共查询到20条相似文献，搜索用时 31 毫秒
1.
Bearing capacity of two close strip footings on soft clay reinforced with geotextile 总被引：1，自引：1，他引：0
For many years ago, the beneficial effects of using reinforcement to improve the property of soil have been demonstrated. Over the last three decades, the use of polymeric reinforcement such as geotextile has increased in geotechnical engineering. Among the possible applications, earth reinforcement techniques have become useful and economical techniques to solve many problems in geotechnical engineering practice, such as improve the bearing capacity and settlement characteristics of the footing. This research presents the effect of geotextile inclusion on the bearing capacity of two close strip footings located at the surface of soft clay. A broad series of finite element analysis were performed on two footings with width of 1 and 2 m using two-dimensional plane strain model using the computer code Plaxis (ver 8). Only one type of soft clay was used for the analysis, and the soil was represented by two yielding criteria including hardening soil model and Mohr–Coulomb model, while reinforcement was represented by elastic element, and at the interface between the reinforcements and soft clay, interface elements have been used. A wide range of boundary conditions, including unreinforced and reinforced cases, was analyzed by varying parameters such as number of geotextile layers, vertical spacing of layers, depth to topmost layer of geotextile, tensile stiffness of geotextile layers, and distance of between two footings. From numerical results, the bearing capacity ratio and the interference factor of the foundations have been estimated. On the basis of the analysis performed in this research, it can be concluded that there is a best distance between footings and optimum depth for topmost layer to achieve maximum bearing capacity for closely spaced strip footings. The bearing capacity was also found to increase with increasing number of reinforcement layers if the reinforcements were placed within a range of effective depths. In addition, the analysis indicated that increasing reinforcement stiffness beyond a threshold value does not result in a further increase in the bearing capacity. 相似文献
2.
In this paper, an analysis has been presented for calculating the pressure of an adjacent rectangular footing resting on reinforced sand for a given settlement. An approximate method has been suggested to compute the ultimate bearing capacity of adjacent footings resting on reinforced earth slab. The computation of normal force on the reinforcement area and estimation of interfacial friction coefficient at different layer levels are two essential steps in computation of pressure ratio. The process has been simplified by presenting suitable charts in non-dimensional form that can be directly used by practicing engineers. 相似文献
3.
Arvind Kumar Baljit Singh Walia Swami Saran 《Geotechnical and Geological Engineering》2005,23(4):469-481
A method has been proposed to obtain the pressure–settlement characteristics of rectangular footings resting on reinforced sand based on constitutive laws of soils. The confining effect of the reinforcement provided in the soil at different layers has been incorporated in the analysis by considering the equivalent stresses generated due to friction at the soil– reinforcement interface. The prerequisite of the method is the value of ultimate bearing capacity, which can be obtained from the approaches already available in literature. The value of settlement may be read directly from pressure–settlement curves for the given pressure intensity. Therefore, the rectangular footing resting on reinforced sand can be proportioned satisfying shear failure and settlement criteria. 相似文献
4.
Bearing capacity of rectangular footing on reinforced soil 总被引：2，自引：4，他引：2
In the present paper, a method of analysis for calculating the pressure intensity corresponding to a given settlement for
a rectangular footing resting on reinforced soil foundation has been presented. The process has been simplified by presenting
non-dimensional charts for the various terms used in the analysis, which can be directly used by practicing engineers. An
empirical method has been suggested to find out the ultimate bearing capacity of footing on reinforced soil. The results have
been validated with large-scale model tests also. The procedure has been made clear by giving an illustrative example.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
5.
Hamed Gholami Ehsan Seyedi Hosseininia 《Geotechnical and Geological Engineering》2017,35(5):2137-2146
Ring footings can be more effective and economical than circular footings. In spite of similarities between circular and ring footings, their behaviors are different in some respects such as bearing pressure distribution under the footing and settlement. But no exclusive theoretical prediction of ultimate bearing capacity has been reported for ring footings. In the present study, stress characteristics method is employed for coding the bearing capacity of ring footing with horizontal ground surface. In the calculations, friction at the contact between the soil and foundation is considered. In this research, the soil obeys the Mohr–Coulomb yield criterion and that is cohesive–frictional-weighted with applied surcharge pressure. The bearing capacity factors Nγ, Nq and Nc for ring footings were calculated by a written code based on the method of characteristics. Bearing capacity was determined for different conditions of soil and different ratio of radii in comparison with the principle of superposition results. The findings show that the principle of superposition is effective for determining the bearing capacity of a ring footing. 相似文献
6.
The ultimate bearing capacity of strip footings resting on subsoil consisting of a strong sand layer (reinforced/unreinforced)
overlying a low bearing capacity sand deposit has been investigated. Three principal problems were analysed based on results
obtained from the model tests as follows: (1) the effect of stratified subsoil on the foundations bearing capacity; (2) the
effect of reinforcing the top layer with horizontal layers of geogrid reinforcement on the bearing capacity; (3) effect of
reinforcing stratified subsoil (reinforced and unreinforced) on the settlement of the foundation. It has been observed that
reinforcing the subsoil after replacing the top layer of soil with a well-graded soil is beneficial as the mobilization of
soil-reinforcement frictional resistance will increase. 相似文献
7.
土钉墙墙底地基土的承载力验算是土钉墙支护设计的一项重要内容。国内的工程实践中,通常将土钉墙地基承载力与坑底土抗隆起验算合并考虑。针对具体案例,通过Plaxis3D有限元数值模拟,分析研究了土钉墙底部土体发生地基承载力失稳的破坏模式、破坏荷载以及土钉墙墙底应力分布特点等,探讨了依据我国相关规程进行土钉墙坑底隆起或地基承载力计算可能存在的问题。借鉴国外加筋土挡墙地基承载力计算的一般方法,将土钉墙作为荷载倾斜、偏心的刚性基础对待,利用荷载倾斜、偏心条件下传统刚性浅基础的地基承载力的Meyerhof解和Vesic解,对土钉墙地基承载力进行了计算和对比,通过对比发现,Meyerhof解更接近实际,据此,提出了土钉墙地基承载力计算的合理模式。 相似文献
8.
In recent times, rapid urbanisation coupled with scarcity of land forces several structures to come up ever closer to each
other, which may sometime cause severe damage to the structures from both strength and serviceability point of view, and therefore,
a need is felt to devise simplified methods to capture the effect of footing interference. In the present study, an attempt
has been made to model the settlement behaviour of two strip footings placed in close spacing on layered soil deposit consisting
of a strong top layer underlying a weak bottom layer. Theory of elasticity is employed to derive the governing differential
equations and subsequently solved by the finite difference method. The perfectly rough strip footings are considered to be
resting on the surface of two-layer soil system, and the soil is assumed to behave as linear elastic material under a range
of static foundation load. The effect of various parameters such as the elastic moduli and thickness of two layers, clear
spacing between the footings and footing load on the settlement behaviour of closely spaced footings has been determined.
The variation of vertical normal stress at the interface of two different soil layers as well as at the base of the failure
domain also forms an important part of this study. The results are presented in terms of settlement ratio (ξδ), and their variation is obtained with the change in clear spacing between two footings. The present theoretical investigation
indicates that the settlement of closely spaced footings is found to be higher than that of single isolated footing, which
further reduces with increase in the spacing between the footings. 相似文献
9.
《Geomechanics and Geoengineering》2013,8(2):151-162
In this paper, finite element analysis is used to predict the undrained bearing capacity of strip, square and circular footings resting on layered clays. The soil profile consists of two clay layers with different thicknesses and properties. The results are compared with previous solutions for strip footings on layered clays. The bearing-capacity behaviour is discussed and the bearing-capacity factors are given for various cases involving a range of layer thicknesses and properties of the two clay soil layers. 相似文献
10.
L. G. Tham 《Computers and Geotechnics》1988,5(4):249-268
A numerical method is proposed for the analysis of rectangular footing resting on an elastic soil layer. The footing is represented by double spline elements and the elastic soil medium by finite layers. The effect of the rigidity of footing and the non-homogeneity of the soil on the behaviour of such foundation system is investigated, and the results are presented in form of design charts such that they may be used for hand calculation for the estimation of the settlement of footings for a wide range of practical cases. 相似文献
11.
12.
《Geomechanics and Geoengineering》2013,8(3):185-194
In this paper, a model for the analysis of footings having finite flexural rigidity resting on a granular bed on top of stone columns improved saturated soft (clayey) soil has been proposed. Soft soil has been modeled as a Kelvin–Voigt body to represent its time dependent behavior. Pasternak shear layer has been used to represent the granular layer and the stone columns have been idealized by means of nonlinear Winkler springs. Nonlinear behavior of granular fill, soft soil and stone columns has been invoked by means of hyperbolic constitutive relationships. Governing differential equations for the soil–foundation system have been obtained and finite difference method has been adopted for solving these, using the Gauss-elimination iterative scheme. Detailed parametric study for a combined footing has been carried out to study the influence of parameters, like magnitude of applied load, flexural rigidity of footing, diameter of stone column, spacing of stone column, ultimate bearing capacity of granular fill, poor foundation soil and stone column, relative stiffness of stone columns and degree of consolidation, on flexural response of the footing. 相似文献
13.
The limit analysis method has been widely used in the stability analysis of geotechnical problems including the bearing capacity of foundations. Two main approaches have been followed in the limit analysis to improve the calculation of the bearing capacity of foundations. One approach is to combine limit analysis with the finite element method and linear/nonlinear programming. The other is to use a multi-rigid-block mechanism to obtain an upper-bound solution. In this paper, the multi-rigid-block upper-bound method with a modified failure mechanism from that of Florkiewicz [Florkiewicz A. Upper bound to bearing capacity of layered soils. Can Geotech J 1989;26(4):730–6.] was employed to calculate the bearing capacity of foundations. Attention was paid particularly to the bearing capacity of strip footings over a two-layered soil. In order to verify the effectiveness of the modified mechanism, comparisons were made with other well-known solutions. The results showed improvements over the best available multi-rigid-block upper-bound solutions given by Michalowski and Shi [Michalowski RL, Shi L. Bearing capacity of footings over two-layer foundation soils. J Geotech Eng ASCE 1995;121(5):421–8.], and fair consistence with the results from the finite element limit analysis in Shiau et al. [Shiau JS, Lyamin AV, Sloan SW. Bearing capacity of a sand layer on clay by finite element limit analysis. Can Geotech J 2003;40(5):900–15.]. 相似文献
14.
Mohamed S. Remadna Sadok Benmebarek Naima Benmebarek 《Geomechanics and Geoengineering》2017,12(1):1-13
Ring footings are widely used to support structures like silos and storage tanks. Analytical design of safe and economical shallow footings requires the knowledge of the bearing capacity factors N’c and N’γ. The geotechnical design Eurocode 7 provides such factors only for simple geometric shapes like squares, circles or rectangles. Furthermore the N’γ factor has been extensively carried out but the research on the N’c factor hasn’t yet been performed. Thus, the present study aims to provide the first numerical N’c values of a ring footing laying on general c-φ Mohr-Coulomb soil. The results, carried out by using FLAC code, indicate that for rough footings there is an optimal ring which is also dependent of the friction φ. The optimal value of ri/r0 is found to be almost equal to 0.26, 0.33 and 0.46 corresponding respectively to a low, medium and high friction soil. The results also indicate that the soil dilation angle influences the value of N’c when the soil displays high non-associativity for large internal friction angle values. The computational results are presented in the form of design tables and graphs, and compared with previous published results available in the literature. 相似文献
15.
D. T. BergadoJ. C. ChaiN. Miura 《Computers and Geotechnics》1995,17(4):447-471
The behavior of a reinforced embankment on soft Bangkok clay has been analyzed by plane strain finite element method. The finite element analysis considers the selection of proper soil/reinforcement properties according to the relative displacement pattern of upper and lower interface elements. The large deformation phenomenon is simulated by updating the node coordinates, including those of the embankment elements above the current construction level, which ensures that the applied fill thickness simulates the actual field value. A full scale test reinforced embankment with a vertical face (wall) on Bangkok clay has been analyzed by the proposed finite element method, and the numerical results are compared with the field data. The response of a reinforced embankment on soft ground is principally controlled by the interaction between the reinforced soil mass and soft ground and the interaction between the grid reinforcement and the backfill soil. The tension in reinforcement and lateral displacement of the wall face varied during consolidation of foundation soil. The maximum tension force occurred in the reinforcement layer placed at the base of reinforced mass, due to bending of the reinforced mass resulting from differential settlements. It is considered necessary to account for the permeability variation of the soft ground foundation in the finite element analysis. 相似文献
16.
Experimental Study of Bearing Capacity of Granular Soils,Reinforced with Innovative Grid-Anchor System 总被引：1，自引：0，他引：1
Mansour Mosallanezhad Nader Hataf Arsalan Ghahramani 《Geotechnical and Geological Engineering》2008,26(3):299-312
The pull-out resistance of reinforcing elements is one of the most significant factors in increasing the bearing capacity
of geosynthetic reinforced soils. In this research a new reinforcing element that includes elements (anchors) attached to
ordinary geogrid for increasing the pull-out resistance of reinforcements is introduced. Reinforcement therefore consists
of geogrid and anchors with cubic elements that attached to the geogrid, named (by the authors) Grid-Anchor. A total of 45
load tests were performed to investigate the bearing capacity of square footing on sand reinforced with this system. The effect
of depth of the first reinforcement layer, the vertical spacing, the number and width of reinforcement layers, the distance
that anchors are effective, effect of relative density, low strain stiffness and stiffness after local shear were investigated.
Laboratory tests showed that when a single layer of reinforcement is used there is an optimum reinforcement embedment depth
for which the bearing capacity is the greatest. There also appeared to be an optimum vertical spacing of reinforcing layers
for multi-layer reinforced sand. The bearing capacity was also found to increase with increasing number of reinforcement layer,
if the reinforcement were placed within a range of effective depth. The effect of soil density also is investigated. Finally
the results were compared with the bearing capacity of footings on non-reinforced sand and sand reinforced with ordinary geogrid
and the advantages of the Grid-Anchor were highlighted. Test results indicated that the use of Grid-Anchor to reinforce the
sand increased the ultimate bearing capacity of shallow square footing by a factor of 3.0 and 1.8 times compared to that for
un-reinforced soil and soil reinforced with ordinary geogrid, respectively. 相似文献
17.
Ahmad Shlash Alawneh Osama K. Nusier Ahmed Abdul-Ezel Al-Mufty 《Geotechnical and Geological Engineering》2006,24(3):637-660
A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation.
The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective
tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation
to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative
for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions
of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy
soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example
are also presented and discussed. 相似文献
18.
Mete Oner 《国际地质力学数值与分析法杂志》1990,14(9):613-629
Vertical and horizontal deformations of surface footings have been studied for an inhomogeneous elastic half-space in which the shear modulus increases with an arbitrary power of depth, n, and Poisson's ratio is constant. A general solution for displacements has been obtained first for point loads applied in vertical and horizontal directions. These are then used in obtaining closed-form solutions for displacements of uniformly loaded circular and rectangular footings. Finally, a numerical method is described that can be used to analyse a rigid footing of an arbitrary shape, and results for rigid rectangular footings are given. 相似文献
19.
对于地震作用下的土工合成材料加筋土边坡,边坡内部结构的动力响应十分复杂,按照已有的安全系数的方法评价比较困难。结合安全储备系数的原理,并考虑到水平方向和竖直方向地震荷载的共同作用,提出求解加筋土边坡地震稳定性的动点安全系数时程分析方法。在理论分析的基础上,分别定义加筋土边坡土体、土工合成材料和筋-土界面的动点安全系数,并建立数值模型。根据所定义的动点安全系数,在计算过程中使用开发的计算工具对动力响应过程中的动力特性数据进行记录、计算和存储,得到加筋土边坡数值模型在地震荷载作用下的动点安全系数。分析结果表明：动点安全系数时程分析方法具有良好的工程适用性;动点安全系数时程分析方法对复杂的加筋土边坡工程进行的地震稳定性分析考虑了加筋土边坡不同结构的综合稳定性,比现有的分析方法更明确地反应出加筋土边坡工程中相对薄弱的结构,对加筋土边坡工程的抗震设计提供一定参考价值;相比水平方向的地震,竖直方向的地震作用对加筋土边坡中筋材和筋-土界面的稳定性影响较大,但对加筋土边坡土体稳定性影响较小。 相似文献
20.
非均质地基承载力及破坏模式的FLAC数值分析 总被引：3，自引：0，他引：3
利用基于Lagrangian显式差分的FLAC算法，通过数值计算，对黏结力随深度线性增长的非均质地基上条形基础和圆形基础的极限承载力及地基破坏模式进行了对比计算与系统分析。研究表明：（1）随着地基黏结力沿深度非均匀变化系数的增大，地基的破坏范围逐渐集中在地基表层和基础两侧：（2）即使地基的非均质程度较小，当将非均质地基近似地按均质地基考虑时，由此所估算的承载力可能过于保守；（3）地基承载力系数随黏结力沿深度非均匀变化系数的增大而非线性地增大。与数值解相比，skempton与Peck等近似公式均可能高估了非均质地基承载力。 相似文献