-CT and opal-CT to quartz diagenetic boundaries using 2D seismic data from the North Sakhalin Basin (NSB). These are not parallel to the present-day seabed, but for 80% of the area of the basin are parallel to an unconformity of Late Miocene age and may represent palaeo-isotherms that were parallel to the Late Miocene seabed. This characteristic has been identified in other basins and may indicate silica diagenetic boundaries do not make reliable present-day isothermal boundaries. We propose diagenetic boundaries, which are not parallel to the seabed, are not present-day isothermal boundaries. This characteristic could result from: (1) temperature decrease, such as through a declining geothermal gradient or erosion of the overburden, which will cause the rate of conversion to slow; (2) variations in the burial rate that would cause changes to the rate of conversion; and (3) a change in the rate of conversion as a result of variation in the physico-chemical factors influencing the silica diagenetic reactions.  相似文献   

3.
Chalk compaction is often assumed to be controlled by a combination of mechanical and effective stress-related chemical processes, the latter commonly referred to as pressure solution. Such effective stress-driven compaction would result in elevated porosities in overpressured chalks compared with otherwise identical, but normally pressured chalks. The high porosities that are frequently observed in overpressured North Sea chalks have previously been reported to reflect such effective stress-dependent compaction.However, several wells with deeply buried chalk sequences also exhibit low porosities at high pore pressures. To investigate the possible origins of these overpressures, basin modeling was performed in a selected well (NOR 1/3-5) offshore Norway. This modeling was based on both effective stress-driven mechanical porosity reduction, which enables modeling of disequilibrium compaction, and on stress-insensitive chemical compaction where the porosity reduction is caused by thermally activated diagenesis.The modeling has demonstrated that the present day porosities and pore pressures of the chalks could be successfully replicated with mechanical porosity loss as the only process leading to chalk porosity reduction. However, the modeled porosity and fluid pressure history of the sediments deviated significantly from the porosity and pore pressure versus depth relationships observed in non-reservoir North Sea chalks today. To the contrary, modeling which was based on thermally activated porosity loss due to diagenesis (as a supplement to mechanical compaction), resulted in modeled chalk histories that are consistent with present day observations.It was therefore inferred that disequilibrium compaction could not account for all of the pore pressure development in overpressured chalks in the study area. The observation that modeling including temperature-controlled diagenetic porosity reduction gave plausible results, suggests that such porosity reduction may in fact be operating in chalks as well as in clastic rocks. If this is correct, then improved methods for pore pressure identification and fluid flow analysis in basins containing chalks should be developed.  相似文献   

4.
The evaluation of the original intergranular porosity loss due to compaction (COPL) and cementation (CEPL) is an important tool for understanding the contribution of diagenetic processes to porosity reduction and permeability retention of sandstones and carbonate grainstones. The previous approach for computing CEPL and COPL assumed that the volume of framework grains remained constant during diagenesis. However, such assumption will introduce error in COPL and CEPL if diagenetic processes reduced the volume of framework grains. New equations are presented that account for such situations. Comparably, the previous approach underestimates COPL and the compaction index, but over-estimates CEPL in the case of volume loss of framework grains by dissolution or intergranular pressure solution (DIPL). The deviation of CEPL and COPL caused by DIPL rises with the increase in the intergranular volume and DIPL. Analysis of three published case studies suggests that DIPL values of just a few percentages will significantly impact COPL and CEPL values. The effects of DIPL can be greater than the effects of uncertainty in original porosity estimates and uncertainty in point count data.  相似文献   

5.
首次分析睡宝盆地A井区古近系成岩演化序列并提出其储层处于中成岩A1-A2期,此成岩阶段有利于次生孔隙的保护。研究区古近系储层成岩演化序列具有特殊性：第一期胶结作用为硅质胶结,早于机械压实作用或者同时进行,强烈的机械压实作用使得孔隙度减小15%,此后第二期碳酸盐胶结作用占主导,镜下统计两期胶结作用的减孔量为4%~6%;渐新世受到挤压构造运动和表生成岩作用的双重影响,紧临渐新统不整合面以下的储层由于碳酸盐胶结物溶解而形成次生孔隙。2009年中海油新钻井地处冲起构造,后期的这种构造变形对始新统及其以下的核部地层产生侧向挤压形成构造压实效应,原始孔隙遭到更多的破坏,而对渐新统起到构造托举的作用,可以减缓上覆沉积物的静岩压实效应。成岩演化序列的特殊性和多期构造运动使得古近系储层物性出现差异,总结储集性好的储层并分析其成因机制,对睡宝盆地下一步勘探具有重要指导意义。  相似文献   

6.
A detailed laboratory study of 53 sandstone samples from 23 outcrops and 156 conventional core samples from the Maastrichtian-Paleocene Scollard-age fluvial strata in the Western Canada foredeep was undertaken to investigate the reservoir characteristics and to determine the effect of diagenesis on reservoir quality. The sandstones are predominantly litharenites and sublitharenites, which accumulated in a variety of fluvial environments. The porosity of the sandstones is both syn-depositional and diagenetic in origin. Laboratory analyses indicate that porosity in sandstones from outcrop samples with less than 5% calcite cement averages 14%, with a mean permeability of 16 mD. In contrast, sandstones with greater than 5% calcite cement average 7.9% porosity, with a mean permeability of 6.17 mD. The core porosity averages 17% with 41 mD permeability. Cementation coupled with compaction had an important effect in the destruction of porosity after sedimentation and burial. The reservoir quality of sandstones is also severely reduced where the pore-lining clays are abundant (>15%). The potential of a sandstone to serve as a reservoir for producible hydrocarbons is strongly related to the sandstone’s diagenetic history. Three diagenetic stages are identified: eodiagenesis before effective burial, mesodiagenesis during burial, and telodiagenesis during exposure after burial. Eodiagenesis resulted in mechanical compaction, calcite cementation, kaolinite and smectite formation, and dissolution of chemically unstable grains. Mesodiagenesis resulted in chemical compaction, precipitation of calcite cement, quartz overgrowths, and the formation of authigenic clays such as chlorite, dickite, and illite. Finally, telodiagenesis seems to have had less effect on reservoir properties, even though it resulted in the precipitation of some kaolinite and the partial dissolution of feldspar.  相似文献   

7.
Three-dimensional seismic data from the Sørvestsnaget Basin, SW Barents Sea supported by well data, are used to investigate a Middle Eocene deep-water depositional system. The system forms a NNW-oriented sediment accumulation, characterized by increased seismic amplitudes, and abrupt western termination. The data indicate that post-depositional sand remobilization and injection led to formation of sub-circular sediment blocks up to several km wide to the east of the main accumulation. The deep-water depositional system was deformed by wing-like sandstone intrusions, extending 200–400 m upwards from the margins of the parent sand bodies. The intrusions have polygonal or broadly circular plan view geometries. Deformation is inferred to have been associated with overpressure of the sand bodies as a result of rapid burial, fluid migration into the sealed sand bodies from deeper sources via synsedimentary faults, and fluid drainage from the surrounding mudrock during early compaction. The final triggering mechanism for sand remobilization and injection is inferred to have been fracture propagation due to differential compaction and/or fault-induced earthquakes. The injectite complexes are often associated with folding of overlying strata, which we relate to differential compaction. Intrusion of sand took place during the Middle Eocene. Post-depositional sand remobilization and injection have important implications for hydrocarbon exploration because they cause changes in the reservoir primary architecture, connectivity and structure.  相似文献   

8.
The Jiaolai Basin (Fig. 1) is an under-explored rift basin that has produced minor oil from Lower Cretaceous lacustrine deltaic sandstones. The reservoir quality is highly heterogeneous and is an important exploratory unknown in the basin. This study investigates how reservoir porosity and permeability vary with diagenetic minerals and burial history, particularly the effects of fracturing on the diagenesis and reservoir deliverability. The Laiyang sandstones are tight reservoirs with low porosity and permeability (Φ < 10% and K < 1 mD). Spatial variations in detrital supply and burial history significantly affected the diagenetic alterations during burial. In the western Laiyang Sag, the rocks are primarily feldspathic litharenites that underwent progressive burial, and thus, the primary porosity was partially to completely eliminated as a result of significant mechanical compaction of ductile grains. In contrast, in the eastern Laiyang Sag, the rocks are lithic arkoses that were uplifted to the surface and extensively eroded, which resulted in less porosity reduction by compaction. The tectonic uplift could promote leaching by meteoric water and the dissolution of remaining feldspars and calcite cement. Relatively high-quality reservoirs are preferentially developed in distributary channel and mouth-bar sandstones with chlorite rims on detrital quartz grains, which are also the locations of aqueous fluid flow that produced secondary porosity. The fold-related fractures are primarily developed in the silt–sandstones of Longwangzhuang and Shuinan members in the eastern Laiyang Sag. Quartz is the most prevalent fracture filling mineral in the Laiyang sandstones, and most of the small-aperture fractures are completely sealed, whereas the large-aperture fractures in a given set may be only partially sealed. The greatest fracture density is in the silt–sandstones containing more brittle minerals such as calcite and quartz cement. The wide apertures are crucial to preservation of the fracture porosity, and the great variation in the distribution of fracture-filling cements presents an opportunity for targeting fractures that contribute to fluid flow.  相似文献   

9.
This paper analyses the diagenetic evolution of sandstones belonging to the Bajo Barreal Formation (Cretaceous) in the Golfo de San Jorge Basin (Patagonia, Argentina). The Bajo Barreal Formation includes the main reservoirs, which are located along the western area of the basin and is composed of sandstones, conglomerates, mudstones, tuffaceous mudstones and some layers of tuffs. The principal reservoirs comprise medium-to coarse-grained sandstones, which are dominated by feldspathic litharenites and contain minor amounts of litharenites and lithic arkoses. The authigenic minerals include kaolinite, smectite, chlorite, quartz overgrowths, microquartz and calcite, with minor proportions of megaquartz, siderite, analcime, laumontite, feldspar overgrowths and illite/smectite and chlorite/smectite mixed layers. Secondary porosity is much more important than primary porosity and is produced by the dissolution of feldspar, lithic clasts and clay cements. The diagenetic history of the Bajo Barreal sandstones can be divided into seven diagenetic stages, each of which is characterized by a specific assemblage of authigenic minerals and diagenetic processes. Eogenetic conditions occur in stages 1, 2, 3 and 4. Stage 1 corresponds to shallow burial characterized by the physical reduction of primary porosity by compaction; during stage 2, rim clay cements of chlorite, smectite and clinoptilolite, as well as thin quartz overgrowths, were formed. The precipitation of pore-filling cements of kaolinite, chlorite and smectite occurred during stage 3, while stage 4 records the intense dissolution of feldspar, lithic fragments and kaolinite cements. Mesogenesis occurs in diagenetic stages 5 and 6. The former corresponds to a new phase of authigenic kaolinite, while the latter records the significant dissolution of feldspar, lithic clasts and previous cements, which produced the highest values of secondary porosity. Finally, stage 7 corresponds to the highest degree of diagenesis in the Bajo Barreal Formation (mesogenesis), which resulted in the precipitation of cements of zeolites and calcite, as well as quartz and plagioclase overgrowths.  相似文献   

10.
The Upper Triassic – Lower Jurassic Åre Formation comprising the deeper reservoir in the Heidrun Field offshore mid-Norway consists of fluvial channel sandstones (FCH), floodplain fines (FF), and sandy and muddy bay-fill sediments (SBF, MBF) deposited in an overall transgressive fluvial to lower delta plain regime. The formation has been investigated to examine possible sedimentary facies controls on the distribution of cementation and compaction based on petrography and SEM/micro probe analyses of core samples related to facies associations and key stratigraphic surfaces. The most significant authigenic minerals are kaolinite, calcite and siderite. Kaolinite and secondary porosity from dissolution of feldspar and biotite are in particular abundant in the fluvial sandstones. The carbonate minerals show complex compositional and micro-structural variation of pure siderite (Sid I), Mg-siderite (Sid II), Fe-dolomite, ankerite and calcite, displaying decreasing Fe from early to late diagenetic carbonate cements. An early diagenetic origin for siderite and kaolinite is inferred from micro-structural relations, whereas pore filling calcite and ankerite formed during later diagenesis. The Fe-dolomite probably related to mixing-zone dolomitization from increasing marine influences, and a regional correlatable calcite cemented layer has been related to a flooding event. Porosity values in non-cemented sandstone samples are generally high in both FCH and SBF facies associations averaging 27%. Differential compaction between sandstone and mudstone has a ratio of up to 1:2 and with lower values for MBF. We emphasize the role of eogenetic siderite cementation in reducing compactability in the fine-grained, coal-bearing sediments most prominent in MBF facies. This has implications for modeling of differential compaction between sandstone and mudstones deposited in fluvial-deltaic environments.  相似文献   

11.
The complex burial and diagenetic histories of the Jurassic Fulmar and Triassic Skagerrak sandstones in the UK Central North Sea present significant challenges with regard to reservoir quality and rock property prediction. Commercial reservoir quality is retained despite deep burial and associated high temperatures and pressures. Shallow marine Fulmar sands are normally compacted (mean IGV = 26 ± 3%) yet have porosities of 21–33%. Porosity was preserved through inhibition of quartz cementation by clay and microquartz coatings, and enhanced by dissolution of framework grains (∼5%). Skagerrak fluvial sands are more compacted (mean IGV = 23 ± 2%), exhibit minor feldspar dissolution (<1%), and have porosities of 16–27%. Quartz cement averages only 2 ± 1.5% due to robust chlorite coats that cover 80% (±13%) of quartz surfaces.We modeled reservoir quality evolution using the forward diagenetic model Touchstone, which simulates porosity loss due to compaction and quartz cementation. Quantitative petrographic analyses and burial history data were used to calibrate Touchstone model parameters. The results were applied to deeper prospects for pre-drill prediction of porosity and permeability. In parallel, petrophysical data were used to characterize the elastic properties of the sandstones to provide a basis for quantitative seismic forward modeling. Experimental data and core-calibrated petrophysical results, reflecting variable in situ fluids and saturations, were used to build an elastic properties model. The model is robust and was used to generate fluid-filled sandstone properties, incorporating Touchstone results, for prospect-specific seismic attribute modeling. Well results from exploration wells are in good agreement with pre-drill Touchstone and elastic properties model predictions.  相似文献   

12.
In the Great South Basin, within the Eocene section, at time-depths around 700–900 ms two way time below the seafloor, unusual features are observed on 3D seismic data closely associated with polygonal faults. The features, referred to as honeycomb structures (HS), cover an area of ∼600 km2, are packed circular, oval, to polygonal depressions 150–400 m across in plan view and several to 10 + m in amplitude. Polygonal faults rapidly die out at the Marshall Paraconformity, which is overlain by the Oligocene Penrod Formation. Hence the polygonal faults are inferred to have formed prior to the Marshall Paraconformity, and they cross-cut HS features. Consequently the top of the HS probably formed at burial depths of around 375–500 m, which is their decompacted depth below the paraconformity. The interval containing HS is about 125 m vertical thick. There are several possible origins for the HS. The most probable is related to bulk contraction of the sediment volume accompanied by fluid expulsion, which suggests a diagenetic origin, in particular the opal-A/CT transition. There are actually two polygonal fault systems (PFS) present in the area. The Southern Tier 1 PFS lies laterally to the HS and overlaps with it. The Northern PFS (Tier 2) lies above the HS, appears to be independent of the HS, and formed in the upper 200–300 m of the sediment column. The Tier 1 PFS probably formed by shear failure related to the same diagenetic effects that caused the HS.  相似文献   

13.
Regional extension which initiates and promotes the rise of salt diapirs can also make diapirs fall once the supply of salt from its source is restricted. New observations on the 3D seismic data from a salt diapir in the Sørvestsnaget Basin suggest that salt moves until the end of the Eocene and is subtle to minor readjustments afterwards, revealing a more complex kinematics that previously described. Observations such as salt horns and sags and an antithetic fault linked to the western flank of the diapir suggest that salt syn-kinematics during Middle-Late Eocene included passive rising of the salt, followed by a fall. The salt horns are remnants of a taller salt diapir that, together with the indentation of the Middle-Late Eocene syn-kinematic sediment overburden above the salt, indicate diapiric fall due to restriction of salt supply by extension. Post-kinematic readjustments did not include diapiric reactivation by tectonic compression as previously thought, but minor salt rise by shortening due to gravity gliding after the tilting of the margin during Plio-Pleistocene glacial sediment loading and differential compaction of surrounding sediments. The salt diapir appears to be presently inactive and salt supply may have been restricted from its source already since Late Eocene.  相似文献   

14.
The Lower Devonian Jauf Formation in Saudi Arabia is an important hydrocarbon reservoir. However, in spite of its importance as a reservoir, published studies on the Jauf Formation more specifically on the reservoir quality (including diagenesis), are very few. This study, which is based on core samples from two wells in the Ghawar Field, northeastern Saudi Arabia, reports the lithologic and diagenetic characteristics of this reservoir. The Jauf reservoir is a fine to medium-grained, moderate to well-sorted quartz arenite. The diagenetic processes recognized include compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of the calcite cements and of feldspar grains. The widespread occurrences of early calcite cement suggest that the Jauf reservoir lost a significant amount of primary porosity at a very early stage of its diagenetic history. Early calcite cement, however, prevented the later compaction of the sandstone, thus preserving an unfilled part of the primary porosity. Based on the framework grain–cement relationships, precipitation of the early calcite cement was either accompanied or followed by the development of part of the pore-lining and pore-bridging clay cement. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late calcite cement occurs as isolated patches, and has little impact on reservoir quality of the sandstones.In addition to calcite, several different clay minerals including illite and chlorite occur as pore-filling and pore-lining cements. While the pore-filling illite and chlorite resulted in a considerable loss of porosity, the pore-lining chlorite may have helped in retaining the porosity by preventing the precipitation of syntaxial quartz overgrowths. Illite, which largely occurs as hair-like rims around the grains and bridges on the pore throats, caused a substantial deterioration to permeability of the reservoir. Diagenetic history of the Jauf Formation as established here is expected to help better understanding and exploitation of this reservoir.  相似文献   

15.
The Upper Cretaceous Mesaverde Group in the Piceance Basin, western Colorado, contains thick sections of low porosity, low permeability sandstones that are reservoirs for large accumulations of hydrocarbon gas. The Mesaverde sandstones are lithic arkoses and feldspathic litharenites, containing quartz, plagioclase, variable K-feldspar, chert, and volcanic rock fragments. Important diagenetic processes that have affected the sandstones include compaction, dissolution of feldspar and/or alteration to clay, precipitation of carbonate and quartz cements, precipitation of illite, and alteration of detrital clays (mixed-layer illite–smectite). Porosity is relatively constant; a decrease in primary porosity downward is approximately balanced by an increase in secondary porosity, with significant microporosity in authigenic and diagenetic clays. K-feldspar is almost completely absent below 5500 feet (1675 m). Fibrous illite is relatively abundant above this depth and variable in abundance below. The K–Ar ages of the clays increase with depth, from 40 m.y. at the top of the sampled section to 55 m.y. at the base, indicating illitization of a precursor smectite at approximately the 100 °C isotherm. Samples with abundant fibrous illite have relatively smaller age values. Mass balance calculations indicate that dissolution of K-feldspar, illitization of smectite and precipitation of fibrous illite were coupled. These reactions suggest the transport of dissolved potassium upward hundreds of feet (100–300 m) in the section, possibly associated with water driven vertically by the migration of gas.  相似文献   

16.
Geological evidence for overpressure is common worldwide, especially in petroleum-rich sedimentary basins. As a result of an increasing emphasis on unconventional resources, new data are becoming available for source rocks. Abnormally high values of pore fluid pressure are especially common within mature source rock, probably as a result of chemical compaction and increases in volume during hydrocarbon generation. To investigate processes of chemical compaction, overpressure development and hydraulic fracturing, we have developed new techniques of physical modelling in a closed system. During the early stages of our work, we built and deformed models in a small rectangular box (40 × 40 × 10 cm), which rested on an electric flatbed heater; but more recently, in order to accommodate large amounts of horizontal shortening, we used a wider box (77 × 75 × 10 cm). Models consisted of horizontal layers of two materials: (1) a mixture of equal initial volumes of silica powder and beeswax micro-spheres, representing source rock, and (2) pure silica powder, representing overburden. By submerging these materials in water, we avoided the high surface tensions, which otherwise develop within pores containing both air and liquids. Also we were able to measure pore fluid pressure in a model well. During heating, the basal temperature of the model surpassed the melting point of beeswax (∼62 °C), reaching a maximum of 90 °C. To investigate tectonic contexts of compression or extension, we used a piston to apply horizontal displacements.In experiments where the piston was static, rapid melting led to vertical compaction of the source layer, under the weight of overburden, and to high fluid overpressure (lithostatic or greater). Cross-sections of the models, after cooling, revealed that molten wax had migrated through pore space and into open hydraulic fractures (sills). Most of these sills were horizontal and their roofs bulged upwards, as far as the free surface, presumably in response to internal overpressure and loss of strength of the mixture. We also found that sills were less numerous towards the sides of the box, presumably as a result of boundary effects. In other experiments, in which the piston moved inward, causing compression of the model, sills also formed. However, these were thicker than in static models and some of them were subject to folding or faulting. For experiments, in which we imposed some horizontal shortening, before the wax had started to melt, fore-thrusts and back-thrusts developed across all of the layers near the piston, producing a high-angle prism. In contrast, as soon as the wax melted, overpressure developed within the source layer and a basal detachment appeared beneath it. As a result, thin-skinned thrusts propagated further into the model, producing a low-angle prism. In some experiments, bodies of wax formed imbricate zones within the source layer.Thus, in these experiments, it was the transformation, from solid wax to liquid wax, which led to chemical compaction, overpressure development and hydraulic fracturing, all within a closed system. According to the measurements of overpressure, load transfer was the main mechanism, but volume changes also contributed, producing supra-lithostatic overpressure and therefore tensile failure of the mixture.  相似文献   

17.
Regional extension of a brittle overburden and underlying salt causes differential loading that is thought to initiate the rise of reactive diapirs below and through regions of thin overburden. We present a modern example of a large salt diapir in the Dead Sea pull-apart basin, the Lisan diapir, which we believe was formed during the Quaternary due to basin transtension and subsidence. Using newly released seismic data that are correlated to several deep wells, we determine the size of the diapir to be 13×10 km, its maximum depth 7.2 km, and its roof 125 m below the surface. From seismic stratigraphy, we infer that the diapir started rising during the early to middle Pleistocene as this section of the basin underwent rapid subsidence and significant extension of the overburden. During the middle to late Pleistocene, the diapir pierced through the extensionally thinned overburden, as indicated by rim synclines, which attest to rapid salt withdrawal from the surrounding regions. Slight positive topography above the diapir and shallow folded horizons indicate that it is still rising intermittently. The smaller Sedom diapir, exposed along the western bounding fault of the basin is presently rising and forms a 200 m-high ridge. Its initiation is explained by localized E–W extension due monoclinal draping over the edge of a rapidly subsiding basin during the early to middle Pleistocene, and its continued rise by lateral squeezing due to continued rotation of the Amazyahu diagonal fault.  相似文献   

18.
The Upper Triassic Chang 6 sandstone, an important exploration target in the Ordos Basin, is a typical tight oil reservoir. Reservoir quality is a critical factor for tight oil exploration. Based on thin sections, scanning electron microscopy (SEM), X-ray diffraction (XRD), stable isotopes, and fluid inclusions, the diagenetic processes and their impact on the reservoir quality of the Chang 6 sandstones in the Zhenjing area were quantitatively analysed. The initial porosity of the Chang 6 sandstones is 39.2%, as calculated from point counting and grain size analysis. Mechanical and chemical compaction are the dominant processes for the destruction of pore spaces, leading to a porosity reduction of 14.2%–20.2% during progressive burial. The porosity continually decreased from 4.3% to 12.4% due to carbonate cementation, quartz overgrowth and clay mineral precipitation. Diagenetic processes were influenced by grain size, sorting and mineral compositions. Evaluation of petrographic observations indicates that different extents of compaction and calcite cementation are responsible for the formation of high-porosity and low-porosity reservoirs. Secondary porosity formed due to the burial dissolution of feldspar, rock fragments and laumontite in the Chang 6 sandstones. However, in a relatively closed geochemical system, products of dissolution cannot be transported away over a long distance. As a result, they precipitated in nearby pores and pore throats. In addition, quantitative calculations showed that the dissolution and associated precipitation of products of dissolution were nearly balanced. Consequently, the total porosity of the Chang 6 sandstones increased slightly due to burial dissolution, but the permeability decreased significantly because of the occlusion of pore throats by the dissolution-associated precipitation of authigenic minerals. Therefore, the limited increase in net-porosity from dissolution, combined with intense compaction and cementation, account for the low permeability and strong heterogeneity in the Chang 6 sandstones in the Zhenjing area.  相似文献   

19.
Understanding diagenetic heterogeneity in tight sandstone reservoirs is vital for hydrocarbon exploration. As a typical tight sandstone reservoir, the seventh unit of the Upper Triassic Yanchang Formation in the Ordos Basin (Chang 7 unit), central China, is an important oil-producing interval. Results of helium porosity and permeability and petrographic assessment from thin sections, X-ray diffraction, scanning electron microscopy and cathodoluminescence analysis demonstrate that the sandstones have encountered various diagenetic processes encompassing mechanical and chemical compaction, cementation by carbonate, quartz, clay minerals, and dissolution of feldspar and lithic fragments. The sandstones comprise silt-to medium-grained lithic arkoses to feldspathic litharenites and litharenites, which have low porosity (0.5%–13.6%, with an average of 6.8%) and low permeability (0.009 × 10−3 μm2 to 1.818 × 10−3 μm2, with an average of 0.106 × 10−3 μm2).This study suggests that diagenetic facies identified from petrographic observations can be up-scaled by correlation with wire-line log responses, which can facilitate prediction of reservoir quality at a field-scale. Four diagenetic facies are determined based on petrographic features including intensity of compaction, cement types and amounts, and degree of dissolution. Unstable and labile components of sandstones can be identified by low bulk density and low gamma ray log values, and those sandstones show the highest reservoir quality. Tightly compacted sandstones/siltstones, which tend to have high gamma ray readings and relatively high bulk density values, show the poorest reservoir quality. A model based on principal component analysis (PCA) is built and show better prediction of diagenetic facies than biplots of well logs. The model is validated by blind testing log-predicted diagenetic facies against petrographic features from core samples of the Upper Triassic Yanchang Formation in the Ordos Basin, which indicates it is a helpful predictive model.  相似文献   

20.
This study investigates petrophysical and acoustic properties of experimentally compacted reconstituted samples of seal sequences from the southwestern Barents Sea. The aggregates were collected from drill cuttings of mudstone and shale formations of two exploration wells, 7220/10-1 (Salina discovery) and 7122/7-3 (Goliat field). The washed and freeze-dried samples were characterized for grain size distributions, geochemical analyses, and mineralogical compositions. A total of 25 compaction tests (12 dry and 13 brine-saturated) were performed with a maximum effective vertical stress of 50 MPa. The laboratory measurements demonstrated that petrophysical and acoustic properties of argillaceous sediments can change within a sedimentary basin and even within a given formation. The results show that the collected aggregates from Goliat field are compacted more compared to Salina discovery. The maximum and minimum compaction are measured in samples collected from Snadd and Fuglen formations, respectively. The final porosity of brine-saturated specimens varies between 5% and 22%. The ultrasonic velocity measurements depict that samples with the same porosity values can have a broad range of velocity values. The resulting compaction trends in this study were compared to published compaction curves for synthetic mixtures of quartz and clay. All compaction trends show higher porosity reduction than the silt fraction with 100% quartz. Comparison of experimental compaction result of each mudstone and shale aggregate with its corresponding acquired well log data helps to delineate the burial history and exhumation in the study area. A net exhumation of 950 m and 800 m is estimated at Salina and Goliat wells, respectively. The outcomes of this study can provide insights for hydrocarbon prospect discovery in a pre-mature sedimentary basin in terms of exploration and production, and also for geological CO2 storage sites. The experimental results may provide information for well log and seismic interpretation, basin modeling and seal integrity of investigated horizons.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号