共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper presents a two-dimensional numerical study on the nonlinear seismic response of buildings equipped with two types of energy dissipators: Constant Friction Slip Braces (CFSB) and Adding Damping and Stiffness (ADAS). Three types of reinforced concrete buildings with 3, 7 and 15 storeys, representatives of the short-medium- and long-period ranges, are considered. Dissipators are placed in steel diagonal braces in all the floors. The sliding threshold (or yielding) forces for each mechanism are selected using two different criteria: (i) they are taken as 50, 75 and 100 per cent of those generated by the equivalent static lateral forces recommended by the UBC-91 for a ductile moment resisting frame and (ii) they are constant in the whole building (this constant value is chosen equal to the maximum forces obtained with the previous criterion). The input consists of ten recorded earthquakes (normalized with respect to their Housner intensity) corresponding to medium and stiff local soil conditions. Average values on the ten registers are given for the maximum horizontal displacement, the base shear, the energy dissipated and the interstorey drift. The possibility of failure in some devices has been numerically simulated to assess the robustness of the system. The obtained results show that both devices are useful to reduce the response compared to the bare frame and that CFSB is more efficient than ADAS; for 7- and 15-storey frames the lateral displacement with CFSB is even smaller than the one for the braced frame (rigid connections instead of dissipators). The conclusions are expected to provide simple design guidelines. © 1998 John Wiley & Sons, Ltd. 相似文献
2.
Sayed Mahmoud Ayman Abd-Elhamed Robert Jankowski 《Bulletin of Earthquake Engineering》2013,11(4):1021-1048
The present paper investigates the coupled effect of the supporting soil flexibility and pounding between neighbouring, insufficiently separated equal height buildings under earthquake excitation. Two adjacent three-storey structures, modelled as inelastic lumped mass systems with different structural characteristics, have been considered in the study. The models have been excited using a suit of ground motions with different peak ground accelerations and recorded at different soil types. A nonlinear viscoelastic pounding force model has been employed in order to effectively capture impact forces during collisions. Spring-dashpot elements have been incorporated to simulate the horizontal and rotational movements of the supporting soil. The results of the numerical simulations, in the form of the structural nonlinear responses as well as the time-histories of energy dissipated during pounding-involved vibrations, are presented in the paper. In addition, the variation in storeys peak responses and peak dissipated energies for different gap sizes are also shown and comparisons are made with the results obtained for colliding buildings with fixed-base supports. Observations regarding the incorporation of the soil-structure interaction and its effect on the responses obtained are discussed. The results of the study indicate that the soil-structure interaction significantly influences the pounding-involved responses of equal height buildings during earthquakes, especially the response of the lighter and more flexible structure. It has been found that the soil flexibility decreases storey peak displacements, peak impact forces and peak energies dissipated during vibrations, whereas it usually leads to the increases in the peak accelerations at each storey level. 相似文献
3.
Shehata E. Abdel Raheem 《Bulletin of Earthquake Engineering》2014,12(4):1705-1724
Post-earthquake damages investigation in past and recent earthquakes has illustrated that the building structures are vulnerable to severe damage and/or collapse during moderate to strong ground motion. Among the possible structural damages, seismic induced pounding has been commonly observed in several earthquakes. A parametric study on buildings pounding response as well as proper seismic hazard mitigation practice for adjacent buildings is carried out. Three categories of recorded earthquake excitation are used for input excitations. The effect of impact is studied using linear and nonlinear contact force model for different separation distances and compared with nominal model without pounding consideration. The severity of the impact depends on the dynamic characteristics of the adjacent buildings in combination with the earthquake characteristics. Pounding produces acceleration and shear forces/stresses at various story levels that are greater than those obtained from the no pounding case, while the peak drift depends on the input excitation characteristics. Also, increasing gap width is likely to be effective when the separation is sufficiently wide to eliminate contact. Furthermore, it is effective to provide a shock absorber device system for the mitigation of impact effects between adjacent buildings with relatively narrow seismic gaps, where the sudden changes of stiffness during poundings can be smoothed. This prevents, to some extent, the acceleration peaks due to impact. The pounding forces exerted on the adjacent buildings can be satisfactorily reduced. 相似文献
4.
This paper presents a detailed study on feasibility of un‐bonded fiber reinforced elastomeric isolator (U‐FREI) as an alternative to steel reinforced elastomeric isolator (SREI) for seismic isolation of un‐reinforced masonry buildings. Un‐reinforced masonry buildings are inherently vulnerable under seismic excitation, and U‐FREIs are used for seismic isolation of such buildings in the present study. Shake table testing of a base isolated two storey un‐reinforced masonry building model subjected to four prescribed input excitations is carried out to ascertain its effectiveness in controlling seismic response. To compare the performance of U‐FREI, same building is placed directly on the shake table without isolator, and fixed base (FB) condition is simulated by restraining the base of the building with the shake table. Dynamic response characteristic of base isolated (BI) masonry building subjected to different intensities of input earthquakes is compared with the response of the same building without base isolation system. Acceleration response amplification and peak response values of test model with and without base isolation system are compared for different intensities of table acceleration. Distribution of shear forces and moment along the height of the structure and response time histories indicates significant reduction of dynamic responses of the structure with U‐FREI system. This study clearly demonstrates the improved seismic performance of un‐reinforced masonry building model supported on U‐FREIs under the action of considered ground motions. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
5.
A new deformation-based design method concerning 3D reinforced concrete (R/C) buildings is presented, which involves the use of advanced analysis tools, i.e. response-history analysis for appropriately scaled input motions, for multiple levels of earthquake action. The critical issues concerning the inelastic response-history analysis used for the design, namely the definition of the appropriate input, the set up of the analytical model that should account for post-yield behaviour of plastic hinge zones, and the direction of loading, are discussed. The proposed method is based on a partially inelastic model, while the design of structural members is carried out for different performance levels related to their inelastic behaviour. The aforementioned method builds on previous proposals by the first author and his co-workers, nevertheless a new procedure for the design of members that are expected to develop inelastic behaviour for the serviceability earthquake is proposed; its aim is the reduction of member design forces and the a-priori definition of their inelastic performance, by exploiting the deformation limits for the specific performance level, which are related to the damage level of the structural members. The proposed method was applied to irregular multistorey R/C 3D frame buildings with setbacks, and their performance for several levels of earthquake action was assessed using a fully inelastic model and additional ground motions not used at the design phase. The same buildings were designed according to the provisions of Eurocode 8. Comparison of the two methods of seismic design, revealed the advantages of the proposed design method, in particular the more economic detailing of transverse reinforcement in the members that develop very little inelastic behaviour even for very strong earthquakes. 相似文献
6.
传统高层建筑地震损伤模型不能反映构件极限滞回耗能随累积幅值的改变情况,无法有效确定组合参数,离散性较大。为此,设计一种远场长周期地震下高层建筑的地震损伤模型。针对不同层次高层建筑结构,依据广义力-广义变形曲线,构建变形损伤模型。结合累积能量比、远场长周期地震瞬时输入能比构建能量损伤模型。从变形与能量两方面综合评价损伤,依据钢筋混凝土结构构建最大反应变形与耗损能量的线性组合地震损伤模型,并对其进行改进。实验选用ILA003、ILA048和TCU115三种长周期地震波,计算不同构件和高层建筑结构整体损伤结果,验证所提模型的可靠性。将所提模型应用于实际高层建筑中,发现其实用性强。 相似文献
7.
地震动输入能量衰减规律的研究 总被引：6，自引：1，他引：6
对所收集到的266条强震记录，将其按场地条件分类，计算了不同场地条件、不同延性系数下的“绝对”和“相对”输入能量反应谱，然后利用两步回归法，得出了不同场地条件下地震动“绝对”和“相对”两种输入能量的衰减规律，分析了场地条件、延性系数、震级及距离等参数对地震动能量谱的影响，并对两种输入能量衰减规律进行了比较。 相似文献
8.
Hossein Mohammadi Vahab Toufigh Ali Akbar Golafshani Ali Arzeytoon 《Bulletin of Earthquake Engineering》2018,16(2):731-752
In this paper, an innovative seismic lateral force resisting system for tall buildings is introduced. In this system, a novel supplemental part, ribbed bracing system (RBSyst), is attached to Braced Tube System, creating a modified BTS. RBSyst is a supplemental part which is attached to the conventional bracing members to eliminate buckling problem. The behavior of RBSyst under tensile force is similar to that of the conventional braces. However, in compression, it prevents the braces from buckling by length reduction. In order to evaluate the efficiency of this new BTS system by performance-based assessment, two typical 40-story tall buildings with different story modules equipped with this proposed bracing system are modeled numerically. Then, the seismic behavior of these 3-dimensional models are evaluated by nonlinear time history analysis under maximum considered earthquakes and service-level earthquakes. The results of the analysis demonstrate that the performance of the tall buildings equipped with this new BTS system is within the acceptable limits under both service-level and maximum considered earthquake ground motions. Additionally, it is shown that RBSyst part can effectively enhance the seismic behavior of BTS systems. 相似文献
9.
During strong earthquakes, adjacent structures with non-sufficient clear distances collide with each other. In addition to such a pounding, cross interaction of adjacent structures through soil can exchange the vibration energy between buildings and make the problem even more complex. In this paper, effects of both of the mentioned phenomena on the inelastic response of selected steel structures are studied. Number of stories varied between 3 and 12 and different clear distances up to the seismic codes prescribed value are considered. The pounding element is modeled within Opensees. A coupled model of springs and dashpots is utilized for through-the-soil interaction of the adjacent structures, for two types of soft soils. The pounding force, relative displacements of stories, story shears, and plastic hinge rotations are compared for different conditions as the maximum responses averaged between seven consistent earthquakes. As a result, simultaneous effects of pounding and structure–soil–structure interaction are discussed. 相似文献
10.
The paper is an attempt to collate field evidence and results from dynamic analysis on possible structural effects of strong vertical ground motion. Observational evidence from three earthquakes are presented and assessed with regard to failure modes of buildings and bridges attributable to high vertical earthquake forces. Analytical results from previous studies for the same structural types are reviewed. These collectively confirm that structural failure may ensue due to direct tension or compression as well as due to the effect of vertical motion on shear and flexural response. 相似文献
11.
12.
《地震工程与工程振动(英文版)》2016,(2)
Open Ground Storey(OGS) framed buildings where the ground storey is kept open without infill walls, mainly to facilitate parking, is increasing commonly in urban areas. However, vulnerability of this type of buildings has been exposed in past earthquakes. OGS buildings are conventionally designed by a bare frame analysis that ignores the stiffness of the infill walls present in the upper storeys, but doing so underestimates the inter-storey drift(ISD) and thereby the force demand in the ground storey columns. Therefore, a multiplication factor(MF) is introduced in various international codes to estimate the design forces(bending moments and shear forces) in the ground storey columns. This study focuses on the seismic performance of typical OGS buildings designed by means of MFs. The probabilistic seismic demand models, fragility curves, reliability and cost indices for various frame models including bare frames and fully infilled frames are developed. It is found that the MF scheme suggested by the Israel code is better than other international codes in terms of reliability and cost. 相似文献
13.
Mehmet Palanci Ali Haydar Kayhan Ahmet Demir 《Bulletin of Earthquake Engineering》2018,16(11):5453-5488
Over the past 20 years, significant socio-economic losses have been encountered in Turkey due to several moderate to large earthquakes. The studies published after the earthquakes concurringly emphasized that multistory reinforced concrete (RC) buildings, mostly 3–7 story ones, collapsed or were heavily damaged as a result of inadequate seismic performance. Global drift ratio demands are mostly used as a representative quantity for determining the behavior of structures when subjected to earthquakes. In this study, three representative mid-rise RC buildings are analyzed by nonlinear time history analysis using code-compatible real ground motion record sets and the calculated global drift ratio demands of these buildings are statistically evaluated. Ground motion record sets compatible with the design spectrum defined for local soil classes in the Turkish Earthquake Code (TEC-2007) are used for the analyses. In order to evaluate the effect of the number of ground motions on drift ratio demands, five different ground motion record sets with 7, 11 and 15 ground motion records are used separately for each local soil class. Results of this study indicate that (1) the dispersion of global drift ratio demands calculated for individual ground motion records in record sets is high, (2) local soil class has no significant effect on dispersion. However, dispersion increases in a direct proportion to the number of ground motion records in a record set, (3) the mean of global drift ratio demands calculated for different ground motion record sets may differ although they are compatible with the same design spectrum, (4) the mean of the drift demands obtained from different ground motion record sets compatible with a particular design spectrum can be accepted as simply random samples of the same population at 95% confidence level. 相似文献
14.
选择台湾集集地震和美国北岭地震的近断层地震动记录作为输入,考察了近断层地震动破裂向前方向性与滑冲效应引起的两种不同速度脉冲运动对单自由度体系和长周期橡胶支座隔震建筑结构抗震性能的影响.反应谱分析表明,破裂向前方向性与滑冲效应对工程结构地震响应的影响是随结构周期变化的.在中短周期段,含破裂向前方向性效应地震动的谱加速度值大于含滑冲效应地震动的谱加速度值;而在长周期段,含滑冲效应地震动的谱加速度大于含破裂向前方向性效应的谱加速度值.并且,与无脉冲地震动作用相比,含破裂向前方向性与滑冲效应脉冲的近断层地震动作用下隔震建筑的地震响应显著增大.滑冲效应引起的速度脉冲使隔震建筑底部的层间变形和楼层剪力明显增大,这意味着滑冲效应脉冲比向前方向性效应脉冲对长周期建筑结构的破坏更具危害性. 相似文献
15.
Major damage has been reported in hilly areas after major earthquakes,primarily because of two special conditions:the variation in the seismic ground motion due to the inclined ground surface and the irregularities caused by a stepped base level in the structure.The aim of this study is to evaluate possible differences in the responses of Chilean hillside buildings through numerical linear-elastic and nonlinear analyses.In the first step,a set of response-spectrum analyses were performed on four simplified 2D structures with mean base inclination angles of 0°,15°,30°,and 45°.The structures were designed to comply with Chilean seismic codes and standards,and the primary response parameters were compared.To assess the seismic performance of the buildings,nonlinear static(pushover)and dynamic(time-history)analyses were performed with SeismoStruct software.Pushover analyses were used to compare the nonlinear response at the maximum roof displacement and the damage patterns.Time-history analyses were performed to assess the nonlinear dynamic response of the structures subjected to seismic ground motions modified by topographic effects.To consider the topographic modification,acceleration records were obtained from numerical models of soil,which were calculated using the rock acceleration record of the Mw 8.01985 Chilean earthquake.Minor differences in the structure responses(roof displacements and maximum element forces and moments)were caused by the topographic effects in the seismic input motion,with the highly predominant ones being the differences caused by the step-back configuration at the base of the structures.High concentrations of shear forces in short walls were observed,corresponding to the walls located in the upper zone of the foundation system.The response of the structures with higher angles was observed to be more prone to fragile failures due to the accumulation of shear forces.Even though hillside buildings gain stiffness in the lower stories,resulting in lower design roof displacement,maximum roof displacements for nonlinear time-history analyses remained very close for all the models that were primarily affected by the drifts of the lower stories.Additionally,vertical parasitic accelerations were considered for half the time-history analyses performed here.The vertical component seems to considerably modify the axial load levels in the shear walls on all stories. 相似文献
16.
山地和平原地形在破坏性地震中对震害和地震动有很大影响,不同地形对地震动有不同的地形效应。为研究山地和平原地形对地震动的影响规律,基于集集地震后续M L6.6余震的强震观测记录,对位于不同地形且与震中位于同一直线上的四个强震台记录处理计算,从波形特征、频谱分析、加速度反应谱计算、与规范谱比较等方面进行对比分析,完成长周期地震动反应谱分布的计算。研究表明,山地地形对地震动的高频成分有地形放大效应,沉积平原对地震动的低频长周期部分有放大作用,并且长周期反应谱的峰值区域始终位于沉积平原中部。平原上强震记录产生的长周期放大系数谱已超出规范谱,沉积平原上长周期建筑的抗震设防应引起重视。 相似文献
17.
While many cases of structural damage in past earthquakes have been attributed to strong vertical ground shaking, our understanding of vertical seismic load effects and their influence on collapse mechanisms of buildings is limited. This study quantifies ground motion parameters that are capable of predicting trends in building collapse because of vertical shaking, identifies the types of buildings that are most likely affected by strong vertical ground motions, and investigates the relationship between element level responses and structural collapse under multi‐directional shaking. To do so, two sets of incremental dynamic analyses (IDA) are run on five nonlinear building models of varying height, geometry, and design era. The first IDA is run using the horizontal component alone; the second IDA applies the vertical and horizontal motions simultaneously. When ground motion parameters are considered independently, acceleration‐based measures of the vertical shaking best predict trends in building collapse associated with vertical shaking. When multiple parameters are considered, Housner intensity (SI), computed as a ratio between vertical and horizontal components of a record (SIV/SIH), predicts the significance of vertical shaking for collapse. The building with extensive structural cantilevered members is the most influenced by vertical ground shaking, but all frame structures (with either flexural and shear critical columns) are impacted. In addition, the load effect from vertical ground motions is found to be significantly larger than the nominal value used in US building design. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
18.
確立地震烈度的標準問題,迄今尚未能够很好地解決,許多不同的情况尚待研究,模型試驗還須要做,然而我們不能等待,國家大規模的建設,正在進行,馬上就需要地震資料,來確定必要的抗震措施,使建立在地震區域內的人民事業得到適當的安全。這個安全係數不能偏於保守,亦不能偏於冒險,在尚沒有很好的科學標 相似文献
19.
The effect of stiffness degradation in reinforced concrete structural members on the inelastic response of multistorey buildings to earthquakes is investigated. In particular, the following question is examined. How do the ductility requirements for multistorey systems with degrading stiffness behaviour compare with those for structures with ordinary bilinear hysteretic property? Inelastic dynamic responses of two idealized multistorey buildings, one having a long and the other a relatively short fundamental period, to an ensemble of twenty simulated earthquakes representative of moderately intense ground motions in California at moderate epicentral distances on firm ground, are analysed for ordinary bilinear hysteretic behaviour and for bilinear hysteretic behaviour with stiffness degradation property. The conclusions deduced from the results of this investigation include the following (1) It is, in general, not possible to predict the maximum response of a degrading stiffness system from results for the corresponding ordinary bilinear system (2) The differences in ductility requirements due to stiffness degradation are generally smaller than those associated with probabilistic variability from one ground motion to another (3) Stiffness degradation has little influence on the ductility requirements for flexible buildings, but it leads to increased ductility requirements for stiff buildings. 相似文献
20.
Nonstructural components(NSCs)are parts,elements,and subsystems that are not part of the primary loadbearing system of building structures but are subject to seismic loading.Damage to NSCs may disrupt the functionality of buildings and result in significant economic losses,injuries,and casualties.In past decades,extensive studies have been conducted on the seismic performance and seismic design methods of NSCs.As the input for the seismic design of NSCs,floor response spectra(FRS)have attracted the attention of researchers worldwide.This paper presents a state-of-the-art review of FRS.Different methods for generating FRS are summarized and compared with those in current seismic design codes.A detailed review of the parameters influencing the FRS is presented.These parameters include the characteristics of ground motion excitation,supporting building and NSCs.The floor acceleration response and the FRS obtained from experimental studies and field observations during earthquakes are also discussed.Three RC frames are used in a case study to compare the peak floor acceleration(PFA)and FRS calculated from time history analyses(THA)with that generated using current seismic design codes and different methods in the literature.Major knowledge gaps are identified,including uncertainties associated with developing FRS,FRS generation methods for different types of buildings,the need for comprehensive studies on absolute acceleration,relative velocity,and relative displacement FRS,and the calibration of FRS by field observations during earthquakes. 相似文献