共查询到20条相似文献,搜索用时 569 毫秒
1.
2.
3.
4.
DSM辅助下城区大比例尺正射影像镶嵌线智能检测 总被引:5,自引:2,他引:3
传统算法以重叠区域色彩(或灰度)差值图像为正射影像镶嵌线检测基础,可以很好地避开色差区域,但对建筑物高密集的城区效果不明显。本文以高精度数字表面模型为检测基础,通过智能识别处理手段对地面区域与非地面区域进行良好区分。传统镶嵌线检测算法都是以迭代运算为基础的智能算法,算法复杂度高。本文发展出一种贪婪蛇型算法,该算法仅与搜索步距、方向旋转间隔、以及重叠区域宽度等三个因素相关,具有速度快,效率高等优点。针对典型的城市区域进行镶嵌线检测实验,结果表明DSM辅助下的城区正射影像镶嵌线能很好地避开房屋等明显地表实体,并且贪婪蛇型算法能有效地进行最优路径检测。 相似文献
5.
基于相关系数的遥感图像拼接线检测算法 总被引:2,自引:0,他引:2
提出了一种基于相关系数方法的遥感影像最佳拼接线的检测算法.该算法根据影像重叠区域内两幅影像对应像素的相关性来判别像素之间纹理差异,结合了影像亮度差异的信息,检测出的镶嵌线优于平分线法检测出的镶嵌线.以4幅相邻影像自动寻找镶嵌线为例进行了实验,取得了良好的效果,验证了算法的实用性与有效性. 相似文献
6.
针对影像密集匹配得到的分块DSM数据,本文提出了一种顾及重叠区地形变化的DSM镶嵌线智能提取算法。该方法利用DSM数据重叠区的高程偏差构建重叠区域的差值影像和差分影像,将经过去噪、拉伸和反向计算的差值影像和差分影像做融合处理。针对融合数据采用基于最小生成树的最优路径搜索方法,提取最优镶嵌线。试验结果表明,使用本算法提取的镶嵌线能有效避开高程差异大的凸出地物,保证地物的完整性,能够解决DSM数据镶嵌过程中镶嵌线的自动选择问题。该方法有效减少了传统镶嵌方法带来的误差,可靠性和稳定性较高。 相似文献
7.
正射影像在影像边缘和覆盖有房屋、树木等地物的区域上表现出投影差,且投影差在不同的影像上不相同。当两幅正射影像镶嵌时,在重叠区域的差分影像上,这些区域表现为高亮度区,理想的镶嵌线应避开此类区域。本文采用贪心搜索方法选择镶嵌线,并改进了最小化最大算法的局部选择方式和判据,在正射影像重叠区域的差分影像上自动搜索镶嵌线。试验表明,改进算法搜索的镶嵌线能够很好地避开投影差大的区域,且具有较好的自适应性。 相似文献
8.
9.
10.
11.
采用Landsat TM数据分析了阿克苏河—塔里木河断面水质污染状况,通过波段的DN值和常规监测数据建立能反映水质状况的
污染物监测模型。结果发现,将2000年常规监测数据代入模型后,与遥感数据的结果基本吻合| 重建阿克苏河—塔里木河的连续水体
污染变化曲线,得出污染物浓度随着远离上游而增加。 相似文献
12.
朱敦尧 《武汉大学学报(信息科学版)》1987,(2)
本文探讨了制约地图符号设计的内在的基本规律,提出了地图符号的约定性原则和等价性原理。把作为地图符号的物质时象同传输过程中的地图符号区别开来,分析了地图符号的价值及价格,并对内涵地图符号和外延地图符号及其相互关系进行了研究,最后提出了新的地图符号分类原理。 相似文献
13.
This paper provides a review of ground-based SAR (GBSAR) interferometry for deformation measurement. In the first part of the paper the fundamentals of this technique are provided. Then the main data processing and analysis stages needed to estimate deformations starting from the GBSAR observations are described. This section introduces the two types of GBSAR acquisition modes, i.e., continuous and discontinuous GBSAR, and reviews the different GBSAR processing and analysis methods published in the literature. This is followed by a discussion of the specific technical aspects of GBSAR deformation measurement. A section then summarizes the pros and cons of GBSAR for deformation monitoring. The last part of the paper includes two reviews: one concerning the GBSAR systems described in the literature, including non-strictly SAR systems and a second one addresses the main GBSAR applications. 相似文献
14.
如何用一种向上的尺度转换方法使得一幅高分辨率的遥感图像经向上尺度转换后可以生成一幅低分辨率的遥感图像,并且使这幅新生成的图像所描述的地物空间关系、空间格局及破碎程度等信息与实际情况下该尺度下的信息保持一致,损失的信息量最少。如何找到这样一种尺度转换的方法是尺度问题中的核心部分,也是遥感中最终要解决的问题。本文一方面结合景观生态学中有关空间分析和尺度转换的方法及最近提出的基于直方变差图的尺度转换方法,对这些方法加以对比并分析了它们各自的优缺点;另一方面在直方变差图的基础上结合分形理论引入了尺度转折点这一概念。通过各个尺度转折点可以确定各个尺度域。。如何找到不同尺度域之间的尺度转换方法将是本研究的重点。本文拟采用的数据为互联网上的IKONOS天安门地区图像。 相似文献
15.
Positions and proper motions obtained from observations by the very large array (VLA) and the multi-element radio-linked interferometer
network (MERLIN) are used to establish the link of the Hipparcos Celestial Reference Frame (HCRF) to the International Celestial
Reference Frame (ICRF). The VLA and MERLIN data are apparently the latest ones published in the literature. Their mean epoch
at around 2001 is about 10 years after the epoch of the Hipparcos catalogue and, therefore, the data are considered suitable
to check the Hipparcos link established at epoch 1991.25. The parameters of the link, i.e., the angles of frame orientation
and the angular rates of frame rotation, are estimated by fitting these parameters to the differences of the optical and radio
positions and proper motions of stars common to the Hipparcos catalogue and the VLA and MERLIN data. Both the estimates of
the angles of orientation and the angular rates of rotation show nearly consistent but insignificant results for all samples
of stars treated. We conclude that not only the size of the samples of 9–15 stars is too small, but also that the accuracy
of the radio positions and, above all, of the radio proper motions is insufficient, the latter being based on early-epoch
star positions of low accuracy. The present observational data at epoch 2001 suggest that maintenance of the Hipparcos frame
is not feasible at this stage. 相似文献
16.
Anko Brner Lorenz Wiest Peter Keller Ralf Reulke Rolf Richter Michael Schaepman Daniel Schlpfer 《ISPRS Journal of Photogrammetry and Remote Sensing》2001,55(5-6)
The consistent end-to-end simulation of airborne and spaceborne earth remote sensing systems is an important task, and sometimes the only way for the adaptation and optimisation of a sensor and its observation conditions, the choice and test of algorithms for data processing, error estimation and the evaluation of the capabilities of the whole sensor system.The presented software simulator SENSOR (Software Environment for the Simulation of Optical Remote sensing systems) includes a full model of the sensor hardware, the observed scene, and the atmosphere in between. The simulator consists of three parts. The first part describes the geometrical relations between scene, sun, and the remote sensing system using a ray-tracing algorithm. The second part of the simulation environment considers the radiometry. It calculates the at-sensor radiance using a pre-calculated multidimensional lookup-table taking the atmospheric influence on the radiation into account. The third part consists of an optical and an electronic sensor model for the generation of digital images. Using SENSOR for an optimisation requires the additional application of task-specific data processing algorithms.The principle of the end-to-end-simulation approach is explained, all relevant concepts of SENSOR are discussed, and first examples of its use are given. The verification of SENSOR is demonstrated. This work is closely related to the Airborne PRISM Experiment (APEX), an airborne imaging spectrometer funded by the European Space Agency. 相似文献
17.
华北GPS网GAMIT计算结果与IGS站选取的关系探讨 总被引:3,自引:0,他引:3
利用GAMIT软件对1999年华北GPS网的观测数据进行了处理,在处理过程中,对IGS站的选取分为:(1)选取15个IGS站;(2)选取6个IGS站;(3)选取3个IGS站;(4)对不选IGS站的四种情况进行了计算,并对四种情况得出的结果从基线向量、测站坐标、基线的重复率和计算所得的均方根的残差nrms四个方面进行了比较,得出了以下结论:使用GAMIT软件处理GPS资料时,最好选取IGS站为区域网提供参考框架;IGS站的选取,数量上不一定最多,但空间分布上应尽量均匀;对华北GPS网,选取6个左右的IGS站即可;多期GPS资料在处理时应尽量选取相同的IGS站进行计算。 相似文献
18.
第二代星载激光雷达冰、云和陆地测高卫星ICESat-2(The Ice, Cloud, and Land Elevation Satellite-2)搭载了先进光子计数式激光雷达,使用了全新的微脉冲多波束光子计数式激光雷达。由于光子计数式激光雷达的自身特点,其光子云数据具有受噪声光子影响大、信噪比与扫描时间相关、光子分布密度不均匀等问题,目前开发的去噪算法并不能很好的应用于不同的光子云数据。基于以上问题,本文提出一种改进的去噪算法,首先分析光子云内部特征并自适应选择最优参数进行粗去噪,然后进行两次精去噪,最后对光子云进行分类并拟合出地面线及冠层顶线,为提取森林冠层高度提供基础。使用该算法对MABEL数据进行去噪实验,实验结果表明:该去噪算法的一次去噪对不同环境下MABEL数据在夜间的去噪平均精确度为94.5%,F1-score为96.3%,日间平均精确度为86.7%,F1-score为91.7%,且三次去噪算法完成后能够显著提升光子云去噪精度。实验证明该算法对MABEL光子云数据具有较好去噪效果和稳定性,可为ICESat-2数据处理提供参考。本文的光子分类算法能够从光子数据中提取冠层顶点、地面点及林内光子并在此算法中进一步精确去除剩余噪点,最终光子分类结果显示该算法能够从复杂光子云数据中提取森林剖面结构。 相似文献
19.